Cant get podcasts on nano pls help!!!

Hi,
I have downloaded 3 podcasts to my itunes and updated the nano but still no luck.
i read somewhere that you go in to music then podcasts appear is this true??
also can the nike podcasts be played on the nano.
please help
Andy

You need to call your network operator and check that you have the correct message centre number in the phone.

Similar Messages

I cant reset my security question pls help me

I cant find the reset your security question pls help me

If you mean that you're aren't getting the reset link as described in the steps half-way down this page : http://support.apple.com/kb/HT5312, then that will only show if you have a rescue email address (which is not the same thing as an alternate email address) set up on your account.
If you aren't getting the link then you don't have a rescue email address, and you won't be able to add one until you can answer your questions - you will need to contact iTunes Support / Apple in your country to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset you can then use the steps half-way down the above HT5312 page to add a rescue email address for potential future use

While doing service in service po we get account assignment error pls help

while doing services in service po we get error account assignment error (se181) pls help to resolve

Hi,
a service line can be never saved WITHOUT the account assignment details (except acc. ***. category U in in the PO item).
In case the table ESLL will have entry but the accounting tables eskl has got no entry or has entries with deletion flag, it would be an inconsistent situation.
You can set on the screen SAPLMLSK 0200 the deletion flag (ESKL-LOEKZ) for your service account assignment, but without entering a new account assignment information the system would not allow you to leave this screen. When you set the deletion flag for service line in the account assignment detail screen, you must enter right afterwards a new account assignment information in order to leave the screen without the error message 06 408.
Regards,
Edit

Cant get into my messages - please help

Hello
I cant get into my messages. I press on messaging and the screen looks like it will go through but then it just returns to my main screen again. My handset is also not receiving texts my friends send me! yet i can bluetooth pics to my handset off other phones - but then it wont let me into the inbox to open them. I have put my sim in another handset and it works fine.
What are my options? if I reset will I lose all the saved picture messages in the sub-folder i have set up in the inbox? Is there anyway I can get to these and save them! please help

My girlfriend was having a similar problem with her N95 phone. I'd spotted a couple of posts like this one, but no solution. Here's how I fixed it...
Used nokia pc suite to back everything up off the phone.
We tried resetting the phone to factory settings using both the option within the phone, and the reset code, but still couldn't access messages.
We then entered *#7370# to reformat the phone, and messages were than accessible.
As we thought might happen, when we restored the full backup in nokia pc suite, the messages couldn't be accessed.
We reformatted the phone a second time, and restored the backup using nokia pc suite again but this time we didn't restore the settings. Messaging was accessible again, the old messages, contacts etc were all there. All that needed setting up again were things like selected ring tones.
Hope that helps.

Send mail OK but get mail no OK.Pls help me!!!!!!!!!!!!!!!!

hi,all
Mailbox of my user can only send message but can't recieve message. My server is installed by Netscape Messaging Server 4.2.
-I used the command reconstruct this mail box but no OK.
-After I delete user on DS by console
-and then mboxutil -d user/muoitv/INBOX
-And the last I create a new user which have the same userid . but the result is bad, it 's the same (no OK to get mail)
-Especialy is if I create the difference userid . This Mail box is OK and if I create the same userid =muoitv .It ' s not OK.
Why?
The error when you send mail to this account :
This Message was undeliverable due to the following reason:
The following destination addresses were unknown (please check
the addresses and re-mail the message):
SMTP <[email protected]>
Please reply to <[email protected]>
if you feel this message to be in error.
- when I check the DS .I see this user.
Pls help me,it very important to me.I haven't found the solution yet now.
Wait for your replies

