Cant install any extension for Dreamweaver with Extension Manager
I have installed dreamweaver cs6 but when i tried to install extension it says "This extension can not be installed, it requires Dreamweaver version 13 or greater.
You can only install extensions for DW CS5 with Extension Manager CS5. But this extension has declared it only supports CC or higher. So you can’t install it for DW CS5.
Similar Messages
-
Cant install any driver for Hp NVidia gt230 on Touchsmart 600-1055
Last few years I bought a HP Touchsmart oversea when I travelled to US then I brought it back to Australia. First couple months it was fine then one day I turned on the PC then It is just black screen after the window 7 boot screen then restart after few seconds. It keeps repeating that process unless I go to Safe mode and remove its NVidia driver and replace with window standard driver ( Video Controller VGA compatible) then I can boot up the window normally but cant use any program that require the delicated graphic card. I have tried hard to find its driver from every resources that I can find on the internet including Hp website and NVidia webiste but still again no luck. for 3 years I still cant find the driver for this that can make it working. What happened? is it my graphic card physically fault or because the software isusse? I forgot to mention that I even try to use the DVDs that I orders from HP USA and try to factory recovery but it is still having the same issue. I try to install many different version of window in cluding win 7 32&64 bits, Window 8 pro 64 bits then STILL NO LUCK. So could anyone please tell me what happened and how to fix it cause as I am aware that HP australia not support for HP USA product and I dont want to see my expensive desktop become a brick.
ThanksHello Trung_Hau_Le,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that you are having issues where you cannot use the higher end graphics card installed in your HP TouchSmart 600-1055 Desktop PC. The issue you are describing appears to be a physical issue and I think it would be best if you contacted HP technical support for repair options.
US support link to contact options for HP products purchased in the US.
Outside of US support link to contact options for HP products purchased outside the US.
Now just because you purchased the computer in Australia does not mean your warranty is not good in the US. I am providing you with a link to theHP Global Warranty and FAQs, which states the following:
HP Global Warranty covers HP products at the level of standard warranty offered in the country in which it is used. For example, a product purchased in country "A" and moved to country "B" receives the current warranty coverage provided by country "B" (if that product is marketed or supported in country B)
This means that your computer receives the same treatment in the US as a computer sold in the US. I would recommend you contact HP Technical Support to have your issue addressed.
I would like to thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter -
Extensions For Dreamweaver 8 and CFMX 7
Just upgraded from ColdFusion 5 to ColdFusion MX 7. Have been
using Studio 8 with of course, Dreamweaver 8, for the last 7
months.
The CF7 MX upgrade package comes with an 18 meg .MXP file,
entitled: CF7 Extensions For Dreamweaver MX. Should I install this
in my Dreamweaver 8 Extensions? Or does DW 8 already come with
most, or ALL of these? In other words, are they only designed for
DW MX? Is there anything at all to be gained by installing these
extensions, or perhaps something to get "messed up", like an
existing extension being overwritten by an older one in the 18 meg
upgrade file?
Also, most of the extensions seem to be for that Enterakt
product, which doesn't support SQL Server or Oracle, right? Which
is what I use.
Or should I just ignore this 18 meg file? Or just go ahead
and install it? Appreciate any help/advice. Thank you.
GaryThe CF7 extensions were designed to add extra capabilities to
DWMX. They
were built into DW8.
Paul Whitham
Certified Dreamweaver MX2004 Professional
Adobe Community Expert - Dreamweaver
Valleybiz Internet Design
www.valleybiz.net
"Gary1" <[email protected]> wrote in message
news:edhbat$npe$[email protected]..
> Just upgraded from ColdFusion 5 to ColdFusion MX 7. Have
been using
> Studio 8
> with of course, Dreamweaver 8, for the last 7 months.
>
> The CF7 MX upgrade package comes with an 18 meg .MXP
file, entitled: CF7
> Extensions For Dreamweaver MX. Should I install this in
my Dreamweaver 8
> Extensions? Or does DW 8 already come with most, or ALL
of these? In
> other
> words, are they only designed for DW MX? Is there
anything at all to be
> gained
> by installing these extensions, or perhaps something to
get "messed up",
> like
> an existing extension being overwritten by an older one
in the 18 meg
> upgrade
> file?
