Cant get sw to load /re-load -accidently hit cancel

was loading sw when I hit cancel.
Now cant get it to load again/reload.
Suggestions??

Welcome to Apple Discussions.
Uninstall iTunes and the iPod software updater in Add/Remove Programs from the Control Panel, if any, and try installing them again. Recommend to download the latest versions from the Apple site instead of using the programs from the CD.

Similar Messages

TS4022 cant get icloud control panel to load correctly to use outlook 2013

i cant get control panel to load correctly to allow me to set up sync functions to my outlook 2013 on my pc

Solved. Uninstall iCloud Control Panel from Windows 8 machine (use Control Panel). Restart, reinstall iControl 2.0.

My old PC died. I authorized my new PC. All the cloud music is now on it and plays. Tried to sync with my IPOD CLASSIC. Asked me if I want to erasesons I said yes. Now I cant get my new pc to load songs to my IPOD or burn a CD.

My old PC died, I got a new windows 7 pc. I authorized new pc, The cloud music plays. Connect IPOD CLASSIC, asked me to erase or load I hit erase. Now I cant sync any songs to my IPOD nor can I burn a CD from a play list. Help I have no clue how to load my library to my IPOD.

What happens when you try to sync your iPod Classic with your iTunes library? Any error messages? If so, what is the exact wording of these error messages?
Does the iPod appear under Devices in the left hand pane of iTunes?
B-rock

Cant get adobe flash player to load

hi i am t
rying to get adobe flash player to install but when i click on the install button it just keeps
going to the same page for me to click on the install button it wont
even start to install please is there anyone that can help me

Funny, I am running version 10.3 of flash with no problems.. Check out my youtube video:
http://www.youtube.com/watch?v=01poGmUj3xI
And those who say it can't be done, I challenge them to say otherwise..
Please see this thread for more info.
https://discussions.apple.com/message/15201301#15201301
Message was edited by: romko23

Ms6131- cant get PCI ata133 card to load bios

I have ms6131,v:1.0 , I wish to install my fast ata pci update card for
133 udma ops. but the manual says for card, set bios to scan SCSI first , but there is no SCSI order in MS BIOS Award ver.v.1.5
anyone know how to get this SII0680 raid (not using raidpart) to at least boot its own bios at startup. Test card on another system and it worked ok.
This is a BIOS option issue. read manual , bios , forum, FAQ, Usenet.
seems I am the only person messing with fast trak ata 133 drives and
interface boards. this sys.
Thanks for the help. jerry
[email protected]

The "only boot orders" in the bios settings (AWARD 1.6) are
boot device order.
like C,CDROM,A or others
tried SCSI, Something something,
I have repaired thousands of PC in my 25 years ( old guy who built
Northstar Z80 CPM systems. )
I have never seen a bios that would not scan for the upper
bank of extended BIOS pluggin's.
The C, D and E0000 bank is scanned on all IBM PC systems.
This concept was invented for the PC-JR ,by IBM.
Msi documentations is devoid of any help on ADD in cards ,even
though, it has this cute little useLESS RISER CARD.
The Classic , BOOT start order "SCSI/IDE" is pattently missing.
I tried plugging in every add in card I own into all slots that
have a bios extention code Eprom. mostly my many scsi cards.
NO sign message is displayed , showing the SCAN engine is dead
or DELETED by MSI on this box.
No answer from their email. No surprise there.
If they do answer , I will post it to USEnet so others can save the hassle of No support and No documentation ( Advanced Configuration). If I get info , it will go here and usenet.
The thing I keep going back to is Bios never mentions the RISER card.
I even tried all permutations of turning off all IDE devices and ports
and looking for boot messages from ADAPTEC, to no avial.
What I am doing:
I use these little boxs for micro servers. They run cool and use little
power for 24/7 ops. I use Linux on them.
My best unit is Dell GX-150 SFF , ver nice unit but needs smaller
PCI cards, but at least the Dell functions properly.
Anyone having a clue to this riddle , thanks 1 million times.
I suspect that there my be a very well hidden setting , I am missing.

Ihave a emac 1002 emc 1955 that igot from a auction,when i turn it on it never gets pass the loading screen and cant get into utilities

i have a emac 1002 emc 1955 that wont go pass loading screen and cant get into utilities,i got from a auction and dont want to take it apart if i dont have to so looking for a little help before it goes that far.thanks

