Cant install ML - Error "You cant use this Volume as Startup Volume"

Hello,
i have Lion 10.7.4 on an mid 2010 MBP17"
Whe i try to install ML my Bootpartition (also my only one partition) is grayed.
An i became an error simmilar to "you cant use this volume as your startup volume for your computer"
I am verry confused, becouse it is my startup volume.
I have over 50GB of free space.
anyone an idea, about this problem?
PS i have no recovery partition.
When i startup with alt key i only can select my "one - and only" partition.
Greetings from Hamburg
Marc

PS i have no recovery partition.
When i startup with alt key i only can select my "one - and only" partition.
Running the Lion installer on your disk again should re-create the Recovery partition.
Edit: I hope you've saved the installer?

Similar Messages

ERROR: You cannot use this transaction type to post to this asset M.NO.AA83

Dear Team,
I am encountering a problem regarding the downpayment request.While doing the downpayment request with the main asset instead of AUC. System is showing the above mentioned error.For this i have done the configuration changes in OAYB.It is working fine with DEV server.When i am testeing the same in QAS i am facing the problem.Tables of asset accounting and configuration everything is same for the both .But I am unable to trace out y this has happend.Please advise me how to proceed further.Thanks for the considertion.
Regards,
Suma.

Hello,
Please see if the following note helps you out.
Note 1091728 - Down payment posted to fixed asset despite message AA 834
Regards,
Ravi

Error on ALL CS3 Products: "You cannot use this product at this time..."

Hello all,
I woke up this morning and attempted to launch Adobe Photoshop CS3. I received the following error:
"You cannot use this product at this time. You must repair the problem by uninstalling..."
At the same time I tried opening Photoshop, my Antivirus application (ESET NOD 32 Antivirus) indicated that it found a "threat" named AdobeLM_libFNP.dll.
I then tried opening DreamWeaver CS3. Same issue. Also got another threat notification from ESET NOD 32.
Non CS3 products (Photoshop CS2, Illustrator 10) do not appear to be affected.
I've already referred to the TechNote for this issue. I've tried all of the solutions, except for uninstalling and reinstalling the software.
http://kb.adobe.com/selfservice/viewContent.do?externalId=kb401528&sliceId=1
I really don't have the time today to uninstall and reinstall all of my Adobe apps. I'm hoping there is another solution.
I'm running a complete system/virus scan right now and its coming up with threats left and right... all of them are Adobe-related w/file names like "AdobeDeviceCentralAll1.cab"
Can anyone help?

>At the same time I tried opening Photoshop, my Antivirus application (ESET NOD 32 Antivirus) indicated that it found a "threat" named AdobeLM_libFNP.dll.
if you're SURE that's a virus, you'll have to reinstall the full app. my guess is you AV app is a little too aggressive in it's scanning and it stopping the adobe license manager (AdobeLM) from running so you can't run your apps.
having heard of adobe, but never heard of est nod, i'd trust adobe 1st... try another virus scanner. for example avg (free or paid) or kaspersky, panda, mcaffe, symantec, etc.
hmm googling i found a pcweek review. they say it's great at catching "unknown" viruses (proactive protection) but "less than stellar" at stopping and disenfecting lots of other malware. so it may be thinking because of the behaviour of the ALM, nod32 thinks it's caught an unknown virus.
http://www.pcworld.com/article/id,130906/article.html
>When it comes to proactive protection, Eset's NOD32 was the hands-down winner in "Virus Stoppers," our eight-program antivirus roundup. In our tests, it caught 79 percent of unknown malware samples when using one-month-old signature files. The next-closest program, BitDefender Antivirus 10, came in with a distant 61 percent
>NOD32's overall malware detection rate wasn't stellar, however. When pitted against AV-Test.org's nearly 900,000-strong "zoo" of Trojans, viruses, and other malware, NOD32 caught only 90 percent, compared to the 96 percent rate of top performers Kaspersky Anti-Virus 6, Symantec Norton AntiVirus 2007, and BitDefender Antivirus 10. It fared surprisingly poorly with 32-bit Windows viruses (approximately 1 in 11 samples in the zoo), catching only 73 percent.

