Cant get latest update 7.1. on my iPad. Have 5.1.1 now. Have tryed through iTunes and WIFI.
Please help me. Have 5.1.1 on my iPad and it cant find new verson. Have tryed through iTunes and WIFI. But it says that the latest verson 5.1.1 is already installed. But I want The 7.1.1 verson.
You say you have an iPad 2. However, I suspect you may actually have an original iPad. Does your iPad have a camera? If it does not, it is an original iPad and iOS 5.1.1 is the highest version it supports.
Similar Messages
-
Hi guys. After updating to 7.0.6 my iphone 5s is no longer showing in itunes. Strangley it is recognised by my PC (windows 8) when I click on my computer. I have tried reinstalling itunes and making sure the drivers are up to date, but this has made no difference. Has anyone else had this problem or does anyone have any advice? Thanks
Device not detected in iTunes for Windows
-
Hi- I applied the iTunes up to my Windows 7 86bit PC last Wednesday and iTunes will not load due to a Runtime error r6034Access to C Runtime Library Incorrectly. Then I get an windows error code 1114. I have tried rollling back and reinstalling but no joy
Hi Keen itunes User,
Thanks for using Apple Support Communities. This article has steps you can take for the error you're seeing:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
- Ari -
I cannot activate my phone to restore factory setting, I have tried through Itunes but receive the message the message that activation server is temporarily unavailable.
booner2@@@ wrote:
I cannot reactivate my phone, activation server is down, cannot get a response from you at Apple. Please respond.
And you're not going to get a response from Apple on this forum. Again, this is a user-to-user technical support forum.
To contact APPLE support, go to getsupport.apple.com. -
iTunes quits when I'm trying to open it. I have installed the latest version and another user on the same Mac can use their iTunes when they log in. I have tried deleting iTunes and re-installing but it still won't open. Any ideas? Thanks.
Hold down the option key while starting iTunes and make an new library. Will it open then? If so, you have a bad library. With the new library import the library.xml version of the file in your iTunes folder. This will make it 90% like before (some metadata are not identical, but I don't know which ones).
iTunes: How to re-create your iTunes library and playlists - http://support.apple.com/kb/ht1451 -
How on earth do you get Home SHaring to work? We have tried numerous times and it simply doesn't work for us!
Turn it on.
Honestly, if you want help it is generally a good idea to ask a specific question and give some details of what problem is occurring.
If trying to move media, using home sharing is simply a bad idea. Follow some of the other instructions in the article from which the question was posted to move media. -
I can not restore my IPad and I can not update it . I tried with ITunes and with the device as well
Any help. PleaseIt really helps if you describe what is happening, otherwise there is no way to offer meaningful suggestions. Just saying "I can't ..." Doesn't tell us anything helpful.
-
TS3681 I cant get my iphone4 out of recovery mode? Have tried everything please help
I was charging my phone overnight but his morning I aawoke to it being in recovery mode and I have tried all morning to get it out but after several attempts threw itunes it stops and claims I have come across and error 1 still cant fix the problem and need help
That is typically indicates a hardware failure.
Check for hardware issues
Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the alert when you update or restore, contact Apple support.
Common errors: 1, 10-47, 1002, 1011, 1012, 1014, 1000-1020.
Resolve specific iTunes update and restore errors - Support - Apple -
I get a message that an update is available and when I install it the update stops half way through and I get the error code: U44M1I210 for Camera Raw and Elements 13.1 updates. I get the message "UPDATES COULD NOT BE APPLIED" Can someone help with this? Thank you. David
drmeyers381
Thanks for the follow up.
Is your Premiere Elements 13 on Mac computer?
I have not seen much in the way of alternatives coming from Adobe on the Premiere Elements 13.1 failed updates.
But there seems to be several discussions on U44M11210 in the CC products...one
Update failure. (U44M1I210) | Adobe Community
You could try the uninstall, free ccleaner, reinstall with antivirus and firewall(s) and then try for the Help Menu/Update for 13.1..
If Mac, https://www.piriform.com/mac/ccleaner
If Windows, CCleaner - PC Optimization and Cleaning - Free Download
The CC people seem to have the advantage of an online download of their update as well as the one via the Help Menu/Update.
Premiere Elements does not have that perk - update only via Help Menu/Update.
Please review and consider and please let us know of your progress as your schedule permits.
Thank you.
