Cant get through the ipad set up

I have a new ipad and cant get through the set up process because the ipad wont connect to my network.

If you need to, you can set up the iPad through iTunes on your computer as well. That "old fashioned" way of activating the device still works. Don't be hesitant to try it if you need to do so.
If you do not have a computer, obviously your hands are tied in that regard, but you could try using a friend's computer - or you can try activating the device in another WiFi network - at a library, a friend's house - anywhere that you can get WiFi access.
If the device is new and you have nothing from which you can restore anyway, it doesn't matter how or where you activate the device.

Similar Messages

  • HT4061 My Child has disabled my ipad mini...It ran out of charge and now is disabled for 22928370 minutes, what can I do as I cant get onto the ipad to get the serial number to speak to an advisor and its only 10 months old. HELP!

    Please help me....
    My Child has disabled my ipad mini...It ran out of charge and now is disabled for 22928370 minutes, what can I do as I cant get onto the ipad to get the serial number to speak to an advisor and its only 10 months old. HELP!

    Hello Jesslocko,
    Before following the iPad Restore process make sure you have updated version of iTunes installed on your computer, to check that Open iTunes on your computer click on Help and then check for updates ( If there is any updates available then Install it ) and If you do not have iTunes Installed or if you want to directly update the version of your iTunes then Download and Install iTunes from here : http://www.apple.com/itunes/download/
    1. Make sure your device (iPad) is unplugged (Disconnected) from your computer (this should be the computer that you use to sync your iPad or you can use any other computer with iTunes installed in it). You can leave the USB cable connected to your iPad though.
    2. Turn off your iPad. Press and hold the power button on the top edge until a slider appears. Slide it from left to right to power off your device. If the slider doesn't appear (because your iOS device has frozen up) then hold the power and Home buttons down until the iPhone or iPad turns off.
    3. Ensure your device has a decent amount of charge. Leave it plugged in to the mains for 10 minutes or so if you see the flat battery icon. (iPad low battery)
    4. Hold down the Home button (the round button at the bottom of your iPad screen) and connect the other end of USB cable to the computer this should cause your iPhone or iPad to turn on. Keep holding the Home button until you see the iTunes and USB cable images on your iPad screen, then release the button.(iPad recovery mode)
    5. In iTunes (launch the application if it isn't running on your Computer), you should see a message saying an iPad has been found in recovery mode.
    6. Click OK and then click on Restore to bring your iPad to Factory settings

  • Used ipod video converter but still cant get through the sync.

    i change the format of my vids using the ipod video converter which it successfully did it..it changed to mpeg4
    but when i tried to sync it, it stated 'there's a problem occurred'..
    what happen??

    Try highlighting the video in iTunes. Then go to "Advance" (top menu) and select "Convert to iPod. This will probably help. Then you just sync again.

  • Just bought a new mac mini, wireless keyboard, and track pad. My track pad will not synch. All advise I have been given is to change items in the setting menu, but I cant because I still have to get through the setup!!

    Just bought a new mac mini, wireless keyboard, and track pad. My track pad will not synch. All advise I have been given is to change items in the setting menu, but I cant because I still have to get through the setup!!

    The power button for the Trackpad is on the right hand end of the battery case. Press that button to initiate the pairing process. On the top of the Trackpad just above the power button is a tiny green light (you probably cannot see it unless it is lighted). That light will indicate ehther or not the Trackpad is discoverable. If the Trackpad has discoverable the green light will blink on and off. If it does not pair within 3 minutes you will have to press the power button again to re-initiate the pairing process. Once your Trackpad has paired, you can just leave it on and it will pair automatically when you reboot your Mac.
    If you are having problems pairing, try turning off any other Bluetooth devices within 30 or so feet of your Mac mini. That includes other Computers, iPhones, iPads, etc. that may be in the area. Once your Trackpad has pairedwith your mini, you don't have to be concerned about other Bluetooth devices.
    One other hint, I find that although the Wireless Trackpad does not eat batteries as fast as the Magic Mouse it still uses more than the Wireless Keyboard. It is a good idea to keep a supply of AA batteries around. I have used Apple's Rechargable batteries, but found they did not last that long before needing to be recharged. I have had the best battery life from Duracell Quantum batteries.

  • HT1212 I just got a new IPad mini and must have entered in a 4 digit password when setting up but I can't remember it.  I can't get on the IPad.  Any suggestions?

    I just got a new IPad mini and must have entered in a 4 digit passord.  I can't remember what it is, so I can't get on the IPad.  I had not connected it to Itunes yet.
    Any suggestions?

    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    You may have to do this several times.
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • HT201442 how do i get through the passcode screen to set my iphone back up

    i am trying to us my old iphone because my current one broke. my old one is disabled from trying the passcode too many times, so i am trying to get through it. the phone is not activated because i cant get through it!

    You don't.
    It is all or nothing.
    You should be syncing contact with your computer regularly, so they should be in whatever program you have chosen to sync.
    You should be importing all pics regularly, so they should be on your computer as well.

  • HT201365 activation server is down and i cant do it through itunes because my sim is locked, i cant unlock it because i cant get to the screen that lets me enter my pin

    activation server is down and i cant do it through itunes because my sim is locked, i cant unlock it because i cant get to the screen that lets me enter my pin

    That is very particularly bizarre situation that as far as I know can only be overcome by borrowing someone else's unlocked sim.