>
> Also, most of the extensions seem to be for that
Enterakt product, which
> doesn't support SQL Server or Oracle, right? Which is
what I use.
>
> Or should I just ignore this 18 meg file? Or just go
ahead and install
> it?
> Appreciate any help/advice. Thank you.
>
> Gary
> -
All AIR extensions for dreamweaver lead to nowhere.
A few weeks ago I installed a new copy of cs5 web pro and went to download the air extension for dreamweaver. I have found several links but it appears that someone running the adobe site had decided to redirect any URL with AIR in it to the new air developer site. unfortunatly there is no place on that site that links to the mxp file for the adobe air extension for dreamweaver... Can someone fix it so we developers that have paid BIG bucks for this product can download the extension? its pretty poor management to break a link in a product to a website. You guys should have a set of LINKs that ar on a NO TOUCH lis for your web host management team.
After rigourous searching myself, i found the direct link: http://fpdownload.macromedia.com/get/air/extensions/dreamweaver/Adobe_ AIR.mxp
Cheers! -
Adobe AIR 1.5.2 Extension for Dreamweaver CS3
I downloaded what I thought to be the updated version of Adobe AIR Extension for Dreamweaver CS3 for the new AIR 1.5.2 release, but it looks like the extension (Adobe_AIR_CS3.mxp) is still the 2008 version (exactly the same file size, and Dreamweaver overwrites the version number I manually input ("1.5.2") in the Adobe AIR configuration file with "1.5".
Attention Dreamweaver and Adobe AIR teams: when will the extension be updated for AIR version 1.5.2?
Thanks!Hum... did u set the Window to transparent???
I don't use Flex, I use flash... here is my code...
In AIR:
//create the init options
var options:NativeWindowInitOptions = new NativeWindowInitOptions();
options.transparent = true; // set to transparent true
options.systemChrome = NativeWindowSystemChrome.NONE;
options.type = NativeWindowType.NORMAL;
//create the window
var newWindow:NativeWindow = new NativeWindow(options);
newWindow.title = "A title";
newWindow.width = 600;
newWindow.height = 400;
newWindow.stage.align = StageAlign.TOP_LEFT;
newWindow.stage.scaleMode = StageScaleMode.NO_SCALE;
// create html loader that will contain the SWF.
var ld:HTMLLoader = new HTMLLoader();
ld.width = newWindow.width;
ld.height = newWindow.height;
newWindow.stage.addChild(ld);
//activate and show the new window
newWindow.activate();
// Load the html file... Case1.html
ld.load(new URLRequest("Case1.html"));
CASE 1.HTML CONTENT
<html>
<body>
<embed src="Case1.swf" quality="high" bgcolor="#ffffff" width="550" wmode="transparent"
height="400" name="Case1" align="middle" allowScriptAccess="sameDomain" allowFullScreen="false"
type="application/x-shockwave-flash" pluginspage="http://www.adobe.com/go/getflashplayer" />
</body>
</html>
I see nothing... Any ideas??? do I need to update my flash plugin ? -
Yahoo Merchant Solutions Extension for Dreamweaver MX 2004 Trial Version
I have a licensed version of Dreamweaver MX 2004 at home, as
well as the downloaded extension for Yahoo Merchant Solutions that
enables me to add the shopping cart. However, I am currently
working offsite and needed to download a trial version of
Dreamweaver to work on my pages while I was not in my office. After
installing the trial version, I tried downloading the Merchant
Solutions extension. This extension downloads and installs
simultaneously and requires Dreamweaver to be closed when
performing this action. However, when trying to install, it kept
coming up with a runtime error whenever attempting to start
Dreamweaver. This is due to the pop-up trial box that appears every
time Dreamweaver is launched, thus preventing the installation of
the extension. Since the full version is available for the 30-day
trial, isn't there some way of bypassing the stupid box that keeps
popping up everytime so extensions can be installed?
Also, is there a reliable extension for autosave? I stepped
away from my desk for about five minutes and found a Windows update
had occurred before I had a chance to save everything I did in
Dreamweaver.
