Cant get Security Mode to work on WRT54G

I have everything set up fine.. internet working etc but I cannot get security mode to work.. I go to click on WEP, WPA.. whatever and it just autos back to DISABLED.. Anyone to fix this?

how many computers do you have?
try to use other computers in setting up the security. check also the firmware of your router.make sure you have the latest one.

Similar Messages

HP Phoenix 8-core - how do I get XP Mode to work in Windows 7 64-bit?

My Computer: HP Phoenix 8-core, 12 GB Ram, over 1,000GB hard drive space, Win 7 SP1 with current updates. Downloaded and installed the following: Windows XP Mode with Windows Virtual PC, the hotfix MS provided for AMD multicore, and the MS Hardware-Assisted Virtualization Detection Tool which informed me that my computer does have hardware-assisted virtualization. I have done EVERYTHING Microsoft has advised.
How do I get XP Mode to work?

Frank, thanks for the help. That Microsoft article is the one I read yesterday morning. I again just now went into the BIOS as follows: Security, System Security-Data Execution Prevention AND Virtualization Technology were both enabled. So I saved changes and exited. My computer is running Windows 7 Professional 64-bit.
This is my system information:
OS Name   Microsoft Windows 7 Professional
Version   6.1.7601 Service Pack 1 Build 7601
Other OS Description    Not Available
OS Manufacturer   Microsoft Corporation
System Name   HPPHOENIX
System Manufacturer   Hewlett-Packard
System Model   h9-1100z
System Type   x64-based PC
Processor   AMD FX(tm)-8150 Eight-Core Processor, 3600 Mhz, 4 Core(s), 8 Logical Processor(s)
BIOS Version/Date   AMI Ang_716, 4/5/2012
SMBIOS Version   2.7
Windows Directory   C:\Windows
System Directory   C:\Windows\system32
Boot Device   \Device\HarddiskVolume1
Locale   United States
Hardware Abstraction Layer   Version = "6.1.7601.17514"
User Name   HPPHOENIX\Debbie
Time Zone   Eastern Daylight Time
Installed Physical Memory (RAM)   12.0 GB
Total Physical Memory   11.8 GB
Available Physical Memory   10.2 GB
Total Virtual Memory   23.6 GB
Available Virtual Memory   21.7 GB
Page File Space   11.8 GB
Page File   C:\pagefile.sys
I downloaded and installed the Windows XP Mode. The
I downloaded and installed the Windows Virtual PC. (not the 2007 version-tried that the first time and seen it did not work).
I applied the "fix" for AMD motherboards.
I just tried to install XP Mode again--I got almost to the end, the I got the following error message in a rectangle box:
"Windows XP Mode-Windows Virtual PC
Could not complete Setup. Please try again."
The has happened over 7 times. Yesterday evening before I posted on this forum, I uninstalled, deleted everything, restarting the computer after doing each step, went to website yet again, redownloaded everything again, and tried to install once again. Still the same message. Any help or advice is certainly needed and appreciated. Debbie

Cant get graphics card to work on MS6166 board

Iam tring to install nvidia graphics card(PCI) to my MS6166 mother board but cant get new drivers to work,I have disabled on board graphics via jumper on board but new graphics card still wont work.
HELP!
Anybody had same problem?

Well, have you tried leaving the monitor cable connected to the onboard VGA and tried booting up? Sometimes you need to disable it within BIOS.

