Cant get my smcwusb-g adapter woring
Hi, I have just installed a fresh copy of arch. Everything went smooth except that I cant get my usb wireless adapter to work. I tryed ubuntu pluged it in and it worked just fine using network manager. So I installed network manager and when i plug it in it shows up but says the device is not managed. Its the accton technolgy chipset. Any help would be awesome. Thanks.
ERROR (1)
- Place the iPod in DFU mode and then restore
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- Try on another computer
- Try another cable
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Similar Messages
-
My Macbook pro no longer outputs to my vizio led tv. It was working fine now I cant get any picture. It just says no signal. It is not the hdmi or the adapter because it works fine with my other tv. Any ideas on how to resolve this would be greatly appreciated. Please be as specific as possible. Thanks. BTW--I am using the mini dvi to hdmi adapter in case that was unclear.
Since you say that the same connectors work on your other TV is suggests that the fault is not in the connectors but your Vizio TV. I would check the settings on the Vizio TV. Verify that is is set to receive HDMI input. Perhaps you or some one else has inadvertently changed them. Pressing the wrong buttons on a remote control device can do that. (I am assuming no changes were made in SYSTEM PREFERENCES>DISPLAYS)
Ciao. -
How do I connect my Mac Book Pro to a projector I have the adapter but cant get anything on the screen
Go to your "screen settings". then chose "find screen" then you vill find the prosjector.
this will probably fix your problem.
if this dont works can it be something wrong with your adapter.
hope it helps -
Hey there,
somehow I cant get my Zalman Trimon Monitor to run on my new Mac book pro (2012, Retina). I tried hooking it up with the Dr. Bott Mini Display port Adapter see here ( http://www.google.de/products/catalog?client=safari&rls=en&oe=UTF-8&redir_esc=&q =dr.+bott+mini+displayport&um=1&ie=UTF-8&tbm=shop&cid=9085840057573220630&sa=X&e i=rHMeULWUNo7ysgaZvYGYAg&ved=0CHIQ8gIwBg#ps-sellers )
Neither on my new mac book (with thunderbold) nore with the 2010 Mac book pro 13 inch from my girlfriend both running Mountain Lion, would it work. Does anyone has the same troubles or knows a reason or fix? The monitor definitly works (tried with my old mac book) and this is already the second adapter I use, since I thought maybe the adapter doesnt work!
Help appreciated!Hm, i cannot reproduce the kernel_task thing right now, but this is my temp after working with 2 screens for 10 minutes. is this normal?
100° cpu, 96° on the diode, and 78 on GPU chip? it even was 82 once.
when do i reach critical limits?
apple? -
HP all in one ms237 cant get wireless drivers to work
Hi i have a HP all in one PC, ive had this PC for a very long time, we upgraded to windows 8 and i dont remember how but i did manage to get wireless drivers on it at one point. the PC's hard drive went out and so i bought a new one and re-installed windows 8 (64 bit) onto it and now i cant get wireless drivers to get installed on it. I tried running the drivers with windows 7 compatability but no dice. I also tried different versions of the driver and still no luck, device manager will see the wireless card but says its not working properly (driver issue) the weird thing is that when i uninstall the drivers for it i can see the adapter in adpater settings, however when i install newer drivers and it goes back to being non existent lol. Any ideas?
Hello @rapid3642,
I understand that you are having issues getting your wireless to work on your HP Pavilion All-in-One MS237 Desktop PC running Windows 8. As you probably have already figured out there are no Windows 8 drivers for your computer. I can see why you would have issues installing Windows 7 drivers on a Windows 8 computer. What you probably did initially was upgrade your Windows 7 to Windows 8 with the driver already installed. Unlike a new Windows 8 installation where you need to install the drivers an upgrade will already have drivers installed and the operating system is simply replacing what is needed without having to go through the installation process.
I would recommend that you either install your original Windows 7 and then upgrade to Windows 8 or you may want to look at replacing the 802.11 b/g/n PCI express wireless half-length mini card with one that is compatible with Windows 8.
I hope this helps. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter -
4 hours ago my iphone randomly turned off and now i cant get it to turn back on. Ive tried everything, trying to reset it, charging it but nothing works! the charging symbol doesnt even come up when i plugged in the charger. Please help!
Hello there, LaruaGalliers.
The following Knowledge Base article provides some great troubleshooting steps for your issue:
iPhone and iPod touch: Charging the battery
http://support.apple.com/kb/HT1476
Particularly:
Battery does not charge
Verify that the outlet being used is working.