Thanks.Phil,
I believe that the Yahoo Merchant Solutions Extension for
Dreamweaver
does not work on DW8, but maybe it has been updated recently.
Take a look at this TechNote regarding installing the 8.0.2
updater:
http://www.adobe.com/go/785362aa
HTH,
Randy
> I am having trouble opening two files that I have
downloaded for Dreamweaver 8.
> One is the Dreamweaver 8.0.2 updater. The other is the
Yahoo Merchant
> Solutions Extension for Dreamweaver. I can download the
files to my harddrive,
> but I cannot open them I am using a Windows XP SP2
operating system.
>
> I use a Windows XP SP2 laptop as a back-up computer, and
on this laptop, I
> have had no problem downloading and installing both of
these Dreamweaver files.
>
> Sooooooo, there seems to be a problem with my desktop
computer. I have tried
> turning off all antivirus and antispyware and firewalls
when doing the
> download, but that does not help. It is worth noting
that I am having no
> problems downloading updates for other software programs
on my computer, so the
> problem is somehow Dreamweaver specific.
>
> Can anyone be of help with this problem? -
Hi
As my topic says
How do you create an installer/bundle for PPro with extension, a plugin (export-controller) and some custom presets?
Assume you have Flash Builder 4.5, CS Extension builder 2.0, Xcode 4.5.1 running under MacOS 10.8.I understand why you need updated running headers in your book. To a sighted reader these serve as a guide to where you are and help you find things quickly. In addition, if you are exporting your data to XML or HTML from the tagged PDF it would also be important to have these in the proper location.
But for accessibility purposes, it doesn't have to be there because the screen reader reads everything in linear order, line by line. No one is looking at the page. A user listening to the screen reader read the page is going to hear this heading, just before the actual word itself. So they will hear the first word on the page twice. It's not the end of the world if it's there, but such headings are not necessary for accessibility unless they are not repetitive and contain information that is not otherwise available.
So I would say, fine if you need them or want them there, it's just one word.
I think you should try exporting your book to PDF (or even just a chapter of the book) and look at the tags panel in Acrobat to see if you are getting the result you want. I can't tell you exactly what you should do to get those results, you are using a plug-in I don't have.
I can tell you I didn't have to add the headers to any article at all, they just automatically export if the other articles in the file are added and you don't select the header style option "not for export as XML."
You may not experience the same results with your plug-in, but I think it will probably work the same way.
Give it a try and best of luck. -
How do I get ColdFusion 10 extensions for Dreamweaver CS6?
I can't find the ColdFusion 10 tags extension for Dreamweaver CS6 on Adobe's update website. I replaced my computer and would like to install them on my new computer. Do they still exist? If so, where do I go to download them?
Thanks for your help.DW has dropped support for CF.
But see if this discussion helps.
Dreamweaver CC Coldfusion 10 extension?
Nancy O. -
Where can I get the Adobe AIR extension for Dreamweaver CS5.5 ??
I am either going insane or all the links I can find are broken.
http://www.adobe.com/products/air/tools/ajax/ redirects to http://www.adobe.com/devnet/air.html, which has no apparent download link.
Any help most welcome.I have been looking for the past couple of weeks. Some dweeb at adobe decided to redirect all URLs that had "air" in them to the stupid dev site that of course has no information on it about dreamweaver (except to buy it). It would be logical to put something big on the right side that says "if you got here to download the adobe air extension for dreamweaver it has been moved to here..... I guess nobody is monitoring the thousands of redirects from the air/tools/ajax and might say.. hey I should fix that.....
-
Is there a way to develop an HTML based extension for Dreamweaver like ones for PS or AI?
Is there a way to develop an HTML based extension for Dreamweaver like ones for PS or AI? I mean like extension produced by Extesion Builder 3.
Snippets is a good idea. But you can also do this with a template. Each time you use FILE | New > Page from Template, as you would to create a new child page, you have the option to enable or disable an option called "Update page when template changes". If that option is DISABLED (i.e., unchecked), then the child page will be created but with NO TEMPLATE MARKUP (i.e., no editable/non-editable regions)! Seems that's exactly what you want, no?
