Cant get processer above 2.3Ghz

Ive got an Athlon 64 3000+ (CG) on a MSI K8N Neo Platinum board with a gig of Kingmax PC4000 Memory. I cant get the computer to boot up (windows BSODs) with the CPU above 2.3Ghz. Ive managed to get the memory up to 512Mhz with the CPUs multiplier set to 9.
Ive got HTT set to 3x, CPU voltage at 1.6V, Memory at 2.75V. The temperature isnt too high (got a venus 12 heatsink)
Got any idea how i could get it higher. Would idealy like to be able to get it up to 2.5Ghz

Ideally I'd like to get up to 4Ghz, but just because I want it doesn't mean the cpu can take it. The 3000+ max out around 2.4 Ghz. Since your fsb is already 256, the next multiplier is 10, which means 2.56 which is out of the question. Unfortunately, the BIOS does not let us choose halves, so you might want to try using clockgen for all nf3 motherboards and set the multiplier to 9.5. You may also have to bump up the vcore to 1.65 to get stability. As always, make sure that prime95 can torture test small fft with no errors. Otherwise, your comp is unstable and could crash at any point. And remember, with your vcore and frequency that high, you may want to see about improving over the stock cooling.

Similar Messages

HT1657 hi ! just rented a movie through an apple tv and it stopped, i cant get it back and when go to check rentals its like in process and nothing is hapening still in process, why is that? can u fix it?

hi ! just rented a movie through an apple tv and it stopped, i cant get it back and when go to check rentals its like in process and nothing is hapening still in process, why is that? can u fix it?

Mr. Churchill - First, to answer your last questions:
Yes, the movie is fully downloaded, all 3.69 GBs.
No the Apple TV has 127.5 GBs of its 144.63 GBs free.
Second, I tried turning the Time Capsule WiFi rounter and Apple TV off (for at least two or three minutes, not the usual 10 seconds recommended) and I still could not move the movie.
Third, I severed the link and set it up again re-synced all 5,103 items back and still when I move the movies to the Apple TV box and Apply it, after 35 seconds it stops the sync and moves it back the the Rented Movies box.
Though I have set my Apple TV to sync with my MacBook Pro I cannot find a way to connect it to other than shared library, but not the "not shared library" (Is this what the Rented Movies are?). Is what Fletch is talking about int the "Rental Movies not showing up on Apple TV" discussion my problem and a solution?
Fletsch
Re: Rental Movies not showing up on Apple TV
Mar 4, 2008 1:58 PM (in response to Mark_Mac)
there are three possibilities: you have not upgraded to version 2.0 or in Summary on the ATV device in iTunes, you should look whether you have it set up to only sync or otherwise disables movie syncing, or you have not paired your Mac to the ATV (on your tv, settings/computers/connect to itunes library - not shared library)
MacMini core duo, Mac OS X (10.4.8)
Or is it something else?

I was in the process of jailbreaking and updating my ipod and when i was updating it,it went into recovery mode and now i cant get it out of recovery mode so what can i do??

i was in the process of jailbreaking and updating my ipod and when i was updating it,it went into recovery mode and now i cant get it out of recovery mode so what can i do??

Go elsewhere:
Jailbreaking voids the Apple warranty and also means that you will not get any support from Apple, including from this Apple forum. Jailbreaking can't be discussed in this Apple forum.
Unauthorized modification of iOS has been a major source of instability, disruption of services, and other issues

I cant get my iphone to show up in my itunes...i downloaded the update last night and now it will not sync at all

I cant get my iphone to show up in my itunes. I downloaded the new update last night and I havent been able to sync it since

See section 5 of TS1538: iOS: Device not recognized in iTunes for Windows.
If that doesn't help it may pay to tear down and reinstall iTunes in the following manner...
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

Apple Please sort out the V 11.1.4 problems as I cant get iTunes to work now. You need to have a new version asap

Please sort out the V 11.1.4 problems as I cant get iTunes to work now. You need to have a new version asap

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

HT5312 I have a new iphone 5c, my apple account is set to an email i no longer use, i cant get past my own security questions, how do i get everything back in order without losing all my stuff?

i have a new iphone 5c and i cant get past the security questions. i made my apple account a while ago with an old email. i created a new apple id with my new email but i dont use it. How do i terminate the account with my new email so i can replace my old email? If i reset my security questions will it delete all my stuff?

