Cant get out of SRV Diag Boot

I have a 30gb video ipod. when I try to recharge it, the apple appears very faintly, then it pops into SRV Diag Boot (Mar 01 2006), and no matter how I reset it, it always boots back to the screen, and my computer won't recognize it. I have tried using reset in manual menu, running auto test (no problems detected), running all manual menu tests (no problems detected), performing reset (menu+select). I've also tried to both resets when attached via USB, when plugged into power cord, and unplugged. I've tried it with green eggs and ham...I am desperate. It seems to happen mostly when power is low. In the past it has finally allowed me to reset it, but this time nothing is working. Help!
dell latitude d610 laptop Windows XP Pro

http://www.tuaw.com/2013/05/01/parenting-tip-how-to-exit-out-of-guided-access-wh en-it-locks-up/
When you are stuck in Guided Access mode, you are really stuck as the typical triple tap on the home button to quit out of Guided Access doesn't work. Even a force quit won't work because the power button and the home button are disabled. The only way to get out of Guided Access is to press the Home and Power button together for 15 seconds. This will turn off Guided Access by forcibly rebooting your device. Once your device is restarted, you can then go to Settings > Accessibility > Guided Access > and turn off Guided Access if needed. I usually keep Guided Access off by default and turn it on only when I am handing my iOS device to my children.

Similar Messages

My ipod keeps coming up with srv diag boot

I keep getting this message that the my ipod is in srv diag boot through ipod diagnostics
What do i do?

Perform a hard reset of the device. To do this, first make sure the hold switch is in the Off position, then press and hold both the Select (Center) and Menu buttons together long enough for the Apple logo to appear. This may or may not work the first time around, so don't be afraid to try it more than once if necessary.
B-rock

HT4623 Tied to update to new Apple iphone 5s using window 7. The phone is stuck in the connect to Itune mode cant get out

Tried to update my iphone 5 to new apple sofware, using window 7 operation system phone is stuck in connect to Itunes. Cant get out or use my iphone

Hello erwerw
Check out the first article to force a restore on your iPhone to get it back up and running again. If you get an error code check it against the second article for further troubleshooting.
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
Resolve specific iTunes update and restore errors
http://support.apple.com/kb/ts3694
Regards,
-Norm G.

Stuck on SRV DIag Boot

I tried installing an update but the next time I checked my ipod the following screen appeared;
SRV Diag Boot
SRV Sep 09 2006
Menu : Manual Test
Previous: Auto Test
I have tried both of these options. The auto test gives a green screen and says 'complete' but nothing else. So I try resetting but every time I do it returns to the screen above. What do I do!?!

I have tried the reset again as suggested, toggling the hold switch and then holding down menu and select for 6 seconds. Still returns to the aforementioned page. I tried leaving the ipod to lose battery power; the next time I connected it to my computer itunes said that it was 'in recovery mode' and that this had to be changed before it would connect to itunes. How do I do this?

After ios5 upgrade cant get out to the internet via wireless, it wont get past our Smart Filter (web filter)

I just upgraded my 3GS to IOS5, and now at work when i am connected to our WiFi I can no longer get out to the internet.
A little back story on how it worked prior to ios5:
I would connect via wireless, and then load Safari and type in a webpage I wanted to go to. A pop up box would come up, to authenticate me on our Web filter server (Running Smartfilter), I woudl enter my regular Active Directory username and Password and boom, i could then surf to my hearts content.
After the upgrade, I connect to the wireless, load Safari, type in the webpage i want to go to, and the progress bar moves abotu 3mm and then stops, I never get the smart filter prompt.
I have tried a full reset on the phone, forget network, reset all network settings, I even tried putting in the IP address of the smart filter box as a proxy and still it doesnt work. I have gone to smartfilters website to see if anyone else has posted there, or if there was a clue as to why it doesnt work, but nothing so far.
anyone else having this problem? any ideas?
If it wasnt broken, why would apple mess with it! a LOT of companies run smartfilter as well as other web filters. I thought apple was trying to seduce corporate customers, and so far a lot of poeple are dissapointed that they cant get to the internet.
tha
nks in advance for any assistance.
j

I am having the same problem. The issue also occurs with Safari on Mac OS 10.7. I work for a school and I am sure that other schools are using smartfilter too.

Zen vision M cant get out of recovery m

my zen vision is completely useless!! it is not recognized by any computer, it wont get out of the recovery mode, i cant format because it says hardisk problem, i cant load?firmware because its not recognized by my computer. i am utterly disgusted by this. am i forced to throw this $250 equipment in the garbage. this is unbelievable. WHAT IS THE POINT OF HAVING MODERATORS AND CUSTOMER SERVICE WHEN THEY DONT HELP?? i think my best bet is to switch to an IPOD. CAN SOMEBODY PLEASEEEEE HELP ME.

