Cant hear audio from dvd imported footage

I transformed some footage obtained on my camera to a dvd, and im working on it, but i cant hear the audio and when i pass it to the timeline doesnt appear any audio at all, when i view my clips on viewer i can hear the audio but not when working on it. The dvd works fine and seen at dvd player its all ok, the problem is working on final cut, im new but learning quickly and this is getting me on my nerves, please give me a solution.

Handbrake http://handbrake.fr/?article=download also works well, but I personally like MPStreamclip better.
I recommend outputting to DV or 100% quality quicktime H.264 so you don't loose any video quality. DV will probably encode a bit faster than quicktime, but will also take up more space.

Similar Messages

  • Audio from dvd imported into iMovie

    I don't know alot about any of this but here goes....my daughter went skydiviing and had it video taped with sound of course. The videographer added music to the DVD of the skydive. I got it into iMovie (I want to edit and get some still shots from it) but the sound is very low. I've got the clip control up to 150%, and my computer volume control on the key board is all the way up. First question: what else can I do to help volume? Second question: Is there a way to seperate the original sound of the video from the music that was added to the DVD? The music overpowers the converstion.
    I have iMovie HD (6.0.3), Streamclip, and QuickTime MPEG2 if these would be helpful. Thank You

    +On the volume issue, if you can extract the audio from the clip, and then make several copies of the audio clip, overlaying them one on top of the other in your iMovie project, that might boost the volume.+
    Yes, but that would not separate out the music from the sound she wants to hear over the music.

  • Missing audio from DVD import

    Need abit of advise,
    Importing a VOB file from a DVD movie which is playing
    to sound allright in QT but the audio does not follow
    the movie in FCP. There appears no audio files in the
    audio folder on the DVD at all.
    Is there a special way to import vob movie files into
    FCP pretaining the audio files or it is done differently.
    Cant find anything about it.
    Many thanks any advise.

    Sorry for the delay Tom. Properties for the .mov file I created and the original MPEG file are both the same...Enabled is checked, Format is MPEG1 Muxed. I would have used whatever the defualt settings are for QTPro. Thanks for your help.

  • Cannot hear audio from internet video. Can hear DVD. Help!

    Cannot hear audio from internet video.  Can hear DVD.  I don't know what I changed in msconfig start up.

    Hi,
    The first thing I would suggest is to run through the guide by Daniel_Potyrala on the link below to completely uninstall and then reinstall the Flash Player Plug-in.
    http://h30434.www3.hp.com/t5/Notebook-Display-and-Video/The-solution-to-most-problems-with-the-Flash...
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Cant hear audio , text tone, keyboard tone without headphone but ringer is fine in iphone 4

    Cant hear audio , text tone, keyboard tone without headphone but ringer is fine in iphone 4

    Hi Nik 123,
    Welcome to the Apple Support Communities!
    I understand that it can be frustrating when the sound on your iPhone is not behaving as expected. In this situation I would recommend using the troubleshooting steps provided in the attached article. 
    If you hear no sound or distorted sound from your iPhone, iPad, or iPod touch speaker - Apple Support
    Cheers,
    Joe

  • I can play music from my ipod on my computer but now i cant hear anything from headphones

    i can play music from my ipod on my computer but now i cant hear anything from headphones

    You can also redownload it by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • Why cant hear audio on yahoo vidios on my ipad?

    Why cant hear audio on yahoo vidios on my ipad?

    Michael, thanks for this. I'm sure it will work. Until then I am stuck trying to open restrictions as my kids cant remember the code they put in! So every hour I have to try a new number. I'm sur eit is one of a certain sequence, but which one? Regards Nick