You can't delete an iTunes account, but you should be able to change the email address that is on it e.g. by tapping on it in Settings > iTunes & App Store on your phone and logging into it, via the Store > View Account menu option on your computer's iTunes, or via http://appleid.apple.com - you should then be able to put it on your old account.
For your security questions on your old account, if you have a rescue email address (which is not the same thing as an alternate email address) on that account then the steps half-way down this page will give you a reset link on your account : http://support.apple.com/kb/HT5312
If you don't have a rescue email address or don't have access to that email account (you won't be able to add one or change it until you can answer your questions) then you will need to contact iTunes Support / Apple in your country to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset you can then use the steps half-way down the HT5312 link above to add or update your rescue email address for potential future use
Resetting an account's security questions shouldn't affect any of the purchases that you've made on the account.

TS3694 I cant get my ipad 2 out of recovery. The apple icon stays on and nothing happens. I tried restoring it through Itunes but it comes up with a 3194 error code. I have the latest Itunes being 10.6.1.7 and the latest windows update.Can someone please

I cant get my ipad 2 out of recovery. The apple icon stays on and nothing happens. I tried restoring it through Itunes but it comes up with a 3194 error code. I have the latest Itunes being 10.6.1.7 and the latest windows update.Can someone please help?

Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: Data will be lost. You may have to repeat the above many times.

HP all in one ms237 cant get wireless drivers to work

Hi i have a HP all in one PC, ive had this PC for a very long time, we upgraded to windows 8 and i dont remember how but i did manage to get wireless drivers on it at one point. the PC's hard drive went out and so i bought a new one and re-installed windows 8 (64 bit) onto it and now i cant get wireless drivers to get installed on it. I tried running the drivers with windows 7 compatability but no dice. I also tried different versions of the driver and still no luck, device manager will see the wireless card but says its not working properly (driver issue) the weird thing is that when i uninstall the drivers for it i can see the adapter in adpater settings, however when i install newer drivers and it goes back to being non existent lol. Any ideas?

Hello @rapid3642,
I understand that you are having issues getting your wireless to work on your HP Pavilion All-in-One MS237 Desktop PC running Windows 8. As you probably have already figured out there are no Windows 8 drivers for your computer. I can see why you would have issues installing Windows 7 drivers on a Windows 8 computer. What you probably did initially was upgrade your Windows 7 to Windows 8 with the driver already installed. Unlike a new Windows 8 installation where you need to install the drivers an upgrade will already have drivers installed and the operating system is simply replacing what is needed without having to go through the installation process.
I would recommend that you either install your original Windows 7 and then upgrade to Windows 8 or you may want to look at replacing the 802.11 b/g/n PCI express wireless half-length mini card with one that is compatible with Windows 8.
I hope this helps. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Cant get books to ereader

Please can you help?? I have a Kobo Glow ereader and my computer is windows xp. I downloaded adobe digital editions 2.0. I cant get the books from my library to the ereader. when I get digital editions launched and click on library, a pop up tells me it has to close
Adobe Digital Editions 2.0 has encountered a problem and needs to close. Please can you help.

There are lots of issues with ADE2.0. Among others, it doesn't support XP pre SP3, and is flakey on XP SP3.
I suggest you try v1.7.2.
Version 1.7.2, it is a little difficult to find, available on Adobe site for Windows and for Mac.
http://helpx.adobe.com/digital-editions/kb/cant-install-digital-editions.html
The forum software is sometimes corrupting the link above. There shouldn't be a blank in 'editio ns.html'. The following redirects to the same page: http://tinyurl.com/diged172

I cant get live update to work

I have service pack 2 installed and I cant get on live update because it just dosent load any options at the side bar. What do I do?
Thanks for any help

do u not see the yellow line below the address bar see attached:-
Live Update SP2
if so follow:
Quote
it says click on here 4 more options
so click allow blocked options
select yes in clickbox
there they are
if all else fails i suggest u uninstall live update
go to MSI Utility Downloads
and d/load the latest version v3.62 d.17/09/04
which u can then install.
when u run this u should see the screen as above pic

I cant get my imessage to work, i cant get my imessage to work?

i just got my iphone 5 and i had the four but i cant get my i message to work on my five at all

Could you describe what you are trying to do and what the result is? Your description above is not very helpful.

