Cant get online when using password
hello i have a question about connecting with airport. for some reason i cant seem to connect at my friends house (where i do most of my work). He gave me the correct password and i can see the port so i know im not out of range. the strange thing is that when i go to an internet cafe that dosent require a password i have no problem getting online.
I tried it at another cafe that gave me their pass and it didnt work again.
seems that when i need a password even if i have the right one i get the internet bars but when i open firefox or safari it says im not connected to the internet. ("not associated with any network")
any ideas or setting i can try to change to get this thing online?
thanks!
Hi t.bot, and a warm welcome to the forums!
Sounds like there might be more than one issue here.
Are any of these you have trouble with a generic name like "linksys" or such?
At your friends house check the IPs and Server of one that is connected & yours that is having trouble...
Find IP on computers...
http://www.helpdesk.umd.edu/topics/communication/ethernet/office/winxp/2882/
Similar Messages
-
im using new ipad 32gb and i cant get user name and password how i configure it ? please give me solution
What do you mean 'can't get user name and password' ? What are you trying to do with your iPad and what happens when you do it ?
-
HT201335 I can only get audio when using airplay through sky go on my apple tv on iphone 4
I cn only get audio when using airplay through sky go on my apple tv on iphone4. Any ideas?
Sky go is an app that does not support video AirPlay, not all apps do.
-
My iPhone was getting hot when used or charging. Went to Apple in Portland, OR. I did a reset on the phone. My IPhone is now making a random sound. Why??? How do I make it stop???? I have turned off all notifications. I do not have life360 or Skype. I do have Facebook, WordsFree, ScrabbleFree, Pandora.
I did the reset. I updated the iPhone to 6.0. The alert sound stopped for a while then started again. I had to go to notifications a few times to turn off some of the alerts and now I have peace, plus I learned more about the notifications. Thanks for your help. I did not need to go to the Apple Store.
-
I dont have and cant get the apple id password for my phone
i dont have and cant get the apple id password for my phone
till whenever i want my iphone give it back to me
i was in Condong Catur Yogyakarta,
my phone number +6287738546695
i will block the imei if no progress in 1 week -
I pad get hot when using or charging what's wrong?
my ipad gets hot when using & charging - what's wrong/ also, the chrger gets hot enough that i unplug it
Not normal. Take it to an Apple Store for evaluation.
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
Cheers, Tom -
why my iphone 4s getting hot when using 3g plus with data?
then my phone left side speaker didnt work when i list songs?It is normal for the phone to get hot when your using data such as YouTube videos, streaming music etc.. And as for the left speaker not working, the left speaker is a microphone, the right one is for sound. Don't worry, everything your iPhone is doing is normal.
-
I cant get call when i turn on my cellular data on iPhone5
I cant get call when i turn on my cellular data on iphone5. My carrier provides only 2G data. Can someone please help me?
Try resetting the iPod by holding the Menu and Center button for about 10 seconds. You should see the screen shut off and come back on with the Apple logo. If that doesn't work you'll want to try to restore the iPod through iTunes.
-
when i'm useing my ipod and i'm useing the instagram app. I feel my ipod starting to get really hot. i am also having problems useing app and them all a sudden closing on me and ipod will return to the home screen
It is not unusual for the to get worm when using some apps.
For the app problem see:
iOS: Troubleshooting applications purchased from the App Store -
When using certificates that have a password enabled and private keys we find the machine hangs up competly with the memory usage jumping to 99%. The main process being the Local Secuirty Authority Process that causes the machine to lock up. The work
around we have is to remove this certificate and import a new certificate making sure we un-tick the check box for private key password.
Not sure if this
KB2813237 is linked, but this hotfix is available for Windows 8.1 Pro OS.Hi Simon,
You can try that suggestion and check whether it is solved and give your result, if there is any other issue, you can post it back.
Regards
Wade Liu
TechNet Community Support -
Getting dump when using do_sum in alv field cat in the output of the report
Dear Freinds,
Iam getting the alv report when i click on the segma field (Sum) on my salary
field iam getting dump. and also if i try to print my alv output iam getting dump , only
happening to my custom report.
i have used the following code pleae correct me .