Log smtp
[17/Dec/2003:08:05:54 +0700] mess-hcm smtpd[16043]: General Error: 20031217080554:SMTP-Router:ProcessAddresses():Multiple LDAP Entries:
User-From: <[email protected]>
[17/Dec/2003:08:05:54 +0700] mess-hcm smtpd[16043]: General Notice: Error-Handler:HQ0LPU01.003:<>:1949:<[email protected]>
[17/Dec/2003:08:05:54 +0700] mess-hcm smtpd[16043]: General Error: Error-Handler:Logging Error:HQ0LPU01.003:Error-Handler:BadReturn
[17/Dec/2003:08:05:54 +0700] mess-hcm smtpd[16043]: General Error: Message-Id: HQ0LPU01.003
[17/Dec/2003:08:05:54 +0700] mess-hcm smtpd[16043]: General Error: Parent: 0
[17/Dec/2003:08:05:54 +0700] mess-hcm smtpd[16043]: General Error: Header-Size: 401
[17/Dec/2003:08:05:54 +0700] mess-hcm smtpd[16043]: General Error: Body-Size: 1546
[17/Dec/2003:08:05:54 +0700] mess-hcm smtpd[16043]: General Error: Header-Flush: 0
[17/Dec/2003:08:05:54 +0700] mess-hcm smtpd[16043]: General Error: Function: Error-Handler
[17/Dec/2003:08:05:54 +0700] mess-hcm smtpd[16043]: General Error: Control-Type: Mail
[17/Dec/2003:08:05:54 +0700] mess-hcm smtpd[16043]: General Error: Priority: 1
[17/Dec/2003:08:05:54 +0700] mess-hcm smtpd[16043]: General Error: Error-Msg-Type: ReturnMessage
[17/Dec/2003:08:05:54 +0700] mess-hcm smtpd[16043]: General Error: Host-From: mess-hcm.vnn.vn [127.0.0.1]
[17/Dec/2003:08:05:54 +0700] mess-hcm smtpd[16043]: General Error: Submitted-Date: Wed, 17 Dec 2003 08:05:54 +0700
[17/Dec/2003:08:05:54 +0700] mess-hcm smtpd[16043]: General Error: Submitted-Via: Error-Handler SMTP <[email protected]>
[17/Dec/2003:08:05:54 +0700] mess-hcm smtpd[16043]: General Error: User-From: SMTP<>
[17/Dec/2003:08:05:54 +0700] mess-hcm smtpd[16043]: General Error: MIME-Encoding:
[17/Dec/2003:08:05:54 +0700] mess-hcm smtpd[16043]: General Error: MTA-Hops: 0
[17/Dec/2003:08:05:54 +0700] mess-hcm smtpd[16043]: General Error: Trace: Error-Handler
[17/Dec/2003:08:05:54 +0700] mess-hcm smtpd[16043]: General Error: Trace: Account-Handler
[17/Dec/2003:08:05:54 +0700] mess-hcm smtpd[16043]: General Error: Trace: SMTP-Router
[17/Dec/2003:08:05:54 +0700] mess-hcm smtpd[16043]: General Error: Trace: Error-Handler
[17/Dec/2003:08:05:54 +0700] mess-hcm smtpd[16043]: General Error: Channel-To: SMTP <[email protected]>
[17/Dec/2003:08:05:54 +0700] mess-hcm smtpd[16043]: General Error: RCPT-Exts:
[17/Dec/2003:08:05:54 +0700] mess-hcm smtpd[16043]: General Error: Diagnostic-Code: 551 User unknown
[17/Dec/2003:08:05:54 +0700] mess-hcm smtpd[16043]: General Error: Error: SMTP-Router:UnknownAccounts (WriteUnknownAcct)
[17/Dec/2003:08:05:54 +0700] mess-hcm smtpd[16043]: General Error: Error-Text: SMTP <[email protected]>
[17/Dec/200:08:05:54 +0700] mess-hcm smtpd[16043]: General Error: Error-Token: mtalocal:DBT_SMTPRtrUnknownAccounts_
[17/Dec/2003:08:05:54 +0700] mess-hcm smtpd[16043]: General Error: Action: failed
[17/Dec/2003:08:05:54 +0700] mess-hcm smtpd[16043]: General Error: Info: NOTICE: BadReturn. Unable to deliver or return to sender.

