Cant hear monitor when using usb mic

hey all, question. when my usb mic is plugged in and armed for recording, i cant hear the previous track to keep my timing. the built in mic isnt that great so i like to use my external. its like when its plugged in it overrides all monitor functions. i just wanna be able to record a track while the previous one plays back. thanks guys for the help with an obvious newby.

Make sure you have the correct output selected in GB Prefs>Audio/MIDI. I assume you're using your computer speakers? If so select Built-In Output. Also make sure the recorded Track isn't muted and that the volume is up.

Similar Messages

They cant hear me when using facetime on my ipad

Snce upgrading to ios 6 when using facetime or skype i can see/ hear but at he other end they only hear static. I have seen i am not the only one with this prblem?
Has anyone a solution that works?
Thank you
Juan

I saw one post where the user said dust got in the small mic hole. Used a vacuum cleaner to remove dust and audio now works.
 Cheers, Tom

On my iPhone 4, people cant hear me when I make and / or receive normal (GSM) phone calls. But when on calls using internet based / native apps like viber or skype, people can hear me just fine. Voice memos work too and have already tried different SIMs

On my iPhone 4, people cant hear me when I make and / or receive normal (GSM) phone calls. But when I make/receive calls using internet-based / native apps like viber or skype, people can hear me just fine. I have tried recording my voice using voice memos - this works. And have already tried different SIM cards but the problem persists.
I have taken my phone to an authorized Apple service center, where they restored my phone to factory settings, but still facing the same issue. They service center directed me to Apple Customer Care Hotline, where I have now spent 3+ hours explaining my issue and yet no one can resolve it. The easy answer if to replace the phone - and since it is out of warranty, I am expected to pay for it.
Additionally, the customer service has been so rude and confrontational that it has completely changed my view of Apple and its customer focus. I am a disappointed and angry customer today - people would be surprised to hear just how rude customer service was including making statements such as "Apple doesnt make infallible products, that's why warranty is needed for our products" and that "every product undergoes a problem at some stage, so do ours!" There goes whatever confidence I had...
My concern is simple - if no one at Apple and / or its CS hotline is able to address my issue comprhensively and keep telling me that they have never encountered a precedent before, then with what right can they expect me to pay for a replacement?! I am NOT here to fund Apple's research into their product faults and manufacturing.
And even though a customer is out of warranty, is it too much to expect an Apple product to work well for at least a 'reasonable' period of time. My phone is less than 18 months old and has been facing this issue for the past 2 months - surely the longevity of Apple products is more than 18 months!
Just a sad sad day for an Apple customer, compounded by unjustifiably rude and aggressive staff. And still no resolution to my problem.

I am having the same issue - with my last 2 iPhone 4's. My first handset each time I was on a call wether it was up to my ear or on loud speaker, the call would automatically mute even though the mute button wouldn't show up as highlighted. Pressing the mute button on and off during the call doesn't fix it either. I rang Apple and asked what some of their trouble shooting solutions were. I got told that it might be a software issue and to install the latest software update. This failed. I then got told to uninstall the software on the phone and do a complete restore. This also failed. After trying the troubleshooting suggestions, I took the phone into my provider and they sent me out a new phone within a week under warranty claiming it was a hardware issue and probably just a "glitch" with that particular phone. This was not the case....
After receiving my second iPhone 4, I was hopeful that it would work. For the first couple of days, making/receiving calls was not an issue. Until after about a week, the same problem started again. In one instance I had to hang up and call back 4 times and the call would still automatically mute after about 5 seconds. Also on the second handset, the main camera located on the back of the phone has red and blue lines running through it and can't take a decent picture. So back to the store I go to get another replacement - Again.
For a phone that is rated highly and as a keen Apple product purchaser, I am a bit disappointed with the experience I have had with the iPhone 4. Let's hope they find a fix sometime soon because this is becoming a bit beyond a joke.....!!

TS1008 when the usb mic (Blue) is connected I can't hear the track play

when the usb mic (Blue) is connected I can't hear the track play. Track plays fine when mic not installed...hoping this is a typical set-up issue easily resolved.

Did you choose the the output in Garageband > Preferences > Audio midi?

Using usb mic with logic output stops

using usb mic with logic output stops

Aggregate devices are setup in the Audio/Midi setup of OSX Utilities, (Not in Logic). It gives you a way of having for than one audio i/o device. Once you have set up your aggregated devices in Audio/Midi, when you start Logic you will need to go into Audio preferences and choose the Aggregate device.

