Cant install LIVE! Cam Video IM Pro

I have a dell Dimension 8400.I purchased a brand new web cam and I can not
install the software.
It gets to approx 44-76% and freezes.
I have tried several times.
My OS is Windows XP Pro -version 2002,
service pack 2. I have QUICKTIME 6.3 (only 7.0 and higher is reported a problem)
Any suggestions? My warantee runs out soon.

no one can help me? plz thx

Similar Messages

  • Live CAM Video IM Pro - Blue Screen (KS.SYS)

    Just purchased Live CAM Video IM Pro first creative product.
    My System: WinXP SP2, GB, Over 8 GB system space free.
    Installation went fine (no errors) post install requested reboot .. rebooted system. Blue Screen with KS.SYS.
    Uninstalled all software. re-installed with bare minimum. Troubleshooted the system multiple times. Finally got the culprit (Live Cam Video IM Pro driver).
    Without driver system works fine with drivers Blue Screen. Tried backup copy of KS.sys no success (seems KS.sys is dinged!)
    Result: The cam is useless.
    Any help is greatly appreciated.

    no one can help me? plz thx

  • Unable to get Live Cam Video IM pro to work with MS Messenger

    I have installed Live Cam IM Pro and all software from CD, plus updates. It works if I try Cam Manager ... I see myself in preview window.Looking in Start - settings - control panel - scanners & camera there is only one entry, the Live Cam pro. I cannot get it to work with Windows Live Messenger .... if I initiate a video call, it rings but when far end answers ... I get video window with ... video loading message, but it fails and I just get a standard XP icon. If I go to Messenger .. tools ..audio & video the camera sparks into life and again I see myself in preview.But when I go to tools .. webcam settings I see the error message :Cannot change camera settings because your camera is not plugged in or you are using it in a video conversation or with another programIt is obviously plugged in, and there are no other programmes running. I have tried deinstall & reinstall ... no difference. I have removed CD extras .. so now just have Cam Manager & Video driver ... but still no joy.Anybody know how to fix this ?
    Message Edited by Catherina-CL on 02-12-2007 08:39 AM

    Bump, fixed the post.
    Cat

  • 32 bit live cam video im pro vista dri

    I just purchased a li've cam video im pro and downloaded the vista 32 bit driver. I ran the setup and the files appear to be in the correct directory, but the "driver set-up" progress window stalls at 90%. I thought the installation might need the camera, so I plugged it in, but alas, to no avail. I've tried to install the camera 4 different times, but each time it goes all the way through the process and then freezes at 90%. I've doubled checked and I'm running a new install of Vista 32 bit on a ?new gateway computer. Anybody got any ideas?Pete

    no one can help me? plz thx

  • Live Cam Video IM Pro - Photo Capture Fails

    I can record video just fine w/the cam center software, but if I attempt to do a Photo Capture, get an error, "Cannot save photo..."? What's up w/that?

    Hi again, Ok I don't know what operating system that your using but I use vista home. I have sorted out the problem and heres how
    1 Uninstalled the software completly.
    2 Restart the pc.
    3 Reinstalled the software without the drivers.
    4 Pulled off vista drivers from creative list of update drivers.
    5 Restarted pc.
    6 Plugged in web cam and windows installed new driver.
    7 Openned up cam manager and hey presto it works.
    It took alot of messing around as I am a new user to vista after upgrading from xp, I hope this helps you to sort out your problem good luck

  • LIVE CAM VIDEO IM pro

    mysystem : pent IV , 2400 mhz ,52 MB ram -- usb2 - ADSL internet !!my question : i chat with skype and the " old " creative ( 460x260 ) minimum the last year -- WITHOUT ONE PROBLEM ---- YESTERDAY i take the NEW ONE from the shop and install ( 800x600 ) and the result :MAXIMAL 5-0 minutes ists work SUPER and than the pic was frozen ? could u give me a TIP for solution ? ( skype last version BETA 3.0.0.06 )thanks and regards from vienna gerhard

    Tobiasze,
    Here's the link to the quick start guide.
    This web camera does not have a built-in mic, you will need an external microphone. Chat software are easily available on their respecti've websites, all you need to do is just google search for it.

