Cant install JDK on Windows 2000

Ive tried installing both 1.4 and 1.3..... Anyway whenver i try to run the installer i get the message "Cant run 16-bit windows program" Any ideas? I cant seem to find anything on the subject and the one site i did suggested that certain dll's be present on the system which where all there?
thx

The problem here is that Sun is distributing a 32-bit only
program with a 16-bit installation software. They use
Installshield for the installation. They forgot to check
off 32-bit runtime when packaging the installation software.
For whatever reason, the 16-bit subsystem in Windows is
disabled and the 16-bit installation software can't run.
Look at Microsoft's knowledgebase article
Q196453 "Troubleshooting NTVDM and WOW Startup Errors".
http://support.microsoft.com/default.aspx?scid=kb;EN-
US;Q196453
Also, go to Installshield's website and look at
knowledgebase article Q101254 and Q103299 for more
information.
http://support.installshield.com/kb/kbresults.asp?
pm=All&txtkeyword=16-
bit+subsystem&sm=all+words&txtarticleid=&gv=1&acat=both&sa=c
ontent&days=0&submit.x=0&submit.y=0

Similar Messages

Problem Installing 817 on Windows 2000 with RAID Array

I am having a problem installing Oracle under windows 2000 which has 2 x 60 GB discs configured in RAID array. When I run the setup program the cursor goes busy for about 10 seconds and returns back to normal and nothing happens !. No errors nothing.
However when I run the Object Manager in the ods_preinstall directory it starts but in the log file I get the following error message:-
02/14/02 09:46:18 : (892) : Error in IO Control call for disk PhysicalDrive0 (Error 21)
02/14/02 09:46:19 : (892) : The count = 28
02/14/02 09:46:19 : (892) : The signature is 0x443aa035
02/14/02 09:46:19 : (892) : Error: First Partition of the disk must be an extended disk
02/14/02 09:46:19 : (892) : Found the partition: 7
Any idea whats happening....? Has anyone seen this before. Do I need to do something special in teh RAID..?
TIA
Martin

Here are some possible solutions:
1. The installation notes state that you must be logged on as Administrator to be able to install 9i. Are you logged on as the Administrator? Being logged on as user01 with Administrator priviledges isn't the same as Administrator.
2. Is the disk full? If I remember my installation correctly, I needed 3 times the size of the files. The documentation will tell you how much space you need.
Hope these two questions help
Regards,
Michael

HT1926 cant install itunes on windows 7 64bit . cant run a required dll

i cant install itunes on windows 7 64bit . when i run the setup and reach the status : "performing installation checks" , it said "there is a problem with this Windows Installer Package . A Dll required for this install to complete could not be run.v..v" what should i do now ?

That's a bit rarer. It's a 1723 error message. (1721 and 1722 are more common.)
Even though the following user tip is about slightly different errors (the 1721 and 1722), perhaps try it with your one too:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

How to install Oracle7 on Windows 2000 Pro??

Hello all,
I got the following message when install Oracle7 on Windows 2000 Pro.
"oback.vrf(379) OS_ERROR while getting service status portmap"
How to solve it?? Thank you.

Oracle7 ???!!
Really you need that (so old) version ? Reason ?
Anyway, see if Re: Oracle 7 on a Pentium 4 may be of some help.

How to install 10g on windows 2000

Hello
Please guide me step by step as how to install 10g on windows 2000 .
I am a beginner and I want to install this setup in my office.At present we are using oracle8i on windows 2000.We want to do a fresh installation in a new setup and hence for the time being we are not going for upgrade or migration from 8i
Please guide me .
Thanks in advance.

Just follow the installation guide, that's all you need,
http://download.oracle.com/docs/cd/B19306_01/install.102/b14316/toc.htm
Make sure install Oracle 10g into different ORACLE_HOME than 8i

I Cant Install Itunes. Windows XP SP3

I Cant Install Itunes. Windows XP SP3
Please Help

Nothing to go on there, you need to explain what you did, what error messages you got and what steps you have taken to fix the problem.
I suggest you try this Apple help article on troubleshooting install problems.
http://support.apple.com/kb/HT1926

Cant install a bootcamp windows

Hi There,
i try to install a windows in bootcamp but a message apears that the HDD needs to have a sigle partition, and cant install a bootcamp windows.
but i check my disk Util and i have a single partition of 3TB
i make a few instalations of MAC OSX, and a couple of restores via timemachine and continue to cant make a partition via bootcamp