This perform is used for Layout settings
perform st_layout_build using gs_layout.
form st_layout_build using st_ls_layout type slis_layout_alv.
st_ls_layout-no_input = 'X'.
st_ls_layout-colwidth_optimize = 'X'.
st_ls_layout-zebra = 'X'.
st_ls_layout-detail_popup = 'X'.
endform. " st_layout_build
Field Catalog details
perform st_fieldcat_init changing gt_fieldcat.
form st_fieldcat_init changing fp_i_fieldcat type slis_t_fieldcat_alv.
clear ls_fieldcat.
ls_fieldcat-col_pos = 1.
ls_fieldcat-fieldname = 'ORGUNIT'.
ls_fieldcat-seltext_l = 'Orgunit'.
ls_fieldcat-no_out = 'X'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos = 2.
ls_fieldcat-fieldname = 'ORGTEXT'.
ls_fieldcat-seltext_l = 'Orgdesc'.
ls_fieldcat-no_out = 'X'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-fieldname = 'SALARY'.
ls_fieldcat-seltext_l = 'Salary'.
ls_fieldcat-col_pos = 3.
ls_fieldcat-outputlen = 15.
ls_fieldcat-do_sum = 'X'.
ls_fieldcat-datatype = 'CURR'. "CURR
append ls_fieldcat to fp_i_fieldcat.
endform.
Variant
perform st_variant_init using gs_variant g_repid.
form st_variant_init using st_gs_variant type disvariant
st_repid like sy-repid.
clear st_gs_variant.
st_gs_variant-report = st_repid.
endform. " st_variant_init
g_repid = sy-repid.
perform st_comment_build using gt_list_top_of_page[].
form st_comment_build using st_lt_top_of_page type slis_t_listheader.
data: ls_line type slis_listheader.
Listenüberschrift: Typ H
clear ls_line.
ls_line-typ = 'H'.
LS_LINE-KEY: not used for this type
ls_line-info = text-000.
append ls_line to st_lt_top_of_page.
endform. " st_comment_build
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
i_buffer_active = 'X'
i_callback_top_of_page = 'TOP_OF_PAGE'
i_callback_program = g_repid
is_layout = gs_layout
it_fieldcat = gt_fieldcat[]
i_structure_name = 'i_final' "c_i_final "'objec'
i_save = g_save
is_variant = gs_variant
tables
t_outtab = fp_i_pyrol_final
exceptions
program_error = 1
others = 2.
if sy-subrc ne 0.
message e018. " Displaying the ALV GRID has failed
endif.
Please could any one let me know why iam getting dump when iam clicking for total
on my salary field.
Regards
lathaDear Chandu,
my code iam giving in details
types : begin of ty_output_data,
staffno type pernr_d,
staffname type emnam,
grade type stell,
orgunit type orgeh,
orgtext type hr_mcstext,
psgroup type trfgr, " Pay Scale Group
salary type maxbt, "PAD_AMT7S,
rrefunded type pad_amt7s,
leavepay type pad_amt7s,
mshortfal type pad_amt7s, " Medical Shortfall
echkshfal type pad_amt7s, " Execute checkup shortfall
ofindeduc type pad_amt7s, " Other Finance Deduction
mtyprem type pad_amt7s, " maternity premium
vpbonus type pad_amt7s, " VP/Bonus
gratuity type pad_amt7s, " Gratuity
vpay type pad_amt7s, " Variable pay
mallowance type pad_amt7s, " Meal Allowance
overtime type pad_amt7s, " overtime
other type pad_amt7s, " OTHER
pfundeecon type pad_amt7s, " PFund Employee's Contribution
banktrnsfer type pad_amt7s, " Bank Transfer
count type i,
end of ty_output_data.
data : i_final type standard table of ty_output_data.
iam getting all my data in the internal table I_FINAL.
perform get_final_alv using i_final.
form get_final_alv using fp_i_pyrol_final type ty_t_output_data.
*local variable declarations
data : l_v_idx type sy-tabix.
*local work areas
data : l_wa_final type ty_output_data.
g_save = 'A'.
This perform is used for Layout settings
perform st_layout_build using gs_layout.
Field Catalog details
perform st_fieldcat_init changing gt_fieldcat.
