Cant hear recorded sound

Hi everyone,
new to logic pro. i can record sound, signal seems to be coming through but i cant hear anything when i play the recorded part back.
can anyone help?
im hooked up through MW12cx interface
thanks!

Ok, you've installed the drivers for the MW12cx.
http://usa.yamaha.com/products/music-production/mixers/mw/mw12cx/?mode=model
Under the support tab.
In Logic's Preferences/Audio you have the Output Device: and Input Device: set to the Yamaha MC (or whatever the driver calls it)
So far, so good?
Create a project with some Audio tracks or audio + MIDI + Instrument tracks
Plug something into channel one of the Mixer, a mic or instrument, however you were using it before.
According to the docs you should press REC OUT on channel one to send it out USB.
Make sure you are getting signal level on the audio track, it should be a mono audio track and should have either Input 1 or 2 selected (experiment) After you get signal on Logic's meter try recording somethnig.
I don't have the manual so I'm flying blind, you should have sound coming back through the mixer at this point, maybe you need to disengage REC Out on channels one, or maybe you need to see if playback audio "returns" on any of the other channels.

Similar Messages

I CANT HEAR ANY SOUND FROM MY HP PAVILIION DV5

I CANT HEAR ANY SOUND FROM MY HP PAVILIION DV5 IT STARTED WHEN I PLUGGED IN MY MP3 HEADPHONES INTO MY PAVILION DV 5 LAPTOP AND IT WAS OK I HEARD SOUND THROUGH THE HEADPHONES BUT WHEN I PLUGGED IT OUT I COULDNT HEAR SOUND ANYMORE FROM MY PC BUT IF I PUT HEADPHONES OR SPEAKERS I CAN HEAR THROUGH THEM BUT I MEAN I CANT HEAR SOUND FROM MY PC WITHOUT HEADPHONES OR SPEAKERS PLEASE HELP WINDOWS VISTA HP PV DV5 32 BIT

See if you missed anything here:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01912228&lc=en&cc=us&dlc=en
Reminder: Please select the "Accept as Solution" button on the post that best answers your question. Also, you may click on the white star in the "Kudos" button for any helpful post to give that person a quick thanks. These feedback tools help keep our community active, so you receive better answers faster.

Hi when i playback videos on my phone, i cant hear the sound ....also when i call someone or when i get a call i cant put it on speaker mode because i can hear them but they cant hear me

hi when i playback videos on my phone, i cant hear the sound ....also when i call someone or when i get a call i cant put it on speaker mode because i can hear them but they cant hear me

Basic troubleshooting steps clearly outlined in the User Guide are restart, reset, restore from backup, restore as new device.
If you have been through ALL of the troubleshooting steps and you're still having problems, then you'll need to bring your phone to Apple for investigation.

I have iph 5 but the camera has crashed suddenly and cant hear any sounds on the phone

I have iph 5 but the camera has crashed suddenly and cant hear any sounds on the phone

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.

Can't hear recorded sound during video playback

I take a lot of videos of my kids. I have noticed lately that the volume is low or muffled...you can't hear what is being said even if they are screaming 6 inches away. I thought maybe something had gotten into the microphone, etc. I recorded a voice memo and on playback i could hear what was recorded just fine at a normal level. Now once I tried to record a video of my kids talking, it played back so low that i can't hear anything and that is with the volume turned wide open. Not really sure what this issue could be but if the volume works fine on voice memo wouldn't it work the same on video playback?

Hi there AmPriSi,
It sounds like you may be experiencing a microphone issue with your iPhone. Use the following article to help you address this issue:
iPhone: Microphone issues
http://support.apple.com/kb/ts5183
Take care, and thanks for visiting the Apple Support Communities.
Cheers,
Braden

What you hear recording sounds like Phase Shifter!

Hi, when I record with "What you hear (from youtube, etc.) it sounds like it came through a phase shifter: real bad. I have a dell xps 420 with Vista 32 bit and it'scame bundled with?creator premiere, adobe soundbooth, etc. Intel core tm2 quad cpu, 2.66 Ghz, memory 4GB
it seems to record ok with line in and mic. Can someone please help?

Actually, there's discussion about this all over the Internet.
The problem is your move to Vista and Windows 7
Under pressure from the record companies, the ability to record the Stereo Mix output of you computer has been disabled or removed from many new computers.
You may be lucky and find it's only been disabled on your machine. If so, then do the following:
To enable:
->> go to Control Panel
->> Hardware and Sound
->> Manage Audio devices
->> in the Recording tab window right click in the white area away from any devices and from the menu enable "Show Disabled Devices" and "Show disconnected devices"
->> right click on Stereo Mix to get the properties window and in Device usage "Use this device (enable)"
However, there have been many reports in here (you can do a search) that some computer manufacturers are actually removing this ability entirely, again under pressure from the record companies.
This being the case, you might try some software called Virtual Audio Cable: http://software.muzychenko.net/eng/vac.htm
You have to pay for it but at least there's a trial version so you can see if it works for you before laying out your money.
Bob

Cant hear any sounds beside the ringer sound.

