Cant hear my guitar playing

Hello
I have my electric guitar plugged via a M Audio Firewire Solo Audio Interface.
When I add a guitar track in GB, I cant hear what I am playing. I can see the volume recording bars move when I strum, but I cant get any output. I have monitoring On, all volumes are up, but no audio
Atrangely enough when I use Logic, I can hear fine.
What up with Garageband?
J

http://www.bulletsandbones.com/GB/GBFAQ.html#usecomputersspeakers
(Let the page FULLY load. The link to your answer is at the top of your screen)

Similar Messages

  • Cant Hear My Guitar

    Hello I recorded a rythm guitar track and I can hear it but when I press the PLAY button in multitrack it mutes my windows play control line in input lol. So I cant hear myself playing to practice the solo for the solo guitar track before recording and its getting very very annoying. Someone knows how to fix that in AA3 options? Thanks in advance.

    It's not really possible to answer this one with the information  you've provided (hence the lack of replies so far) but I can try to give you some general guidelines.
    For the most part, the routing of signals in and out of Audition isn't handled by AA itself but, rather, by Windows and/or the software that was installed in Windows by your sound card.
    The basic thing you need to do is set this software (often the "Windows Mixer") so that, on the playback side, you're listening to something called "Wave Out" or "Stereo Mix" or similar.  On the recording side, you will want this selected to "Line In" or "Mic In" or similar.
    However, this is where it gets complicated because there are a lot of variations in exactly how to do this, based both on your version of Windows and the make/model of sound card installed in your PC.  Complicating this further are things like the rather convoluted audio setup in the most recent versions of Windows (Vista and Windows 7) and also the fact that some basic on-board sound cards are so basic that they don't support the kind of things you wish to do.  You MAY find you need to invest in a relatively inexpensive USB2 external card.
    There are also a couple of things within Audition to check.  Under the Edit menu, click on "Audio Hardware setup" and make sure that the sound card you wish to use is selected as the default output.  On the same menu there's also a drop down menu to select the software driver you wish to use--this will likely be correct but if you find more than one option you'll lose nothing by trying another one (so long as you put it back as it was if that doesn't help).
    Sorry to be so vague but, as you can hopefully see, giving a specific answer will depend on having details of the Windows version and sound card you are using plus details of how you're trying to route your audio at present.
    Bob

  • Cant hear track plugins in play or record?

    I am running Logic pro 9.
    I can select plugins for tracks OK.
    When I select play or record I cant hear the plugins?

    O...kay...
    Are you talking about instruments on an instrument track (e.g. EXS24), and when you play or record via your MIDI keyboard you are not hearing anything?
    Or are you talking about effect plugins on an audio track and you're not hearing the processing?
    Are you getting any sound out of Logic at all?
    Need a bit more info here...

  • I can play music from my ipod on my computer but now i cant hear anything from headphones

    i can play music from my ipod on my computer but now i cant hear anything from headphones

    You can also redownload it by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • Why on firefox browser on videos i cant hear sound it just playing and just gone.

    Why on firefox browser on videos i cant hear sound it just playing and just gone. The sound dissapearing on all videos. Please help me i tried some solutions but it not fixed. Thank you.

    Did you check the volume setting in that Flash Player?
    Try to clear the Flash local storage and settings.
    *Windows Control Panel > Flash Player > Storage: Local Storage Settings
    **Remove a specific domain: Local Storage Settings by site
    **Remove all domains: Delete All and Delete Data
    Flash Website Storage Settings panel:
    *http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager07.html
    Global Storage Settings Panel:
    *http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager03.html
    You can click the Volume icon on the Windows Taskbar near the clock and click the Mixer link at the bottom to open the mixer.<br />
    You can adjust the volume level for each application in that window, so make sure that Firefox is not muted or set at a low level.<br />
    Current Firefox versions use the plugin-container process to run plugins, so you need to check the volume setting for the plugin-container process.<br />
    You will only see the Firefox program or the Plugin Container in the Mixer if you are on a website that plays sound.

  • My nano plays but cant hear any audio tried several head sets, and aux cable in my car is there something I'm missing?

    my nano plays but cant hear any audio tried several head sets, and aux cable in my car is there something I'm missing?

    Hi skeete3,
    If you are having an issue with no audio from your iPod Nano, you may find the Accousics troubleshooting in the following article helpful:
    iPod nano (6th generation): Hardware troubleshooting
    http://support.apple.com/kb/ts3474
    Regards,
    - Brenden

  • Recording a class of 30 kids singing to a guitar track I laid down on Garage Band. Severe distortion because they have to hear the guitar track through a set of speakers..