Variant
perform st_variant_init using gs_variant g_repid.
g_repid = sy-repid.
perform st_comment_build using gt_list_top_of_page[].
if not fp_i_pyrol_final is initial.
delete adjacent duplicates from fp_i_pyrol_final comparing all fields.
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
i_buffer_active = 'X'
i_callback_top_of_page = 'TOP_OF_PAGE'
i_callback_program = g_repid
is_layout = gs_layout
it_fieldcat = gt_fieldcat[]
i_structure_name = 'i_final' "c_i_final "'objec'
i_save = g_save
is_variant = gs_variant
tables
t_outtab = fp_i_pyrol_final
exceptions
program_error = 1
others = 2.
if sy-subrc ne 0.
message e018. " Displaying the ALV GRID has failed
endif.
endif.
endform. " get_final_alv
form st_layout_build using st_ls_layout type slis_layout_alv.
st_ls_layout-no_input = 'X'.
st_ls_layout-colwidth_optimize = 'X'.
st_ls_layout-zebra = 'X'.
st_ls_layout-detail_popup = 'X'.
endform. " st_layout_build
form st_fieldcat_init changing fp_i_fieldcat type slis_t_fieldcat_alv.
data: ls_fieldcat type slis_fieldcat_alv.
clear ls_fieldcat.
ls_fieldcat-col_pos = 1.
ls_fieldcat-fieldname = 'ORGUNIT'.
ls_fieldcat-seltext_l = 'Orgunit'.
ls_fieldcat-no_out = 'X'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos = 2.
ls_fieldcat-fieldname = 'ORGTEXT'.
ls_fieldcat-seltext_l = 'Orgdesc'.
ls_fieldcat-no_out = 'X'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos = 5.
ls_fieldcat-fieldname = 'STAFFNAME'.
ls_fieldcat-no_out = 'X'.
ls_fieldcat-seltext_l = 'StaffName'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos = 4.
ls_fieldcat-fieldname = 'STAFFNO'.
ls_fieldcat-no_out = 'X'.
ls_fieldcat-seltext_l = 'StaffNo.'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos = 6.
ls_fieldcat-fieldname = 'GRADE'.
ls_fieldcat-seltext_l = 'Grade'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos = 3.
ls_fieldcat-fieldname = 'COUNT'.
ls_fieldcat-seltext_l = 'Headcount'.
append ls_fieldcat to fp_i_fieldcat.
if the field name is 'Salary' then do a sum on this field.
IF fp_fname = c_betrg.
l_wa_fieldcat-do_sum = c_x.
ENDIF.
NOTE : IAM GETTING PROBLEM IN THE BELOW SALARY.
IAM JUST CHECKING ITSELF NOT ALLOWING ME TO EXECUTE
clear ls_fieldcat.
ls_fieldcat-fieldname = 'SALARY'.
ls_fieldcat-seltext_l = 'Salary'.
ls_fieldcat-col_pos = 7.
ls_fieldcat-outputlen = 20.
ls_fieldcat-do_sum = 'X'.
ls_fieldcat-datatype = 'CURR'. "CURR
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos = 9.
ls_fieldcat-fieldname = 'LEAVEPAY'.
ls_fieldcat-seltext_l = 'Leave Pay'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos = 10.
ls_fieldcat-fieldname = 'MSHORTFAL'.
ls_fieldcat-seltext_l = 'Med.Sfall'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos = 11.
ls_fieldcat-fieldname = 'ECHKSHFAL'.
ls_fieldcat-seltext_l = 'EX.Chckup.Sfall'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos = 12.
ls_fieldcat-fieldname = 'OFINDEDUC'.
ls_fieldcat-seltext_l = 'Oth.Fin.Deduction'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos = 13.
ls_fieldcat-fieldname = 'MTYPREM'.
ls_fieldcat-seltext_l = 'Mat.Premium'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos = 14.
ls_fieldcat-fieldname = 'VPBONUS'.
ls_fieldcat-seltext_l = 'VP/Bonus'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos = 15.
ls_fieldcat-fieldname = 'GRATUITY'.
ls_fieldcat-seltext_l = 'Gratuity'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos = 16.
