Cant import project plan to project server

Hi
Getting below error when i try to upload the project plan from my desktop to project server in 2010
I had a glimpse on related Project server forums and project server error codes it says
LookupTableItemInvalidLookupTable = 11073
An item in the lookup table is not valid.
Can you please help me to resolve the issue
Regards
Santosh

Their is not tool which can perform this for you.
You have to do it manually,you can do shorting for all the custom field then match the values of look up table if you have any document for custom field and look up configuration.
kirtesh

Similar Messages

Error Message when opening Project Plan on Project Professional from PWA 2013 using either Google Chrome or Firefox

Dears,,
One of our clients uses Google Chrome
as their standard navigator to open PWA 2013 that we have deployed for them.
Every thing went fine until we tried to open a project plan using Project Professional 2013 from PWA using the Edit in Project Professional option, we had the below error:
"Project Web App was unable to find the specified Project.
the project was not found on Project Web App. some possible reasons include:
The Project has not yet been saved successfully to the server.
The Project has been deleted on the server.
you don’t have adequate permissions to open this project.
if the project is available in the local cache, you can click the globe in the status bar and select "Work offline", and then open the project, if the problem continues, contact
your administrator."
Please note that IE is working fine with this scenario,
the belwo screenshot shows the error that appears to the users.
Ibrahim Al-Masri Technology Manager at MethodCorp

Hi All,
As Gary and Guillaume suggested, have you tried to install IE tab extension for chrome?
See the link below:
http://www.ietab.net/
and also im with what Dale has posted
(why don't you just tell the PM to use Internet Explorer instead of Google Chrome?
I suspect that this problem reveals that PWA does not work perfectly in browsers other than the Internet
Explorer,
so I would simply mandate that all PMs and TMs need to use Internet Explorer for Project Server.
Just a thought. Hope this helps.)
from my side , i have tested it and it works perfect.
Karim El Zarka, MCTS Sharepoint 2010 , MCITP SharePoint Administrator 2010 Whenever you see a reply and if you think is helpful, click "Vote As Helpful"! And whenever you see a reply being an answer to the question of the thread, click "Mark
As Answer

Error in saving project plan in project server 2007

I am getting following error when I try to make a change and saved the project plan. It has happened several times since yesterday. Not sure if the file is corrupted.
Is it possible to make a copy of the file and mark the current file as inactive?
The File cannot be opened.
Check that the File name and path are correct.
Check that the File format is recognized by Project.
Project Files saved in a version earlier than Microsoft Project 98
can't be opened.
If your File is From an earlier version, open it in that version, click
Save as (File menu), and save in MPX Format Open the MPX File. When
you use this method, project data is imported, but Formatting is lost.
Has any one has same issue? any suggestions please reply.
Thanks-

Hi Micahel,
Thanks for the posting!
what would be solution inorder to make it working.i was looking at some posts which i listed below for some it had worked....i did not try it but just guessing it would work
1. Launch Project Professional 2007 and connect to Project Server.
2. In the new blank project (Project1), click Insert - Project.
3. Select the troublesome project.
4. DESELECT the "Link to project" checkbox and then click the Insert
button.
5. When prompted to save the changes to the troublesome project, click the
No button
Or in another case it may be
Saving as a template with re-open is a smart work around, typically when a network connection gets dropped. In these cases
we have copy/pasted to a new file, or, saved as XML and then reopened.
I appreciate any kind of help on it.
Thanks
Tummala

MS Project Professional 2010 - Unable to open Project Plan from the Server.

Dear Folks,
Since morning we have been facing an issue with MS Project Professional 2010. When we try to open project plan, it takes time and then show nothing on the screen, project gets checked out to you as well but nothing comes on MS Project Professional Screen.
Strange thing, when busy mouse cursor gets released MS Project Professional show "Disconnected from the Server" message with white icon instead of globe one at the bottom of MS Project Professional and disappear after few seconds.
We are able to open small plans but the plans having 4000 lines is not able to open, Project Professional show busy status when we give it a try.
Everything seems fine to me .. Project Server connection .. queue jobs .. no issues.
What could be the possible problem and how to resolve this issue?
Many thanks in advance.
Best Regards

