Cant hear any audio from Sound Blaster Tactic3D Rage Wireless headset

after getting the Sound Blaster Tactic3D Rage Wireless headset i red through the booklet inside and saw that i could download software for it so i went to the address it gave me and downloaded the firmware for windows and after it was finished and i had restarted my computer the headset and USb connector would both flash nonstop. as well as this i cant hear any audio from the headset. help me if you can

Just discharge it and then charge it. Should work then, and never ever try those firmware updates they are the terrorists of these headsets

Similar Messages

  • Sound Blaster Tactic3D Rage Wireless Firmware update fail

    Hey guys,
    As the title says, I have a bit of a problem. I just bought the Tactic3d Rage Wireless headset, and decided to update the firmware as I like to have the latest drivers when I get started on new hardware. So I update the transmitter while the headset was turned off. No problem.
    Then when it came to the headset I removed the transmitter and plugged the headset directly to the computer and started the appropriate application. At the end of the upgrade it said it failed to load the system after the new drivers was installed or something similar, and now it's just there flashing blue all the time. It doesn't respond to anything, and if I try upgrading the firmware again it says it can't find the headset.
    So I'm wondering A) Did I do something wrog here? and B) How do I fix it? Is there a way to restore the factory settings of the headset somehow?
    Please help! Thank you in advance.

    Hi guys,
    In an effort to centralize similar topics within our forum threads, I am closing this thread.
    Kindly post on the centralized thread (link below) for your concerns/ solutions to this particular concern:
    soundblaster tactic3d rage
    Cheers!
    Philip-CL

  • Creative Sound Blaster Tactic3D Rage Wireless crackling sound

    Tactic3D Rage Wireless crackling sound all the time when playing any sound on the headset.
    Work OK on laptop and other PC in the home. Just not my PC lol. Motherboard: Zotac H55-ITX Wifi. CPU Intel i3.

    Pauleley,
    Welcome to the forum!
    Sounds like an "interference" issue to me. Definitely not an issue with the headset as it is working perfectly fine on another machine. The transmitter operates in the 2.4Ghz frequency spectrum so you might want to check out what other devices runs on the same spectrum near to your computer (just a thought).

  • Sound Blaster Tactic3D Rage Wireless - Driver and Firmware update, now it's frozen?????????

    Just recieved my headphones yesterday - plugged it in and charged it = works. I then decided to download the newest drivers and firmware and went straight to bed. This afternoon, suddenly no sound is detected, what so ever! The USB Power LED flashes slowly and a constant red glow is showing at my headphones.. When I try to re-pair it, the USB Power LED flashes rapidly as it should, but neither the Mic Mute button, nor the Connect Button on the headphones responds.. It feels like the headset is simply just frozen right after the new driver/firmware installation.
    I've tried everything pretty much.. Went from Wireless to USB to see if that helped, but it didnt. Tried to remove / setback the drivers, still dosn't work. Headphones is just completely frozen with no buttons working and a constant red glowing light - can't be turned off or restarted!!!
    WHAT TO DO?!?
    Cheers,
    Alexander

    My headphones just ran out of power during the day = it resetted itself. I then connected it again and re-paired it. Atm it's working perfectly fine again. I will now try to reinstall the Control Panel, not the driver though, hopefully it will work this time and wont make the headphones go into "non-responding-retarded-mode" once again :-)
    Conclusion: For me it felt like it was either the Drivers or the Firmware update, maybe both, which made my headphones "crash", or atleast not respond to any command / buttons pushed. If anyone faces the same or similar problems as me, due to installation of drivers/firmware, let your headset run out of power (if you as me, don't know how to remove the battery manually) and just reconnect it :-) Should work then.
    - Alexander

  • My nano plays but cant hear any audio tried several head sets, and aux cable in my car is there something I'm missing?

    my nano plays but cant hear any audio tried several head sets, and aux cable in my car is there something I'm missing?

    Hi skeete3,
    If you are having an issue with no audio from your iPod Nano, you may find the Accousics troubleshooting in the following article helpful:
    iPod nano (6th generation): Hardware troubleshooting
    http://support.apple.com/kb/ts3474
    Regards,
    - Brenden

  • Sound Blaster Tactic3D Wrath Wireless

    Hello,
    Seem to be having an issue with my headset, the Sound Blaster Tactic3D Wrath Wireless. I've had it wired up to charge now for that past 12 hours or so but decided to watch a movie whilst the headset was charging (Watching the movie with the Headset on giving me sound). Now the Headset has cut out and every time i press the power button, it comes back on for a few seconds then cuts out again.
    Anyone got any ideas on what the problem is?
    Regards,
    Gerard

    Hi guys,
    I've had this problem today. When i was flashing TX firmware then wifi transmitter unplugged and firmware installation was interrupted. Now wifi transmitter doesn't work. How can i fix this problem

