Cant install a NIVIDA driver for my NIVIDA GeForce GS Card

I was told in a seperate discussion that I could use the Windows 8 driver for this Windows 10 Technical preview.
I am running a 32 Bit copy of the preview.as this processor will not run 64 bit programs.
I have down loaded the Windows 8 32 bit copy of the NIVIDA 7300 GS driver.
I ran the install and but it said it installed but had a "!" by it in the Device Manager!
I have tried to run the install and it shows up as the Video driver in the Device manager but it states the following under the driver:
"Windows has stopped this device because it has reported problems. (Code 43)"
Can someone help me with a driver.
Not sure how to get the NIVIDA board running at over 600x800. So if anyone has any input please let me know, running at 600x800 is a bummer.

WA8FRD
Did you install the win 8 driver in compatibility mode?
To install in compatibility mode do the following:
Right click the installer>properties>compatibility>choose OS
http://windows.microsoft.com/en-US/windows-vista/Make-older-programs-run-in-this-version-of-Windows?SignedIn=1
(works in vista, win 7, win 8, and win 10)
Wanikiya and Dyami--Team Zigzag

Similar Messages

I'm having trouble instaling a printer driver for my Canon MG5220. I downloaded the latest printer driver from the Canon website (10.67.1.0) and installed it on my Intel iMac. It said the installation was sucessful, but when I try to add a printer, no go.

I'm having trouble instaling a printer driver for my Canon MG5220. I downloaded the latest printer driver from the Canon website (10.67.1.0) and installed it on my Intel iMac. It said the installation was sucessful, but when I try to add a printer, no go. The printer does'nt show up. I'm fairly new to the Mac, after switching from windows. I'm running Snow Leopard 10.6.8.

Hold down the option key and select
 ▹ System Information...
from the menu bar. In the window that opens, select
Hardware ▹ USB
from the list on the left. On the right you should now see a list of all connected USB devices, as well as some built-in components. Is the device shown?

Unable to install a software driver for Canon film scanner on mac OSX 10.6

I am unable to install a software driver for a Canon film scanner FS4000US. I have downloaded it from Canon then open the package click the install and it asks for a location namely the Applications folder. Then it says it has been installed re -start etc, but still no driver.
I am using Mac OS 10.6. Any suggestions greatly received. I have repaired/disk and permissions and it still does not work.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
Select "/var/log/install.log" from the file list. Post the messages from the last installation attempt, starting from the time when you launched the Installer or Software Update.
Post the log text, please, not a screenshot. If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

I need appleisightinstaller.exe to install the isight driver for Windows Vista running in Parallel Desktop 6 for Mac, but I don't have a Leopard DVD. What came with my Macbook Air was a flash stick "MacBook Air Software Reinstall Drive" only.

I need appleisightinstaller.exe to install the isight driver for Windows Vista running in Parallel Desktop 6 for Mac, but I don't have a Leopard DVD. What came with my Macbook Air was a flash stick "MacBook Air Software Reinstall Drive" only.

All,
A very interesting NOTE to this thread. In order to try and get the "ignore permissions" box to show up in GET INFO (so I could execute Matt the Magician's solution to file sharing issues)-- I ran the terminal command for disabling ACLs on my internal HD / start up disk (as indicated in the linked thread to BDAqua's forum).
Although I understand that this was useless for disabling permissions on the start up disk (as everyone here pointed out) and allowing me to see the "ignore permissions" check box - somehow it did seem to fix my file sharing problem...and that was the root problem I wanted solved in the first place! After doing the terminal command and a quick reboot, I went in and tested file sharing on the chosen directory and I can create new files or work from existing files in the directory, with both users being able to modify / and save from both machines and each machine sees the revisions and can build from them. Bottom line - I'm stoked and want to thank everyone for their help.
The only other tweak I made was going over to my wife's machine and instead of using her log in / password, I just used my name and password to connect to my main machine that was sharing directories. Maybe that's what fixed the problem or the ACL disable but either way...I'm up and running the way I want to be.
Hope this thread helps anyone else who has these file sharing / permissions issues with Leopard. Especially for anyone wanting to do such a simple file sharing set up between 2 computers. I wish I understood exactly which tweak fixed the problem, but at least it works the way I want now.
So happy to be done w/this one!
Thx everyone. Any additional input on what solved it is welcome, so my curiosity is quelled...
TC

Can't install win7 scanner driver for canon pixma mp260, help please !!!

can't install win7 scanner driver for canon pixma mp260, help please !!!