Hi Mohsin,
Is it happening for all users or just some of them? Is it happening for all projects? Have you tried on a different machine?
First I'd suggest to try accessing the project plan through PWA to identify wheither it is a network issue or an application issue.
Then check the Project Pro account to ensure that the connection settings to Project Server are correct. You could also try to remove the Project Server account in Project Pro and create it again.
Finally, ensure that the PWA URL is added to IE trusted sites.
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller |

How to change actual effort in project plan when Projected Actual option is enable in Project Server 2010

Hi,
We have enable "Protect User Updates" option from PWA->Task Setting and Display->Only allow task updates via Task and Timesheets, to protect actual efforts in project plan that PM changes manually, however in some cases we need to allow actual
effort changes in open projects so it there any way or workaround so that Administrator or PM can make changes in actual even though "Protect User Updates" option is enable. Please Help!!
Thanks,
Rahul

Hi Rahul,
Indeed when this option is activated, there is no way to directly update actual work in the project plan.
The workaround is to temporary deactivate this option, more preferly not during office working hours to avoid unexpected project updates.
A better workaround would be to ask the resource to recall, correct and submit again the timesheet, so the PM can approve an updated actual work. Finally the PM can use delegation to rscall and correct the timesheet for the resource.
Hope this helps.
Guillaume Rouyre - MBA, MCP, MCTS

BPC Project plan template, project questionaries template

Hello,
I would like to know if there are templates of questionaries for a project in BPC?, Also if there are Project plan templates for BPC? I need all the information you could send me in order to estimate times and complexity of a BPC Project. Information will be rewarded.
Thanks

Dear Teachers,
I am also need BPC Project plan template, anyone have it?
for Mr. Alexander : Did you finish your BPC project? I need your guidance and the template is the most important.
Thanks you very much for you all.
Thanks and Best Regard
Sendy
SAP Consultant

Is Oracle Project Management has all features which Microsoft Project Plan?

Hello Experts,
Customer wanted to start using Oracle Project Management suit completly along with little Microsoft project plan. as of now most of the projects are using microsoft project plan for project management and Oracle Project suit is for Costing and Billing.
But in order to start this initiative, we need to explain the difference which Oracle Project Management can not able to do but Microsoft project plan can. Based on this management will take the decesion.
As per my understanding, Orace Project Management can perform all the tasks except scheduling. As it supports scheduling from third party software like Microsoft project plan / primavera etc.
Rest I think Oracle Project management suit is equally matured to perform all the project management task which Mircosoft project management can perform.
So experts , can you please confirm my understanding and provide me some light on this topic.
Thanks :-)

Hi,
First of all, I would like to know what are the various things you are performing with a Microsoft project plan apart from scheduling the resources to a specific project .
Through Oracle Project Management, you can control the visibility of a resource,assign it to a particular project and control the tracking of the time in various assignments.If that is what you are trying to achieve through Oracle Project Management icnluding the other features it has, you can surely go for it.
Let me know if you have any doubts on it.
Regards,
Tanvi

Why MS Project Checks Out Project after Choosing Read-Only

All,
Below is an quote from one of our MS Project users:
"When users try to do a Read Only of a project plan, MS Project is checking the file out to them. When I go in to edit the plan, I can't because the file is checked out. I inform the user who it is checked out to, but they
are unable to check the file back in because they never checked it out to begin with."
When the above happens, the admin will have to force the check-in. Is the above by design or is it a bug? We are using Project Server 2010.
Thanks

If it is CU Dec 2011, I guess you do not have SP2 installed, which you should do asap.
That being said, I suspect this is due to a wrong manipulation since it would be an obvious and unacceptable bug. Can you detail step by step the process to reproduce this unexpected behavior?
Hope this helps,
Guillaume Rouyre, MBA, MVP, MCP |

Bulk Import Projects along with Project Plan

Hi,
I am working on a requirement to bulk import Projects into Ms Project Server along with associated Project Plans. I have checked Solution Starter Bulk Create source code. However, the source code doesn't check-in project plans associated with
projects.
It just creates Projects. I am looking for approach and alternatives to implement this requirement. Any help in this regard will be appreciated.