Cant get @font-face to work on my new web site

Hi everyone,
I Cant get @font-face to work on my new web site.
I tryed it before on other web sites and it worked just fine.
Here is the code i am using:
CSS:
@charset "utf-8";
@font-face {
font-family:"Caviar Dreams",sans-serif !important;
font-style: normal;
src:url ("../fonts/CaviarDreams.ttf") format('truetype');
src:url("../fonts/CaviarDreams.eot") format('eot');
src: url("../fonts/CaviarDreams.svg") format('svg');
src:url("../fonts/CaviarDreams.woff") format('woff');
src:url("../fonts/CaviarDreams.otf") format('otf');
/* Simple fluid media
Note: Fluid media requires that you remove the media's height and width attributes from the HTML
http://www.alistapart.com/articles/fluid-images/
img, object, embed, video {
max-width: 100%;
/* IE 6 does not support max-width so default to width 100% */
.ie6 img {
width:100%;
Dreamweaver Fluid Grid Properties
dw-num-cols-mobile: 5;
dw-num-cols-tablet: 8;
dw-num-cols-desktop: 10;
dw-gutter-percentage: 25;
Inspiration from "Responsive Web Design" by Ethan Marcotte
http://www.alistapart.com/articles/responsive-web-design
and Golden Grid System by Joni Korpi
http://goldengridsystem.com/
/* Mobile Layout: 480px and below. */
body{
background-image:url(../images/background/wraper_bg.jpg);
background-repeat:no-repeat;
background-attachment:fixed;
background-size:100% 100%;
font-family:"Caviar Dreams", sans-serif !important;
.caviar{
font-family:"Caviar Dreams", Arial, Helvetica, sans-serif ;
.index_bg{
width:100% !important;
height:100% !important;
background:url(../images/graphics/index_bg.png) !important;
background-size:cover !important;
.welcome_image{
position:absolute;
top:35%;
width:95% !important;
margin:2% !important;
.nav{
color:#FFFFFF !important;
font-family:"Britannic Bold" !important;
font-size:14px;
font-weight:lighter !important;
.background_white{
background:rgba(255,255,255,0.7);
.background_black{
background:rgba(0,0,0,0.65);
.background_black_2{
background:#000 !important;
.background_noir{
background:rgba(179,1,1,0.7);
.background_purple{
background:rgba(152,131,201,0.7)!important;
color:#FFFFFF !important;
width:100% !important;
height:25px;
text-decoration:none !important;
font-family:"Caviar Dreams" ;
border:0px !important;
margin:0px !important;
padding:0px !important;
.background_purple:hover{
background:#FFFF00!important;
color:#000 !important;
width:100% !important;
text-decoration:none !important;
font-family:"Caviar Dreams" ;
border:0px !important;
.white{
color:#FFFFFF !important;
.black{
color:rgba(0,0,0,1) !important;
.red{
color:#B30101 !important;
.yellow{
color:#FFFF00 !important;
.black_span{
background:#000000 !important;
color:#FFFFFF !important;
margin:1% !important;
margin-left:5px !important;
padding:5px !important;
.black_span_margin1{
margin-left:0px !important;
.black_span_margin2{
margin-left:0px !important;
.border_white{
border:3px solid #FFFFFF !important;
margin:0px !important;
padding:0px !important;
.border_gold{
border:0px solid #000!important;
margin:0px !important;
padding:0px !important;
h1, h2, h3, h4, h5, h6{
font-family:"Britannic Bold" !important;
font-weight:lighter !important;
color:#FFD700 !important;
margin-left:2% !important;
margin-right:2% !important;
margin-top:2% !important;
margin-bottom:2% !important;
p{
font-family:"Caviar Dreams", Arial, Helvetica, sans-serif !important;
font-size:16px !important;
color:#FFFFFF !important;
margin-left:2% !important;
margin-right:2% !important;
margin-top:2% !important;
margin-bottom:2% !important;
.text-small{
font-size:12px !important;
.caviar{
font-family:"Caviar Dreams" !important;
I am trying to use the font Caviar Dreams on my new web site but i cant get it right,
Can anyone tell me what is wrong.
And also i would like some help with IE9, it seems the header is displaying in blue instead of black on IE9 and 10.
My web site adrees is marcoalexwebdesign.site11.com .

I already fixed the issue, it seems trhat in dreamweaver the fonts ttf , otf, etc must be in a folder named webfonts, and then dreamweaver connects the fonts stylesheet to the main stylesheeet with @inport.I had to unisntall the fonts from my windows and download them again and add tehm with dreamweaver add web fonts feature.
Thanks ayway.

I cant get a DVD to work

I cant get a DVD to work on my MacBook Pro even though I have iDVD!

iDVD is for creating movies on a DVD. Is that what you are trying to do?
For playback of DVDs use DVD Player, or VLC:
http://www.videolan.org/vlc/

I cant get my camera to work it says its on but has no feedback, any ideas?

i cant get my camera to work it says its on but has no feedback, any ideas?

Here are my best suggestions for your camera problem:
• If Apple's http://support.apple.com/kb/HT2090
   suggestions do not help you, (the "reset" suggested there
   often restores normal function,) continue with the following.
• Use your Mac's Disk Utility to repair permissions and then
   download and apply the latest Combo Update for your Mac OS.
   If you are using OS X 10.7 or later, reinstall OS X.
• Repair permissions again immediately following the system restart
   that completes the Combo update or reinstall.
Properly applying the Combo version of updates can sometimes correct software problems, but, if your trouble is caused by a hardware problem, there are no user serviceable parts of the camera. For hardware help, contact Apple or an Apple-Authorized Service Provider for service.
(Over time, Apple has changed the built-in camera's name on newer Macs from "iSight" to "FaceTime" and then to "FaceTime HD." Regardless of the name of your Mac's built-in camera, the same info and troubleshooting applies.)
   Unless you have a current backup, make one now.
Then use the final "Troubleshooting" suggestion:
"... contact Apple or an Apple-Authorized Service Provider for service."

I had my hard drive replaced and I cant get my email to work on the new hard drive. I have the ! in the triangle next to the inbox. I tried "take all accounts online" and it ddidnt work. The email account is working on my iphone and ipad.

I had my hard drive replaced and I cant get my email to work on the new hard drive. I have the ! in the triangle next to the inbox. I tried "take all accounts online" and it ddidnt work. The email account is working on my iphone and ipad, and my macBook is connected to the internet.

Cant get help with this issue on Apple Support, so I have to go to the Apple store to the Genius Bar to get assistance. All the help issues are so technical in their jargon, that I cannot understand how to fix the issue.