If you're needing an out of warranty repair, send an email via the email form under "Contact Us" and "Technical Assistance." State clearly you are out of warranty and have a failed hard dri've. Gi've them your product's name, model number, and serial number, and an advisor will reply back with a repair quote and instructions on how and where to ship your player.
Good luck,
Dale

While restoring my iphone3gs it shows error(-1) and cant get out from restore mode,kindly suggest me??

Kindly suggest me how can i get out of the restore mode bcoz whenever i want to do it it shows error (-1) before complition....

Try:
- Powering off and then back on your router.
- Anything else here
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
- Change the DNS to either Google's or Open DNS servers
Public DNS — Google Developers
OpenDNS IP Addresses
- Try on another computer/network
- Wait if it is an Apple problem

HT201250 my mac froze on a grey screen after i tried to login so i tried a safe boot, but now i am stuck in the startup utilities program and i cant get out of it

My mac froze and wouldnt startup because it was forced to sleep while a complex program was running, and simply ended up on a blank grey screen, and this happened upon every startup. so then i tried to use a safe boot but this ended me up on the startup utilities thing. i have realised that none of the options: restore from time machine backup, reinstall osx mountain lion, and repair disk are available to help me startup, and i cant select a startup disk either as it says none are available. so i am stuck on this program and it reapears every time i restart or shutdown and reboot, so i cant do anything. Please is there any way i could either quit startup utilities or get back to my computer desktop as i have lots of non-backed up image and video files that i cant afford to lose. please help!

Maybe this will help.
Startup Grey Screen

Cant get out of CMOS

Hi
Can anyone help me. I have just upgraded my computer. The package included the AMD 64 3000+ 2.0GHz,MSI K8T NEO-FSR, Corsair Value Select PC3200 DDR 512B and can be found at : http://www.komplett.co.uk/k/ki.asp?sku=112188&cks=PRL. I have also purchased a radeon 9800 pro 128. I have plugged all neccesary wires and parts in, and whenever i start the computer up it comes up with message CMOS settings wrong. After this i have no idea what to input. It finds the hard drive and cd drives as well as the graphics card and floppy drives, but will not get passed the boot phase. If i change the settings and save them it just keeps booting and restarting, therefore i restart the pc and start again.
Any information would be much appreciated
Thank you

when i save the settings, the computer reboots, starts up, checks for gigabit etc where you can press tab or F10, then stops. I am starting to think it might actually be the hard drive. Tried it with my old maxtor one which is broken, and it loads up to the point where it goes to a lue screen saying windows/ hard disk broken, then next time it starts up asks me to load in safe mode, but all keys are stuck, this makes me wonder if the new hard drive is broken. Would the pc get as far a cmos and settings if the new hard disk was faulty.
Off to test it on a mates in a bit, see if mine is broken and if his hard disk will boot mine up.
Guess i am running out of things to try. If all fails will have take it somewhere
ps, i think it was after i put the ddr at 333, a new message came up when i turned it on, CMOS/GPNV settings wrong, or something similar to that.
Cheers