ls_fieldcat-fieldname = 'VPAY'.
ls_fieldcat-seltext_l = 'Variable Pay'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos = 17.
ls_fieldcat-fieldname = 'MALLOWANCE'.
ls_fieldcat-seltext_l = 'Meal.Allowance'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos = 18.
ls_fieldcat-fieldname = 'OVERTIME'.
ls_fieldcat-seltext_l = 'Overtime'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos = 19.
ls_fieldcat-fieldname = 'OTHER'.
ls_fieldcat-seltext_l = 'Other'.
append ls_fieldcat to fp_i_fieldcat.
pfundeecon
clear ls_fieldcat.
ls_fieldcat-col_pos = 20.
ls_fieldcat-fieldname = 'P FUND EMPLOYEES CONTRIBUTION'.
ls_fieldcat-seltext_l = 'P.Fund.Emp.Contrib'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos = 21.
ls_fieldcat-fieldname = 'BANKTRNSFER'.
ls_fieldcat-seltext_l = 'Payment'.
append ls_fieldcat to fp_i_fieldcat.
endform. " st_fieldcat_init
form st_variant_init using st_gs_variant type disvariant
st_repid like sy-repid.
clear st_gs_variant.
st_gs_variant-report = st_repid.
endform. " st_variant_init
form st_comment_build using st_lt_top_of_page type slis_t_listheader.
data: ls_line type slis_listheader.
Listenüberschrift: Typ H
clear ls_line.
ls_line-typ = 'H'.
LS_LINE-KEY: not used for this type
ls_line-info = text-000.
append ls_line to st_lt_top_of_page.
endform. " st_comment_build
FORM TOP_OF_PAGE *
form top_of_page.
data: l_i_detailheader type slis_t_listheader.
To get the header for ALV
perform detail_header changing l_i_detailheader.
call function 'REUSE_ALV_COMMENTARY_WRITE'
exporting
it_list_commentary = l_i_detailheader.
endform. "top_of_page
form detail_header changing fp_i_detailheader type slis_t_listheader.
data: l_wa_header type slis_listheader,
l_v_time type slis_edit_mask,
l_v_date type slis_edit_mask,
l_v_abkrs type char5,
l_v_pabrj type char8,
l_v_pagno type char10.
Local Constants
constants: l_c_h type char1 value 'H',
l_c_1 type i value '1',
l_c_edit type char10 value '__.__.____',
l_c_slash type c value '/'. " constant for slash
To display the report Header
l_wa_header-typ = l_c_h.
WRITE sy-repid TO l_wa_header-info LEFT-JUSTIFIED.
write text-014 to l_wa_header-info left-justified.
append l_wa_header to fp_i_detailheader.
clear l_wa_header.
To display the Page no
l_v_pagno = sy-pagno + l_c_1.
l_wa_header-typ = c_s.
l_wa_header-key = text-008. " Page No:
l_wa_header-info = l_v_pagno.
append l_wa_header to fp_i_detailheader.
clear l_wa_header.
To Display the User ID
l_wa_header-typ = c_s.
l_wa_header-key = text-009. " User ID
l_wa_header-info = sy-uname.
append l_wa_header to fp_i_detailheader.
clear l_wa_header.
To Display the Date/Time
l_wa_header-typ = c_s.
l_wa_header-key = text-010. " Date/Time:
l_v_time = sy-uzeit.
l_v_date = sy-datum.
write: sy-uzeit to l_v_time.
write sy-datum to l_v_date using edit mask l_c_edit.
concatenate l_v_date
l_c_slash
l_v_time into l_wa_header-info+0(25) separated by space.
append l_wa_header to fp_i_detailheader.
clear: l_wa_header, l_v_date.
To Display the Report Description
l_wa_header-typ = c_s.
l_wa_header-key = text-011. " Report Description
l_wa_header-info = text-012.
append l_wa_header to fp_i_detailheader.
clear l_wa_header.
append l_wa_header to fp_i_detailheader.
endform. " detail_header
I will be greatful if any one can please help me in removing me the dump.
REGARDS
LATHA. -
Why does my dock get stuck when using full screen apps?
