Cant import my password file in my laptop (*.xml).

I have one computer with all password (x64). And now i want to get it into my laptop (x86).
In x64 computer i took " export password " in settings. So now i it is a *.xml file.
When i go into my laptop, so i cant find "import password" ?
What should i do?

The "Export passwords" option is not a standard feature of Firefox. You probably have the Password Exporter extension installed on the computer that you exported the passwords on. If you install this extension on the other computer, you should be able to import the xml file.
https://addons.mozilla.org/firefox/addon/password-exporter/

Similar Messages

  • Cant import my abbu file

    Hello,
    I reinstalled my Macbookpro (13 inch, spring 2009 model) with OS10.6 since Lion rendered lots of my software unusable. I have backuped my adressebook to a .abbu file from 10.7. Now, when I try to import the addresses to the 10.6 addressbook it starts to import and then hangs up. From then on, I can't even open the Address book. I have to delete the addressbook folder in the library/application support folder to get it back.
    Any ideas of how I could get access to my addresses?
    Thanks
    Markus

    Thanks, Alberto and Austin, for your tipps. Here is what finally worked (sort of):
    unpack the abbu package as suggested
    copy all the files to the ~/Library/Application Support/AddressBook/ folder
    install 10.7 over 10.6
    open Addressbook: voila, at least the addresses where all there (puuh!), however, the pictures my wife had added to adorn the addresses are gone.
    then I exported the addresses as VCF file, checked this time, that they can be reimported
    Now I am installing 10.5 again, then 10.6 because the diskimages I did on the way dont work for restoring the system. Makes me wonder why I did them in the first place. They supposedly should be scanned for restore which gives an "internal error" directly after completion of the scan.
    My apple skills clearly are rusty after 12 years of Windows use but I also must say, not too friendly if such things keep happening. After all, I was just following suggested procedures with backing up my abbu file nin the first place.

  • Cant import raw .MTS files

    I am running on an Intel Mac with FCS2, and I am not able to import .MTS files. I have a Panasonic AVCHD camera that uses SD cards instead of a hard drive, so I grabbed the MTS files off of the SD cards throughout an entire week of filming. How do I import these into FCS2 now? I only have the MTS files on my external drive. I have Voltaire, but its too slow.
    Thanks

    I think I might have answered my own question. The raw file that is brought in from Log and Transfer might be interlaced when you view it, however once I put it in my sequence and on the timeline, then exported the video, I choose to export at 1920x1030p30. When I view that, it looks perfect. Viewing the raw import file from either VoltaicHD, Log and Transfer, or Toast 9 all look pretty crappy before you convert and export as progressive in Final Cut. I'm happy with this, since my final video will obviously be exported through FCP anyways.
    So I think I am all set now, but if any of this sounds incorrect, someone please feel free to jump in and correct me. I am new to the whole Mac scene and Final Cut, and video editing in general.
    Thanks,
    Brandon

  • Cant import video from files

    I am trying to put a video into I tunes from the computer files. I tried what it sayds in the help section and nothing works. I cant find it no where into the Itunes library or files. Is there something that should be set so it will go into the Itunes or is this just a way for apple to make money.

    'i have downloaded iMovie 9.0.2
    Did you install iMovie?
    Exactly what happens when you try to upload from your camera?  Did you read your cam user manual?
    Have you tried using iPhoto?
    If you did not repair permissions and restarted your computer after installing iMovie, do so now.

  • V1.1 - cant import 40D .CR2 files

    hullo,
    so today i upgraded from my trusty 10D to the snazzy 40D. body is nice. snapping photos is fast. seeing them -- a nitemare.
    every time i try to import: LR recognizes my device, shows me the thumbs, and tries to convert to DNG and import. fails every time -- "the files use an unsupported color mode", and it lists all my .CR2 files.
    JPEGs work fine. ive tried multiple cards. looks like its a RAW2+LR thing.. yet i have the v1.1 update.
    help?
    thanks,
    matt