Asset Settlement You cannot use this transaction type to post to this asset

Hi All,
A CAPEX is created. An Asset is created. The asset is assigned to CAPEX under settlement rule. Out of several purchases made against the CAPEX, settlement for 2 months are carried out and the value of CAPEX was transferred to Asset.
However, during the current month, while doing the settlement, the system is giving the following error :-
"You cannot use this transaction type to post to this asset"
Message no. AA 834
The details diagnosis of the error message is
"The transaction type entered belomgs to transaction type group 15. It has been specified for this transaction type group, that it is only allowed to post to asset classes for which it has been explicitly allowed (for example, the asset class for assets under construction). The asset to which you are posting belongs to class PM-501 (chart of depreciation DEIL). You cannot post to this asset class using the transaction type entered"
Request to please let me know what could be the possible reasons for system giving such message adn how to rectify it.
Regards
Santosh

Hi Santosh,
I would suggest that you Check the <b>asset number</b> you entered. You may want to allow posting to this asset class using this transaction type group. If this is not the case, then, you may have to ask the business to reverse the initial posting causing this error and re-post with the correct transaction type that is allowed for this asset class.
I hope the above helps.
Do not forget to award the points please.
Regards,
Jacob

I have Iphone 4 and its lock.(simlock) from t-mobile. I was call 3 days ago t-mobile and they said 2 day later you can use this iphone. But now I cant use. this phone say its lock. But t-mobile was unlock it.

go t-mobile and they said 2 day later you can use this iphone. But now I cant use. this phone say its lock. But t-mobile was unlock it.

fatih ozkan wrote:
...T-mobile say you must ask apple.
Apple does not Unlock phones... T-mobile is giving you the runaround... Contact T-mobile as suggested.

I just downloaded Snow Leopard to my Mac Book, now my ICalendar says I cant use this version of iCal with this version of Mac OS X, i currently have ICal 3.0.8.....what do i need to do?

I just downloaded Snow Leopard to my Mac Book, now my ICalendar says I cant use this version of iCal with this version of Mac OS X, i currently have ICal 3.0.8.....what do i need to do?

Your profile shows you are running Snow Leopard. Put the Safari version you now have into the Trash. You need to reinstall Snow Leopard.
Reinstall OS X without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.

Trying to launch photoshop cs3 on a mac running OS10.6.8 i keep getting the error message: Licensing for this product has stopped working you cannot use this product at this time. You must repair the problem by uninstalling and then reinstalling this pro

trying to launch photoshop cs3 on a mac running OS10.6.8 i keep getting the error message: Licensing for this product has stopped working you cannot use this product at this time. You must repair the problem by uninstalling and then reinstalling this product or contacting your IT adminstrator or Adobe customer support for help
I already Uninstalled and reinstalled the product and it still does not work.

Hi,
Try to uninstall the software again and you have to manually
Delete the following folders:
[Startup Disk]/Library/Application Support/Adobe/Adobe PCD
[Startup Disk]/Library/Application Support/Adobe/caps
[Startup Disk]/Library/Application Support/Adobe/backup
[Startup Disk]/Library/Preferences/FLEXnet Publisher/
[Startup Disk]/Library/Application Support/FLEXnet Publisher/
Go to Applications-->Utilities-->Disk Utility, Open it and Select the MAC HD and then click on Repair permissions.
After that try to run the cleaner tool as mentioned by kglad.
Restart machine and then try to install again.
*** Make sure , you only delete these folders if there is no other adobe applications installed on the machine. As if you have any other Adobe application of the suite ( not free applications ) then it will be a problem.

Acrobat 9 Pro Error 148:3 You cannot use this product at this time

Am running XP Pro SP3 with Acrobat 9.0 Pro Extended. Until I installed Comodo antivirus software yesterday, Acrobat worked fine. Now when I open Acrobat I get an error message similar to this: “You cannot use this product at this time. You must repair this problem by uninstalling and then reinstalling this product or contact your IT . . . (148:3).” Then when I click OK, Acrobat shuts down.
I’ve tried the Licensing fixes found at http://kb2.adobe.com/cps/405/kb405970.html but fixes didn’t work. I uninstalled and reinstalled. Now when I try to install updates, it looks like it’s installing but at the end the installation says it failed.
Any ideas on how to resolve my problem? Thank-you.

Bill, you're correct and thanks for your help. In my particular case, Acrobat Pro was working fine until I upgraded Comodo (from the green/white shield to the red shield). Thnking it was an Acrobat problem, I uninstalled Acrobat Pro and reinstalled Acrobat Pro with Comodo turned off. Still got the "148:3" error msg. Solution, I uninstalled Comodo and restarted the computer. Then updated Acrobat Pro, there were two updates. Restarted computer. Then installed Comodo. Everything now works fine.

My email server is down(yahoo.cn), cant use this email right now. I want to check my account and cancle monthly payment of photoshop, but i need to verify through my email. what should i do?

my email server is down(yahoo.cn), cant use this email right now. I want to check my account and cancle monthly payment of photoshop, but i need to verify through my email.

All account maintenance is done using your Adobe ID and signing in at Adobe
For anything else, you need Adobe staff to help
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us"
-or by telephone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

My Adobe Acrobat 9 Standard stopped working after I performed an msconfig. I get the following message: "You cannot use this product at this time. You must repair the problem by uninstalling and reinstalling this product..." I installed this on Jan. 7, 20

My Adobe Acrobat 9 Standard stopped working after I performed an msconfig. I get the following message: "You cannot use this product at this time. You must repair the problem by uninstalling and reinstalling this product..." I installed this on Jan. 7, 2010 and I have since misplaced the disk.
How do I fix the problem?