HOW CAN I FIX MY PIXMA CANON WITH OUT THE CD

Driver for CT4660 digital I/O card - with Soundblaster Live SB0

Hi - I searched the Knowledge Base here and the Support Driver section of the Creative Labs website and nowhere can I find a driver for the Digital I/O card CT4660. I have a Soundblaster Li've SB000 and the digital I/O card together with the connector cable. Can anyone help me out or point me in the right direction? Googled the web too, but just found one other message of someone looking for the same thing with no replies posted to that thread.
Thanks and happy New Year.
Mike

ort 0) configured for buffered output. Intermittently the following error appears, "An exception 0E has occurred at address in VxD NIPALK (01) + address. This was called from address in VxD NIPALK (01) + address. It may be possible to continue normally.I've never seen this error before, but there is a newer version of the NI-DAQ driver (6.9) available for download from the NI website at:
http://digital.ni.com/softlib.nsf/current

Where can i get a unix driver for a Trident VGA9000 video card online?

where can i get a unix driver for a Trident VGA9000 video card online?

http://www.driverguide.com/archives/archive5/905.html

Dos Driver for ni pci-485 interface card

Can any one give details about availablity of Dos driver for NI PCI-485 Interface Card.
Thanks

The PCI-485 uses standard 16550 UARTs, and while there isn't a packaged DOS driver avilable, you should be able to use the card in DOS applications by configuring the software to use the base address assigned to the UART that you wish to use. One important note is the RS-485 wire modes which are configured via the scratch register. The user manual documents how this is performed.

How to install W7 Promise driver for K9A2 Platinum

First of all i assume no responsability for any loss of data ,everything described here is done on your own risk.BACK-UP data before doing this.
Any K9A2 Platinum v1 user was disapointed when looking on the product page seeing no W7 driver.As a MSI tech recommended a driver from Promise i said to myself to try it and of course , it did not installed the normal way.You could force it tru HAve Disk from within Windows 7 only when running form the SB 600 .Also Windows updates installs an update for the cip.
The procedure is simple ,practically you only need to edit one or 2 INF files depending on the W7 version.
FTTX4650-2650 controllers are both compatible with Windows 7 as the Microsoft website shows.
Download driver from Promise website the driver for FTTX4650-2650 Win7 Win2008R2 WHQL V 1.3.0.4 -> file name FTTX4650-2650_Win7_Win2008R2_WHQL_V_1.3.0.4
Unzip the archive and navigate to the i386 or/and amd64 folders locate <FTT3s.inf> file/s ,open with Notepad.For the .inf extension to be visible go to File & Folder Options and enable extensions to be visible.
Under the [Promise] section add the folowing lines ,this ID s were harvested from within Windows 7 Promise properties ,when no driver was installed
%FastTrak PDC42819_Desc%=Napa_Inst,PCI\VEN_105A&DEV_3F20&SUBSYS_37161462&REV_00
%FastTrak PDC42819_Desc%=Napa_Inst,PCI\VEN_105A&DEV_3F20&SUBSYS_37161462
%FastTrak PDC42819_Desc%=Napa_Inst,PCI\VEN_105A&DEV_3F20&CC_010400
%FastTrak PDC42819_Desc%=Napa_Inst,PCI\VEN_105A&DEV_3F20&CC_0104
After the copy/paste that [Promise] section will look like this
[Promise]
%SATA_TX2650_Desc%=Napa_Inst,PCI\VEN_105A&DEV_3F19&SUBSYS_3F29105A
%SATA_TX4650_Desc%=Napa_Inst,PCI\VEN_105A&DEV_3F19&SUBSYS_3F2A105A
%SATA_TX4652_Desc%=Napa_Inst,PCI\VEN_105A&DEV_3F19&SUBSYS_3F2B105A
%FastTrak TX2650_Desc%=Napa_Inst,PCI\VEN_105A&DEV_3F20&SUBSYS_3F21105A
%FastTrak TX4650_Desc%=Napa_Inst,PCI\VEN_105A&DEV_3F20&SUBSYS_3F22105A
%FastTrak PDC42819_Desc%=Napa_Inst,PCI\VEN_105A&DEV_3F20&SUBSYS_3716105A
%FastTrak TX4652_Desc%=Napa_Inst,PCI\VEN_105A&DEV_3F20&SUBSYS_3F24105A
%FastTrak T2_Desc%=Napa_Inst,PCI\VEN_105A&DEV_377d&SUBSYS_3772105A
%FastTrak PDC42819_Desc%=Napa_Inst,PCI\VEN_105A&DEV_3F20&SUBSYS_37161462&REV_00
%FastTrak PDC42819_Desc%=Napa_Inst,PCI\VEN_105A&DEV_3F20&SUBSYS_37161462
%FastTrak PDC42819_Desc%=Napa_Inst,PCI\VEN_105A&DEV_3F20&CC_010400
%FastTrak PDC42819_Desc%=Napa_Inst,PCI\VEN_105A&DEV_3F20&CC_0104
%Promise_Raid_ControllerDesc%=NODRV,SCSI\ProcessorPromise_
If it looks like this save the file.
Go and Install it.
A warning message for the driver will appear as with any beta or unsigned driver ,ignore it.
When in W7 update the Promise as offered by Windows update.
I will not be held resposable for any damage or data loss.You are doing this on your own risk.Back-up your data and test the driver for yourselves before long term usage.
If it works for you post feedback.

