Cant insert item into DO eventhough MMBE got stock
Hi,
When I am trying to insert an item which still got stock in MMBE, I got an error and mentioned that 0 stock is available for that item. I had found the root cause where it is because of safety stock is maintained on that item. I am trying to find solution where I could insert the item into the DO without considering the safety stock figure by following this thread Want to use Safety Stock and still not able to go through it. May I know what should the next steps I should check on it?
Thanks.
Pra,
I already maintain the Share of safety stock which can be used for planning in OPPR as 100% and assigned the MRP group into my material. I also set the service level% to 1%, however when I go to do DO, it allow me to use all the safety stock up. Let say I got 100pc and I set the service level as 1%, which mean I should only can create DO for 1 pc for that material, however it is not working, any idea to help me out?
Thanks.
Similar Messages
-
Inserting items into List on a JSP
I want to insert new items into a multiple select list from database
on selecting an item from an existing list in a JSP.
I am not sure how to do this.
thanksThis is basically performing partial page rendering. There is no way for HTML or JavaScript executing in a user's browser to communicate directly with Java or your database. You'll either have to "preseed" the values from the database into the HTML page using JavaScript, and then change the select list w/ JavaScript based on what the user selects (this is how it's usually done.)
Or, you could do something like using a hidden IFrame as a data conduit to your JSP which sends JavaScript back to the browser and updates the select list with the new values. A little more tricky, and doesn't work w/ all browsers, but it would work better if the data in question can be arbitrarily large.
Hope that helps. -
Error inserting items into empty dock
OS: 2.1.0.1088
I emptied out the dock to reorganize my icons, and now the dock is unusable. Every time I try to insert something, the item I'm trying to insert disappears into the ether and I get a "array_insert invalid array index" notification.
Also, the browser was the first thing I tried to put into the empty dock, and its disappearance has left me no easy way to start the browser.
Thanks for your help.reset or security wipe your playbook and then check out
-
Cant insert Text into a TextBox. (Confusing Problem, CS6)
Hello forum members!
Just got the trial today and I am trying to insert text into a document. I press "T" and drag a box for a textbox. I then double-click inside that box to type something, and whatever I type absolutely NOTHING appears. It just blinks and nothing is actually typed inside the box.
This is really frustrating. I have only just started and have one document that is fresh, so my question is what is the problem here?
Thanks in advance,
Shane StocksCould you elaborate on that a little? I have taken a screenshot of my screen to show you how everything is. I have not touched any settings and have literally downloaded the trial about an hour ago.
I do this. Click on the T, drag a box, then start typing. When I type, the icon does not move, and for some reason it seems what I am typing renames the layer tab. Please view the image, everything is there.
Thanks again,
P.S. The text-box does dissapear when the icon changes into a text icon, and the image above is me typing random things. Nothing appears. -
Cant insert media into dreamweaver keep getting an error message
Whats going on forum, I've trying to insert sound into dreamweaver from a track that i made in garageband. I keep getting an error message saying the kind of plugin cannot be found
Save as MP3 and use an HTML5 audio player.
http://www.pickleplayer.com/
You can see a working example of the MP3 Player button on this page:
http://alt-web.com/DEMOS/SmoothScroll.shtml
Nancy O. -
Inserting new line item into existing delivery using BAPI
Hi
can you send me the code for inserting new line item into existing delivery either using BAPI or
Function module.
We are using SAP 4.7 versionHi Sreekanth,
Refer to this links
New item for outbound delivery via FM/BAPI?
/message/3976349#3976349 [original link is broken]
BAPI_OUTB_DELIVERY_CHANGE Help - Add new line item
hope it is useful to you.
Regards! -
Insert hyperlink into Text Item
I'm looking to create a footer text item for all reports that has a link that will launch an email to the BI team. I was able to find some javascript that I can use to launch Outlook but I can only get it to work with a button item or link item. I can't seem to figure out how to insert it into a Text Item.
What I want is:
"If you have any question please contact BI Team"
where BI Team is the link.