  • My ipad is disabled and I cannot restore it because the Function Find My Ipad setting was on, and I cannot get in the ipad to turn off the setting in order to restore the ipad. Does anyone know how to solve the problem

    My ipad is disabled and I cannot restore it because the Function Find My Ipad setting was on, and I cannot get in the ipad to turn off the setting in order to restore the ipad. Does anyone know how to solve the problem

    Force iPad into Recovery Mode. Follow step 1 to 5 very closely.
    http://support.apple.com/kb/HT1808
    Note: You may have to repeat the above a few times.

  • HT5312 I have forgotten the answers to my apple security questions. I have tried several times but just cant get through and I need to make a purchase for the first time

    I have forgotten the answers to my apple security questions. I have tried several times but just cant get through and I need to make a purchase for the first time

    I am having the same problem. I know my apple ID and password but do not remember my security questions. How do you go about changing the security questions? Please help.
    Thanks.

  • I can only see the welcome to mail screen (iphone 5).  I have set up mail successfully because it shows mail icon with messages.  But I cant get into the mail box!

    I can only see the welcome to mail screen (iphone 5).  I have successfully set up the mail because it shows mail icon with messages (104 messages).  But I cant get into the actual mail box to read them.  Pls help!

    The received emails should show in two locations:
    1. In the All Inboxes tab of Mail.
    2. The Inbox for each mail account,
    If your emails are not showing in these locations try quitting the mail app and then reset your iPhone.
    Go to the Home screen and double click the Home button. That will reveal the row of recently used apps at the bottom of the screen. Tap and hold on the app in question until it wiggles and displays a minus sign. Tap the minus sign to actually quit the app. Then tap anywhere on the screen above that bottom row to return the screen to normal.
    To reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.

  • Help ! i have done an IOS 5 udate and cant get past the track my iphone set up screen. i have done restored 3 times. going crazy

    Udated to ios 5 and cant get past the find my iphone screen.

    Try deleting an other icloud backup and see if it will automatically backup.

  • HT4113 my i5 screen is broken, i cant get through my passcode to back up my pictures to my computer, can someone help?

    my i5 screen is broken, i cant get through my passcode to back up my pictures to my computer, can someone help?

    Is it that you cant see the screen or you cant use the touchpanel??
    If you have synced with itunes since you set that passcode you should be able to do an itunes backup which will save the photos even without entering the passcode.

  • HT5927 im trying to update my iphone 4 and in order to complete the restore backup from itunes i need to turn off the find my iphone on the iphone but i cant get passed the restore backup stage - what should i do?

    I'm trying to update my iphone 4 and in order to compelte the restore backup from itunes i need to turn off the 'find my iphone' but i cant get passed the restore backup stage - what should i do?

    Hi beckiewinter!
    I have some information for you that may help you understand your iPhone's Activation Lock more thoroughly:
    iCloud: Find My iPhone Activation Lock in iOS 7
    http://support.apple.com/kb/HT5818
    So in order to update your iPhone, you may need to turn off Find My iPhone. This can be done through the iCloud settings, and more information on those settings can be found right here:
    iCloud - iPhone User Guide
    http://help.apple.com/iphone/7/#/iph3c79652c
    Thanks for using the Apple Support Communities. Have a good one!
    -Braden

  • TS5181 i cant get onto the radio...it says check internet connection...which is fine

    i cant get onto the radio...a note saying that i need to check the internet connection comes up.
    it will not open at the individual genres of chanels.

    1. Make sure software is up to date
    2. Make sure Messages is enabled; Settings>Messages
    3. Make sure Date and Time is correctly set; Settings>General>Date and Time>Set Automatically>On
    4. Make sure Push Notification is enabled
    5. Make sure phone number or email address is correct
    6. Hold the Sleep and Home button down (together) until you see the Apple Logo

  • HT1349 I cant get past the wire less hook up

    we just got an ipod touch and we are trying to get it set up without the wi-fi. but cant get past the wi fi set up

    Check out this link https://discussions.apple.com/message/12835691#12835691

Maybe you are looking for

  • Hundreds of roles for a J2EE application using SSO/OID

    We are starting to develope a J2EE software that will have hundreds of logical roles. These logical roles must be assignable to users and groups on OID. When prototyping this scenario, we were not able to make this work well enough. Namely, in OIDDAS

  • User exit in ME22N

    Hi,         I am looking for an user-exit in ME22N transaction. My actual requirement is when I change account assignment category ( EKPO-KNTTP), the confirmation control (EKPO-BSTAE) should be defaulted with some value say 002. I have  noticed user-

  • Can't load photos into iphoto 6

    Have many hundreds of small Sony Mavica cd-r discs that will not import into iphoto and cannot be read by Preview. Disc is read by external Qfire cdrw drive and files are displayed on desktop but each time I try to open a .jpg photo file it states:"C

  • GTK 3.x 101

    Hi, I'm trying to write my first gtk3 theme, and I can't manage to assign a different text color for .notebook tab:active. Is there a bug, or is it just me? Changing the color for .notebook tab:active GtkLabel doesn't do anything (whereas it works fo

  • IDVD seems to be missing

    On my friends powerbook there is a folder for iDVD but the application is not shown anywhere. I also did a search and nothing shows up. I also put the install sisc in to install the appliaction but it does not show on the list of applications that ca