Won't open, uninstalled, but now cant get the installer to reinstall. help!

PS refused to open and advised an uninstall. DONE.
now cant get the installer to recognise that it has been uninstalled and reinstall

Are you talking about Photoshop CC? If you are wanting to get CC to know you’ve uninstalled Photoshop, then Quit the CC Desktop app, then restart it—this causes it to rescan what is installed, and at that point it should show an Install button next to Photoshop.
And if that doesn't work there are more things to try:
http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.html

I cant get itunes to install. HELP!

WHenever I try to install itunes 7 it gets stuck on the screen saying "valitading install" THen after about 5-10 min an error message 1905 pops up and says "unable to unregister" or something along those lines.
Do I needs to get rid of itunes 4(which is currently on my comp) to upgrade to 7? How would I do this and would I lose all my music?
----OR-----
The reason I am even bothering to upgrade is because I bought the new nano as a gift and would like to put music on it before I give it. My itunes4 doesnt seem to recognize it and it never shows up when I plug it in? If you could tell me how to get around this problem I wouldnt need to upgrade.
If anyone can help me I would really appreciate your time.

You have posted in the iTunes for Mac forums. You will likely get a faster response by posting in the iTunes for Windows forums.
MJ

Upgraded to leopard and Cant delete podcast in itunes please help

after leopard upgrade.....when i try and delete an old played podcast my itunes immediately pops up an error message and says it quit unexpectedly. this happens w. any podcast and i have the current version of itunes, i also recently upgraded to leopard so i dont know if that has something to do with it, but i CAN play music and videos and podcasts, i just cant delete a podcast, or update them?
any help would be great

Good girl.
"though a bit sluggish" 512 to one gig memory is just making it. two gigs you'll be more satisfied or at minimum 1.5 gigs of memory.
1) I can't answer that based upon normal itunes migration. I just keep my mp3 music on hard drives and when I re-do a computer from scratch just copy them over(they are all metatagged) and use the itunes "add to library" function then change the view using itunes, set my equalizer and I'm basically done.
2) Tiger and Leopard bookmark file are interchangeable. user/library/safari/bookmarks. You should always save that file elsewhere and just drag it over to user/library/safari of course the Safari folder is not created until you launch Safari at least once.
3) use Mail's import function, just direct it to where your mailboxes are stored.
4) address book you can do this function and save it after done. In Tiger under user/library/application support/addressbook there will be a file called addressbook.data Now create a new folder(do it on the desktop) and name it TigerData. Copy that addressbook.data file into that new folder. Now re-name that folder to TigerData.abbu in the addressbook program use the file, import, addressbook archive menu item and choose TigerData.abbu Once done save that file for future Leopard installs.

Cant get port forwarding working, please help :(

I bought an airport extreme yesterday, and since then ive been trying to get port forwarding to work. I've set it up before on other routers, and while its always been a hassle, this is the first time where I might just give up and take the router back. I've been searching the boards for solutions, and ive implemented several of them without success, and a call to apple's tech support got me nowhere. Im sure im just using the wrong number or setting somewhere, but I just cant seem to find it.
One suggestion i read was to set up the routers connection to my modem manually, instead of through dhcp. When I switched from dhcp to manual, i noticed all the prior numbers except dns servers stayed entered, so i wrote down the ones from when it was set for dhcp and typed them in. My manual setup is:
I.P.: 68.197.191.59
subnet: 255.255.224.0
router: 68.197.160.1
dns: 167.206.245.68
167.206.245.69
every other setting i left on the default.
the dhcp range is 10.0.1.2 - 200
One entry recommended a static ip. I originally set one up with the dhcp reservation feature, but then another post said your ip should be outside the dhcp range. Not sure if either method is better, but ive set my system with the following static ip:
i.p: 10.0.1.201
subnet: 255.255.254.0 (i was unsure what to enter here, so i chose the same as the routers)
gateway: 10.0.1.1
in port forwarding i made an entry with 60000 for the 4 public/private tcp/udp and an ip of 10.0.1.201 (i have tried many other port numbers in the odd chance that the one i picked at random might have already been in use)
I left every other setting on the defaults. The nat settings (a setting im not familier with) is current set for enabled with the default host box above it empty.
I should mention, my pc is wired to the router. I am using utorrents port checking site, as well as canyouseeme.org. Neither can ever see my port, one simply says not open, the other says connection refused.
I hope someone out there can help me with this, as the router is great with this one exception, and I'd rather not return it.