Quote from: wlahdone on 21-February-11, 21:51:07
First of all i assume no responsability for any loss of data ,everything described here is done on your own risk.BACK-UP data before doing this.
Any K9A2 Platinum v1 user was disapointed when looking on the product page seeing no W7 driver.As a MSI tech recommended a driver from Promise i said to myself to try it and of course , it did not installed the normal way.You could force it tru HAve Disk from within Windows 7 only when running form the SB 600 .Also Windows updates installs an update for the cip.
The procedure is simple ,practically you only need to edit one or 2 INF files depending on the W7 version.
FTTX4650-2650 controllers are both compatible with Windows 7 as the Microsoft website shows.
Download driver from Promise website the driver for FTTX4650-2650 Win7 Win2008R2 WHQL V 1.3.0.4 -> file name FTTX4650-2650_Win7_Win2008R2_WHQL_V_1.3.0.4
Unzip the archive and navigate to the i386 or/and amd64 folders locate <FTT3s.inf> file/s ,open with Notepad.For the .inf extension to be visible go to File & Folder Options and enable extensions to be visible.
Under the [Promise] section add the folowing lines ,this ID s were harvested from within Windows 7 Promise properties ,when no driver was installed
%FastTrak PDC42819_Desc%=Napa_Inst,PCI\VEN_105A&DEV_3F20&SUBSYS_37161462&REV_00
%FastTrak PDC42819_Desc%=Napa_Inst,PCI\VEN_105A&DEV_3F20&SUBSYS_37161462
%FastTrak PDC42819_Desc%=Napa_Inst,PCI\VEN_105A&DEV_3F20&CC_010400
%FastTrak PDC42819_Desc%=Napa_Inst,PCI\VEN_105A&DEV_3F20&CC_0104
After the copy/paste that [Promise] section will look like this
[Promise]
%SATA_TX2650_Desc%=Napa_Inst,PCI\VEN_105A&DEV_3F19&SUBSYS_3F29105A
%SATA_TX4650_Desc%=Napa_Inst,PCI\VEN_105A&DEV_3F19&SUBSYS_3F2A105A
%SATA_TX4652_Desc%=Napa_Inst,PCI\VEN_105A&DEV_3F19&SUBSYS_3F2B105A
%FastTrak TX2650_Desc%=Napa_Inst,PCI\VEN_105A&DEV_3F20&SUBSYS_3F21105A
%FastTrak TX4650_Desc%=Napa_Inst,PCI\VEN_105A&DEV_3F20&SUBSYS_3F22105A
%FastTrak PDC42819_Desc%=Napa_Inst,PCI\VEN_105A&DEV_3F20&SUBSYS_3716105A
%FastTrak TX4652_Desc%=Napa_Inst,PCI\VEN_105A&DEV_3F20&SUBSYS_3F24105A
%FastTrak T2_Desc%=Napa_Inst,PCI\VEN_105A&DEV_377d&SUBSYS_3772105A
%FastTrak PDC42819_Desc%=Napa_Inst,PCI\VEN_105A&DEV_3F20&SUBSYS_37161462&REV_00
%FastTrak PDC42819_Desc%=Napa_Inst,PCI\VEN_105A&DEV_3F20&SUBSYS_37161462
%FastTrak PDC42819_Desc%=Napa_Inst,PCI\VEN_105A&DEV_3F20&CC_010400
%FastTrak PDC42819_Desc%=Napa_Inst,PCI\VEN_105A&DEV_3F20&CC_0104
%Promise_Raid_ControllerDesc%=NODRV,SCSI\ProcessorPromise_
If it looks like this save the file.
Go and Install it.
A warning message for the driver will appear as with any beta or unsigned driver ,ignore it.
When in W7 update the Promise as offered by Windows update.
I will not be held resposable for any damage or data loss.You are doing this on your own risk.Back-up your data and test the driver for yourselves before long term usage.
If it works for you post feedback.
I made the changes specified above. How do I install the driver ?