Eaqsy question but cant get out. Please help

Hey,
for school i need to learn java. We have had some small projects but here i get stuck. Is there someone who van help me?
There are 3 files below. 2 sub and 1 main.
I need to connect the 2 with eachother and let the main display the info.
Outcome, Lid@addbf1 needs to be Erik, what am i doing wrong??
De titel van het boek is boeka en het is geschreven door auteura.
De titel van het boek is boekb en het is geschreven door auteurb.
De nieuwe titel van het boek is boekaa
[email protected] class Boek {
* (non-javadoc)
private Lid lid;
* Getter of the property <tt>lid</tt>
* @return Returns the lid.
public Lid getLid()
     return lid;
* Setter of the property <tt>lid</tt>
* @param lid The lid to set.
public void setLid(Lid lid ){
     this.lid = lid;
private String titel;
     private String auteur;
     private boolean isUitgeleend;
     private int hoeVaakUitgeleend;
     public Boek (String titel, String auteur) {
          this.titel = titel;
          this.auteur = auteur;
          this.isUitgeleend = false;
          this.hoeVaakUitgeleend = 0;
     public void setTitel (String titel) {
          this.titel = titel;
     public void setAuteur (String auteur) {
          this.auteur = auteur;
     public void setIsUitgeleend (boolean isUitgeleend) {
          this.isUitgeleend = isUitgeleend;
     public void setHoeVaakUitgeleend (int hoeVaakUitgeleend) {
          this.hoeVaakUitgeleend = hoeVaakUitgeleend;
     public String getTitel () {
          return titel ;
     public String getAuteur () {
          return auteur;
     public boolean getIsUitgeleend () {
          return isUitgeleend;
     public int getHoeVaakUitgeleend () {
          return hoeVaakUitgeleend;
}Lid.java
public class Lid {
* (non-javadoc)
private Boek boek;
* Getter of the property <tt>boek</tt>
* @return Returns the boek.
public Boek getBoek()
     return boek;
* Setter of the property <tt>boek</tt>
* @param boek The boek to set.
public void setBoek(Boek boek ){
     this.boek = boek;
public Lid(String naam, String adres){
          this.naam = naam;
          this.adres = adres;
          this.aantalBoeken = 0;
* (non-javadoc)
private int aantalBoeken;
* Getter of the property <tt>aantalBoeken</tt>
* @return Returns the aantalBoeken.
public int getAantalBoeken()
     return aantalBoeken;
* Setter of the property <tt>aantalBoeken</tt>
* @param aantalBoeken The aantalBoeken to set.
public void setAantalBoeken(int aantalBoeken ){
     this.aantalBoeken = 0;
* (non-javadoc)
private String adres;
* Getter of the property <tt>adres</tt>
* @return Returns the adres.
public String getAdres()
     return adres;
* Setter of the property <tt>adres</tt>
* @param adres The adres to set.
public void setAdres(String adres ){
     this.adres = adres;
* (non-javadoc)
private String naam;
* Getter of the property <tt>naam</tt>
* @return Returns the naam.
public String getNaam()
     return naam;
* Setter of the property <tt>naam</tt>
* @param naam The naam to set.
public void setNaam(String naam ){
     this.naam = naam;
BibAdmin.javapublic class BibAdmin {
     * @param args
     public static void main(String[] args) {
          // TODO Auto-generated method stub
          Boek a = new Boek ("boeka", "auteura");
          Boek b = new Boek ("boekb", "auteurb");
          Boek c = new Boek ("boekc", "auteurc");
          Boek d = new Boek ("boekd", "auteurd");
          System.out.println("De titel van het boek is "+a.getTitel()+ " en het is geschreven door "+ a.getAuteur()+ ".");
          System.out.println("De titel van het boek is "+b.getTitel()+ " en het is geschreven door "+ b.getAuteur()+ ".");
          a.setTitel("boekaa");
          System.out.println("De nieuwe titel van het boek is "+a.getTitel());
          Lid e = new Lid ("Erik", "Ronde weg");
          Lid f = new Lid ("Frank", "Vierkante weg");
          Lid g = new Lid ("Gert", "Ovale weg");
          Lid h = new Lid ("Henkjan", "Rechte weg");
          a.setIsUitgeleend(true);
          a.setHoeVaakUitgeleend(+1);
          e.setAantalBoeken(+1);
          a.setLid(e);
          e.setBoek(a);
          System.out.println(a.getLid());

Hmm, i cant edit my post? well nvm, here it is again in correct code!
I get this output., But in sted of Lid@addbf1 i need it to show Erik.
De titel van het boek is boeka en het is geschreven door auteura.
De titel van het boek is boekb en het is geschreven door auteurb.
De nieuwe titel van het boek is boekaa
[email protected]
public class Boek {
private Lid lid;
public Lid getLid() {
     return lid;
public void setLid(Lid lid ){
     this.lid = lid;
private String titel;
     private String auteur;
     private boolean isUitgeleend;
     private int hoeVaakUitgeleend;
     public Boek (String titel, String auteur) {
          this.titel = titel;
          this.auteur = auteur;
          this.isUitgeleend = false;
          this.hoeVaakUitgeleend = 0;
     public void setTitel (String titel) {
          this.titel = titel;
     public void setAuteur (String auteur) {
          this.auteur = auteur;
     public void setIsUitgeleend (boolean isUitgeleend) {
          this.isUitgeleend = isUitgeleend;
     public void setHoeVaakUitgeleend (int hoeVaakUitgeleend) {
          this.hoeVaakUitgeleend = hoeVaakUitgeleend;
     public String getTitel () {
          return titel ;
     public String getAuteur () {
          return auteur;
     public boolean getIsUitgeleend () {
          return isUitgeleend;
     public int getHoeVaakUitgeleend () {
          return hoeVaakUitgeleend;
}Lid.java
public class Lid {
private Boek boek;
public Boek getBoek()
     return boek;
public void setBoek(Boek boek ){
     this.boek = boek;
public Lid(String naam, String adres){
          this.naam = naam;
          this.adres = adres;
          this.aantalBoeken = 0;
private int aantalBoeken;
public int getAantalBoeken()
     return aantalBoeken;
public void setAantalBoeken(int aantalBoeken ){
     this.aantalBoeken = 0;
private String adres;
public String getAdres()
     return adres;
public void setAdres(String adres ){
     this.adres = adres;
private String naam;
public String getNaam()
     return naam;
public void setNaam(String naam ){
     this.naam = naam;
}}BibAdmin.java
public class BibAdmin {
      * @param args
     public static void main(String[] args) {
          // TODO Auto-generated method stub
          Boek a = new Boek ("boeka", "auteura");
          Boek b = new Boek ("boekb", "auteurb");
          Boek c = new Boek ("boekc", "auteurc");
          Boek d = new Boek ("boekd", "auteurd");
          System.out.println("De titel van het boek is "+a.getTitel()+ " en het is geschreven door "+ a.getAuteur()+ ".");
          System.out.println("De titel van het boek is "+b.getTitel()+ " en het is geschreven door "+ b.getAuteur()+ ".");
          a.setTitel("boekaa");
          System.out.println("De nieuwe titel van het boek is "+a.getTitel());
          Lid e = new Lid ("Erik", "Ronde weg");
          Lid f = new Lid ("Frank", "Vierkante weg");
          Lid g = new Lid ("Gert", "Ovale weg");
          Lid h = new Lid ("Henkjan", "Rechte weg");
          a.setIsUitgeleend(true);
          a.setHoeVaakUitgeleend(+1);
          e.setAantalBoeken(+1);
          a.setLid(e);
          e.setBoek(a);
          System.out.println(a.getLid());
}

