Cant hear clearly!!!

I have a 2630; whenever i talk to my friends both of us cant hear others clearly, the voice is very deep , so how can i fix this problem, thanks

its may be your phones mic and earpice is not working properly contact to nearest nokia care regarded usman manii
silvi

Similar Messages

  • My iphone 3gs fell down and now it dosnt charge ,nor is the home button responding. there is a slight gap in the left side (back panel as well)..further the caller cant hear me but conversation is clear with earphones

    HI all,
    My iphone 3gs fell down and now it dosnt charge ,nor is the home button responding. there is a slight gap in the left side (back panel as well)..further the caller cant hear me but conversation is clear with earphones..plz help

    sounds like the fall caused some damage. get it replaced through apple

  • Ipod touch 5 people cant hear me when

    So I've had my ipod touch 5th generation since it came out its worked fine. I made calls and stuff on apps before in the past and skyped and it worked fine. Then one day it just stoped I tried to make a call and the other person can't hear me. I don't know what happened. I didnt drop it its not dirty. I can hear the other person find but they cant hear me. Help!!!!

    - Make sure the mic hole is clear and unobstructed. The mic hole is the hole on the back by the camera lens.
    - Open the Voice Memos app and see if you se the VU meter needle move with sound
    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar          

  • HT6154 people cant hear me on a call on my iphone 6

    people cant hear me when im on the phone. my side cuts off.

    Hello Bailey5071,
    So if people cannot hear you, then I would try out the steps in the article below to test it out to help isolate the issue with the microphone on your iPhone. You may also want to try with a headset or on speaker phone as well. 
    If your voice is too faint or sounds unclear using iPhone, or iPod touch
    http://support.apple.com/kb/ts5183
    Follow these steps, testing after each with Voice Memos.
    Unplug anything plugged into the headset jack.
    If you're on a call and holding your phone next to your ear, speak into the microphone and make sure you don't block it with your fingers or shoulder.
    If you're using a screen protector or case that covers the microphone, remove it. Clear any debris from the microphones.
    Restart your device.
    Update to the latest version of iOS.
    If you've tried these steps and people still can't hear you well on calls, contact Apple Support.
    Regards,
    -Norm G. 

  • Cant hear from rear speak

    I have installed my new Audigy 2 ZS hardware and software in concordance with my logitech z-5300e 5. surround sound speakers. For some reason, i cant hear from the rear speakers.. but not like nothing. I go into the EAX console and i play the song from there and i can hear music out of the back speakers for sure, but then i load counterstrike and do the surround sound test and i hear nothing from the speakers, i load musicmatch and i can hear from the rear speakers. THe reason i bought the surround sound was for FPS game improvement... can anyone help me out, why is it not playing when i want it to?

    Under games, it doesn't matter. As long as your game supports DirectSound3D or OpenAL, it will support any number of speakers, according to your soundcards configuration.
    To test functionality under DirectSound3D, I suggest using Rightmark 3DSound test
    The positiong is very clear as long as you select Hardware Acceleration. Also some games need you to select output configuration, although this is against Microsoft's suggestions.
    Message Edited by alexs3d2 on 09-2-2005 07:7 AM

  • When i plug my headphones into my ipod touch 5 i cant hear any music i tried 2 different headphones what should i do

    when i plug my headphones into my IPOD touch 5 i cant hear any music i tried 2 different headphones what should i do

    Hey Ehlam Managua, You have tried a different set of headphones, still no joy-- OK. (1st step in trouble shooting completed). Just to be clear the sound still works through the speaker, correct? If so, try quickly plugging / unplugging the headphone jack about 12 times, there is a tiny switch inside the port that may be stuck closed. If so the plugging / unplugging should free it up. If still no joy, have you tried turning your iPod off then turn it back on? If that doesn't work go into Setting>General>Reset then tap Reset All Settings. If still no joy, connect with your computer, make a full set of backups from this iPod to your computer, then Restore to Backup. If still won't work, Restore to New. If still nothing, could be dealing with a hardware issue. Contact your Apple store and set up an appointment to have your iPod evaluated.

  • Why on firefox browser on videos i cant hear sound it just playing and just gone.

    Why on firefox browser on videos i cant hear sound it just playing and just gone. The sound dissapearing on all videos. Please help me i tried some solutions but it not fixed. Thank you.