  • I don hear any audio from my device ..its hp pavilon dv6 i7

    i don hear audio from my device and its hp pavilon dv6 i7 product no: WY913EA#ACB

    Hi,
    Try the following.
    Download the IDT Audio installer on the link below and save it to your Downloads folder.
    http://ftp.hp.com/pub/softpaq/sp50501-51000/sp50642.exe
    When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers.  Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
    When complete, shut down the notebook, unplug the AC Adapter and then remove the battery.  Hold  down the Power button for 30 seconds.  Re-insert the battery and plug in the AC Adapter.
    Tap away at the esc key as you start the notebook to launch the Start-up Menu and then select f10 to enter the bios menu.  Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter.  Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
    Let Windows fully load - it will automatically load an audio driver, but just let this complete.  Then open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation.  When this has completed, right click the speaker icon in the Taskbar and select Playback Devices.  Left click 'Speakers and Headphones' once to highlight it and then click the Set Default button - check if you now have audio.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • I cant hear any audio

    I bought my HP pavilion m6-1045dx entertainment PC two weeks ago. 
    I am currenltly trying to use my ear phones to listen to audio but it does not work. 
    I get some mush sounds. 
    Please help

    Hi,
    Try the following.
    Download the relevant IDT Audio installer from the links below and save it to your Downloads folder.
    IDT Audio Installer - Windows 7.
    IDT Audio Installer - Windows 8.
    When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers.  Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
    When complete, shut down the notebook, unplug the AC Adapter and then remove the battery.  Hold  down the Power button for 30 seconds.  Re-insert the battery and plug in the AC Adapter.
    Tap away at the esc key as you start the notebook to launch the Start-up Menu and then select f10 to enter the bios menu.  Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter.  Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
    Let Windows fully load - it will automatically load an audio driver, but just let this complete.  Then open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation.  When this has completed, right click the speaker icon in the Taskbar and select Playback Devices.  Left click 'Speakers and Headphones' once to highlight it and then click the Set Default button - check if you now have audio.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Sound Blaster Tactic3D Omega Wireless PS3 issue

    I don't know if I am the only one who is having this issue, but the headphones works fine on PS3 EXCEPT some games like God of War, Evil Within, Journey, Wolfstein, Sniper Elite 3 , what the hell !!! these games support Dolby Digital 5.1 but there is no sound on my headphones
    Does anyone here know the solution for this, I am aware that this headphones doesn't support DTS which I wasn't aware about when I first bought the headphones , or AC3 audio format when I play videos on my PS3 , But hey DTS does work on PC which I can't find explanation for this

    Hi Eyadisho,
    Check out this article on Creative's support site. Maybe you can try to select Linear PCM 2 Ch. 44.1 kHz and Linear PCM 2 Ch. 48 kHz output for audio as stated in the article.

  • Soundblaster creative tactic3D Rage wireless headset, Having problem charging

    Just bought the headset installed all the software and charged them for the 8 hours.
    Now the USB-chord (the charger) won't connect to the headset when I plug them in.
    The USB is plugged in directly to the computer but as soon as they are plugged to the headset i get this message (USB Device Not Recognized)
    I got w7 if that helps
    EDIT: It helped when i used a USB adapter directly into a power outlet but not into the computor

    Hi Guys,
    You can refer to these forum threads for similar topics:
    Article 1:
    http://forums.creative.com/showthread.php?t=700751
    Article 2:
    http://forums.creative.com/showthread.php?t=702488
    Cheers!
    Philip-CL

  • Sound Blaster Tactic 3D Wireless

    Hello forummembers,
    I have my Tactic 3D Wireless for a couple of months and i really enjoy it, but now i have a problem
    As soon as i want to charge it trough my Laptop (usb) it doesnt work anymore. I plug in the cable into the headphone and the power button stops blinking, but after +/- 3 sec it start blinking again and hear the 'empty battery' tone again. So i assume it isn't charging. Everything is plugged in corectly when this happens and i tried multiple usb ports in my laptop.
    Somebody know whats going on?
    Greetings,
    Miles

    Originally Posted by MilesvanHattem
    Hi Philip,
    Thanks for your quik reaction!
    1. Yes, i'm referring to the Tactic 3D Rage Wireless
    2. Nothing special as far as i know.
    How do i update the firmware? I am kind of a nitwit on this area
    Hi Miles,
    Have you tried charging your headset with an external USB adapter?
    For your reference, here are a few of our KB articles that you can browse through:
    - How to charge the Sound Blaster Tactic3D Rage Wireless headset
    - How to Install the Sound Blaster Tactic3D Rage Headset
    Cheers!
    Philip-CL

