Cant instal 10g on Win XP with SP2
Hi,
My system configuration is
AMD Athlon 64 2800+
256MB RAM(currently 240MB, 16MB for onboard Graphics)
40GB HDD(Win XP drive has about 6GB free space)
MSI Motheroard
I have downloaded 10g_win32_db.zip file from the site and unzipped it. When I try to install it using the setup.exe file(even tried the autorun) I ended up with this message on the Command Prompt(DOS) window
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be 4.0, 5.0, 5.1 or 5.2. Actual 5.1
Passed
Checking monitor: must be configured to display at least 256 colors. Actual 4
294967296 Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from C:\DOCUME~1\Sande\LOCALS~1\T
emp\OraInstall2005-08-01_10-18-14PM. Please wait ...C:/DOCUME~1/Sande/LOCALS~1/T
emp/OraInstall2005-08-01_10-18-14PM/jre/1.4.2/lib/fonts/LucidaTypewriterBold.ttf
bad CRC 09d56211 (should be 00cf5ad1)
and then i get this pop up which says
Error in writing to directory C:\Documents and Settings\Sande\Local Settings\Temp\OraInstall2005-08-01_10-18-14PM.Please ensure that directory is writable and has atleast 45MB of disk space. Installation cannot continue.
Is this a problem of inadequate RAM or something more grave plz help me out.
Sandeep
It seems you have a basic problem with your downloaded zip-file, it could be corrupted (CRC-Error (=Current Redundancy Check), checksum error).
But, you are right, 256MB RAM is also not enough for a 10g database, you will have problems, but later on.
Similar Messages
-
Unable to install KB2264107 on 2008 Server with SP2 X86 X64
Hi All,
Is there a reason why iam unable to install KB2264107 on sever 2008 with Sp2 ?
I tried installing the patch and iam getting This update does not apply to your computer
Any troubleshooting steps for finding the fix for the same would really help me
Thanks In Advance !Hi All,
Is there a reason why iam unable to install KB2264107 on sever 2008 with Sp2 ?
I tried installing the patch and iam getting This update does not apply to your computer
Please let me know , this is really urgent
Thanks In Advance !
maybe you already have a newer version of NTDLL.DLL installed?
https://support.microsoft.com/en-us/kb/2264107
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!) -
I Cant Install CC 2014 after uninstall with creative cloud cleaner tool
I Cant Install CC 2014 after uninstall with creative cloud cleaner tool,
when i try i saw this image !
im on mac book pro 17' i7 2.4ghz 16 gb ram ATi Radeon 1gb
i tryied to back my time machine .. but still this error .. ?! wtf will it be i have to format my mac to try to reinstall all again ?EtreCheck version: 1.9.12 (48)
Report generated July 21, 2014 at 20:19:47 GMT-3
Hardware Information:
MacBook Pro (17-inch, Late 2011) (Verified)
MacBook Pro - model: MacBookPro8,3
1 2.4 GHz Intel Core i7 CPU: 4 cores
16 GB RAM
Video Information:
Intel HD Graphics 3000 - VRAM: 512 MB
Color LCD 1920 x 1200
AMD Radeon HD 6770M - VRAM: 1024 MB
System Software:
OS X 10.9.4 (13E28) - Uptime: 0 days 3:29:48
Disk Information:
TOSHIBA MK7559GSXF disk0 : (750.16 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
Mac OS X (disk0s2) / [Startup]: 749.81 GB (407 GB free)
MATSHITADVD-R UJ-8A8
USB Information:
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. FaceTime HD Camera (Built-in)
Seagate Backup+ Desk 2 TB
EFI (disk1s1) <not mounted>: 209.7 MB
disk1s2 (disk1s2) <not mounted>: 2 TB
Boot OS X (disk1s3) <not mounted>: 134.2 MB
Generic External 1 TB
EFI (disk2s1) <not mounted>: 209.7 MB
disk2s2 (disk2s2) <not mounted>: 999.86 GB
Boot OS X (disk2s3) <not mounted>: 134.2 MB
Apple Computer, Inc. IR Receiver
Thunderbolt Information:
Apple Inc. thunderbolt_bus
Configuration files:
/etc/sysctl.conf - Exists
/etc/hosts - Count: 30
Gatekeeper:
Anywhere
Kernel Extensions:
[loaded] at.obdev.nke.LittleSnitch (4050 - SDK 10.8) Support
[not loaded] com.FTDI.driver.FTDIUSBSerialDriver (2.2.18 - SDK 10.6) Support
[not loaded] com.SafeNet.driver.Sentinel (7.4.0) Support
[loaded] com.bresink.driver.BRESINKx86Monitoring (8.0) Support
[not loaded] com.paceap.kext.pacesupport.leopard (5.8 - SDK 10.4) Support
[not loaded] com.paceap.kext.pacesupport.master (5.8) Support