For starters, it's probably not a bad idea to "factory reset" your device since it sounds like you've had a lot of people giving you different advice. This isn't to say that you've been given *bad advice* but, it may make things easier for a trouble-shooter if you start over from a "known" state.
That said:
You need to setup manual port mapping. The problem is, when somebody from the outside tries to access your computer, the Aiport (for lack of a better analogy) isn't expecting any visitors; so it turns them away. ---That matches what you are seeing from canyouseeme.org etc...
Your error was when you "made an entry with 60000 for the 4 public/private tcp/udp and an ip of 10.0.1.201" Essentially all that will do is make a mapping for one port. Port "60,000" which to my knowledge, isn't used by anything.
You have to tell the Airport specifically what "outside" ports (each and every one) that you want routed to what "inside" ip address.
I use:
Public TCP: 22,80,443,27900,13405
Public UDP: 123,7777-7783, 13405,6881-6999
Private IP Address: 10.0.1.201
Private TCP: 22,80,443,27900,13405
Private UDP: 123,7777-7783, 13405,6881-6999
This enables: telnet, http, ssh, bittorrent and unreal tournament from the outside and routes ANY AND ALL TRAFFIC from those ports to my PC at 10.0.1.201 on the inside.
If I ran AIM, or ICQ or one of those things, then you need to add the ports that that system uses to the list also.

Made site on iWeb, third-party host. How to get podcast on iTunes? HELP!

HELP! I want to put my podcast on iTunes, but am having major trouble figuring out how to do it. Here are the details.
I created a website using iWeb, and it includes a podcast. The website is www.insidestories.info. I am using a non-Apple host, namely BlueHost.com.
I put the first episode of the podcast onto my site. Now I want to make the podcast available on the iTunes store and other podcast directories. iWeb automatically created a subscribe button. I know I need to get the URL for the RSS feed to proceed. So what I did was publish the site, clicked on the "Subscribe" button, and that was the URL that showed up on iTunes (though it said there was no valid feed at that address). Though I'm not sure that's the right URL for the RSS feed. The URL I got was www.insidestories.info/SFAUDIO/Podcast/rss.xml
Anyway, I then tried to submit that URL for the RSS feed -- both to the iTunes store, and also to FeedBurner. Neither one recognizes that URL as having a valid RSS feed. So I'm stuck!
So my questions are: Is that the right URL, or even the right format for the URL for an RSS feed? Or is there something else I need to do to create an RSS Feed, before submitting it to the iTunes store or Feedburner? Once I get the RSS feed validated, I think I understand the steps from there. I really need to get this podcast out there soon. Thanks for any help!
Best regards,
Paul
paulvdc AT gmail DOT com

Place to start is the iTunes tech spec:
http://www.apple.com/itunes/store/podcaststechspecs.html

Cant get on any webpages, need help!

I have an emac running OSX 10.2.8 I have never had any troubles with my emac untl recently. I turned it on one day and all my settings were gone, and I couldnt connect to the internet. I have dsl so I called them and we went through everything and the modem is communicating with the computer fine, but safari, and internet explorer will not let me get onto any websites at all. I called apple and they told me to go to my keychain, pull it out onto the desktop, and it should work fine. Well I cant go to anywebsites, except for nfl.com, and that only lets me look at a page that is 2 months old, something i must have looked at before everything went haywire. Please help!
emac Mac OS X (10.2.x)

any help?