Repartition the drive to a single partition
Reinstall OS X, applications and data from backup
Start over agai with BootCamp
BootCamp only works on a drive with a single partition
Allan

Installing jdk on windows 7

Forgive me in advance as I am completely new to this. In September of this year I'll be starting an ict degree with the Open University. I figured I'd get a head start by learning a bit of java. I have installed jdk (64bit) for windows 7 fine, and altered the path so that the javac command works ok from the command prompt. However, it still does not work as I am getting the following error:
error while writing.......a required privelage is not held by the client
The problem seems to be that the javac application (and presumably all the others too) needs to be run in admin mode. I edited the properties of javac, and now when i use it from the command prompt it works fine. Is there an easier way around this?

Looks like you are trying to compile in a directory where you don't have rights.
Like a JDK directory under \program files. If this is the case, work in a directory under your user profile.
Copy samples from the JDK as necessary.

How to Install OPS on Windows 2000 Advance Server??

I just try to install Oracle Parallel Server on Win 2000 Advance
server, but it seems that the installation is not success.
I am using 2 Compaq Proliant ML530 PIII/Xeon as a hardware and
Windows 2000 Advance Server for Operating System.From the
vendor's tools checking, it stated thad clustering service is
already installed (ok!)
When I install Oracle Parallel Server, the default drive for
installation is already drive V (share disk), and Oracle
Parallel Server has been selected on the available product
components page, but I don't see node selection for install.
(According to Installing and Creating an Oracle Parallel Server
Database manual, I must select the nodes to which I want to
install the software from cluster node selection screen page)
Also when creating database (using Oracle database configuration
assistant), it does not displays database creation selection
(OPS or single instance configuration)as the first page, but
directly go to the second page (create/delete database).
Is the problem caused by wrong step of oracle Installation or OS
itself (ie: Cluster Manager)??
Anybody have experience on it can help me?
ps:I am using Oracle 8.1.7
Regards,
Suryanto

Please check whether you have installed the OSD layer (
Operating system dependent layer). Such layer can be obtained
from your hardware vendor ( eg compaq). You should have such
layer in your system before installing the OPS.
If you have such layer installed, you can see other nodes during
installation of Oracle and OPS.
Hope this help!

"Error 1721" when trying to install jdk-6u3-windows-i586-p.exe ??

When I try to install the just downloaded jdk-6u3-windows-i586-p.exe
= Java SE 6 upd 3 Development Kit on my WinXP computer at first everything seems fine.
I can choose the installation options (all except the Java DB).
and selected the installation folder and start the process.
The progress bar reaches approx. 80%.
Then suddenly it stops and a popup appears:
"Error 1721. There is a problem with this Windows installer package. A program required for this install to complete could not be run".
What's wrong ?
BTW: Upd 2 could be installed without problems.

Hi, Try reregistering the Windows Installer service.. For that restart you system in safe mode then
Open command prompt and excecute the below commands
1 msiexec /unregister
2 msiexec /regserver
Restart the system normally and check if it works.
If it doesn't work try using some registry cleaner like CCCleaner to clean your registry.
Hopw this will work ..

Error when installing RAC on windows 2000

Hi,
I'm installing Oracle 9i(9.0.1.1.1 EE) RAC for the first time. It has been an interesting experience,
with many bumps in the road. But now I'm stuck.
I have installed the 9i EE software, but when I try to create a database ( using DBCA), I get an error :
PRKR-1005 : adding of cluster database cludb configuration failed, PRKC-1018 : Error getting coordinator node
The error occurs after I have finished configurating, and the actual database creation starts.
I did get another error earlier : PRKR-1028 "raw device \\.\srvcfg is invalid, [HINT: initialize raw device by using
'srvconfig' tool]
That error disappeared after running srvconfig -init.
I have restarted the Oracle GSD services on both machines, but I still get the same error.
The OS is Windows 2000 Advanced Server, running on a Compaq Cluster.
Br,
Stefan