[not loaded] com.paceap.kext.pacesupport.panther (5.8 - SDK 10.3) Support
[loaded] com.paceap.kext.pacesupport.snowleopard (5.8 - SDK 10.6) Support
[not loaded] com.paceap.kext.pacesupport.tiger (5.8 - SDK 10.4) Support
[not loaded] com.roxio.BluRaySupport (1.1.6) Support
[not loaded] com.roxio.TDIXController (2.0) Support
[not loaded] com.sample.iokit.SNTLClassicNotSeizeDriver (7.3.0) Support
Startup Items:
PACESupport: Path: /Library/StartupItems/PACESupport
ProTec6b: Path: /Library/StartupItems/ProTec6b
Launch Daemons:
[running] at.obdev.littlesnitchd.plist Support
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.adobe.SwitchBoard.plist Support
[failed] com.apple.qmaster.qmasterd.plist
[loaded] com.barebones.authd.plist Support
[running] com.bjango.istatmenusdaemon.plist Support
[running] com.cleverfiles.cfbackd.plist Support
[loaded] com.cyberghostsrl.CyberghostPrivilegedHelper.plist Support
[loaded] com.disc-soft.DAEMONTools.PrivilegedHelper.plist Support
[loaded] com.google.keystone.daemon.plist Support
[loaded] com.macpaw.CleanMyMac2.Agent.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.noiseindustries.FxFactory.helper.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[loaded] com.oracle.java.JavaUpdateHelper.plist Support
[running] com.paceap.eden.licensed.plist Support
[loaded] PACESupport.plist Support
Launch Agents:
[running] at.obdev.LittleSnitchUIAgent.plist Support
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[running] com.bjango.istatmenusagent.plist Support
[loaded] com.divx.dms.agent.plist Support
[loaded] com.divx.update.agent.plist Support
[loaded] com.google.keystone.agent.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
User Launch Agents:
[loaded] com.adobe.AAM.Updater-1.0.plist Support
[loaded] com.BlueStacks.AppPlayer.LogRotator.plist Support
[loaded] com.BlueStacks.AppPlayer.Service.plist Support
[loaded] com.BlueStacks.AppPlayer.UninstallAgent.plist Support
[loaded] com.BlueStacks.AppPlayer.UpdaterAgent.plist Support
[loaded] com.divx.agent.postinstall.plist Support
[failed] com.facebook.videochat.[redacted].plist Support
[loaded] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist Support
[loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist Support
[loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist Support
[running] com.microsoft.LaunchAgent.SyncServicesAgent.plist Support
[running] com.prosofteng.DGMonitor.plist Support
User Login Items:
uHD-Agent
iTunesHelper
Canon IJ Network Scanner Selector EX
Android File Transfer Agent
RealPlayer Downloader Agent
Internet Plug-ins:
o1dbrowserplugin: Version: 5.4.2.18903 Support
OVSHelper: Version: 1.1 Support
Default Browser: Version: 537 - SDK 10.9
Flip4Mac WMV Plugin: Version: 3.2.0.16 - SDK 10.8 Support
DivX Plus Web Player: Version: 2.3 - SDK 10.5 Support
Silverlight: Version: 5.1.30317.0 - SDK 10.6 Support
FlashPlayer-10.6: Version: 14.0.0.145 - SDK 10.6 Support
Flash Player: Version: 14.0.0.145 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
googletalkbrowserplugin: Version: 5.4.2.18903 Support
AdobeExManCCDetect_x86_64: Version: AdobeExManCCDetect_x86_64 1.0.0.0 - SDK 10.7 Support
iPhotoPhotocast: Version: 7.0 - SDK 10.8
SharePointBrowserPlugin: Version: 14.4.3 - SDK 10.6 Support
JavaAppletPlugin: Version: Java 7 Update 65 Check version
Safari Extensions:
Buffer: Version: 2.6.0
DivX Plus Web Player HTML5 <video>: Version: 2.1.2.172
AdBlock: Version: 2.7.7
Translate: Version: 1.1
YouTube Center: Version: 2.0.1
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User iTunes Plug-ins:
Fountain Music: Version: 2.3 Support
User Internet Plug-ins:
BlueStacks Install Detector: Version: 0.3.6 - SDK 10.7 Support
RealPlayer Plugin: Version: (null) Support
Google Earth Web Plug-in: Version: 7.1 Support
npsf_uni: Version: sf 3.3.2.1 Support
npsf_cef: Version: sf 3.3.2.1 Support
3rd Party Preference Panes:
Application Enhancer Support
Flash Player Support
Flip4Mac WMV Support
Growl Support
Java Support
Tuxera NTFS Support
Time Machine:
Skip System Files: NO
Mobile backups: OFF
Auto backup: NO - Auto backup turned off
Volumes being backed up:
Mac OS X: Disk size: 698.32 GB Disk used: 319.27 GB
Destinations:
2 TB Seagate Backup Plus Drive [Local] (Last used)
Total size: 2
Total number of backups: 58
Oldest backup: 2014-03-29 12:50:27 +0000
Last backup: 2014-07-21 12:16:02 +0000
Size of backup disk: Adequate
Backup size 2 > (Disk used 319.27 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU:
9% storeagent
6% Contacts
6% WindowServer
2% iTunes
2% mds
Top Processes by Memory:
655 MB com.apple.IconServicesAgent
360 MB mds_stores
180 MB ocspd
180 MB iTunes
164 MB Contacts
Virtual Memory Information:
10.05 GB Free RAM
3.57 GB Active RAM
586 MB Inactive RAM
1.80 GB Wired RAM
808 MB Page-ins
0 B Page-outs -
Install 10g on a pc with DHCP enabled
Hi,
How to Install 10g on a pc with DHCP enabled ? I looked at Quick Installation Guide
10g Release 2 (10.2) for Microsoft Windows (32-Bit)
B14318-01
August 2005
But I found nothing.
Thanks."Oracle Content Database" is a different animal than the "Oracle Database"
There is a section Installing Oracle Database on DHCP Computers in the Oracle Database Installation Guide for Windows.
Justin -
[TV@Plus] Can't install drivers in win XP pro sp2
I can't install the drivers of that tv@nywhere plus. I tried it on different computers = same results. Tried the msi driver on web site = same results. I have the following message " The tv@nywhere WDM Driver Installation Failed ". Is it the card or what ? Sent an email to MSI = no answer. Do I have to return it and buy a better card (not from MSI)....Tried in 4 different computers....HELP ME SOMEONE !!!
I tried it on a P4 3.2 ghz, ATI Radeon 9600 128 megs, Gigabyte Motherboard (don't remember wich one), over 256 megs DDR, 160 gigs hdd. The second one was a Athlon XP 2200+, Ati Radeon 9250 128 megs, Gigabyte Motherboard GA-7VKMP, 80 gigs hdd, 512 megs DDR. The third one is a P3 866, Ati rage Pro, Intel motherboard, 384 megs SDram, 40 gigs hdd. They're all new installed win xp pro SP2 computers (after updates everywhere ex:graphic cards, windows etc...) Really confused !!! Tried in different PCI slots. Do you think it's a card or chips (physically) problem, at your advice ? I'm not at my first computer installation, and it's the first time I see this problem. I'm in computers since 6 years and never seen that before. Help me please...........
-
Installed 10g on W2K3 concurrently with 9i - cannot connect to 10g
On a Windows 2003 server running Oracle 9i, I installed the Oracle 10g database. After the installation, I'm unable to connect to 10g database but can connect fine to the 9i instance. .
At the SQL prompt, while trying to log as system/manager@STR05CI I get the following errors:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
If I connect as sysdba to start the database, I encounter the following errors:
SQL>Connected to an idle instance
SQL>startup
ORA-00119: invalid specification for system parameter LOCAL_LISTENER
ORA-00132: syntax error or unresolved network name 'LISTENER_STR05CI'
Some of the things done:
-Two ORACLE_HOMES installed
-Two different ORACLE_SID (one for 9i -D5BSM - and one for 10g - STR05CI)
-Shutdown the listener for 9i and running only the listener for 10g
-modified slqnet. ora with SQLNET.AUTHENTICATION_SERVICES= (NONE)
-All ports on 1521
Pasted below is the status of the listener:
C:\Documents and Settings\svc-ciams-dev>lsnrctl status
LSNRCTL for 32-bit Windows: Version 10.2.0.3.0 - Production on 11-APR-2008 16:20
:59
Copyright (c) 1991, 2006, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 10.2.0.3.0 - Produ
ction
Start Date 11-APR-2008 14:41:34
Uptime 0 days 1 hr. 39 min. 26 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File C:\oracle\product\10.2.0\db_1\network\admin\listener.o
ra
Listener Log File C:\oracle\product\10.2.0\db_1\network\log\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=USTO-DAPP-STR05.am.corp.amgen.com)(P
ORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=USTO-DAPP-STR05.am.corp.amgen.com)(P
ORT=8080))(Presentation=HTTP)(Session=RAW))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=USTO-DAPP-STR05.am.corp.amgen.com)(P
ORT=2100))(Presentation=FTP)(Session=RAW))
Services Summary...