  • I CANT HEAR ANY SOUND FROM MY HP PAVILIION DV5

    I CANT HEAR ANY SOUND FROM MY HP PAVILIION DV5 IT STARTED WHEN I PLUGGED IN MY MP3 HEADPHONES INTO MY PAVILION DV 5 LAPTOP AND IT WAS OK I HEARD SOUND THROUGH THE HEADPHONES BUT WHEN I PLUGGED IT OUT I COULDNT HEAR SOUND ANYMORE FROM MY PC BUT IF I PUT HEADPHONES OR SPEAKERS I CAN HEAR THROUGH THEM BUT I MEAN I CANT HEAR SOUND FROM MY PC WITHOUT HEADPHONES OR SPEAKERS PLEASE HELP WINDOWS VISTA HP PV DV5 32 BIT

    See if you missed anything here:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01912228&lc=en&cc=us&dlc=en
    Reminder: Please select the "Accept as Solution" button on the post that best answers your question. Also, you may click on the white star in the "Kudos" button for any helpful post to give that person a quick thanks. These feedback tools help keep our community active, so you receive better answers faster.

  • I have iph 5 but the camera has crashed suddenly and cant hear any sounds on the phone

    I have iph 5 but the camera has crashed suddenly and cant hear any sounds on the phone

    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these in order until the issue is resolved.

  • On iMovie how can you mute a section of the sound track so you can hear the audio from the video clip?

    .

    Hey,
    If you double-click on the soundtrack you can open it up in the inspector tab and lower the soundtrack so that you can hear the audio from the video clip.
    A great resource for finding answers to questions like this is http://www.imovietutorialhelp.com
    You can ask questions just like these and they will be answered for you. If you need a tutorial video made or anything like that, you can go there as well and ask for a video to made as well. Check it out.
    If you still have questions on how to do this, they can help you for sure.
    I may receive some form of compensation, financial or otherwise, from my video or link.

  • On My iphone 4s i cant hear the audio when i plug in my headphones

    Ever since i got my iPhone 4s every time i plug my headphones into my phone and try to listen to music or a youtube video i can barely hear the sound at all even if the volume is all the way up. I don't know what to do. The same thing happened with the other i phone 4s i had before this. Can someone please tell me how to fix it.

    Hi Liz1106,
    Thanks for visiting Apple Support Communities.
    If the audio volume is very low when using a headset, make sure you've tried all the steps from this article:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    No sound through stereo headset
    Inspect the headset jack for debris and clean if necessary.
    Connect the headset and make sure the connector is pushed in all the way.
    Check the volume setting. Adjust the volume by pressing the volume up and down button on the left side of the iPhone.
    If you are trying to listen to music and cannot hear any audio, make sure that the music on iPhone is not paused. Try squeezing the headset microphone to resume playback. Additionally, from the Home screen you can choose iPod > Now Playing, then tap Play.
    Make sure the latest version of iTunes is installed on the computer that you are syncing the iPhone with (songs purchased from the iTunes Store using earlier versions of iTunes won't play).
    Try another Apple headset (some third-party headsets require an adapter to be used with original iPhone).
    Try a different song or video.
    Check to see if the iPhone alert sounds or other iPhone sound effects exhibit the same audio issues.
    Disconnect the headset from the iPhone and see if sound comes from the built-in speaker.
    If sound doesn't come from the built-in speaker either, this article can help:
    iPhone: No sound or distorted sound from speaker
    http://support.apple.com/kb/ts5180
    All the best,
    Jeremy

Maybe you are looking for

  • Minimum subset of a set, whose union is same as original set?

    hi, if you have a Set of Sets called S, e.g. {{1,2},{2,3},{3,4}} and want to find the/a minimum subset of S called S', which has the property that union(S)==union(S') eg union({{1,2},{2,3},{3,4}})==union({{1,2},{3,4}}) where union(S) means the union

  • Css styles in rendered html

    I'm trying to find where i can access the settings that determine the embedded style sheet that gets rendered with the html.I'd like to add a print style to the embedded style. Thank you Karl

  • Siebel Analytics prompt reference

    Hi All I have a report made in Siebel Analytics or Oracle Presentation Services. In the report I must show a prompt filter with few values (calculates) and some columns from a table. My problem is the filters in the Criteria doesn't use the prompt va

  • Text messages won't forward since updating to ios 8.1 on 10/20

    I updated my iphone 6 on 10/21 to the ios 8.1 and ever since I have not been able to forward texts.  I can select texts but the arrow to forward in the bottom right of the screen is gone and it doesn't do anything if I press where it used to be.

  • I could not see the video of the tutorial I've only the sound

    From a faw months now, when I want to access a tutorial, the video loaded, but after that I can only hear the voice, no image.... What shoudl I do (was not the case 9 months ago.. Any update I missed ? Thank you for your help