Cannot install latest display driver for Vista 32-bit Equium A200

Hi all,
I am trying to update my display driver to the latest revision posted for my model laptop on the Toshiba site but on running the setup exe Im returned with an error stating my system is not compatible with driver ver 7.14.10.1461.
In info clearly states it compatible with an A200 (PSAE2).
Anyone had a similar problem.

Hi!
On the Toshiba website I have founded only Intel display driver for your A200 PSAE2 so I think you have an Intel graphic card.
Well, I had this problem too and the solution is pretty easy: Go to the device manager => right click on graphic card => Update driver.
Now you can install the driver without problems.
Bye

How do I install the jdbc driver for sql server 2005, in sql developer 4.0 ?

Hallo together
I need access to tables in a MS SQL Server 2005 database.
One possibility is the JDBC driver.
How do i install this driver ?
Thank you very much for your postings.

Hi,
This is from the documentation -
Database: Third Party JDBC Drivers
The Third Party JDBC Drivers pane specifies drivers to be used for connections to third-party (non-Oracle) databases, such as IBM DB2, MySQL, Microsoft SQL Server, or Sybase Adaptive Server. (You do not need to add a driver for connections to Microsoft Access databases.) To add a driver, click Add Entry and select the path for the driver:
For Microsoft SQL Server or Sybase Adaptive Server: jtds-1.2.jar, which is included in the jtds-1.2-dist.zip download
To find a specific third-party JDBC driver, see the appropriate website (for example, http://www.mysql.com for the MySQL Connector/J JDBC driver for MySQL, http://jtds.sourceforge.net/ for the jTDS driver for Microsoft SQL Server and Sybase Adaptive Server, or search at http://www.teradata.com/ for the JDBC driver for Teradata). For MySQL, use the MySQL 5.0 driver, not 5.1 or later, with SQL Developer release 1.5.
You must specify a third-party JDBC driver or install a driver using the Check for Updates feature before you can create a database connection to a third-party database of that associated type. (See the tabs for creating connections to third-party databases in the Create/Edit/Select Database Connection dialog box.)
Alternative:
As an alternative to using this preference, you can click Help, then Check for Updates to install the JTDS JDBC Driver for Microsoft SQL Server and the MySQL JDBE Driver as extensions.
Regards,
Mike

How do i install the newest driver for audigy 2 z

i downloaded the newest driver and tryed to install it. it says "setup did not detect the set of required compents you have. setup wil now exit" what do i need to install the latest and greatest dri've other than the card itself?