I have a 1st gen i pod touch and i cant get any apps can anyone help?

i have the latest i pod software but i cant download any apps? when i go to the app store it tells me i need the ios 4 software or something but i think my i pod is to old. am i out of luck or can i still get games?

Yes it can. You'll need to purchase and download the 3.1 update using this link.
http://support.apple.com/kb/HT2052
B-rock

Bbm symbol is on screen i cant get rid of it Please Help

My bbm was working fine until last week but now i have a symbol saying i have 2 new bbm messages i have deleted all conversations and contacts and also all emails, facebook notifications and txt messages and i have tried taking the battery out, nothing works and its driving me crazy! can i uninstall and re install or what do i have to do to get rid of the icon??

Have you looked to see if you have any new BBM contact requests?
Any new Group Chat Requests?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

I just don't get it...pls help

I've been using apple computers for years but for some reason i tunes and iphoto do my head in. i'm thnking that I just don't think ike the developers??
This is what i want to do:
Yesterday i was at a birthday party and I took some photos and videos with my iphone (as you do). All i want to do is download the photos and videos to my computor, stick them in a folder (or album I guess you would call it), name the album, and then email the album/folder to a friend.
questions:
1.why does my computor load itunes everytime i connect the phone? What does itunes have to do with photos?
2. if itunes says it's backing up/syncing my phone then is it also doing the downloading of the photos as well?? -ie can i do all that i wnat on itunes?
3. how do you deal with the size issue? (we're talking 7 photos / 5 movies - 461mb)
I'm not dumb...I just seem to have a real block when it comes to the way this software is structured. to me it just seems comlicated when it ought to be simple. Please Help so i can get on top of this once and for all.
my computer - macbook (white) 10.6.8 - 2Ghz intel core 2 Duo
iphone - iphone 5 (7.0)
itunes- 11.1.3 (8)
iphoto - iphoto 09 (8.1.2)

Not sure what these have to do with iPhoto but here goes:
1. iTunes is loading everytime you connect the phone because you didn't tell it not to. It defaults to loading as it's the primary way for getting things onto your phone. Click on your Phone in the iTunes window, then on Summary and then look at the Options pane. Unchek the first one.
2. I would imagine that yes, it's backing up the phone but no you can't use iTunes to do what you want. That back up is heavily compressed.
3. I would first understand that there is no way to email 461 mb anywhere. Sharing video via email is not advisable. Many email services have an attachment limit of 20mb and some a limit of 10mb. As emails are sent through an array of relays, the effective limit is the smallest file size allowed on any of the relays. That means that video is rarely suitable for emailing.
Then there's the whole issue of Codecs and not all machines will have the codecs to play all videos. Plus, folks with slower connections can find it very inconvenient to download large video files.
How would I do ti? Upload it to sharing services like Dropbox or YouSendIt and email a link. This will require that they download the material to their machines to view.
If you don't like iPhoto don't use it. It's not complusory. You can recover photos and videos from your phone with Image Capture (in the Applications Folder)
Regards
TD

[Solved]No X, No Ctrl+Alt+Backspace, cant get to console...HELP!

I did a new install and went for the ext4 option, I installed everything I usually do but went with nvidia-xcofig rather than the usual Xorg -configure, now having set everything up all I get is a blank screen, I cant ctrl alt backspace to get to console and mt laptop just reboots after about 10 seconds or so.
I have Mint installed on another partition hoping that I could get into rc.conf and ! out gdm but ext4 isn't supported! lol
What do I do, I'm well and truely stumped!
I left arch for 4 days as I got tired of things breaking but had to come back, I miss my arch, well until this peach of a problem came up
Thanks
Last edited by Andy Mack (2009-03-10 15:39:08)

What would I need to edit rc.conf for?
to comment out gdm!!
I hope you have installed hal and read the news about disabling autoadddevices, enabling ctrl alt backspace with DontZap etc

Cant get podcasts on nano pls help!!!

Similar Messages

Maybe you are looking for