Try another USB power adapter if available.
If no other USB power adapter is available, try connecting to a high-power USB 2.0 port (not a keyboard). The computer must be turned on and not in sleep or standby mode.
Try another USB cable if available.
iPhone or iPod touch displays the low-battery image and is unresponsive
If you see the image below, charge the iPhone or iPod touch with USB power adapter for at least 15 minutes.
You should see this image when iPhone or iPod touch begins to charge:
If the screen still displays the low-battery icon, try turning the iPhone or iPod touch off and then on again.
If the issue persists, follow these troubleshooting steps.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
Ghost 970 6gb mini display port to Asus pg278Q 144hz cant get to work
I am using a straight mini display port cable to display port no adapter and I can only get 120hz. It seems like it has to do with the fact the monitor is using the intel 4600 gpu instead of the 970m. Is there anyway around this? I changed the setting in nvidia control panel to use it all the time but does not help. Is there any setting I can do?
I cant get 144hz and therefore cannot get g-sync to work. I have searched these forums but cant seem to find a clear answer.Currently none of MSI laptops support G-Sync, only the dock for GS30 supports (because it's actually a desktop).
I heard MSI they are still working on this but not sure if current models can be patched to support G-Sync or only new models support. -
my iphone just stopped working, i cant get it to turn on i tried plugging it into itunes and it still doesnt work, my iphone just stopped working, i cant get it to turn on i tried plugging it into itunes and it still doesnt work
Hello there, LaruaGalliers.
The following Knowledge Base article provides some great troubleshooting steps for your issue:
iPhone and iPod touch: Charging the battery
http://support.apple.com/kb/HT1476
Particularly:
Battery does not charge
Verify that the outlet being used is working.
Try another USB power adapter if available.
If no other USB power adapter is available, try connecting to a high-power USB 2.0 port (not a keyboard). The computer must be turned on and not in sleep or standby mode.
Try another USB cable if available.
iPhone or iPod touch displays the low-battery image and is unresponsive
If you see the image below, charge the iPhone or iPod touch with USB power adapter for at least 15 minutes.
You should see this image when iPhone or iPod touch begins to charge:
If the screen still displays the low-battery icon, try turning the iPhone or iPod touch off and then on again.
If the issue persists, follow these troubleshooting steps.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
I cant get ECWID to work on my mobile devices, it only seems to use the desktop site rather that the Tablet or iPhone? Can anyone help me?
Hi Jim,
We’ll be glad to help you.
Ecwid supports responsive layout, which means that the store pages can adapt to the visitor's screen width on the fly and keep the layout clean and nice. Your products and categories lists will be fit for any window's size, as Ecwid will calculate the most suitable number of products or categories in row automatically. In other words, Ecwid looks great on any mobile devices. You can check how your Ecwid store may look on smartphones and tablets, if you see your Starter Site (what it is).
However, if you want Ecwid reveals itself in all its glory, you should embed your Ecwid store into website, which also support responsive layout, because if the site doesn’t adapt to size screen, Ecwid is not able to determine how it should be changed since it’s just a part of the site.
We’ve checked your site and found that you used Adobe Muse for building your site. Using Adobe Muse, you can create alternate site layouts for web content to be displayed on desktop, smartphones, and tablets. Nonetheless, your site has a layout for desktops only, that’s why it looks the same on all devices. You can learn how to create those alternate layouts in Adobe Muse, by reading “Creating a Website for Mobile Devices” article.
I hope this helps! But if there are any questions, don’t hesitate to reach us out on Ecwid forums. -
HT4061 i cant get my iphone to charge
i cant get my i phone 4 to charge
Hello there, May41975.
The following Knowledge Base article offers up some good recommendations for troubleshooting your issue:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
Help, Connection failed & i cant get up
i recently started using my old, better comp but it refuses to connect to the internet. :-(
in the bottom left of my screen it shows the linksys square but its greyed out and i cant do anything with it but a mouseover says "start here". ive tried restarting the program but nothing happens. in my networks my wireless network is disabled and when i try to enable it, it says "connection failed"
ive enabled windows zero which allowed to get me to get on the internet once but because the wireless network is disabled and i cant enable it i have a very hard time finding the "available networks" screen.
my questions are, 1) is there a way to fix the linksys by means of repairing from this problem?