Thanks.Hi,
i hope you want this functionality in WAD report. have u tried "HREF" in HTML code of WAD for that link.
for example: you want to open the link on clicking on "BI Team" so write a code in WAD like this
"If you have any question please contact <a href="http://mail.google.com/" target="_blank" >BI team</a>
Hope this will solve you query
Thanks,
Om Ambulker -
How to insert more t then one web item into single tab in WAD
Hi Gurus , How can i insert one Chart , table and dropdown item into same tab in wad
Please advice
TQ
BRHi,
Currently it is not possible to assign more than one item to a tab. But you can use a container item and place several items in this container item. Afterwards you assign the container to one tab.
Best regards,
Janine -
Inserting FLASH into Dreamweaver cs3
I am trying to build a VERY basic website in Dreamweaver. Using their single fixed column, centered,template, i would like to ad 2 flash items, a menu and small movie, in to he top of the column. (Both flash items are larger than the column with, if that matters,i was going to resizxe them nce i got this part of the cose correct)
For some reason the flash movie shows in my Dreamweaver preview, but not when i load it live online @ www.srg-buffalo.com.
The address i have used for the flash movie is: http://www.srg-buffalo.com/flash/header_v8.swf
The website is hosted at www.swq-buffalo.com, if you want to check out the source code.
I have no idea what I am doing wrong, i thought it was pretty simple, there is no flash block via my go daddy host.
How i inserted it via dreamweaver cs3:
Insert> Media> Flash.
URL= http://www.srg-buffalo.com/flash/header_v8.swf
What am i doing wrong?
Thanks for any help.Thank you,
That rung a bell.
I uploaded both saved .SWF documents to the Scripts directory.
There was also a Scripts dirrectory saved with index.html, in this directory was the AC_RunActiveContent.js file,any thoughts on that?
i uploaded it to scripts,along witht he others, and the space dedicatd to the flash events is there, but they are not showing.
http://www.srg-buffalo.com/
D. Jude Bulera
Buffalo, NY
[email protected]
Date: Wed, 17 Aug 2011 12:45:32 -0600
From: [email protected]
To: [email protected]
Subject: Inserting FLASH into Dreamweaver cs3
When you insert the SWF, you shouldn't have to actual type anything - it's a browse and select process and will automatically enter the correct path to the SWF. Then you have to upload the page and the SWF file. This next part I think has changed in later versions of DW, but in CS3 I'm pretty sure the process will also create a folder named Scripts. This folder along with it's contents also need to be uploaded.
> -
SharePoint Btach Process with List string items into list
Hi
I have a List<string> with 8000 elements.
I need to take 1000 everytime and run the batch process to insert data into list.
I cant apply all 8000 items in one shot.
Can you please suggest me that how i can query List<string> and execute.
Thanks
SiddarthaYou need to use Skip and Take methods of your object collection.
Example:
list.Skip(1000).Take(1000)
This would skip the first 1000 and take the next 1000.
You'd just need to increase the amount skipped with each call
List<string> list = new List<string>();
//Code to get 8000 elements
for (int index = 0; index < 8; index++)
List<string> batchList = GetBatch(index, list);
//Code to insert data into list
And here is the GetBatch method...
public List<string> GetBatch(int pageNumber, List<string> list)
return list.Skip(pageNumber * 1000).Take(1000);
I found the answer
here. -
I wish to insert data into a table only when the value of the inserted data has changed. Thus, in a time series, if the value of the data at time, t-1, is 206 then if the data to be inserted at time t is 206, then it is skipped (not entered).
If the value of the data at time t+1 is 206, it is skipped also; until the value changes, so if the value at t+1 was 205, then that would be inserted, and if at time t+2 the data is 206, it would be inserted too.
What is the best way to do it without increasing overheads?This view works:
SELECT
i.IDNO,i.[Date],i.[Level]
FROM
mytable i
INNER
JOIN mytable
d
ON
d.IDNO
= i.IDNO-1
WHERE
i.[Level]
<> d.[Level]
on this mytable below. A trigger could be quite useful here although I am cautious using them. However I wish to avoid the overhead by not having a temp table (which could be sizable). mytable below
should give 3 lines. The IDNO is an identity column.