    Did you check the volume setting in that Flash Player?
    Try to clear the Flash local storage and settings.
    *Windows Control Panel > Flash Player > Storage: Local Storage Settings
    **Remove a specific domain: Local Storage Settings by site
    **Remove all domains: Delete All and Delete Data
    Flash Website Storage Settings panel:
    *http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager07.html
    Global Storage Settings Panel:
    *http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager03.html
    You can click the Volume icon on the Windows Taskbar near the clock and click the Mixer link at the bottom to open the mixer.<br />
    You can adjust the volume level for each application in that window, so make sure that Firefox is not muted or set at a low level.<br />
    Current Firefox versions use the plugin-container process to run plugins, so you need to check the volume setting for the plugin-container process.<br />
    You will only see the Firefox program or the Plugin Container in the Mixer if you are on a website that plays sound.

  • I cant hear my video recording voice in iphone 5

    i record the video but cant hear my voice after all audio recording is clear and good

    Hi Salmanxrg,
    So all other audio recording are okay except video recordings.
    Note there are 3 micrphones on the iPhone 5.  Make sure they are all clear.
    iPhone: Microphone issues
    2 .Make sure nothing is blocking any of the microphones (refer to the pictures below to find your device's microphones). Check for these:
    Dirt or debris
    A screen protector or case
    If that isn't it, please check out the rest of the article.
    Take care,
    Nubz

  • Hi when i playback videos on my phone, i cant hear the sound ....also when i call someone or when i get a call i cant put it on speaker mode because i can hear them but they cant hear me

    hi when i playback videos on my phone, i cant hear the sound ....also when i call someone or when i get a call i cant put it on speaker mode because i can hear them but they cant hear me

    Basic troubleshooting steps clearly outlined in the User Guide are restart, reset, restore from backup, restore as new device.
    If you have been through ALL of the troubleshooting steps and you're still having problems, then you'll need to bring your phone to Apple for investigation.

  • Recently got a iphone5s  can hear someone call me but they cant hear me

    Hello i recently got a new phone iphone5s and i can hear someone call me perfectly fine but they cant hear me and also the phone wont recognize the headphones. it would treat it like the headphones arnt in and also i tried to make a video and cant hear myself speak

    Hello Sylviaxox,
    It seems you are experiencing an issue with the microphone of your iPhone. That does sound troublesome. The following article provides troubleshooting guidance which may help you find a solution:
    If your voice is too faint or sounds unclear using iPhone, or iPod touch - Apple Support
    Fix common issues
    Follow these steps, testing after each with Voice Memos.
    Unplug anything plugged into the headset jack.
    If you're on a call and holding your phone next to your ear, speak into the microphone and make sure you don't block it with your fingers or shoulder.
    If you're using a screen protector or case that covers the microphone, remove it. Clear any debris from the microphones.
    Restart your device.
    Update to the latest version of iOS.
    If you've tried these steps and people still can't hear you well on calls, contact Apple Support.
    Thank you for contributing to Apple Support Communities.
    Cheers,
    Bobby_D

  • Pantech Jet II, I cant hear any one and they cant hear me but the call rings.

    after hiking, I now cannot  hear any one and they cant hear me but they can ring my phone and I pick up and nothing and they cant hear me either. what Happened  ?  I did a Factory Reset and still the same problem.    I can txt message in and out just fine.

    So what have you done to troubleshoot?  Have you searched this forum for similar problems?  Have you taken the basic troubleshooting steps clearly outlined in the User Guide?  Have you looked to the right in the "More Like This" box?
    What exactly HAVE you done?

  • I have a iphone4 i updated it today to 5.1.1 and now i cant hear out of the earpiece

    i cant hear anything from the earpiece after i updated to 5.1.1

    Basic troubleshooting steps clearly outlined in the User Guide are restart, reset, restore from backup, restore as new device.
    If you've been through ALL of these steps and you still have problems, then you'll need to bring your phone into Apple for evaluation.

  • On my iPhone 4, people cant hear me when I make and / or receive normal (GSM) phone calls. But when on calls using internet based / native apps like viber or skype, people can hear me just fine. Voice memos work too and have already tried different SIMs

    On my iPhone 4, people cant hear me when I make and / or receive normal (GSM) phone calls. But when I make/receive calls using internet-based / native apps like viber or skype, people can hear me just fine. I have tried recording my voice using voice memos - this works. And have already tried different SIM cards but the problem persists.
    I have taken my phone to an authorized Apple service center, where they restored my phone to factory settings, but still facing the same issue. They service center directed me to Apple Customer Care Hotline, where I have now spent 3+ hours explaining my issue and yet no one can resolve it. The easy answer if to replace the phone - and since it is out of warranty, I am expected to pay for it.
    Additionally, the customer service has been so rude and confrontational that it has completely changed my view of Apple and its customer focus. I am a disappointed and angry customer today - people would be surprised to hear just how rude customer service was including making statements such as "Apple doesnt make infallible products, that's why warranty is needed for our products" and that "every product undergoes a problem at some stage, so do ours!" There goes whatever confidence I had...
    My concern is simple - if no one at Apple and / or its CS hotline is able to address my issue comprhensively and keep telling me that they have never encountered a precedent before, then with what right can they expect me to pay for a replacement?! I am NOT here to fund Apple's research into their product faults and manufacturing.
    And even though a customer is out of warranty, is it too much to expect an Apple product to work well for at least a 'reasonable' period of time. My phone is less than 18 months old and has been facing this issue for the past 2 months - surely the longevity of Apple products is more than 18 months!
    Just a sad sad day for an Apple customer, compounded by unjustifiably rude and aggressive staff. And still no resolution to my problem.