Hi,
From experience you will be able to create Bulk project up to Project details only , for schedule level consider using PSI to Add tasks under the projects.
Regards, Syed Faizan ur Rehman, CBPM®,PRINCE2®, MCTS

Project Server 2010 Timesheets not Updating Project Plans

We have several project plans that are not getting updates from approved timesheets.
Troubleshooting steps I've taken:
1) Verified the timesheet/task submissions by the resources
2) Verified they have been approved
3) Verified they have been accepted by the Status Manager and processed
4) All project plans have been published (I even used ProjTool ON the App server to do a full publish of all plans as a second step of publishing)
5) Verified OLAP was built successfully overnight (and every night)
6) Tasks have both remaining work and NO actual work in the Resource Usage view
7) Had a user recall and resubmit his timesheet using "Send Timesheet" to see if the task updates would come through - they did not (I am Status Manager and the timesheet shows Approved), and even published the plan and rebuilt the OLAP again,
just in case.
8) Verified that no tasks are marked for closure under Close Tasks for Update in Server Settings.
9) Verified Timesheet shows Actual Work on the Tasks via Pivot Table; compared Timesheet_User_View with MSP_Portfolio_View pivot table for project which shows 0 hours. Timesheet_User_View shows 33 hours.
All tasks have Remaining Work, are within the date range of the timesheet and are open for submitting time. Timesheets are still out of sync with project plans for many users and there is no apparent reason. I'm out of ideas!

Hi,
In status manager's approval center, history, status updates, can you check the status of the approval? Do you have any errors in the ULs log for the approval or publish jobs?
Hope this helps,
Guillaume Rouyre, MBA, MVP, MCP |

MS Project 2010 Server - How to move a single MS Project plan and SharePoint Project site from a PWA server to another PWA server (one at a time)

MS Project 2010 Server
How to move a single MS Project plan and it's SharePoint project site from a PWA server to another PWA server (one at a time)
I have 2 Project PWA servers, i know how to copy all the databases (Publishing, Draft, Reporting, archive, content) from one SQL server and copy it to the other PWA server so both server can be identical.
I need to only move a single project from a PWA server to another,
Moving the Project plan, actual time data, SharePoint site with all it's content
Is there a 3rd party tool that can be added on to the server to help me move single project plans? to different PWA servers?
-Isaack

Visit my friends at FluentPro and try FluentBooks
http://www.fluentpro.com/productsfluentbooks2013.html
they have a 2010 version also.
Hope that helps,
Thanks, Eric S. Pcubed

Hello, failing miserably here, cant import nef files from aperture 3.1.2 to iphone 4. I am syncing with the projects and smart albums and I am only able to sync the jogs and psd's Anyone out there to aid this frustrated photographer??

hello, failing miserably here, cant import nef files from aperture 3.1.2 to iphone 4. I am syncing with the projects and smart albums and I am only able to sync the jogs and psd's Anyone out there to aid this frustrated photographer??

See my reply to a later simplified version of your question. I don't think that either iPhone or iPad recognize RAW files such as NEFs. And the iPhone is not designed to be a mass storage device like a portable flash or portabel hard drive for temporary storage of files, if that's what you're after. As I mentioned in my previous reply, I have an iPad and have been experimenting with it as a tool for photography, hoping that it would be a nice travel tool for backing up and viewing photos from my Nikon dslr. But both the iPad and iPhone just are not set up to do that well. Both show photos nicely, but organization of photos is very frustrating since you can't create albums on the iPhone or iPad, but only back on your sync computer. (There is one very powerful photo organization app called SortShots, but you import photos to it and it organizes and stores the images wtihin the app not using the native photo app. It doesn't work with NEFs either.) I don't know of any RAW processing software for either device.

SQL Query to get Project Plan Name and Resource Name from Reporting database of Project Server 2007

Can you please help me to write an SQL Query to get Project Plan Name and Resource Name from Reporting database of Project Server 2007. Thanks!!