    I had a big setback today on a project I've been working on.  I recently made my first recording of my own playing and singing, a guitar track and a vocal track of a children's song.  When I recorded the guitar track, it took me a whole day to get it right.  I used the metronome through earbuds.  Then I listened to the guitar track and sang into a Snowball mike to get the vocal track down.  Played separately or together, they came out crisp, clear, no dostortion.  I made a CD of the song by sending the song to iTuines, with and without my voice so the children could practice to it.  I taught the song to 30 fifth graders so I could add a vocal track of them singing.  My plan is to use it as the music for a slideshow I'm making for their elementary graduation.  I'm a mom, not their teacher.  The teachers of the two classrooms have been generous in letting me teach the kids the song, and setting up 45 minutes for me to record it.  Did the recording of the kids today at the school.  Two tracks of all 30 kids doing their very best to cooperate.  They sang well.  I opened the garage Band file at home and it is such poor quality audio that it is UNUSABLE.  There's a lot of fuzz and distortion.  I can probably get their teachers to let me have them again to give it another try, but I better get it right. When I recorded my own voice to the guitar track, I monitored using earbuds.  I can't hook 30 kids up to my Macbook with earbuds. I played the guitar track from speakers and held the microphone out toward them, so the mike was between the speakers and the kids. The speakers and mike both faced the kids.  They sang really well, so it was pretty disappointing to find the recording sounded so bad.  My guitar teacher tried to help me figure out what to do, but he thinks it is going to be very tricky to get it right since the kids have to hear the guitar track to sing it.  I'm considering playing the CD I made of the guitar track from a boom box behind the kids and just recording the kids on a separate project file and losing the ability to edit, and probably losing most of the guitar quality and volume.  But I won't know if it works until I have 30 kids and 2 teachers and all my gear set up to actually try it.  Whatever I do, it has to work on my next try.  There's very little time left and no budget.  I thought my Macbook Pro and the Snowball, purchased at the Apple Store, would be enough.
    Please advise.  Thanks.

    Very difficult recording situation. I would probably just record the kids with you playing live guitar.
    You could do the boombox with the kids and set it up so the kids hear the guitar but try to get as little as possible of the prerecord guitar on the the track. Then either mix the kids recording with the original guitar track or add a guitar track to the kids track later.
    When you do the recording of the kids bring headphones to monitor levels. Also make sure you're happy with the track before you leave the school.

  • Theres very little sound coming from my speaker and people cant hear me i phone 4

    theres very little sound coming from my speaker when i play music and ringtone it was working fine last night also when its going straight to voicemail when people ring but then coming through as a missed call, then when i recive calls i can hear people bnut they cant hear me is anyone else having this problem with there iphone 4

    Hello adam-hardwick1993,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    Best of luck,
    Mario

  • I can hear sounds from my laptop but cant hear using headphone

    i am having hp pavillion g 6-1220se,serial no:5cd146766w,Product no-a8s15ea#abv.the problem is i can hear sound for  some application like skype through my headphone,but cant hear any sound while playing movies .but my system speakers are working fine.please resolve this as early as possible,as i bought this hp only nearly one month ago

    Hi,
    Please enable Speakers in Playback devices as follows:
    1. Right click speaker icon (right hand corner)
    2. Select Playback devices
    3. Right click Speakers
    4. Enable it
    5. Click Apply/Ok
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Cant hear from rear speak

    I have installed my new Audigy 2 ZS hardware and software in concordance with my logitech z-5300e 5. surround sound speakers. For some reason, i cant hear from the rear speakers.. but not like nothing. I go into the EAX console and i play the song from there and i can hear music out of the back speakers for sure, but then i load counterstrike and do the surround sound test and i hear nothing from the speakers, i load musicmatch and i can hear from the rear speakers. THe reason i bought the surround sound was for FPS game improvement... can anyone help me out, why is it not playing when i want it to?

    Under games, it doesn't matter. As long as your game supports DirectSound3D or OpenAL, it will support any number of speakers, according to your soundcards configuration.
    To test functionality under DirectSound3D, I suggest using Rightmark 3DSound test
    The positiong is very clear as long as you select Hardware Acceleration. Also some games need you to select output configuration, although this is against Microsoft's suggestions.
    Message Edited by alexs3d2 on 09-2-2005 07:7 AM

  • Cant hear monitor when using usb mic

    hey all, question. when my usb mic is plugged in and armed for recording, i cant hear the previous track to keep my timing. the built in mic isnt that great so i like to use my external. its like when its plugged in it overrides all monitor functions. i just wanna be able to record a track while the previous one plays back. thanks guys for the help with an obvious newby.