IDNO
Item
Date
Level
1
X24
12/23/13 10:41
22996
2
X24
12/23/13 10:41
22996
3
X24
12/23/13 9:21
23256
4
X24
12/23/13 9:21
23256
5
X24
12/23/13 9:22
23256
6
X24
12/23/13 9:22
23256
7
X24
12/23/13 9:22
22916 -
Need to insert values into a table from a XML file
Hi,
I'm an Oracle 9i/10g DBA with quite a few years experience, but I'm new to XML and dealing with it in database terms. I've been given a project that entails pulling XML values out of a file (or 100's of them) and storing them in the database so that they are searchable by end-users. The project is classified as secret so I'm unable to upload the specific XML or any info relating to the structire of the XML or the table I will use to insert the values into - sorry!! So, I've created an XML file with a similar structure to help people understand my predicament.
The end-users only need to search on a subset of the total amount of columns from the table I'll insert data into, although the XML file has a lot more, so I dont need to store the other values - but I will need to store the name of the XML file (or a pointer to it so I know what XML file a particular set of values belong to) in another column of the table along with its associated values.
I've been using the XMLTABLE function with some degree of success, although I had better succes using the XMLSEQUENCE function. However, I found out this is deprecated in 10g and replaced with XMLTABLE, so I guess it's better if I use this in case we ever need to upgrade to 11g.
The main problem I've been having is that some elements in the XML files have multiple values for the one record when all the other records are the same. In terms of storing this in the database, I guess it would mean inserting multiple rows in the table for each element where the value differs. Here is a dumbed down XML file similar to what I've got along with the other SQL I've used:
+<?xml version="1.0" encoding="UTF-8"?>+
+<House>+
+<Warehouse>+
+<WarehouseId>1</WarehouseId>+
+<WarehouseName>+
+<Town>Southlake</Town>+
+<State>Texas</State>+
+</WarehouseName>+
+<Building>Owned</Building>+
+<Area>25000</Area>+
+<Docks>2</Docks>+
+<DockType>Rear load</DockType>+
+<WaterAccess>true</WaterAccess>+
+<RailAccess>N</RailAccess>+
+<Parking>Street</Parking>+
+<VClearance>10</VClearance>+
+</Warehouse>+
+<Warehouse>+
+<WarehouseId>2</WarehouseId>+
+<WarehouseName>+
+<Town>Poole</Town>+
+<State>Dorset</State>+
+</WarehouseName>+
+<WarehouseName>+
+<Town>Solihull</Town>+
+<County>West Midlands</State>+
+</WarehouseName>+
+<Building>Owned</Building>+
+<Area>40000</Area>+
+<Docks>5</Docks>+
+<DockType>Rear load</DockType>+
+<WaterAccess>true</WaterAccess>+
+<RailAccess>N</RailAccess>+
+<Parking>Bay</Parking>+
+<VClearance>10</VClearance>+
+</Warehouse>+
+<Warehouse>+
+<WarehouseId>3</WarehouseId>+
+<WarehouseName>+
+<Town>Fleet</Town>+
+<County>Hampshire</County>+
+</WarehouseName>+
+<Building>Owned</Building>+
+<Area>10000</Area>+
+<Docks>1</Docks>+
+<DockType>Side load</DockType>+
+<WaterAccess>false</WaterAccess>+
+<RailAccess>N</RailAccess>+
+<Parking>Bay</Parking>+
+<VClearance>20</VClearance>+
+</Warehouse>+
+</House>+
CREATE TABLE xmltest OF XMLTYPE;
INSERT INTO xmltest
VALUES(xmltype(bfilename('XML_DIR', 'test.xml'), nls_charset_id('AL32UTF8')));
Consequently, I need to...
1) Retrieve the results from the XML file for all 3 warehouses where multiple values for the same sub-element are shown as 2 rowsthe result set. (I am guessing there will be 4 rows returned as warehouse sub-2 has 2 different elements for <WarehouseName>.
2) Build a case statement into the query so that regardless of the sub-element name (i.e State or County), it is returned into the 1 column, for instance County.