Service "D5BSM" has 1 instance(s).
Instance "D5BSM", status READY, has 1 handler(s) for this service...
Service "D5BSMXDB" has 1 instance(s).
Instance "D5BSM", status READY, has 1 handler(s) for this service...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "STR05CI.AM.CORP.AMGEN.COM" has 1 instance(s).
Instance "STR05CI", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
Besides the things listed above, I've been unable to locate other instructions on how to install two different database versions on the same server.
Also, how do I resolve the 'status UNKNOWN' for the STR05CI instance so that it becomes READY?
Any help would be appreciated.
Thanks!You have an entry LOCAL_LISTENER in your spfile, that's not necessary (at least for single - non RAC - instances) as long as listener is running on port 1521. If you specify this parameter, you have to add address resolution to tnsnames.ora .
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Basically that means database is not started, it also happens when tnsnames.ora entry points to an non-existing SID.
'UNKNOWN' means there's a static entry for the instance in listener.ora, 'READY' is shown when there was a dynamic registration of the instance with the database. PMON background process does this automatically, when there's no entry in listener.ora and listener runs on port 1521.
Werner -
Cant install itunes on win 7 because of apple application support
hi guys,
well my problem is that itunes asks me to install
apple application support, but when i try to install it, error pops up and cant get it working.
I tried everything, unnistalled, updated windows, re install, paste the files from other pc, searched on google por answers but cant find a solution. Also tried to install the appleapplicationsupport.msi extracted with winrar but didnt work, same error.
The error is An error ocurred during the installation of assembly 'Microsoft.VC80.CRT,type="win32", version="8.0.50727".4053", publicKey Token="1fc8b3b9a1e18e3b" ,processorArchitecture="amd64"' .Please refer to Help and Support for more information. HRESULT: 0x8007054F
I also had an error with apple mobile device support but with registry key and folders from other computer i got it working, but cant do the same with this one.
Please help i need to use itunes on my pc.
Thanks, sorry for bad englishSee Troubleshooting issues with iTunes for Windows updates.
tt2 -
Cant install any extension for Dreamweaver with Extension Manager
I have installed dreamweaver cs6 but when i tried to install extension it says "This extension can not be installed, it requires Dreamweaver version 13 or greater.
You can only install extensions for DW CS5 with Extension Manager CS5. But this extension has declared it only supports CC or higher. So you can’t install it for DW CS5.
-
Install 10g R2 Win XP,P4,The oui.exe found a problem and need to be closed
Oracle Database 10g Release 2 10.2.0.1.0 Win32Bit
On my computer the Universal Installer that comes with the 10201_database_win32.zip Download fails at startup.
I try the the setup.exe and the oui.exe in the "install" subdirectory, but i get the same error message.
Oracle Database 10g Release 2 (10.2.0.1.0)
Enterprise/Standard Edition for Microsoft Windows (32-bit)
Oracle® Universal Installer 10g Release 2 (10.2) for Windows
System:
Microsoft Windows XP Professional Version 2002 Service Pack 2
Intel Pentium 4 CPU 3.00 GHz
2.99 GHz, 0,99 GB RAM
Firewall disabled.
No logfile is created.
Error message:
oui.exe hat ein Problem festgestellt u. muss beendet werden.
The oui.exe found a problem and need to be closed
And then I get the windows message "The oui.exe found a problem and need to be closed."
(Followed by the offer to send a report about the problem to Microsoft.)
Someone knows this problem and could help me?
Thank you
DenI got it going.
This was the 10.2 download from OTN installing to MS Windows XP SP2.
Turns out that OUI won't start if the total length of the full directory path string is too long (to setup.exe or oui.exe). Solution was to move it closer to the base directory ("\") or to rename directories to make them shorter.