    Kate,
    If you hadn't heard, the people responding are not employees of Adobe, they are people who care to try to help others that are having problems. It would seem that the wire brush approach of your message will tend to get less help [if possible to provide] than a reasoned and thoughtful question.
    BTW, I have worked in large organizations and small organizations from 80 people up to 150,000 and as a member of management in the large org. I can tell you that large organizations are much slower to respond. Kind of like a rabbit can move much faster than an elephant.
    If you are not happy with the help people are trying to provide for free, then you maybe should not bother with this forum. It clearly is raising your blood pressure and that is not healthy.
    I would expect that we can expect an upgrade to 40D support before Thanksgiving [just my guess though]. In the meantime, I am going to follow the advice of the Luminous Landscape reviewer and shoot in RAW+JPEG [when my 40D arrives tomorrow] so I have the RAW on hand when the update occurs. It seems that the JPEG output is quite good and that may do in the interim.
    Good luck
    Mel

  • I cant import and export MPEG2 file

    i cant import and exportt file mpeg2 format in premier pro CS6. can u help me....

    http://helpx.adobe.com/premiere-pro/kb/features-presets-missing-premiere-pro.html

  • Hello, failing miserably here,  cant import nef files from aperture 3.1.2 to iphone 4.  I am syncing with the projects and smart albums and I am only able to sync the jogs and psd's   Anyone out there to aid this frustrated photographer??

    hello, failing miserably here,  cant import nef files from aperture 3.1.2 to iphone 4.  I am syncing with the projects and smart albums and I am only able to sync the jogs and psd's   Anyone out there to aid this frustrated photographer??

    See my reply to a later simplified version of your question. I don't think that either iPhone or iPad recognize RAW files such as NEFs. And the iPhone is not designed to be a mass storage device like a portable flash or portabel hard drive for temporary storage of files, if that's what you're after.  As I mentioned in my previous reply, I have an iPad and have been experimenting with it as a tool for photography, hoping that it would be a nice travel tool for backing up and viewing photos from my Nikon dslr. But both the iPad and iPhone just are not set up to do that well. Both show photos nicely, but organization of photos is very frustrating since you can't create albums on the iPhone or iPad, but only back on your sync computer. (There is one very powerful photo organization app called SortShots, but you import photos to it and it organizes and stores the images wtihin the app not using the native photo app. It doesn't work with NEFs either.) I don't know of any RAW processing software for either device.

  • How to save bloger password in firefox 3.6.6 ? common ways at internet such as changing nsLoginManager.js is not working because the notepad cant save the new file.

    how to save bloger password in firefox 3.6.6 ?
    common ways at internet such as changing nsLoginManager.js is not working because the notepad cant save the new file.
    == URL of affected sites ==
    http://blogger.com

    Some sites like PayPal, Yahoo, Windows Live and bank sites use ''autocomplete="off"'' to prevent Firefox from saving the name and the password.
    If a site uses ''autocomplete="off"'' then look at this article for a bookmarklet to remove that autocomplete attribute.
    http://kb.mozillazine.org/User_name_and_password_not_remembered (bookmarklet)
    http://kb.mozillazine.org/Password_Manager
    See also http://en.wikipedia.org/wiki/Bookmarklet

  • Cant import RAF files into lightroom 5.2

    I've just purchased lightroom 5 and I'm having problems importing my files. I first detected the problem with my CR2 files.
    After investigating I found this person with the exact same issue: http://forums.adobe.com/message/5474641 I managed to fix the problem by changing the prefrence file as indicated here: Preference and other file locations in Lightroom 5
    Now I'm trying to import my RAF files (Fuji x100) and I'm getting the exact same issue.
    What should I do now????