So, if I run a query similar to the following...
select y.WarehouseId, y.Town, y.County, y.Area
from xmltest x, xmltable('/House/Warehouse' .......
I would like to get results back like this...
ID Town County Area
1 Southlake Texas 25000
2 Poole Dorset 40000
2 Solihull West Midlands 40000
3 Fleet hampshire 10000
Sorry for the non-formatting but I hope this all makessense to someone out there with what I'm trying to do.
I appreciate any help whatsoever because, as i said before, I'm totally new to XML and trying to read the vast amount of information there is out there on XML is all a bit daunting.
Many thanks in advance,
Shaun.Hi again,
Thanks for keeping the post open for me. I've had a look at the post illustrating the XFileHandler package, and tried to alter it to make it fit with my XML files. To help explain things, my XML file looks like this:
<?xml version="1.0"?>
<!DOCTYPE CMF_Doc SYSTEM "CMF_Doc.dtd">
<House>
<Warehouse>
<WarehouseId>1</WarehouseId>
<WarehouseName>
<Town>Southlake</Town>
<State>Texas</State>
</WarehouseName>
<Building>Owned</Building>
<Area>25000</Area>
<Docks>2</Docks>
<DockType>Rear load</DockType>
<WaterAccess>true</WaterAccess>
<RailAccess>N</RailAccess>
<Parking>Street</Parking>
<VClearance>10</VClearance>
</Warehouse>
<Warehouse>House
<WarehouseId>2</WarehouseId>
<WarehouseName>
<Town>Poole</Town>
<State>Dorset</State>
</WarehouseName>
<WarehouseName>
<Town>Solihull</Town>
<County>West Midlands</County>
</WarehouseName>
<Building>Owned</Building>
<Area>40000</Area>
<Docks>5</Docks>
<DockType>Rear load</DockType>
<WaterAccess>true</WaterAccess>
<RailAccess>N</RailAccess>
<Parking>Bay</Parking>
<VClearance>10</VClearance>
</Warehouse>
<Warehouse>
<WarehouseId>3</WarehouseId>
<WarehouseName>
<Town>Fleet</Town>
<County>Hampshire</County>
</WarehouseName>
<Building>Owned</Building>
<Area>10000</Area>
<Docks>1</Docks>
<DockType>Side load</DockType>
<WaterAccess>false</WaterAccess>
<RailAccess>N</RailAccess>
<Parking>Bay</Parking>
<VClearance>20</VClearance>
</Warehouse>
</House>
<?xml version="1.0" encoding="UTF-8"?>
<House>
<Warehouse>
<WarehouseId>4</WarehouseId>
<WarehouseName>
<Town>Dallas</Town>
<State>Texas</State>
</WarehouseName>
<Building>Owned</Building>
<Area>25000</Area>
<Docks>2</Docks>
<DockType>Rear load</DockType>
<WaterAccess>true</WaterAccess>
<RailAccess>N</RailAccess>
<Parking>Street</Parking>
<VClearance>10</VClearance>
</Warehouse>
<Warehouse>
<WarehouseId>5</WarehouseId>
<WarehouseName>
<Town>Dorchester</Town>
<State>Dorset</State>
</WarehouseName>
<WarehouseName>
<Town>Solihull</Town>
<County>West Midlands</County>
</WarehouseName>
<Building>Owned</Building>
<Area>40000</Area>
<Docks>5</Docks>
<DockType>Rear load</DockType>
<WaterAccess>true</WaterAccess>
<RailAccess>N</RailAccess>
<Parking>Bay</Parking>
<VClearance>10</VClearance>
</Warehouse>
<Warehouse>
<WarehouseId>6</WarehouseId>
<WarehouseName>
<Town>Farnborough</Town>
<County>Hampshire</County>
</WarehouseName>
<Building>Owned</Building>
<Area>10000</Area>
<Docks>1</Docks>
<DockType>Side load</DockType>
<WaterAccess>false</WaterAccess>
<RailAccess>N</RailAccess>
<Parking>Bay</Parking>
<VClearance>20</VClearance>
</Warehouse>
</House>
<?xml version="1.0" encoding="UTF-8"?>
<House>
<Warehouse>
<WarehouseId>7</WarehouseId>
<WarehouseName>
<Town>Southlake</Town>
<State>Texas</State>
</WarehouseName>