Den -
Cant install commerce server 3.5 with wl 6.0sp2
When I try to install commerce server 3.5 (WLCS_with_sp1UNIX.bin) I get to the
point were it asks me for the bea home directory, which I enter as /usr/local/bea.
I then get the message "the weblogic 6.0 is required to be installed, but is not
present in the bea home directory of /usr/local/bea".
I have installed wl 6.0 sp 2, and I can get it up and running with no problem.
It is installed under /usr/local/bea/wlserver6.0.
I am running under redhat 7.0, and the environment variables are: WEBLOGIC_HOME
= /usr/local/bea/wlserver6.0
PATH=${BEA_HOME}/jdk131:${PATH}
I run the installer with the command:
sh WLCS_with_sp1UNIX.bin
Why wont this work?Hi.
Try posting this question in the commerce server newsgroup.
weblogic.developer.interest.commerce.
I don't know that much about commerce server, but maybe someone there can help out.
Regards,
Michael
mariet wrote:
We are running Commerce Server 3.5 for Weblogic 6 SP2. I tried to run installNTService.cmd
as specified in http://e-docs.bea.com/wls/docs60/adminguide/startstop.html#1026476,
but it only seem to install the weblogic application server as a Windows service
and not the commerce server. The commerce server still installed only as a Windows
application and this is what we are trying to run as a Windows 2000 service. Any
help would much appreciated.--
Michael Young
Developer Relations Engineer
BEA Support -
How to install 10g database on windows with db block size 16k
Hi,
Can somone help me install oracle 10g database on windows xp with db block size as 16k.
i need this database, because it is one of the recommendations for insalling OWB(Oracle Warehouse Builder).
Thanks,
Philip.1) In Initialization parameter pile
DB_BLOCK_SIZE=8192/16K - One way
2) The other way once you install Oracle 10 G then at the time when you are creating database with Database Configuration Assistant you can modify the block size by the[b] Initialization parameter screen.
- Sizing Tab
Block Size 8K/16K
*** Remember by default Oracle 10 G uses 8K block size.
You use the options on the Sizing tab to configure the block size of your database
and the number of processes that can connect to this database. The Block Size setting corresponds to the smallest unit of storage within the Oracle database. All storage of database objects (tables, indexes, and so on) are governed by the block size. The block size defaults to 8KB, but you can modify it. Once the database is created, you cannot modify this setting.
The maximum and minimum size of an Oracle block depends on the operating system. Generally, 8KB is sufficient for most transaction-oriented applications, and larger block sizes such as 16KB and higher are used in data warehousetype applications.
The Processes setting specifies the maximum number of simultaneous operating system processes that can be connected to this Oracle database. You must include at least six processes for each of the Oracle background processes. You can increase this number on the Initialization parameter screen. -
Need help! Cant Install the New WINXP Pro with SPK2 on it!
Please Help before I chuck this board back to where it came from...
Iam having major issues with a K8N Neo Platinum NF250g and a New WINXP Pro with SPK2 on it already.
The problem is that WINXP Pro wont get pass the setup stage after a full format.
It gets to about 45 to 56% and then the famous Blue Sceen of Death appiers with a problem saying that " If you have any new Hardware or Software installed to remove it or disalble it...
My first thourts where I havent plug somthing in right. So I go and check everything and find that theres nothing wrong. I do it again and same thing BSOD again. So me thinks maybe my graph card has it self. Put my old MSIFX5700.
boot up, quick format and samething again. So I think maybe the ram isint sitting in right. Move Geil DRR 400 512m to DIMM2 and well it didint boot up. LOL.
So I move it back and take out me Sound Blaster Live 5.1 and then trying the whole all over again. Quick Format. Now in Setup 45% Blue Screen of Death...
I have even tried swapping HD's around and still got the same resault.
So I decided to install a Coppied Version with WINXP Pro with Service PK1 on it.
It acuttuly got passed the setup and finaly booted windows.
I was starting to think that the WINXP pro I brought was stuffed. Untill I installed Doom3, StarWars BattleFront and FarCry. All of the games will with in 5mins of starting up. I get the windows saying that it has encouted an error at this adress
STOP: 0x000000A (0x408ce16c, 0x00000002, 0x00000000, 0x80818652)
This is same as what I get with the Blue Screen of Death.
The only thing that I can think of is that the AGP port is stuffed.
Please can someone help me solve this problem!!!.