Hi Mike, the Keyboard shouldn't matter, it should be OK in that respect.
Your kind of stuck without any Install Disc to try to repair it or reinstall, but...
Tough without the Install disc, but some things to try...
Does it boot to Single User Mode, CMD+s keys at bootup, if so try...
/sbin/fsck -fy
Repeat until it shows no errors fixed.
(Space between fsck AND -fy important).
Resolve startup issues and perform disk maintenance with Disk Utility and fsck...
http://docs.info.apple.com/article.html?artnum=106214
Tough without the Tiger Disk problems, but try fsck...
To use fsck, you must run it from the command line. Unlike using your mouse to open an application to do something, you'll need to type a text command at the prompt (#) to tell fsck what to do. The Terminal application (/Applications/Utilities) and single-user mode are two examples of command-line interfaces in which you can type such commands. To use fsck:
1. Start up your computer in single-user mode to reach the command line. Hold CMD+s keys down at bootup. Note: If necessary, perform a forced restart as described in the Emergency Troubleshooting Handbook that came with your computer. On desktop computers, you can do this by pressing the reset/interrupt button (if there is one) or holding down the power button for several seconds. On portable computers, simultaneously press the Command-Control-power keys. If your portable computer doesn't restart with this method, you may need to reset the Power Manager.
2. At the command-line prompt, type /sbin/fsck -fy
(SPACE between fsck AND -fy important)
3. Press Return. fsck will go through five "phases" and then return information about your disk's use and fragmentation. Once it finishes, it'll display this message if no issue is found: 
The volume (name_of_volume) appears to be OK  If fsck found issues and has altered, repaired, or fixed anything, it will display this message: ***** FILE SYSTEM WAS MODIFIED *****   Important: If this message appears, repeat the fsck command you typed in step 2 until fsck tells you that your volume appears to be OK (first-pass repairs may uncover additional issues, so this is a normal thing to do).
4. When fsck reports that your volume is OK, type reboot at the prompt and then press Return.
http://docs.info.apple.com/article.html?artnum=106214
Then Safe Boot, (holding Shift key down at bootup), & use Disk Utility from there to Repair Permissions, reboot once more.
Then Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
Does it boot into Open Firmware with CMD+Option+o+f ?
http://docs.info.apple.com/article.html?artnum=42642
reset-nvram (press Enter)
set-defaults (press Enter)
reset-all (press Enter)
Have you done a PRAM reset, CMD+Option+p+r...
http://docs.info.apple.com/article.html?artnum=2238

Cant get netflix to load

cant get netflix to load

I am having the same issues with watching Netflix on my Mac. It started after I downloaded the new updates for Safari. When I try to watch a movie it tells me "plug-in failed". I have downloaded every plug that I should need and it still does not work. I know it is not Netflix because it tells me that everything is fine and it works on my Wii.

HT5664 Just bought a new IMAC. Cant get the iPhoto to open even after apparently loading the library upgraded. Ideas?

Just bought a new IMAC. Cant get the iPhoto to open even after apparently loading the library upgraded. Ideas?

Did you install and RUN the iPhoto Library Upgrader on your library?
OT

TS1702 i cant get my apps to update on my iphone 4s , it keeps saying waiting then loading then it goes back to waiting ... and ive already pwr off an on

cant get my apps to update ... it keeps saying waiting then loading then waiting again ,,..ive already pwr off an on multiple times and i dont want to uninstall and reinstall because ill loose my status on my game apps

Try tapping the App, so that it changes to Paused instead of Waiting, then tap it again to resume the install.
Also, make sure you don't have any paused downloads in other apps either, like the App Store or iTunes Store.
If that doesn't do it, try resetting or restoring the iPhone.

I installed Aperture from the App Store, it was working ok, then suf=ddenly it wont load, I get the "Aperture encountered problem" message, have updated all OSX and Aperture but I still cant get it to work, any ideas ?

I installed Aperture from the App Store, it was working ok, then suf=ddenly it wont load, I get the "Aperture encountered problem" message, have updated all OSX and Aperture but I still cant get it to work, any ideas ?

I installed Aperture from the App Store, it was working ok, then suf=ddenly it wont load, I get the "Aperture encountered problem" message, have updated all OSX and Aperture but I still cant get it to work, any ideas ?

My mac keeps on loading when turning on. I cant get in with my mac. how to settle it?

My mac keeps on loading when turning on. I cant get in with my mac. Any idea how to settle it? Or should I reset my mac?

Hi..
Try Resetting the System Management Controller (SMC)

I cant get my photoshop to load completely, it always says a patch failed to load

I cant get my photoshop to load completely, it always says a patch failed to load...I unistall and try again and same error.

Hi wilsonBright,
Which OS are you using? Please specify the exact error message?
Regards,
Romit Sinha

Ive had my 4G ipod touch for about 3 years and i was waiting for one of my games to load and my ipod suddenly turned off and now i cant get it to turn back on. is there a way to fix it or is it just completely shot?

ive had my 4G ipod touch for about 3 years and today i was waiting for a game to load and my ipod suddenly shut off and i cant get it to turn back on. is there any way to fix it or is it just completely shot?

See my response to your other post

I cant sync my iphone 5s on windows itunes, keep getting error message unable to load dataclass information from sync services.

i can not sync my iphone 5s on itunes on windows. keep getting error message "unable to load dataclass information from sync services" when plugging in my phone.
I have tried uninstalling itunes and re-installing it.
Turning off firewall and antivirus.
Has anyone had this before and if so how did you over come this issue?
Thanks in advance

Hey troyboi12345,
Thanks for using Apple Support Communities.
To troubleshoot this issue, follow this article.
iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert
http://support.apple.com/kb/ts2690
Have a nice day,
Mario

How can i get the itunes store to load ????

I cant get the store to load . it starts and then bogs down and stops. i have gone to help, diagonstics and uninstalled and reinstalled...updated...AAGGGH. I have done the thing with the Itunes U and parental controls...nothing seems to help please help. Life with out new music stinks.

You can try requesting it via this page (these are user-to-user forums) : http://www.apple.com/feedback/itunes.html
But unless the the US rights-holder passes it to Apple and allows them to sell it in the US then Apple won't be able to sell it there

Cant get sw to load /re-load -accidently hit cancel

Similar Messages

Maybe you are looking for