<Building>Owned</Building>
<Area>25000</Area>
<Docks>2</Docks>
<DockType>Rear load</DockType>
<WaterAccess>true</WaterAccess>
<RailAccess>N</RailAccess>
<Parking>Street</Parking>
<VClearance>10</VClearance>
</Warehouse>
<Warehouse>
<WarehouseId>8</WarehouseId>
<WarehouseName>
<Town>Bournemouth</Town>
<State>Dorset</State>
</WarehouseName>
<WarehouseName>
<Town>Shirley</Town>
<County>West Midlands</County>
</WarehouseName>
<Building>Owned</Building>
<Area>30000</Area>
<Docks>5</Docks>
<DockType>Rear load</DockType>
<WaterAccess>true</WaterAccess>
<RailAccess>N</RailAccess>
<Parking>Bay</Parking>
<VClearance>10</VClearance>
</Warehouse>
<Warehouse>
<WarehouseId>9</WarehouseId>
<WarehouseName>
<Town>Clapham</Town>
<County>London</County>
</WarehouseName>
<Building>Owned</Building>
<Area>10000</Area>
<Docks>1</Docks>
<DockType>Side load</DockType>
<WaterAccess>false</WaterAccess>
<RailAccess>N</RailAccess>
<Parking>Bay</Parking>
<VClearance>20</VClearance>
</Warehouse>
</House>And the XFilehandler package looks like this (I'm just trying to do a simple select only on WarehouseId & WaterAccess for the time being to keep things simple):
create or replace package XFileHandler as
TYPE TRECORD IS RECORD (
WID NUMBER(2)
, WACCESS VARCHAR2(5)
type TRecordTable is table of TRecord;
function getRows (p_directory in varchar2, p_filename in varchar2) return TRecordTable pipelined;
end;
create or replace package body XFileHandler is
function getRows (p_directory in varchar2, p_filename in varchar2)
return TRecordTable pipelined
is
nb_rec number := 1;
tmp_xml clob;
tmp_file clob;
rec TRecord;
begin
DBMS_LOB.CREATETEMPORARY(TMP_FILE, TRUE);
tmp_file := dbms_xslprocessor.read2clob(p_directory, p_filename);
LOOP
tmp_xml := regexp_substr(tmp_file, '<\?xml[^?]+\?>\s*<([^>]+)>.*?</\1>', 1, nb_rec, 'n');
exit when length(tmp_xml) = 0;
--dbms_output.put_line(tmp_rec);
nb_rec := nb_rec + 1;
select y.WID, y.WACCESS
into rec.WID, rec.WACCESS
from xmltable('/House' passing xmltype(tmp_xml)
columns WID NUMBER(2) PATH 'Warehouse/WarehouseId',
WACCESS VARCHAR2(5) PATH 'WaterAccess') y;
pipe row ( rec );
end loop;
dbms_lob.freetemporary(tmp_file);
return;
end;
end;Now, when I run the query:
select * from table(XFileHandler.getRows('XML_DIR', 'XFileHandler_test.xml'));I get the error: ORA-00600: internal error code, arguments: [17285], [0x5CFE8DC8], [4], [0x45ABE1C8], [], [], [], []
I had a look in the dump file for anything obvious, but nothing really stands out. Is there anything obvious in my code that I'm missing or something else which you may think could be causing this error, e.g in the regular expression regexp_substr?
Many thanks,
Shaun. -
iam not able to insert data into datagrid corresponding to the column names..as iam inserting both data and column names programatically..ie iam not able to co relate the data with the column names.plzzz help me asap
A DataGrid is row-based rather than cell-based with each row
corresponding to an item in an underlying collection (specified in the
dataProvider property). In order to add data to a DataGrid you
manipulate the underlying collection, rather than the grid directly.
Based on the limited description of your problem I would imagine you
would need to create dynamic objects with property names that correspond
to the dataFields of your dynamically created datagrid columns.