ATR -
Unable to update my iOS software - can't even update to iOS 5 let alone the newer ones. Can't update my music. In setting it doesn't show 'update' as it does in my husbands phone. Can anyone suggest fix??? Can't update either through iTunes.
ThanksThe ability to update directly on the device requires iOS5.
Connect the device to the computer and update it via iTunes.
If you truly desire help, try providing some specifics such as why you cannot update via iTunes. Any errors that are occurring would be a great place to start. -
That's it.
After update the program will not run. No matter which method I choose. I.E. Run as administrator. Double click.
I tried starting multiple windows but when each one get to a few 2000 mbs showing in Taskmaster they re-treat and close down??
Uninstall and re-install the old version and everything is hunky dory?
Well apart from informing me that there is an update available.
Many thanks :)Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Create a new profile as a test to check if your current profile is causing the problem.
See "Creating a profile":
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer files from a previously used profile to the new profile, but be cautious not to copy corrupted files to avoid carrying over problems.
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox -
Any ideas welcome, I need my iphone to sync with my own lap top!
Here's the best place to start -> iOS: Device not recognized in iTunes for Windows.
Did it stop being recognized after updating iTunes?
After taking a look at the document, are you able to start the Apple Mobile Device Service and is the Apple Mobile Device USB Driver is installed?
WTH. -
I have an iPad 2. I use a ZAGG keyboard with it. Since updating to iOS 8, my Bluetooth cannot discover my iPad, so I can't use the keyboard. I updated to iOS 8.2 hoping this would fix the problem. It didn't. I have done several hard reboots following online directions, didn't work. Tried restoring the iPad, didn't work. Is there something else I can do?
FWIW, my Zagg KB works well with my iPAD 2 (IOS 8.1). To my knowledge, there is no 8.2.....
Be sure BT is on. Turn the Zagg KB on. Go to the system area (Bluetooth). Press the connect button on the Zagg. Highlight the device. It should connect.
Barry -
Has anyone seen this issue before?
Possibly. Do you have other devices and will they connect?
One possible thing that it could be is that the USB port on your iPad has gone bad. It happened to mine. Couldn't sync, could barely charge (it said 'not charging' even when plugged into the wall)
I'd take it to the apple store, see if they can replicate it, and if they can, then they can diagnose it. Just back it up before you go, in case they do exchange it. -
not sure where the problem lies but have tried uninstalling itunes and its apps reinstalling latest version but it is the same i can view my iphone as soon as its plugged in via usb when i got to edit music to sync it all appears fine but when i click apply it appears to start syncing for 1sec and then stops with no error messages but my phone remains the same also it wouldn't want to backup either.
so iv tried another pc with itunes and can backup fine but however since updating IOS 7.1 and itunes not letting me backup before i now have lost my apps.
they apper in itunes but it wont sync them back on and my old update from jan can not be found so i checked the directory C:\Users\####\AppData\Roaming\Apple Computer\MobileSync\Backup ---and re added the old backup only to find it wont show it so stuck in same boat Has anyone had this problem and know a solution please help................also must mention i have never had trouble that i couldn't fix on itunes but all of this has started since i have been using icloud for basic backups hope this helps solve problem
Maybe you are looking for
-
Web Dynpro application needs to never expire.
Hi I have a Web Dynpro application (NW2004 SP12) that displays spreadsheet like sales data to anyone who walks past the screen in a common area in the office/s. It should therefore run unattended. It refreshes the data on a timer. The data comes from
-
Setting up 2 External Displays
Hello. I have 2 24 inch external displays both with DVi connections. I have an early MacBook Pro from August 2007. There's only one DVi output on the MacBook. What do I need to allow me to use these external displays with the MacBook Pro. I would lik
-
Format NUMBER fields in SQLPLUS
Hi All, I'm trying to extract a table into a file (fixed-length fields) with SQLPLUS. The column is 'DEPTNO', defined as NUMBER(2), So I did: select to_char(DEPTNO, 'FM09') from table; But this always gave me 3-character long output. I expect it to b
-
I have Photoshop CS6 and Bridge CS6 installed on my MacbookPro, and would like to remove Bridge CS6. I have followed the uninstall instructions for the other CS6 Suite of products I had, but I am unable to find a Bridge CS6 uninstaller. How do I re
-
What do i have to populate in L_TO_CREATE_DN??
Hi, I'm having some problems with the function module L_TO_CREATE_DN. I need to create transfer orders with some items, but I don't know what do I have to complete in the FM. I am populating I_LGNUM and I_VBELN in the importing, but after that I don'