Refer
http://gallery.technet.microsoft.com/projectserver/Server-20072010-SQL-Get-a99d4bc6
SELECT
dbo.MSP_EpmAssignment_UserView.ProjectUID,
dbo.MSP_EpmAssignment_UserView.TaskUID,
dbo.MSP_EpmProject_UserView.ProjectName,
dbo.MSP_EpmTask_UserView.TaskName,
dbo.MSP_EpmAssignment_UserView.ResourceUID,
dbo.MSP_EpmResource_UserView.ResourceName,
dbo.MSP_EpmResource_UserView.ResourceInitials
INTO #TempTable
FROM dbo.MSP_EpmAssignment_UserView INNER JOIN
dbo.MSP_EpmProject_UserView ON dbo.MSP_EpmAssignment_UserView.ProjectUID = dbo.MSP_EpmProject_UserView.ProjectUID INNER JOIN
dbo.MSP_EpmTask_UserView ON dbo.MSP_EpmAssignment_UserView.TaskUID = dbo.MSP_EpmTask_UserView.TaskUID INNER JOIN
dbo.MSP_EpmResource_UserView ON dbo.MSP_EpmAssignment_UserView.ResourceUID = dbo.MSP_EpmResource_UserView.ResourceUID
SELECT
ProjectUID,
TaskUID,
ProjectName,
TaskName,
STUFF((
SELECT ', ' + ResourceInitials
FROM #TempTable
WHERE (TaskUID = Results.TaskUID)
FOR XML PATH (''))
,1,2,'') AS ResourceInitialsCombined,
STUFF((
SELECT ', ' + ResourceName
FROM #TempTable
WHERE (TaskUID = Results.TaskUID)
FOR XML PATH (''))
,1,2,'') AS ResourceNameCombined
FROM #TempTable Results
GROUP BY TaskUID,ProjectUID,ProjectName,TaskName
DROP TABLE #TempTable
-Prashanth

Project Server 2013, cannot open project plan in pwa

I have a clean installation of Project Server 2013 and am able to save project plans, send assignments and receive task updates.
The one error so far i'm running into is when I try to open any project plan from PWA - I get the following error:
"we couldn't find the project detail page for this project. see the system administrator."
Can someone assist in resolving this issue?
Thank you,
Damon Curtin | New Signature

Damon,
Navigate to Project Web App>>PWA Settings
Select Enterprise Project types option from "Workflow and Project Details Pages" section
Validate "available project details page section" by default schedule and project details should be selected in right hand side column, if it is not then add these two pages and click save.
Hrishi Deshpande – Senior Consultant DeltaBahn
Blog | < |
LinkedIn
Please click Mark As Answer; if a post solves your problem or Vote As Helpful if a post has been useful to you.This can be beneficial to other community members reading the thread.

Project Server 2013 - Project Plan crashes frequently

Team,
We are using EPM , and everytime we update the project plan using enterprise project, the plan crashes and it does not allow me to publish the plan on the Project server.
Please suggest solution for the above
We are using Project Server 2013
Regards
Vidhya

Vidhya --
First of all, is your Project Server 2013 system updated with the latest Cumulative Updates and/or with Service Pack 1 (just released yesterday)? If not, I would strongly suggest that you update your system and your copies of Microsoft Project 2013
with Service Pack 1 at the earliest date possible.
Second, regarding this project in particular, I would strongly suspect that this project is corrupted. To resolve the corruption, you will need to use the Save for Sharing feature in Microsoft Project 2013. To do this, right-click anywhere on
a ribbon tab in Microsoft Project 2013, such as the Tasks tab, and then select the Customize Quick Access Toolbar item on the shortcut menu. In upper left corner of the Project Options dialog, click the Choose Commands From pick list and select
the All Commands item. In the list of commands on the left side, select the Save For Sharing item and click the Add button to add it to the list on the right. Click the OK button when finished.
To use the Save for Sharing feature, do the following:
Open the enterprise project in question.
Click the Save for Sharing button in the Quick Access Toolbar.
In the Save dialog, save the MPP file to a location where you can find it easily, such as your computer Desktop, for example.
Close the MPP file.
Reopen the MPP file.
Click File > Save As and then save the project.
When the Save operation is done, try publishing the project.
Please let us know if this helps.
Dale A. Howard [MVP]

Cant import project plan to project server

Similar Messages

Maybe you are looking for