    First of all, thanks for the help.
    But I'm now more confused then before. I'll explain and I hope I wont confuse you in the process.
    It seems that, without having changed the permissions, 5 pictures from my Fuji were able to import into the Sub-folder I want from the copys I made on my desktop. The rest didnt. I tried it again and it didnt work. I tried it yet another time except into a distinct sub folder of the same main folder. It worked. NOTE: both subfolders are on a external drive.
    Then I tried to import new pictures directly from my SD card into both sub folder mentioned before. "Could not be read" message was given. So, I imported the images to my desktop with no problem but I can't move the files using LR into the subfolders on the external drive.
    I'm very inclined to agree with you both that its a permission issue with the folders on the external drive. The back story is that I've had past two separte problems with my computers hard drive and RAM. Part of the fix for those issues was to creat new user accounts. The old ones have not been deleted. (dont know how)
    I'm telling you this because, in the sharing and permission window, the sub folder I want all these pictures to go dosent give the same User name as the main folder or other folders within it.
    Main Folder has the correct user account (Privilage set to read and write) Below is staff (which is I've changed to read and write) and below that Everyone (which I've left as read only)
    Sub folder I wish pictures to go has and Old User name. Below is not staff but Fetching and privilage is set to read and write.
    I hope I havent confused you too much. I cant wrap my head around the fact that 5 pics managed to enter the sub folder without it being set to the correct user.
    Must be said that this sub folder is in my personal (not profesional) work, which I havent touched for a while now.
    any questions??? cause I still have a tonn

  • I cant import any file

    I habe to Windows on my PC, 7 and 8, I dont have Problems with my win7 but in Win8 I cant import any file in my iTunes. Please help me

    We know nothing about your system nor do we know anything about the files. It stands top reason that they are in a format AE simply doesn't understand. And well, special characters like question marks have no place in user folders and can cause all sorts of trouble. Rename your folders appropriately.
    Work File Safety | Mylenium's Error Code Database
    Mylenium

  • Cant import raw files from sony rx1003 into iPhoto

    Cant import raw files from sony rx1003 into iPhoto.  with rx1002 no problem! any suggestions?

    Every model of a manufacture's camera have a different  RAW format and, therefore, you'll have to wait until Apple receives the necessary information from Sony so they can create a RAW Compatibility Updater that includes that model.
    In the meantime you can try the Adobe RAW converter with might support that camera model to create a dmg file that iPhoto will recognize and begging shooting the highest resolution jpegs until the updater is released.

  • I cant import or place tiff and psd files

    I cant import or place tiff and psd files, but jpg - its ok. This trouble is on User Account. In Admin Acc -  there is no problem. Illustrator CS5 (UA).

    To fix registry, refer to this article:
    iTunes for Windows: "Registry settings" warning when opening iTunes
    http://support.apple.com/kb/TS3299

  • ITunes cant import WMA files

    Windows Media Audio files cant be imported into iTunes. I bought a Olympus Digital audio recorder WS-100 and it seems to be one of the only models that works on a Mac, but I cant import the audio to iTUnes and I cant burn them to audio CD's that 99.9% of the world can read.
    is there a way?

    Maybe I'll stick with tapes. What a pain.. I have to buy software that costs about $30 just to burn a CD from my digital recorder. Nah I'll stay with tapes.
    Got any digital recorders that record into a non WMA format? Dont reccommend me a iPod accessory, as the features are lacking compared to a standalone digital recorder.
    My Zire 72 records into a WAVE format, but the audio quality cant compare to a standalone digital recorder.
    Besides I can get more audio on a tape than on a CD and I have a ton of them left.
    Perhaps I'll just stay with tapes. What a shame that I have to spend $30 just to import the audio into iTunes so I can burn a CD.
    John
    Message was edited by: John Wolf

  • HT3825 i cant import my 5d 3 raw file using iphoto. how i can solve my problem? i already download the last version of adobe raw ubdat

    i cant import my 5d 3 raw file using iphoto. how i can solve my problem? i already download the last version of adobe raw ubdat

    A Good samaritan answered this for me on another forum
    How to update Camera Raw

  • I've imported from a video camera and the files on the laptop are not playing the sound, is there any way to retrieve it?

    I have just uploaded a large number of files from a panasonic video camera on to imovie. I have never had this problem in the past, but when I try to play back the files on my laptop there is no sound. I have tried increasing the sound and normalising via the audio settings, and the sound is playing fine on the video camera. Is there anything I can do?

    I have also checked that the files are MOV not MPEG etc

Maybe you are looking for