  • Live cam video im pro email servers trouble

    when i go to email a photo or video it only allowes me to go to outlook express and doesn't let me have the opion to use my yahoo email or even copy into a yahoo email can someone please help
    Message Edited by tlranger12 on 02-20-2009 02:03 PM
    Message Edited by tlranger12 on 02-20-2009 02:05 PM

    no one can help me? plz thx

  • Creative Live Cam Video IM Pro & Kubuntu

    Are there linux drivers available for this web cam? Sure would be nice to be able to use it on something other than Windoze. Or am I just SOL? Thanks,
    Scott

    I am having the same problems. Were you able to find a resolution? Please email be at [email protected] thanks, Bruce

  • Drivers for Live! Cam Video IM Pro?

    Where can I find drivers for the Live! Cam Video IM Pro? It's not listed in the driver dropdown at http://us.creative.com/support/downloads/...

    Check again, the driver is available now ..... uploaded on 8 Jan 07.

  • Live! Cam Video IM Pro (VF0410) HELP!!!!

    i bought this webcam today - Live! Cam Video IM Pro (VF0410) - but i can't get it to show in black and white.
    Anybody who can help getting my webcam black and white?
    thank you!

    I too have the same problem. It seems to be a flaw with the software or the hardware. If you disable the auto exposure setting the frame rate will still site at 4-5 fps.
    If you then move the exposure slider to the far left and then back to the right the frame rate will immediatley increase to 20-30 fps, but the exposure is quite poor even with the adjustment of brightness, contrast, etc. Is this a software bug or a hardware flaw?

  • Live! Cam Video IM Pro drivers, GET EM HERE

    Tada,
    The Li've! Cam Video IM Pro drivers :
    http://d.turboupload.com/d/428788/english.zip.html
    nomorecreative sent me the drivers and i'm posting them for you all here.
    enjoy, and creative, seriously, not that hard.

    Check again, the driver is available now ..... uploaded on 8 Jan 07.

  • Cant install windows 8 on macbook pro 13 inch mid2010

    Cant install windows 8 on macbook pro 13 inch mid2010 Mountain lion 10.8.3. When i insert the windows 8 CD and try to install it on bootcamp Version 5.0.2 it say "Windows 8 is not supported on this Mac, Boot Camp only supports installing Windows 7 on this Mac. Please insert a DVD which contains a full version of Windows 7." i saw other topics using same mac and they installed it.
    Please need help

    Your computer is not supported for Windows 8. Read the System Requirements here http://support.apple.com/kb/HT5634. In case you missed the table of supported systems I'll repeat it below. Please note that your computer is listed as not supported.
    Mac model
    Windows 8, 64-bit
    Windows 7, 64-bit
    Windows 7, 32-bit
    Windows Vista, 64-bit
    Windows Vista, 32-bit
    Windows XP, 32-bit
    MacBook Pro (Retina, 13-inch, Late 2012)
    5
    5
    MacBook Pro (Retina, Mid 2012)
    5
    5
    4
    MacBook Pro (13-inch, Mid 2012)
    5
    5
    4
    MacBook Pro (15-inch, Mid 2012)
    5
    5
    4
    MacBook Pro (17-inch, Late 2011)
    5
    5
    4
    MacBook Pro (17-inch, Early 2011)
    5
    5
    4
    MacBook Pro (15-inch, Late 2011)
    5
    5
    4
    MacBook Pro (15-inch, Early 2011)
    5
    5
    4
    MacBook Pro (13-inch, Late 2011)
    5
    5
    4
    MacBook Pro (13-inch, Early 2011)
    5
    5
    4
    MacBook Pro (13-inch, Mid 2010)
    4
    4
    4
    4
    4
    MacBook Pro (15-inch, Mid 2010)
    5
    5
    4
    4
    4
    4
    MacBook Pro (17-inch, Mid 2010)
    5
    5
    4
    4
    4
    4
    MacBook Pro (13-inch, Mid 2009)
    4
    4
    4
    4
    4
    MacBook Pro (15-inch, 2.53 GHz, Mid 2009)
    4
    4
    4
    4
    4
    MacBook Pro (15-inch, Mid 2009)
    4
    4
    4
    4
    4
    MacBook Pro (17-inch, Mid 2009)
    4
    4
    4
    4
    4
    MacBook Pro (17-inch, Early 2009)
    4
    4
    4
    4
    4
    MacBook Pro (15-inch, Late 2008)
    4
    4
    4
    4
    4
    MacBook Pro (17-inch, Late 2008)
    4
    4
    4
    4
    4
    MacBook Pro (17-inch, Early 2008)
    4
    4
    4
    4
    4
    MacBook Pro (15-inch, Early 2008)
    4
    4
    4
    4
    4
    MacBook Pro (17-inch, 2.4 GHz)
    4
    4
    4
    MacBook Pro (15-inch, 2.4/2.2GHz)
    4
    4
    4
    MacBook Pro (15-inch, Core 2 Duo)
    4
    4
    MacBook Pro (17-inch, Core 2 Duo)
    4
    4
    MacBook Pro (17-inch)
    4
    4
    MacBook Pro (15-inch, Glossy)
    4
    4