I bought my iphone couple of weeks back . Been trying to listen to music through the speaker but it cant. The only sound i can hear through the speaker is the ring tone and the alarm . I can't even hear any of the tones for messages and stuff either . Anyone else with the same problem ?
PS : I tried resetting too

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.

I cant hear any sound for ringers and apps, but music and YouTube have sound, and all sounds work with the headp

I can't hear sounds from ringer and apps, like it's on silent but everything is turned up, and video and music sounds work fine... Plz help I just want my ringer to work!!

just go into settings go to sound and check that volume is up . and then go back home and make sure the side button volume is up if it doesnt work reply.

I cant hear any sound tracks

i am trying to listen to music or watch a movie i cant seem to hear any thing.
it shows that its working but i guess its blocked from some where any help please?

Enable *Universal Track Mode* in your Audio Preferences.
regards, Erik.

I cant hear recorded audio

im trying to record some vocals onto logic express 8 through a Mbox2 mini. its connected fine, and can actually record but i cannot hear it back. because of the mini box i have had to attach external speakers and when recording i cana hear the click but nothing after that. i am a beginner at all this so if you have any ideas please help with very simple explanation.
Thanks
Danielle

sorry..
i browsed that site but yet i didnt get the solution for my problem..
my problem is ..
i had done recording for 10 seconds without using rc.setRecordSizeLimit(int size), only i used rc.setRecordStream(output);.
if i tries to record for > 10 sec. without using rc.setRecordSizeLimit(int size) then java.lang.OutOfMemory exception comes.
but i want to record for more than 10 seconds. so i m using rc.setRecordSizeLimit(int size). after using it that exception doesnt come but i m unable to hear anything while playback.
so how to do the playback...?
Thanks..

Cant Hear any sound, only wen i use my headsets

no sound my volume dosnt go up or down only works with headsets

Hi Check control, panel the Halfmoon is it set to donot Disturb Is the switch on side of ipad set to red? Cheers Brian

Hello everyone. i have iphone 4s. there is a problem with speakers. i cant hear any sound when i receive a call and even i cant talk on speaker phone or listen to songs but without speaker i can call n listen to the other person whom i am calling. ???

is anyone facing same problem please help.
thanks

Kayla, check the grill that covers the microphone (bottom left next to charging port) and make certain there isn't any dirt, makeup, spilled soda clogging the grill causing it to fail. My sister had a similar issue with her earphone and while I was in the process of replacing it for the third time I decided to check the grill under a very bright light and it was totally clogged up causing her not to be able to hear her phone calls. Use a Q-Tip dipped in hot water and gently wipe the grill. Just barely moisten it, no need to go crazy with the water. Might as well clean the earphone and speaker on the bottom right too. Anyhow, that could be what your issue is and if so it's a really simple fix. If that doesn't help just replace the microphone. It'd cost maybe $5 and ten minutes of your time to do. Good luck, John

I can hear sounds from my laptop but cant hear using headphone

i am having hp pavillion g 6-1220se,serial no:5cd146766w,Product no-a8s15ea#abv.the problem is i can hear sound for some application like skype through my headphone,but cant hear any sound while playing movies .but my system speakers are working fine.please resolve this as early as possible,as i bought this hp only nearly one month ago

Hi,
Please enable Speakers in Playback devices as follows:
1. Right click speaker icon (right hand corner)
2. Select Playback devices
3. Right click Speakers
4. Enable it
5. Click Apply/Ok
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Why can i not hear any sound on my apps?

New Iphone 4, i can hear clicks, my itunes works - but i cant hear any sound on my apps? Ive checked settings and audio, but no luck. Tried playing with the volume buttons too....
Anyone had this issue?

If you quit the app and restart it, the sound will return.
To truly quit an app :
Press the home button to leave the app.
Double click the home button, this will reveal your recent apps,
The last one you used will be on the left. Press and hold the app's icon
And a 'x' will appear at the corner of the icon. Press the x and the app
Will quit.
Click the home button again, then restart the app in question.
Your sound should now be working.
I don't know why the sound stops, this happens to me on all my
IOS devices, iPhone, iPad, iPod.
Hoping some future update fixes the problem, but until then my
Method works.

Cant hear audio when I scrub

How to hear audio when I scrub in project library. Cant hear any sound when I scrub. I do when it plays back I move9

Scrubbing or 'skimming' as Apple calls it is controlled by a button on the Toolbar in iMovie:
The button on the left hand side is an audio waveform with a red-line drawn through it. This indicates skimming is turned off. To turn it on you just click it and the skimming feature will return.

Cant hear recorded sound

Similar Messages

Maybe you are looking for