For more information about it:
Real Application Clusters Administration Contents / Search / Index / PDF
Real Application Clusters Concepts Contents / Search / Index / PDF
Real Application Clusters Deployment and Performance Contents / Search / Index / PDF
Real Application Clusters Documentation Online Roadmap Contents / Search / /
Real Application Clusters Real Application Clusters Guard I - Concepts and Administration Contents / Search / Index / PDF
Real Application Clusters Real Applications Clusters Guard I Configuration Guide Release 2 (9.2.0.1.0) for UNIX Systems: AIX-Based Systems, Compaq Tru64 UNIX, HP 9000 Series HP-UX, and Sun Solaris Contents / Search / Index / PDF
Real Application Clusters Setup and Configuration Contents / Search / Index / PDF
http://otn.oracle.com/pls/db92/db92.docindex?remark=homepage
Joel Pérez

Oracle 8i EE Install problems on Windows 2000

Problem 1 - LENGTH OF INSTALL FILES PATH.
The Oracle Universal Installer was coming up fine, but the "Next" button wouldn't do anything. After much trial and error, I discovered this to be related to the path of the install files. Rather than burning to CD, I had copied the install files into a directory C:\ORA816 - when I renamed this directory to just C:\O, the "Next" magically began working. This problem only occurs on Windows 2000, not NT4.
Problem 2 - CREDENTIAL RETRIEVAL FAILED.
I got this error (ORA-12638) from the Database Configuration Assistant. This just happened, so I haven't had a chance to figure it out. Has anyone encountered/fixed this problem in Windows 2000? I am running the install as Administrator.
null

Re: Problem 2. Just found out that this problem is resolved by removing the line SQLNET.AUTHENTICATION_SERVICES from
%ORACLE_HOME%\network\admin\sqlnet.ora
(see: http://technet.oracle.com//tech/migration/workbench/htdocs/relnotes.htm)

Trouble installing XP on Windows 2000 Thinkpad T43

I am trying to load XP pro, on a Thinkpad T43(2668). It was previously on this system. Currently the system has windows 2000 pro. When installing XP disc, the disc will not load. The bios is set load CD priority. I tried formatting, and deleting, and recreating the active partition, in Windows 2000 recovery. Also tried installing Xp pro disk, on clean system (no OS). Nothing works, CD, installation stalls and we get error messages
Error messages: i386/vga.oem, i386/ntkrnlmp.exe , blank screen, inf file txtesetup.sif corrupt or missing, are all errors I have gotten. Different error messages with each attempt at installation. Also have gotten “At: press any key to boot from CD”, no response.
I ran a RAM test on this system for 12 hours, and there are no errors.
This XP pro CD loads in other PC’s, no problem.
Any ideas?
Thanks
BA

You're looking at a bad media drive, or a bad disk itself, regardless of the fact that it loads on other units it may still be partially defective.
Try borrowing another media drive or using an USB CD-ROM to load the OS.
Good luck.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

Error installing jdk-1_5_0-windows-i586.exe

During second phase of the install process, I get this error message: "Error 1311.Source file not found: C:\Program Files\Common Files \Java\Update\Base Images\jdk1.5.0.b64\patch-jdk1.5.0b64\jo150000.cab. Verify that the files exists and that you can access it." After clicking Cancel, OK, and Finish, the installer indicates that the JDK was successfull installed. However, the public JRE was not installed. I have uninstalled the JDK and attempted to repeat the install several times with the same results..
I' m installing on Windows-XP Home Edition. I have previously installed the second beta and followed the instrustions to unstalling it before installing the release version.
I also have 1.4.0 and 1.4.2.02 installed.
Help

I am receiving a similiar error message:
Error 1311. Source file not found: c:\Documents and Settings\tee3\Local Settings\Temporary Internet Files\Content.IE5\58W7LIST\Down[1].htm. Verify that files exist and that you can access it.
This is strange because I have installed jdk 1. 5.0 before and I did not get this error. I needed to re-install the jdk1.5.0 in a different directory. Thats why I am re-installing it. I first un-installed it and then tried to re-install it. Thats when I get the error message above.
does anyone have a fix for this.

Install Error Under Windows 2000

I get an error when I try to install Server 7.3 (it's old, I know) under Windows 2000 Server:
obackup.vrf(379) OS_ERROR "while getting service startup pormap."
Anyone know what this means and I how get beyond it?
Thanks.

I get an error when I try to install Server 7.3 (it's old, I know) under Windows 2000 Server:
obackup.vrf(379) OS_ERROR "while getting service startup pormap."I have the same problem. Can anybody help?
TIA,
Vladimir Antropov
[email protected]

Cant install JDK on Windows 2000

Similar Messages

Maybe you are looking for