System Specs:
AMD64 3000+
K8N Neo Platinum NF250g
Geil 512 DDR 400
Thermal Take 400w PSU
Sapphire 9800XT 256m
2* WDJB 120g 8m Cached
1* WD200g
Sound Blaster Live 5.1
Thermal Take : Tsunami Dream CaseSeriously - It could be as asimple as a badly recorded CD/DVD.
I have a DVD with winxp+sp2 slipstreamed, plus unattended setup + it installs all my apps, drivers and registry changes :D (http://unattended.msfn.org is a great site for this )
Anyway - I had exactly the same problem and I thought it was this motherboard and did all kinds of , formatting FAT/NTFS removing RAM blah blah blah. after about 10 failed install attempts, I re-recorded the DVD on my GF's machine (I keep the .iso as a backup!)
And boom 1st time no problems -
Why apple?? cant install Windows on My Macbook with broken descrete graphic card
hi
i have a mc723.early 2011 macbook pro with ATI radeon 6750 vga
it seems that its broken,becuase when im on heavy load or launching a game,screen goes white
apple doesnt support IRAN and there is no apple store to fix this for me
i want to install windows but becuase graphic switching doesnt work on windows,installing process uses discrete graphic and it hangss and screens goes white
why apple??
any solution guys??
im using GFX.IO to force use intel HD to stop thisits up to you which version of windows do you want to use.
just to tell you that there is a update to your version of bootcamp here Boot Camp Support Software 4.0.4033 to enable it to install windows 7
your video card may be able to play those game at a low setting -
Installing 10g on Win XP. oui.exe will not come up, get error
I downloaded 10g rel 2 from website. I used the standard unzip (Extract All...) that comes with Windows XP. It looked like it worked, but when I tried to run the setup.exe, first it said that it was an unknown publisher, and then it just produced an error report which I sent to Microsoft about oui.exe. It never got to the GUI. What did I do wrong? I have XP Pro and am logged in with admin privs.
Jun,
I don't know if you figured it out yet, but user456086 in this thread figured it out! You can look at his message, but here it is anyway:
Hi,
I have got the same error. I think this is due to installation folder pathname that contains spaces. I have just moved 'database' folder to hard disk root (eg. c:\dabase) and then run setup.exe and is works.
Have fun -
We stopped receiving event about lockout users after we installed rollup 4 for tmg with sp2
We have implemented Account Lockout Feature in TMG 2010 (http://www.ntsystems.it/post/ActiveSync-ForeFront-TMG-and-AccountLockoutThreshold.aspx). We configured
alert definition to send alert when problem occure. After we installed rollup 4 we stopped receiving event about this probloem ("The limit of consecutive logon failures has been reached...."). How can we resolve this problem? We have implented
a script which send this information automatically to user with problem. This is very important for us.
Event description:
Source: Microsoft Forefront TMG Web
Event ID: 32581
Level: Error
Text: limit for consecutive logon failures has been reached. Additional logon attempts by domain.local\user.name will be automatically rejected for the next 300 secondsHi,
Before going further troubleshooting, we should confirm if account lockout works fine now.
Please refer to the article below to check some limitations on this function.
http://blogs.technet.com/b/isablog/archive/2012/11/01/using-the-account-lockout-feature-in-tmg-2010.aspx
Is there any other different information after you install Rollup 4? Or what something else do you change during update to RU4?
Best Regards
Quan Gu
Maybe you are looking for
-
How to upload file from client to server
Can someone please help. User needs to browse file on his desktop and upload file using browse button. This file should then be uploaded to the server. I am using javascript in the front end and servlet in the back. Any help will be highly appreciate
-
I am trying to add mobile pages from my mobile site, but when I copy/paste the text boxes from the desktop version, then try to move them, Muse crashes. It also crashed when I created a new text box, added type, and tried to move that. Here is the er
-
Every time I try to open a PDF doc it automatically tries to open in Word. I have to save doc on desk top and then open it as a PDF which is very time consuming and HUGELY annoying! Can anyone help please? I have tried unloading and reloading Adob
-
Including Bank Workflow in New Hire Workflow
Hi Experts, I 've a requirement to include the bank (pay details) workflow in the new hire (HRSSA) workflow. While trying to embed the bank details process in HRSSA, I noticed that the new hire record is getting committed upon navigating out of the b
-
I have tried to restore my phone, each time im getting so far then getting error 1669. I have re-installed itunes as suggested still no joy, is there anything else i can do?