So if you had created columns with dataFields "alpha", "beta" and
"gamma" on your datagrid, you could create an item in your grid by
adding the following object to your dataProvider:
var gridItem : Object = new Object();
gridItem.alpha = "alphaValue";
gridItem.beta = "betaValue";
gridItem.gamma = "gammaValue"; -
How to insert data into a table from an xml document
using the XmlSql Utility, how do I insert data into a table from an xml document, using the sqlplus prompt.
if i use the xmlgen.insertXML(....)
requires a CLOB file, which i dont have, only the xml doc.
Cant i insert directly from the doc to the table?
the xmlgen examples I have seen first convert a table to a CLOB xmlString and then insert it into another table.
Isnt there any other way?Your question is little perplexing.
If you're using XML SQL Utility from
the commandline, just use putXML.
java OracleXML putXML
null -
Is there a way to Insert Data into a Lookup Column Type on a SharePoint List Destination in SSIS?
Greetings.
I have successfully worked out inserting SQL data (2008 R2) into my 2010 SharePoint list (New, Update, Delete) by creating an SSIS Data Flow Task as outlined here:
http://fsugeiger.blogspot.com/2010/01/synchronise-sql-table-with-sharepoint.html
However, the problem I am running into is inserting data into the SharePoint Columns that are "Lookup" column types. I verified that all of the values I am copying from SQL into the SharePoint lookup column exist in the customn list it is pointing to. It
is important to have this column be a lookup column as it links to another custom list that has many more columns of related information.
I have read and re-read the SharePoint SSIS Adapters 2011.docx from
http://sqlsrvintegrationsrv.codeplex.com/ and the only section that seems to apply is this:
"Looking Up Values in a SharePoint List
If you have to look up a value in a SharePoint list, you can use the Lookup transformation in your data flow, and use the SharePoint List source to load the lookup table. You may have to add a Derived Column transformation or a Script component that splits
data in the lookup column on the ";#" delimiter to separate the ID value from the description.
If you are replacing values in your data with the values that you look up in the list, then loading the changed data back into SharePoint, you only have to include the ID from the lookup column. SharePoint ignores the description if you include it."
I am not sure if the above statement means that I should be passing the assocaited ID's other than the actual data into the SharePoint List destination. If that is the case, that will not really work as the lookup contains hundreds of rows. Not too mention
I have several of these lookup column types pointing to several different lists.
Any guidance in how I can put data into a SharePoint Lookup column type via Data Flow Task would be so much appreaciated.
Thank you.
My errors are:
Error: 0x0 at Data Flow Task, SharePoint List Destination: Error on row ID="1": 0x1 - Unspecified error, such as too many items being updated at once (batch), or an invalid core field value.
Error: 0xC0047062 at Data Flow Task, SharePoint List Destination [1903]: Microsoft.Samples.SqlServer.SSIS.SharePointListAdapters.PipelineProcessException: Errors detected in this component - see SSIS Errors at Microsoft.Samples.SqlServer.SSIS.SharePointListAdapters.SharePointListDestination.ProcessInput(Int32
inputID, PipelineBuffer buffer) at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostProcessInput(IDTSManagedComponentWrapper100 wrapper, Int32 inputID, IDTSBuffer100 pDTSBuffer, IntPtr bufferWirePacket)
Error: 0xC0047022 at Data Flow Task, SSIS.Pipeline: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "SharePoint List Destination" (1903) failed with error code 0x80131500 while processing input "Component Input" (1912). The identified
component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and willI have found a solution to my problem and thought I would share it here in case there are others who are struggling with the above scenario. If you have a better way, I would love to hear about it since my way is a bit tedious.
In a nutshell, in order to have an SSIS package put data from an OLE DB Source into a SharePoint List Destination Lookup Column, you need to pass the ID of the value that is being looked up, not the value that is in the “master” OLE DB source.
Rough explanation, OLE DB Source value for column “Approp” is “4005” --> SQL matches “4005” with the ID in the new lookup table (“4005” = ID “5” as defined in the SharePoint lookup list) --> “5” gets passed into SharePoint List destination lookup
column --> SharePoint displays “4005” and successfully links to the lookup list.