I cant get my email to work on my iphone 4

hi, i cant get my email to work on my iphone, iv added my email address and password but when i go to mail there are no emails showing or accounts. my email is showing as on in settings but doesnt seem to be working. any advise would be great, thanks

There is something wrong in your settings. As the settings for each email provider are different you need to check your email server's web site for instructions. Most now have specific instructions for the iPhone. Also see Apple's instructions: http://support.apple.com/kb/HT1385

I cant get the font to work on a picture in Photoshop, I have watched at least 12 how to videos and it wont work, Help

I cant get the font to work on a picture in Photoshop, I have watched at least 12 how to videos and it wont work, Help

Could you capture your screen and post it. Have the layers panel open and any layers that are collapsed, expanded. We will need to see the entire screen, as some information in the tab is important as well.

I cant get google chrome to work on my desk top

i cant get google chrome to work on my desk top

When posting in Apple Communties/Forums/Message Boards.......It would help us to know which iMac model you have, which OS & version you're using, how much RAM, etc. You can have this info displayed on the bottom of every post by completing your system profile and filling in the information asked for.
CLICKY CLICK-----> Help us to help you on these forums
***This will help in providing you with the proper and/or correct solutions.***
===================
Contact Chrome tech support and/or post in their forums.

I cant get my webcam to work on my g72

I cant get my webcam to work on my laptop.

Hi,
Also.
Do you have the Google Video Chat Plug-in installed ?
You may have gained this by Installing Chrome if you did not manually download the Installer for Intel Macs Only.
This can conflict with the Flash Plug-in.
See Known Issues and open the bit on Google Talk Plug-in Disables iSight on Mac.
10:16 PM Thursday; October 6, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

TS2972 cant get home sharing to work any ideas?

cant get home sharing to work. any ideas?

HOME SHARING
Setting up Home Sharing on your Computer
http://support.apple.com/kb/HT4620?viewlocale=en_US&locale=en_US
Understanding > http://support.apple.com/kb/HT3819
How to > http://support.apple.com/kb/HT2688
Troubleshooting > http://support.apple.com/kb/TS2972

Stuck on ask a question page. cant get anything I can work with

I had a page with bookmarks then it all disappeared and now all I have is a page titled at top --- Ask a Question Firefox Support/Mozilla Firefox. there is nothing on the page I can work or remove . I can see the page I want but cannot get to It.

DITTO to what aehplh4423 posted 3 months ago on this thread.
as follows:
"stuck on ask a question page. cant get anything I can work with
I had a page with bookmarks then it all disappeared and now all I have is a page titled at top --- Ask a Question Firefox Support/Mozilla Firefox. there is nothing on the page I can work or remove . I can see the page I want but cannot get to It. "
WHAT'S UP FIREFOX?????????
If you don't have an answer, then how do I get back to my previous version of Firefox with my home page and bookmarks? Or do we just need to go back to Explorer or Google Chrome?

Cant get BBC Iplayer to work - ask me to download new version, I do this and it still does not work?

Cant get BBC Iplayer to work - ask me to download new version, I do this and it still does not work?

When you say [First it will not let me make my apple ID account and then whenever it does work it says cannot connect to itunes store ]
How are you creating your Apple ID?
Cannot connect to iTunes Store -> http://support.apple.com/kb/TS1368?viewlocale=en_US

Cant get my sound to work :(

I recently had to format my computer because of a virus that wouldnt let me log into windows. I was running win xp pro upgrade and it was running fine. Now i run win 98se becuase it wont let me upgrade for some wierd reason. but i cant get my sound to work. i try to install the drivers but i get a screen after the install wizard to put win98se cd in, select drive and press ok. well i clicked just about every option there was. and it would either flash back to the my documents on the selection screen or ask me if i want to cancell the installation, i have no idea what to do. I dont even know if it is recognizing that i even am using my integrated sound card. i would go and get another sound card but i dont have any money right now. anyone else have this problem or can help with with this problem??? ;(
i have the k7n2g mobo with a 1800 xp athlon

Hi,
You can tell whether the system has found your soundcard hardware by looking in "Device Manager" have you yellow question marks that show hardware (but no drivers)? My apologies if you've done this.
If I remember correctly (but don't quote me) when Windows98 asks for your 98SE disc it's looking for a file within one of the .CAB files on the 98SE (Correct me If I'm wrong) disc. If not, exactly which file is it looking for? - the requester should give you a clue. When you know what the file is, do a search on your 98 CD to see if you can find it. Then point the drivers install to that location (the directory where the .CAB OR relevant file resides.)
You say that after failing to find the file on the 98 CD that it reverts to "My Documents" this would suggest that you'd previously installed drivers (or other Win98SE software) from that location. For some reason Win 98 assumes (for some stupid reason) that it'll find any future files it needs at the same location as previously installed files.
Try installing the drivers for your sound using "Device Manager" click on the yellow question mark next to your hardware (if they are available) and Windows should open the "There is a problem with this device" (or words to that effect) requester and follow the instructions (wizard) from there.
I'm going to nip off now as I have 98 SE on a different partition (I very rarely use it). I'll have a look and get back to you later.
Good luck! :D
Axel :D

Cant get Security Mode to work on WRT54G

Similar Messages

Maybe you are looking for