My mini i pad has frozen. I cant turn it off and the screen doesnt function. It has frozen with a message on the screen saying ive run out of storage in i cloud and has two boxes for either close or settings But i cant get out of this screen Any ideas?

Hi
My mini i pad has frozen. I cant turn it off or opporate the screen. I have a nessage on screan telling me my storage is full in i cloud but I cant navigate to settings or close

Try this to get rid of the message.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

Cant get out of recovery and computer wont recognize pla

i currenly have the 30gb zen sleek photo. somehow the player is always launched into recovery mode and so i tried using the guides to help me through. it says to get new firmware, which i have tried. the only problem with this is when i plug my mp3 player into the usb hub it will not recognize it, saying for me to please connect it to the computer. i am stuck at this point and would love any help or suggestions.

If oje of these programs will not kick the iPod out of recovery mode you will have to restore via iTunes and thus erase the iPod.
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
or
http://joshuabailey1997.wordpress.com/2010/09/02/recboot-v1-3/
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
and
RecBoot tip
RecBoot may have problems on 64X windows, then try:
Tenorshare ReiBoot – Enter & Exit iPhone, iPad, iPod Recovery Mode with a Single Click
For MAC or PC
The Firmware Umbrella - TinyUmbrella
Installs blootware on PC too

I-cloud backup prompt and I cant get out of it why?

My i-touch has a prompt on the screen saying that I need to back up my i-pod, which I have done on the computer - the message does not disapear. I cant press OKAY nothing works. What can I do?

Genieo does not play videos. It's an adware app. Sounds like you tried to download something from a shady site that redirected you to Genieo instead of to the (probably fake) app you were trying to download. You need to be more cautious about this sort of thing... where you download apps from is increasingly important these days! There are a lot of scams out there.
As for removal, Strawb268 has you covered... just please, please follow those instructions very carefully, in order, without skipping steps or skimming over anything! I've had a rash of people following those instructions incorrectly and bricking their computers lately. It's fixable, but a pain in the butt.

CANT GET OUT OF SAFE MODE, ZEN TO

hi all,?am having problems with my zen touch, firstly couldnt get the thing to load music,to which i re installed the old, then the?latest firmware for it to see if this would solve the problem. during the upload of the new firmware it said player was rebooting, which it was, but message never vanished fron the pc, and player rebooted in safemode saying it had firm ware problems, have tried to reload firmware via the pc but although pc recognise's that iys connected, when io try to upload new firmware now says player not connected!!!!!!
!!! Very fraustrating :angry:, can anyone please help
!!! Cheers Mark?P.S im not to good on technical terms re computers so laymans terms please!!!!

Hi,
You can also try this registry fix:
Safe boot is administered in the registry:
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SafeBoot\Option]
"OptionValue"=dword:00000001
You can change OptionValue back to 0 the return to normal mode (after reboot).
Kate Li
TechNet Community Support

Help!!! player froze - cant get out of recovery mod

my player just froze, so as usual i pressed the reset button, normally i dont have a problem with this.
However it entered "recovery mode" and none of the 4 options were any good. I tried the rebooting option several times, but still got the same menu.
So i pressed the reset button again, but now its frozen on the "Zen Touch" screen.
It's about 9 months old, why is it doing this? and how can i get it to work again? I'm thinking of sending it back for a replacement, but i dont think i have all of my music backed up, and wont be able to do so if it keeps freezing the way it is.
i only wanted to listen to some jamiroquai!!!
If you can help, please reply!

If you've tried every option in rescue mode and the player still won't start then it has a serious fault. You need to contact Creative Support to get it replaced.

Cant get out of SRV Diag Boot

Similar Messages

Maybe you are looking for