When using a full screen app like Safari, if I go back to my desktop and to the dock (which i keep minimized) it stays there when going back to the full screen app. I have to go back to the first page and hover over the dock to get it to go back. Not sure whats going on...
I may not have explained exactly...so basically when i go to the main desktop screen, and open a program or use the dock, it sometimes gets stuck in show mode. Then when i go back to the safari full screen app for instance, the dock stays up, with the latest program highlighted. In order to get the dock to go away, i need to go back to the desktop and hover over the dock again for it to hide.
I really hope someone else is experiencing this because its very annoying and I want apple to fix it quickly -
Why do I get artifacts when using the adjustment brush to increase or decrease exposure?
When using the adjustment brush to darken a background I get white or light colored artifacts. When using the brush to lighten the eyes of a person I get brown artifacts that look like freckles in the area of adjustment. That didn't happen in LR 3.
Here are the screen shots with the original, with Auto Mask on and without Auto Mask.
Thanks to C. Frans W for the suggestion of it being an Auto Mask issue.
Dorin, if you have any other comments, I would welcome them.
If C. Frans W has additional comments those are welcome also. -
After update to Yosemite I can't get online nor can I access app store. My computer is lagging and I get the rainbow wheel
Activity Monitor - Mavericks also Yosemite
Activity Monitor in Mavericks has significant changes
Performance Guide
Why is my computer slow
Why your Mac runs slower than it should
Slow Mac After Mavericks
Things you can do to resolve slowdowns see post by Kappy
Try running this program and then copy and paste the output in a reply. The program was created by Etresoft, a frequent contributor. Please use copy and paste as screen shots can be hard to read.
Etrecheck – System Information -
New Mac Air's FaceTime HD webcam gets stuck when using Skype
Hi all,
I just bought new MacBook Air. I have a problem when I want to video chat with my friends or family on Skype using my FaceTime HD webcam. It gets stuck on a loop after a minute. If I reload it it works for a minute and then it happens again.
I am not using any other programs at the same time when using Skype such as iPhoto or Photo Booth.
I do not know if it is a software or hardware problem. Have anyone experienced the same or anyone knows how to fix it?
Cheers,
KipHi Kip - I have been experiencing the same thing here.
Latest model Macbook Air 13", OSX 10.8.3, Skype 6.3.0.602
It works for the first time for a few minutes, then it will either freeze or do a continuous half second loop. turning video off then on will work for a minute or two, then it will go into the loop again.
I have searched the skype forums and found all sorts of weird suggestions to uninstall, re-install certain versions, delete stuff out off application folders etc, but nothing to reliably fix the issue.
heres the main thread: http://community.skype.com/t5/Mac/Video-Calls-Glitching-Since-Mac-OS-X-10-8-3-an d-Skype-6-3/td-p/1492372/page/2
heres the thread they think and older version of skype works for some people:
http://community.skype.com/t5/Mac/Video-freeze-on-Macbook-Pro-Retina-iSight-v6-3 -0-582/m-p/1489550/highlight/true#M24627
It looks to definately be a skype issue from the forums there, and its just a wait now till Skype can sort it out unfortunately.
Maybe you are looking for
-
How to share my music library with an iPod
I want to share my music with my sons iPhone. He has the 5. What's the easiest way to do this? Thanks
-
Ise: Url redirection not working
everything should be ok on ise and switch the switch is configured with its own ip on the vlan (22) PS is on vlan (44) and ise is configured for web authentication policy to occurr on the logon vlan (33) the service is reachable by inputting the poli
-
Replicating vendors from SRM to ECC
Hi All, We are implementing SRM 7.0 EHP1 and we have a SRM-SUS scenario. We have a requirement where we want to replicate the vendors from SRM to ECC. I know that there are standard programs and interfaces for replicating vendors from ECC to SRM, but
-
Problem with processing idoc cond_a04
Hi all, I m using idoc message COND_A04 to populate and create condition and scale entries for Agreements (MEB1). However, i am getting the following error: "Results of pricing with condition type ZI01 can not be changed" where ZI01 is a condition ty
-
Hey I have a problem. Something must have happened because now when I connect to iTunes my old library is just gone, as if it never exsisted. Now when I connect my iPod it says that my iPod is connected to another account. It's like my established li