    I am having the same issue - with my last 2 iPhone 4's. My first handset each time I was on a call wether it was up to my ear or on loud speaker, the call would automatically mute even though the mute button wouldn't show up as highlighted. Pressing the mute button on and off during the call doesn't fix it either. I rang Apple and asked what some of their trouble shooting solutions were. I got told that it might be a software issue and to install the latest software update. This failed. I then got told to uninstall the software on the phone and do a complete restore. This also failed. After trying the troubleshooting suggestions, I took the phone into my provider and they sent me out a new phone within a week under warranty claiming it was a hardware issue and probably just a "glitch" with that particular phone. This was not the case....
    After receiving my second iPhone 4, I was hopeful that it would work. For the first couple of days, making/receiving calls was not an issue. Until after about a week, the same problem started again. In one instance I had to hang up and call back 4 times and the call would still automatically mute after about 5 seconds. Also on the second handset, the main camera located on the back of the phone has red and blue lines running through it and can't take a decent picture. So back to the store I go to get another replacement - Again.
    For a phone that is rated highly and as a keen Apple product purchaser, I am a bit disappointed with the experience I have had with the iPhone 4. Let's hope they find a fix sometime soon because this is becoming a bit beyond a joke.....!!

  • Error while trying to synchronize Audio and MIDI. plz help i cant hear anything

    plz help me i cant hear nothing and its says: Error while trying to synchronize Audio and MIDI.
    Sample Rate 38536 recognized.
    Check conflict between Logic Pro X and external device. ????????   PLZ HELP

    It means you are overtaxing the CPU, likely with just one (3rd party-)software instrument plugin. Ignore the word "external", in this context it often means "3rd party plugin".
    So what synth is it? Since you're Dutch, it's probably one of the trancy dancy synths, such as Albino, Diva, Sylenth or Massive... I could be wrong though...
    The best way to avoid this message is to Freeze the track with the guilty synner - however, a frozen track cannot be edited, so if that is a problem, you will have to make the synth itself run lighter, which can be achieved by turning of internal effects that are ON the synth itself, especially reverb.
    http://help.apple.com/logicpro/mac/10/#lgcpf1cbfd51

  • Hi! My phone speaker is not working, so I cant hear people when they call me. I bought my iphone 4s on February 2013 at the Grand Central Apple Store. I would like to know if I can take it to an Apple Store in Spain so they can fix it or change it. Thanks

    Hi! My phone speaker is not working, so I cant hear people when they call me. I bought my iphone 4s con February 2013 in the Grand Central (NYC - USA) Apple Store. I would like to know if I can take it to an Apple Store in Spain so they can fix it or change it. Or I need to find a way to take it to the US, where I bought it.
    Thanks!!!

    You will need to return the phone to the US. iPhone warranty is only good in the country of purchase, with the exception of the EU.

Maybe you are looking for

  • Form Master-Details

    Hi , I have Master-Details form and it have 2 tabs Rawda & option , Rawda tab have 1 block and option tab have 4 blocks and when i click query button in option tab for any block it is display the result but when i try navigate the reslut by keyboard

  • Message for Dirk Herzog . Routine Help

    Hello, I saw in Eugenes blog a routine you have provided for removing invalid/HEX characters during loads .When i try to use that routine in my transformations in BI 7.0 i get an error message .This is my code, followed by the error on the bottom. DA

  • Update records in adressbook in J2ME(NEW TO J2ME)

    Hi all, I am trying to update the records in an address book in J2ME, but I can't do it, since there is no UpdateRecord( ) How can I do it?

  • Smartform output to screen

    Hi friends, I am running packing list smartform for output type PL00 and it is generating output in spool. I want to display the output in the screen instead of spool. Can somebody help please. Regards, Chinna

  • " � Kit contains a" Why do I get odd characters on web pages?

    I've noticed that different web pages display non-alpha characters. The above example was on Amanzon; other pages on discovery channel pages.