    Make sure you have the correct output selected in GB Prefs>Audio/MIDI. I assume you're using your computer speakers? If so select Built-In Output. Also make sure the recorded Track isn't muted and that the volume is up.

  • Cant hear audio when I scrub

    How to hear audio when I scrub in project library. Cant hear any sound when I scrub. I do when it plays back  I move9

    Scrubbing or 'skimming' as Apple calls it is controlled by a button on the Toolbar in iMovie:
    The button on the left hand side is an audio waveform with a red-line drawn through it. This indicates skimming is turned off. To turn it on you just click it and the skimming feature will return.

  • Cant hear music in store

    I can buy, after play the songs but I cant hear that 30 sec tests in store...
    What should I do ?

    Hi pals,
    We understand that you are having issues with your Nokia Music app and you are all receiving the error message: problem registering your phone for unlimited download subscription please contact nokia support', right?
    Have you tried to check these Forum threads about the same issue?
    http://discussions.nokia.com/t5/MixRadio/phone-registration-problem-for-unlimited-downloads/td-p/226...
    http://discussions.nokia.com/t5/MixRadio/activation-problem-after-upgrade-to-Nokia-MixRadio/td-p/225...
    Let us know the outcome.

  • I have videos on my ipod but cant hear them...help please

    I have an iPod video (30GB) and i tried to put videos on it but it didnt work until apple brought out an update on iTunes to convert the videos for you which i used and converted the videos and there on my iPod and i can watch them but i cant hear anything when i play them!! I can hear my normal music fine and i can see the videos but i cant hear them!! Please help!!
      Windows XP Pro  
      Windows XP Pro  

    Quicktime, Quicktime Pro and iTunes don't convert "muxed" (multiplexed where the audio and video are stored on the same track) video files properly. It only plays the video and not the audio.
    See:iPod plays video but not audio.
    You need a 3rd party converter to convert the file with both audio and video.
    Search this forum for recommendations, but beware of spammers trying to sell you their own product.

  • I see the video on my ipod, but i cant hear anything... HELP!!

    SO I CONVERTED A VIDEO FILE FOR MY IPOD WITH ITUNES, I PLAY IT ON MY IPOD BUT I CANT HEAR A **** THING, AND THE VOLUME IS UP FULL BLAST... WHAT DO I NEED TO DO?

    To use Videora iPod Convertor to convert movies for use on your iPod, consult these helpful links:
    To get started: http://www.videora.com/en-us/Converter/iPod/
    If you have questions: http://www.videora.com/en-us/Converter/guides.html
    If you have more questions, post them here: http://www.pspvideo9.com/forums/index.php?c=8
    Note that Videora iPod Convertor is a 3rd party program. If you need help with it, post your question there.
    GFF

Maybe you are looking for

  • How can I view just music - not videos - in the libary and playlists?

    I've noticed that when creating smart playlists and viewing the libarary I cannot filter out videos... is there a way to do this without having to just uncheck the videos and pretend they aren't there or is this something that apple didn't think of?

  • Can I install Airdrop on my 24" Imac 2.66 ghz?

    Aloha- I bought my Imac right when the new 21" and 27" models came out from the apple refurbished page so I know this was the last 24" model to ever come out even though it wasn't the most powerful. Can it install airdrop when I get Lion? Mahalo for

  • Non English BW Upgrade

    Hi Gurus, Please share your experiences on - When I am upgrading Non-English BW system ( from 3.x to3.5) what is special care if any should be taken or how is it different from normal BW (English) upgrade? thanks Vikash

  • Can i limit the bandwidth used in the oracle database

    hi guys my database is centralized on linux 4 OS and we have above than 400 client connect to it, and the network bandwidth size is compatible but every day from 1:00 PM to 3:00 PM the network become slowdown because there are consuming the network b

  • FM SO_NEW_DOCUMENT_ATT_SEND_API1 problem

    Hi experts,         I am using SO_NEW_DOCUMENT_ATT_SEND_API1 FM to send a mail to vendors....this is the logic they have written.. LT_MAIL1[]  having 4 mails id's...but problem is mail is not going.... can any body plz help me... DATA: LT_MAIL1 LIKE