  • Cant install elements 9 on macbook pro retina. no optical drive

    I bought a new macbook pro retina. it doesnt have an optical drive. i purchased the adobe photoshop elements 9 but cant install it now. can i download it from the adobe website and how do i do that. thanks

    You can download the trial version of the software using the link below and then use your current serial number to activate it.
    Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site.
    http://prodesigntools.com/photoshop-elements-9-premiere-elements-9-direct-download-links.h tml

  • How to install master cam in macbook pro version 10.9.2

    i want to instal master cam ,creo and some other designing softwares in my mac.is it possible to install these software in my mac?

    MasterCam, at least, is Windows only. That's doesn't mean that it won't work on your Mac, though. You can install a Boot Camp partition and install Windows on it or you can use a virtual machine using something such as Parallels to run Windows. Not sure about Creo - you can Google it and see if there is a Mac version.
    Clinton

  • Cant install all fo dvd studio pro....plz help

    I cant install the full program only the windows, but none of the templates or transitions ro anything, I cant do anything in the program. When i go to install the templates it says i dont have the required hardware or my computer doesnt soppurt the installation method. If anyone has any suggestions, I would greatly appreciate them. Thanks in advance.
    Rob

    Since you meet the spec I'd think about something regarding the OS.
    check for updates; in particular I think there was a firmware update.
    Fix Disk Permissions-good habit
    Move the DVDSp plist to the desktop, restart DVDSP (from the application, not a project).
    check the Library/Application Support/DVDSP folder. This is where the templates need to reside. If they are there then DVDSP, the application, has lost this information. If they are not there then the install process has not worked completely.
    Create another user on this machine with similar privilges. If this user is successful then there is some (?) bogus user prefeences. Not sure what to look for but a combination of bad preferences might be suspect.
    4 x 2.5 GHz G5 2GB SDRAM   Mac OS X (10.4.8)  

Maybe you are looking for

  • Firefox crashes upon start up in normal and safe mode

    Can't open firefox in either mode, it immediately gives me a crash report pop-up

  • How to configure oracle to SAP NETWEAVER DEVELOPER STUDIO STEP RAGARDING

    hi can u help me on this i got problem regarding configuring oracle to sap NetWeaver developer studio what i have deployed any thing studio that would reflected to database bye

  • OBI REPORTS DefaultNumericformat is currently $0.00.as It should be integer

    We have OBIEE environment setup with version 10.1.3.4.1 and currently For all of our OBIEE reports, for columns where the numeric format is not specified, a default format is used and Currently that default format appears to be currency to 2 decimal

  • Font size on Planning form

    Hello I've made a Planning data form but figures on the form have different font size (see screenshot) - figures on total elements have a bigger font size than figures on leaf elements. How can I change the font on form to the one size? Screenshot ht

  • Problem displaying charts

    Hi all, I have a report and I have 4 charts linked to it The problem is that the 4 charts (3D) don't have the same size displaying I am displaying 2 charts on Region position 1 (using column 1 & 2 ) & 2 charts at region position 2 (using column 1 & 2