  • Cannot hear audio from external iSight

    My machine is a 2007 Mac Pro octo, 16GB RAM, OS 10.5.2. Software Update reports the system as up-to-date.
    I just got an external iSight webcam. It's recognized by System Profiler as model 0x8, revision 1.0.3. (For unknown reasons it's reported as having four sub-units and a 200MB/sec connection speed.) iSight Updater reports the unit as up-to-date.
    Its video appears in iChat's (4.0.2) video preview window, and the video's quality is acceptable. The audio meter at the bottom of the preview displays a signal that varies in response to the sound level in the iSight's environment.
    The iSight appears in System Prefs/Sound as a FireWire input. The display there varies with the environment's sound level, and is responsive to changes in the Input Volume setting on the same screen.
    The iSight shows up in Audio MIDI Setup as a fixed one-channel, 16-bit, 48kHz audio source.
    The above tells me the iSight is producing an audio signal. Nothing I've been able to do, however, has permitted me actually to hear this audio signal. Whether I select the Mac Pro's built-in output, its built-in line output, or an external FireWire audio interface, I cannot hear the iSight's audio. Using these same configurations, however, I can hear audio from QuickTime Player or any other audio app I've tried, as well as all system alerts. The problem seems to lie in the signal's routing.
    I've followed this forum's maintenance and troubleshooting guidelines, including isolating the iSight on the FireWire bus and repairing permissions from a second 10.5.2 start-up drive.
    I've spent several hours searching for clues about what might be happening, but have exhausted the suggestions I could find.
    Does anyone have any further thoughts on how I might go about capturing this camera's audio signal?
    I'd appreciate any assistance that gets me there.
    Thanks.

    Hello Hominahomina
    You sound like an experienced Mac user, and you have tried most of the things that can cause this problem. You probably have already checked to be certain that your iChat > Video > Microphone Enabled has a check (tick) mark.
    If so, the next suspect I can suggest for your consideration is a possible hardware or software conflict with your "external FireWire audio interface". Disconnect it and test iSight audio again. If it still does not work, uninstall any software that was installed with your audio interface and try again.
    If that does not help, you can use any of the suggestions from How to test your iSight to ensure it is functional that you have not already tried.
    If, when you play back the file, you can hear the sound recorded with your iSight using iMovie (4 or later), QuickTime Pro, or some other app that can record audio, your iSight itself cannot be the problem. You may have a corrupted iChat preference file. Try this:
    • quit iChat if it is running
    • delete your Home(User)/Library/Preferences/com.apple.ichat.plist file.
    A new .plist file will be created the next time you launch iChat, but deleting the .plist file deletes several iChat preference settings, so those you want to be different from the default values will need to be reset.
    If all else fails, your external iSight likely needs help form an Apple Service Technician. The external iSight you bought is likely not covered by Apple Warranty. If the seller is not providing you service guarantees or warranty, you may be want to check Apple's iSight Service: Frequently Asked Questions. If your external iSight needs parts that you or your Service Technician cannot locate, http://www.synaptech.com may be able to help you obtain those that are still available.
    BTW, your posted system info shows Mac OS X (10.4.10), but you say that you repaired permissions from "a second 10.5.2 start-up drive." Hopefully, your posted info merely needs to be updated. Although we must start from a different disk to repair a disk, I am sure you know that we repair permissions on a startup disk using its disk utility when started from that drive. For benefit of less experienced readers, don't repair permissions for a disk with one Mac OS version (like 10.4.x) when started up from a different Mac OS like 10.5.x because doing so can cause serious permissions problems.
    EZ Jim
    PowerBook 1.67 GHz w/Mac OS X (10.4.11) G5 DP 1.8 w/Mac OS X (10.5.2)  External iSight

  • Audio from DVD

    Can't find a forum that seems appropriate for this question, this one seems the best:
    I'd like to extract audio from some older DVDs that I have -- ones from the 70's. Nothing illegal or anything like that, just that I'd like to have have some of the music on my pod, they really did have some great tunes -- and you can't get them in the store, no Amazon, no iTunes store, nowhere. Even if you could, nothing quite like all the background stuff that makes it so fun to listen to.
    Anyway, I'm looking for a way to take out the audio of an old DVD (meaning a DVD of an old movie, which is different from a DVD of a new movie, which seems to be easier).
    Any suggestions?
    Thanks much.

    The only legal way is to capture the output of DVD Player using a utility such as Audio Hijack or Wiretap. Either of those utilities can save the captured audio in a format that iTunes can import.
    Hope this helps.

  • Cant hear sound from my laptop

    i cant hear sound coming from laptop. when i try to test the sound it says fail to test tone. i think i have the g4 but i know its the pavilion g series
    This question was solved.
    View Solution.