2) anybody know of a comand prompt or something to bring the available networks up
and 3) i had the same problem on my other computer but had a tiny icon of my wireless which i could just click "repair" on but i cant get the icon down there/cant get the repair option on the network
thanks in advance post if im to vague (im not sure what the problem is and only screwing around for hours led me to find the internet the first time....which i cant remember what i did of coarse lol)Very simple! uninstall the linksys s/w.....insert the setup cd and exit from the welcome screen (DONT CLICK ON CLICK HERE TO START). unplug and replug the adapter. u will get a found new h/w wizard. It will do u want to connect to the inter. Say not this time. It will ask wat u want the wizard to do? select install the s/w automatically. It will install the adapter drivers. Try to detect ur n/w
Linksys Setup CD said "Use Win XP or better"
So i installed Linux -
I am not good with computers. I am trying to get my iTunes onto this new laptop but it says I am only allowed to have it on 5 computers and I must take it off one to ut it on this new laptop. Problem is, apart from my iPad, I have lost one laptop and two have been broken beyond repair so I am unable to take it off! Anyone any ideas? I have tried to get iTunes support but cant get past the "date of purchase" as I can only guess when I bought my ipod (2009)
Hang on...
You can only authorise the songs you purchase from the iTunes Store to play on five computers.
You can download and install iTunes (the iTunes programme) onto as many computers as you wish.
Two different things.
Assuming therefore, that your problem is that you have authorised five computers, but now no longer have some of them, you need to de-authorise all your computers and then re-authorise the computers you still have.
To de-authorise your computers, go to your account in the iTunes Store and look for the Deauthorise All button. -
I tried downloading a free app and it asked for my billing information and when I entered it, it said that there was a billing problem with a previous purchase and I have to update it. I keep updating it and it wont let me verify it and I cant get any apps even if they are free, and I just Deleted some apps to make room for my new upate!
The message says: "The payment method has been denied, try another method"
I'm living in the same country and city since I was born, so I don't think the location is the problem.
And yes, I paid with the card a meal in Burguer King today. And nothing more. -
Basically, i need all my old stuff from my iphone 4 with ios5 onto my new iphone 4. The new phone i received only had ios4. I went to get all my contacts and backup from my old phone onto my new phone and it wont let me because my new phone is only ios4 and my backup from my old phone was in ios5. I cant get ios5 on my phone without creating a new backup of my new phone, which has nothing on it. If i restore it as a new phone and backup virtually nothing from my new phone, will that get rid of all my old backup stuff from my old iphone?
Bottom line is you CANNOT restore to a phone from a backup that has a more recent iOS which is what you're trying to do. Just can't be done.
-
I cant get two monitors to work on one pc.
Does anyone know why i cant get two monitors working on one pc?
I have a HP P6 2000 UKM computer, running windows 7 and it has a DVI D socket as well as the standard VGA (which i am using for my primary monitor) I have got the right DVI to VGA adaptor and have followed various instructions to set up duel disply but every tutorial i have seen says use the multiple display option, but the option dropdown box is not there!
Iv'e tried two different monitors but he same problem. If my graphics card does not suport 2 monitors then why is there a DVI D socket?
Have never had this problem in the past!
Please help.
NobbyHi,
Please post the exact HP product number for your PC.
VGA is analog and DVI-D is digital. If you have two monitors then one of them needs to support a digital video signal if you want to use two monitors
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT
Maybe you are looking for
-
How can I tell if my iPad 5 has A2DP?
How can I tell if my iPad 5 has A2DP?
-
i was was having problems with email and thought let's start from beginning so I dumped my email account which is att using yahoo and this morning I can't get any of my emails or send email, anyine have any ideaS? <Email Edited By Host>
-
Hi i have few problems when downloading pdf to the browser in java and this only happen when i set Content-disposition" = "inline" in my jsp page i have two function 1. click here where will popup another window and will just render the pdf on the ne
-
Ready to take a swandive out the window after my computer!!! Please help!!
I am going nuts. I got an iPod Nano today, and being as I already had the iPod shuffle, I thought I could just hook it up and fly at 'er. But no... I am ready to pitch the computer out the window. I am given a message when I hook the nano up that I n
-
How to get the changed data of an order?
Hi, I'm trying to use BADI ORDER_SAVE to check if the user has changed the status and based on some conditions, I want to avoid saving the order. My problem is that with function moule CRM_READ_ORDER I can only read the "old" (current) information fr