I cant get my webcam to work on my g72

I cant get my webcam to work on my laptop.

Hi,
Also.
Do you have the Google Video Chat Plug-in installed ?
You may have gained this by Installing Chrome if you did not manually download the Installer for Intel Macs Only.
This can conflict with the Flash Plug-in.
See Known Issues and open the bit on Google Talk Plug-in Disables iSight on Mac.
10:16 PM Thursday; October 6, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Cant get itunes to install it keeps saying HRESULT:0x80073712 please help!!!

I cant get itunes to install on my computer. I uninstalled it and now it wont let me reinstall. It keeps saying error HRESULT:0x80073712 please HELP!!

Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
A
1. iOS- Forgotten passcode or device disabled after entering wrong passcode
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. Restoring iPod touch after forgotten passcode
4. What to Do If You've Forgotten Your iPhone's Passcode
5. iOS- Understanding passcodes
6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
7. iOS - Unable to update or restore
Forgotten Restrictions Passcode Help
iPad,iPod,iPod Touch Recovery Mode
You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
You can restore from a backup if you have one from BEFORE you set the restrictions passcode.
Also, see iTunes- Restoring iOS software.

I cant get into my ipod, it keeps saying connect to itunes, but it cant unlock my phone. Please help..

I cant get into my Ipod. It keeps saing "connect to Itunes" Please help..

Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
A
1. iOS- Forgotten passcode or device disabled after entering wrong passcode
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. Restoring iPod touch after forgotten passcode
4. What to Do If You've Forgotten Your iPhone's Passcode
5. iOS- Understanding passcodes
6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
7. iOS - Unable to update or restore
Forgotten Restrictions Passcode Help
iPad,iPod,iPod Touch Recovery Mode
You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
You can restore from a backup if you have one from BEFORE you set the restrictions passcode.
Also, see iTunes- Restoring iOS software.

I cant get into itunes producer keep getting an error my username and password is incorrect. i have made a new one all good still same error any ideas?

I cant get into itunes producer keep getting an error my username and password is incorrect. i have made a new one all good still same error any ideas?

I'm having a very similar problem.
I'm based in the U.K. and am trying to publish an iBook through the iTunes bookstore. I have made my book in iBooks author 2.0. My iTunes is up to date.
When I try and publish the iBook I have passed and ticked the Pre Publish Check; and the Create Account, but when I try and download iTunes Producer through iTunes Connect I'm told "Your Apple ID does not have permission to access iTunes Content."
When I try and re-set my iTunes Store account I'm told "The iTunes Store Account has already applied to distribute content on the iBookstore." Of course it has I just did that.
If I try and sign in to iTunes Connect through the Publishing pane I'm told "Your ID or Password was entered incorrectly." Even though I've just used it to sign into iTunes (and here), so my password and Apple ID work fine elsewhere.
Is my access to the iTunes Connect being delayed while my submission is processed, i.e. the processing of my tax and account details? Or am I stuck in a loop?
If this is still processing (I started this 20 hours ago) I assume that I have to submit the book itself when I can download iTunes Producer at a later date, as I haven't submitted the book yet?
I emailed the problem to iTunes Store and was refered to [email protected], only for them to say they don't read or reply to emails sent to that address??????
I'm not sure which part of the process I've reached - if any. I feel I'm in limbo. I have an iBook ready to go - but where is Apple?
Any help would be most welcome.
Andy

Cant get processer above 2.3Ghz

Similar Messages

Maybe you are looking for