-
Has anyone seen a designer's caluculator extension for dreamweaver to measure elements margins' and paddings' in a cascade?
Another option is to also use Firebug for FF:
http://getfirebug.com/
and/or Developers Toolbar for IE:
http://www.microsoft.com/en-us/download/details.aspx?id=18359
These are not DW based but still can provide a good look (visually as well as css rules) at the various elements on the page and in a sort of cascading view... showing the base css, any overriding rules, etc all the way down into the nested elements.
I use both because sometimes the two browser render things slightly different.
Best wishes,
Adninjastrator -
Tutorial or instruction s on how to create an extension for dreamweaver
Can some body please point me to a tutorial or instructions on how to create an extension for dreamweaver
I used to create extension for flash few years ago. It was quite straight forward, but not for dreamweaver any help will be appreciated.Take a look at:
Extending Dreamweaver Help - http://help.adobe.com/en_US/Dreamweaver/10.0_Extending/
API Documentation - http://help.adobe.com/en_US/Dreamweaver/10.0_API_Ref/index.html -
Paypal Extension for Dreamweaver CS3
I am trying to get the free Paypal extension for Dreamweaver CS3 but can't find it anywhere. Web Assist currently only has the extension available for CS4 and above.
I've searched Google but every link that says I can get the extension for CS3 just goes back to Web Assists page with the newer version which does not support CS3.
Does anyone know where I could get the Paypal extension for Dreamweaver CS3?I don't know why you need an extension for this. PayPal gives you the necessary code to use. It's a simple matter of copy & paste.
https://www.paypal.com/cgi-bin/webscr?cmd=_singleitem-intro-outside
https://www.paypal.com/us/cgi-bin/webscr?cmd=_pdn_xclick_techview_outside
Nancy O. -
Extension for dreamweaver cs5.5
I seek extensions for dreamweaver 5.5
Hi bozosky14,
Welcome to Adobe Forums. See https://www.adobe.com/cfusion/exchange/index.cfm?event=productHome&exc=3 for DW extensions.
Thanks,
Preran -
Adobe AIR extension for Dreamweaver
I am unble to get the .mxp extension file in the path (Download the Adobe AIR Extension for Dreamweaver here: http://www.adobe.com/products/air/tools/ajax/) that mensioned in Adobe Community Help.
How can I get the .mxp file...??Thanks very much playframe. Excellent sleuthing.
How stupid of Adobe to direct you to a website (http://www.adobe.com/products/air/tools/ajax/) that has no download. And since when did anything exist on Macromedia.com anymore? Does anyone even remember that company anymore
Maybe you are looking for
-
The itemRenderer CheckBox of Datagrid displays incorrect sometime.
The itemRenderer CheckBox of Datagrid displays incorrect sometime. A datagrid has a column: <mx:DataGridColumn headerText="selectMe" editable="true" dataField="_selected" itemRenderer="{new ClassFactory(mx.controls.CheckBox)}" rendererIsEditor="true"
-
Static / Bad Connection for External Bose Speakers?
Hello Everyone; I recently bought a new 24" iMac and bought a set of Bose Companion speakers to go with it. I've plugged them into the headphones jack using the cable provided by Bose, but my sound quality is really bad. Theres a lot of static in the
-
How can i see partial payment document is related to particular invoice.
Hi Experts, I posted one invoice of Rs.100000 and made partial payments of Rs.50000 for that invoice, In fbl5n these two entries are in open item status, how can i know that this partial payment is related to this invoice, because there may be n nu
-
Using taskFlow in auto generated human task
Hi, I have auto-generated ADF human task which have simple payload with InvoiceId attribute. In worklist app I see this attribute and in page source there is an input text with value set to #{bindings.InvoiceId.inputValue}. I would like to add my cus
-
MAC can't find HP Photosmart 7510 wirelessly
I cannot make my HP Photosmart 7510 link to my Mac which runs on 10.8.3. I have downloaded the software from the link below: http://ftp.hp.com/pub/softlib/software12/COL44228/mp-107205-1/HP_Mountain_Lion_Ink_SW_v12.23.38.dmg I have connected the 2 by