Funny thing (not really), the error(s) outlined in my original post are not related in getting data into a SharePoint Lookup column as I am now successful in getting data into the system but I am still getting the same above error(s). I think it has to do
with the ID column in the SharePoint list destination. What I can’t seem to figure out is why since I am not linking any data to that ID column (at least on new records). I am however linking it on Update and Delete and the errors mentioned above disappear
and things work well.
There are three tasks that need to get done in order to get data from SQL into a SharePoint lookup column assuming you have already set up your SharePoint lookup lists:
1. Create new lookup table(s) in SQL that has the IDs from the SharePoint Lookup list and the values coming from the “master” OLD DB Source. You can see the ID column in SharePoint by toggling it on in a view.
2. Create a SQL command that JOINs all the databases and tables so that the ID is passed and not the value into the SharePoint lookup column
3. Change the “Data access mode” to “SQL Command” instead of the “Table or view” in the OLE DB Source and paste your command into the “SQL command text:” area.
Other helpful info is that you may also need to add additional columns in the new lookup tables in SQL for the scenarios when the data is not unique. You can see this two times in my SQL command example for Units and JobTitles:
SELECT
pps.SSNm,
pps.file_updated,
pps.Employee_id,
/* pps.CheckDistNm,*/
Check_Distribution_id = COALESCE( d.ID, 0 ),
pps.Job_nbr,
pps.SeqNm,
pps.action_eff_dt,
Fund_id = COALESCE( f.id, 0 ),
Appropriation_id = COALESCE( ap.id, 0 ),
ActionCode_id = COALESCE( ac.id, 0 ),
SpecNumber_id = COALESCE( jt.ID, 0 ),
pps.Employee_id,
/* pps.Fund,
pps.Approp,
pps.Unit,*/
Unit_id = COALESCE( u.ID, 0 ),
PosNm,
PosCode,
pps.LastName,
pps.FirstName,
pps.MI
FROM
x_PPS.aReportVw.pps_screens_active AS pps
LEFT OUTER JOIN dbo.DistributionNumbers AS d ON
pps.CheckDistNm = d.Check_Distribution
LEFT OUTER JOIN dbo.Units AS u ON
pps.Fund = u.Fund AND
pps.Approp = u.Approp AND
pps.Unit = u.Unit
LEFT OUTER JOIN dbo.Appropriations AS ap ON
pps.Approp = ap.Approp
LEFT OUTER JOIN dbo.Funds AS f ON
pps.Fund = f.Fund
LEFT OUTER JOIN dbo.ActionCodes AS ac ON
pps.ActionCode = ac.ActionCode
LEFT OUTER JOIN dbo.JobTitles AS jt ON
pps.SpecNm = jt.SpecNumber AND
pps.JurisClass = jt.JurisClass
Maybe you are looking for
-
Downloaded VM Template (EL5U3/DB 11.1.0.7/Agent 10.2.0.5/PVM) blocking
Hi: I've downloaded and installed the Oracle paravirtualized VM template for EL5U3/DB 11.1.07/Agent 1.0.2.05 to a 2.1.5 VM Server. I have used the xm create -c vm.cfg command to start up the domU. After a short period of time, an xm list shows the st
-
Greetings, I have SharePoint 2013 enterprise using ADFS for authentication. I have an issue where the first time going to a site where you do not have access and clicking the back button you're returned to the root site instead of the site you start
-
I'm trying to set up my gmail account in Mac Mail 6.1 on my MacBook pro. During set up in Mac Mail, the account keeps coming up as a POP and not IMAP account. POP is disabled on gmail settings and I'm able to set up the account as IMAP without issu
-
Hi All, I have installed infra on linux box. I am not able to start the OC4J instance using "opmnctl startproc ias-component=OC4J" Only OID and HTTP_Server are alive in opmnctl status. But I am not able to login to OID/Oracle Directory Manager as its
-
Answer: 814 content management gets ConcurrentModificationException
I wanted to get this into this news group for others to find. Solution: Open a ticket and get patch patch_CR211051_81SP4 Problem: WLP 814 using content management P13N tags or APIs. While your portal is up and users have browsed content, run the port