I had the exact same problem updating the drivers for my Audigy 2 Platinum EX, but I think I managed to solve the problem. This was quite awhile ago, but I think I remember how I got it to work.
First of all, which update did you download? The "Digital Rights Management" driver update was the one giving me that problem, and this was after installing the main drivers and programs from my Audigy 2 CD. But, I think the reason why it gives this message is because you need to install one of the other driver updates first, then install this DRM update. Look under the driver details and it says the following:
"<EM>Requirements</EM>:
Microsoft? Windows? XP Service Pack 2 or Windows 2000 Service Pack 4 </LI>
Creative Sound Blaster Audigy 2 or Audigy 2 ZS series internal audio device </LI>
<EM>EAX 4.0 ADVANCED HD Driver Patch Update for Sound Blaster Audigy 2 and Audigy 2 ZS (released on 29 March, 2004) installed, or Sound Blaster Audigy 2 and Audigy 2 ZS Driver Update (released on 29 July, 2004) installed</EM>."</LI>
Strangely enough, it appears this update requires you install an older driver update first (EAX4DRV_AUDIGY2__84_50.exe) then afterwards try running the Digital Rights Management update.
I think this is right, but I'm not 00% sure.

Lost-how do you install x-fi driver for arch 32bit

k, i have tried installing the linux x-fi driver for my sound card... but im sorta having trouble installing the driver.
i sorta find the instructions arch wiki to install the driver confusing... how do you install it? im really lost, and im very new to linux.... but i do got computer smarts...

The wiki page (http://wiki.archlinux.org/index.php/HCL/Sound_Cards) doesn't cover installing drivers for creative soundcards as such. They should be installed automatically. However it doesn't mention the x-fi at all. I am not sure what the procedure is for your card. Are you sure it hasn't been autodetected? Also you should read this article if you haven't already. (http://wiki.archlinux.org/index.php/ALSA)

SQLDeveloper 3.1 EA3 -- error installing JTDS JDBC Driver for Microsoft SQL

After installing sqldeveloper64-3.1.06.82-no-jre.zip I get an error when trying to add the "JTDS JDBC Driver for Microsoft SQL Server" extension.
The error returned is an invalid URL.
The URL is http://download-llnw.oracle.com/otn-pub/sqldeveloper/oracle.sqldeveloper.thirdparty.drivers.sqlserver.58.17.zip

Hi Chris,
A bug was logged for this a few days ago:
Bug 13547400 - CHECK UPDATES FAILS DUE TO SERVER RETURNED HTTP RESPONSE CODE: 400
This is similar to another bug which has already been fixed (not a product bug, just a bad URL in an OTN web page):
Bug 13530787 - 3.1 EA2: FORUM: CHECK FOR UPDATE HAS BAD URL FOR CVS
3.1EA2 Sqldeveloper Updates Fail to install
So I imagine yours will get fixed soon.
Regards,
Gary
SQL Developer Team

How install the LAN driver for Satellite Pro A120

Actually, my problem is that i didnt know how to install the lan driver on my Satellite Pro A120 to connect throug the net.
The issue that theres no installation to do to complete the install.
And theres other issue that i need the Ethernet Controller
My laptop was vista OS installed, But i change it and put Windows XP instead
Plz help me

Thats very easy to install the LAN driver.
On the Toshiba website you can search for it:
http://eu.computers.toshiba-europe.com => Support & Downloads => Download drivers
Select the right notebook. In your case its the Satellite Pro => Satellite Pro A Series => Satellite Pro A120.
And then choose at operating system Windows XP and at Driver type LAN Driver.
Click on search and you will get the right driver.
Download and install it. How this works did Jimi said.

Cant install a NIVIDA driver for my NIVIDA GeForce GS Card

Similar Messages

Maybe you are looking for