    Hi,
    Try the following.
    Download the IDT Audio installer on the link below and save it to your Downloads folder.
    http://ftp.hp.com/pub/softpaq/sp59001-59500/sp59154.exe
    When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers.  Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
    When complete, download and reinstall the Chipset driver on the following link.
    http://ftp.hp.com/pub/softpaq/sp52501-53000/sp52791.exe
    When the Chipset reinstallation has completed, shutdown the notebook, unplug the AC Adapter and then remove the battery.  Hold down the Power button for 30 seconds.  Re-insert the battery and plug in the AC Adapter.
    Tap away at the esc key as you start the notebook to launch the Start-up Menu and then select f10 to enter the bios menu.  Press f9 to load the defaults ( this is sometimes f5, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter.  Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
    Let Windows fully load - it will automatically load an audio driver, but just let this complete.  Then open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation.  When this has completed, right click the speaker icon in the Taskbar and select Playback Devices.  Left click 'Speakers and Headphones' once to highlight it and then click the Set Default button - check if you now have audio.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Cant hear audio while capturing

    Hi
    When I capture video & audio, i cant hear the audio from my source. However, the audio is captured and embedded in the clip when i look at it after the capture.
    Do i have to turn on some monitoring function of some sort maybe?
    Im capturing with an Black Magic card via SDI Embedded Audio.
    Maybe someone have a clue.
    //Lukasz

    We're here all week, try the liver.
    I've always been a believer in monitoring in the signal chain. Granted I don't work much with HDV-- but monitoring what is going into and out of the computer, rather than relying on the computer's built in audio seems to be the way to go. Then you know what's coming off the tape, and what's going back down to the tape.

  • Cant hear audio

    cant hear movies or video

    Hi Edward,
    If you cannot hear any audio there are multiple possibilities.
    Either there is no sound at all from the Speakers, and you are getting sound from external speakers or headphones.
    or you are getting no sound what so ever from any of the above devices.
    first check to see if there is any mute button on the top of the keyboard. or if the speaker button at the bottom right of the screen (system tray has a red x to it)
    If your computer has win7
    Click on pearl button, or the start button, in the search field type in troubleshooter and click on find and fix problems.
    a new window control panel will open try to click on Troubleshoot audio play back .
    click next. this should automatically fix any minor problems with audio.
    Else i would need the computer product number or the model to get the link for reinstalling the driver.
    Thanks if you find that the above steps help you to find a solution. Please click on Kudos.
    I work for HP

  • Hearing Audio from placed background movie

    I am trying to line up my audio from a FCP .mov file. When I play my movie...the video plays fine in LType but there is no audio that plays. Is there a setting Im missing? This has worked before for me where I can hear my audio adjust the graphics and all is well. Any help is appreciated!

    What you probably want to do is,
    From within FCE/FCP/FCS is
    1. place timing markers within the sequence timeline.
    2. File->Export->For LiveType and include the appropriate markers.
    From within LT is "Importing a Background Movie With Timing Markers" which is found on page 45 of the LT2.1.4 manual.
    My $1.45 worth. Hope it helps, even though it maybe a different workflow to what you had in mind.

  • Recording Audio from DVD Video

    Hi,
    I have a music concert video on DVD. I would like to record a song off the video so that I can learn to play the guitar part. Is there any software out there that will separate the audio from the video, or in other words, capture the audio and maybe convert it to mp3 format so that I can play it in iTunes without playing the video?
    Sincerely,
    Jim

    Audio Hijack will let you capture audio from any running Mac Os X application.
    http://www.rogueamoeba.com/audiohijack/
    --HangTime [WIll Compute for Food] B-|>

  • Audio from DVD to CD

    I need to pull some narration from a DVD to burn onto a CD for a client. We no longer have the original audio. I used MPEG Streamclip to open up the .VOB files, but when I use that program to export the audio I get "error: can't convert sample rate".
    The Audio PID is 128 AC3 2/0, which I realize is compressed audio, but that's about all I know. Is there a way to convert this audio in Compressor so that I can burn it onto a CD?
    Thanks in advance for any help!

    Maybe I should start a new thread, but this still relates to the subject line... I'll close it out after this last question...
    OK, now I have my audio from the DVD a Final Cut Pro sequence. I added chapter markers. Export>Using Compressor.
    In Compressor, I chose Audio AIFF 44.1:16 (cd quality). I can see my chapter markers in purple in the Compressor View Window. When I open the .aiff file in Quicktime, my chapter markers are not there. Am I missing a setting in Compressor or Quicktime?

Maybe you are looking for