TS2771 how can i get my speaker to my iPod touch 5th generation to work i cant hear with without using the ear phone's

How can I get my speaker fixed I cant hear only when I use my ear phones

- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
Try the following to rule out a software problem
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
Apple Retail Store - Genius Bar
If not under warranty or the iPod has been abused, Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price

People cant hear me when they ring me or i ring them but when i put them on loudspeaker they can hear me :/ Help?!

People cant hear me when they ring me or i ring them but when i put them on loudspeaker they can hear me :/ Help?!

Still sounds like the mic to me. There are 2 on an iPhone 4 one on the top of the phone one under, each has a separate task. Sounds to me like your top mic is on the blink.

TS5196 others cant hear me when they call me or I call them unless i have speaker on

others cant hear me when they call me or I call them unless i have speaker on

Hello bhubbard5,
Thank you for the details of the issue you are experiencing with your iPhone 4s. The article below addresses the following symptoms:
Symptoms
Other people can't hear you, or have difficulty hearing you during a phone call or FaceTime call
Other people complain that you sound unclear during a phone call or FaceTime call
You hear no sound or the sound is unclear when playing back recorded audio
iPhone: Microphone issues
http://support.apple.com/kb/ts5183
Thank you for using Apple Support Communities.
Best,
Sheila M.

Cant Hear inless I use speaker phone

I have the old model 4g and it just started today, I cant hear inless I use speaker phone, Ringtone works but music will not play. Also when I put my ear to phone the backround does not disappear.

Thanks for trying those steps already, sbond0128. It appears there may just be damage to the internal speaker.
Since we don't repair phones, do you have insurance to file a claim to get a replacement? http://bit.ly/07CrqPK
TamaraH_VZW
Follow us on Twitter @VZWSupport

Hi! My phone speaker is not working, so I cant hear people when they call me. I bought my iphone 4s on February 2013 at the Grand Central Apple Store. I would like to know if I can take it to an Apple Store in Spain so they can fix it or change it. Thanks

Hi! My phone speaker is not working, so I cant hear people when they call me. I bought my iphone 4s con February 2013 in the Grand Central (NYC - USA) Apple Store. I would like to know if I can take it to an Apple Store in Spain so they can fix it or change it. Or I need to find a way to take it to the US, where I bought it.
Thanks!!!

You will need to return the phone to the US. iPhone warranty is only good in the country of purchase, with the exception of the EU.

No sound when AT2020 USB mic is connected.

Followed set up instructions I can see logic pro x recognizes the mic but I get no sound. I will only get sound from my USB keyboard when the USB mic is disconnected.

Did you select the USB audio in the audio menu ? Have you created an audio track on the arrage page and selected the proper input source (AT2020 USB) and lastly did you record enable the audio track or the (I) at the bottom of the channel strip to audition the incoming audio signal?

When talking to people they cant hear me when i am in speaker mode

when talking to people they cant hear me when i am in speaker mode. also when i take a video there is no sound. anybody know what the problem is?

Have a look here
TROUBLESHOOTING iPhone Hardware
http://support.apple.com/kb/TS2802
http://support.apple.com/kb/TS1630
If no joy... take it in to your local Apple Store and get it checked...
Be sure to make an appointment first.

Why my friends cant hear me when I call them with Tango or oovoo i have been tried everything

Why my friends cant hear me when I call them with Tango or oovoo?

I Have been tried everything.

Format and Partition Task Sequence Not Working As Exprected When Using USB Media

Task looks like this.
Had been working on PXE based task sequence, but when I use USB media, it only makes a single partition that is around the size of the USB thumb drive.
How does this need to be changed so that it makes a C drive partition that is 80% of the total local disk space and a D drive that uses the remaining disk space when using USB boot media?

If you choose to create a "custom" partition configuration like the one above, then you are responsible for creating any extra required partitions like a BitLocker boot partition.
Additionally, if you are deploying on a uEFI machine, then you will also need to create the correct uEFI partitions.
Generally I discourage creating extra partitions.
Keith Garner - Principal Consultant [owner] -
http://DeploymentLive.com

Does Mackie Control work with Final Cut 7 when using USB MIDI?

I have a Mackie Control Universal Pro connected via USB to my mac and it works GREAT with Logic and all the complimentary Logic Studio software.
The problem I am having is, when I try to use it with Final Cut, it wont work at all. I have read the post concerning this that was answered by Andy Mees but, I dont use a true MIDI connection, only USB.
Any thoughts?

Does Mackie Control work with Final Cut 7 when using USB MIDI?
No one will know until FCP 7 is released.
-DH

Cant hear monitor when using usb mic

Similar Messages

Maybe you are looking for