Hi Ali,
You can download Acrobat 9 Std. from: https://files.acrobat.com/a/preview/8d640488-4a92-4f7d-b50b-d8eb7f96bff8
and reinstall the software.
Regards,
Rave

I cannot utilize my Adobe documents - I get this error message - "You cannot use this product at this time. You must repair the problem by uninstalling and then reinstalling this product or contacting your IT administrator or Adobe customer support for h

I cannot utilize my Adobe documents - I get this error message - “You cannot use this product at this time. You must repair the problem by uninstalling and then reinstalling this product or contacting your IT administrator or Adobe customer support for help.”

Thank you! My solution was different. I had turned off services in MSCONFIG and did not turn them back on. After I turned services back on, Acrobat started working again without the nag error and impedance to use the program. I appreciate your input! Adobe customer service/tech support was dismally disappointing.

Error C1189: #error : ERROR: You must use a GNU Compiler.

Hi everyone!
I have just ran into an error in which I don't know how to resolve. I'm trying to compile some code I have but it gives me the following : error C1189: #error : ERROR: You must use a GNU Compiler.
Before receiving this error I had received one stating that the header file "_mingw.h" was missing. I located that file and placed it in the correct folder. I also updated the project properties to locate the header file. The error itself says
that I must use a GNU Compiler but I'm not exactly sure how to do this.I do have mingw installed on the PC though
The error points to this part of the code :
#define __MINGW32_VERSION           3.2
#define __MINGW32_MAJOR_VERSION     3
#define __MINGW32_MINOR_VERSION     20
#define __MINGW32_PATCHLEVEL        0
#ifndef __GNUC__
#error ERROR: You must use a GNU Compiler.
#endif
#if (__GNUC__ < 3 || !defined(__GNUC_MINOR__) || (__GNUC__ == 3 && __GNUC_MINOR__ < 4) || (__GNUC__ == 3 && __GNUC_MINOR__ == 4 && __GNUC_PATCHLEVEL__ < 5))
#error ERROR: You must use a GNU Compiler version >= 3.4.5.
#endif
Also to note, I have the most recent version 4.8.4.1 of the compiler.
Any ideas on what I should so to fix this? Did placing the _mingw.h file in the folder have anything to do with it?
I would appreciate any help!! :-)

It appears that the author of the code you are compiling intended it to be compiled with the GNU compiler, not the Visual C++ compiler. So they manually inserted an error message (guarded by the #ifndef __GNUC__ check) so that if you compiled it on
Visual Studio, you'd be alerted to that fact.
I'm afraid you are now faced with either porting this code or finding a Windows distribution of it that is compatible with Visual Studio.
*NOT RECOMMENDED*, but to begin the process of porting it , simply delete the #error line from the source code and recompile with visual studio. You can expect millions of specific issues will need further attention. After all, it's probably
there for a reason. If you are new to this, that's probably NOT what you want to do.
On the other hand, what were you trying to compile that needed _mingw.h? That's the piece that needs to be configured correctly. You are likely not building it as the author intended.

"YOU CANNOT USE THIS APPLICATION SAFARI WITH THIS VERSION OF MAC OS X"

hi, just downloaded the update for mac 10.5.1 - all went well - then tried to open Safari and received this message "YOU CANNOT USE THIS APPLICATION SAFARI WITH THIS VERSION OF MAC OS X" - I have tried downloading Safari again through netscape but that does not seem to work either - ANY IDEAS???? Thanks

It sounds likely that you have more than one copy of Safari on your hard drive. The one in your Applications folder is the one you should have. The one you're trying to launch is an older version that somehow got moved somewhere else, so that the new version got installed in your Applications folder (where it should be) while the old version is running (or trying to run) from another location.
First, double-click on the Safari application file that you have in your Applications folder. Does it run properly, without error messages? If so, everything is fine. You just need to get rid of the old version of Safari and set it up so you can easily launch the new version that is in your Applications folder.
Are you clicking on the Safari icon in your Dock when you see the error message? If so, do this: Control-click on the Safari icon in your Dock and select "Show in Finder" from the contextual menu. A Finder window should open showing the location of that copy of Safari. If that Finder window is any location other than the Applications folder, delete the Safari file that is in that folder. Then drag the Safari icon out of your Dock. Navigate to your Applications folder and drag the Safari file from the Applications folder to your Dock.
You should be all set, but click on the new Safari icon in your Dock to make sure it is the correct version and runs without problems.
Message was edited by: Rachel R

You cannot use this product at this time...

Whenever i try to open dreamweaver CS3 following error occur
and application is closed
You cannot use this product at this time. You must repair the
problem by uninstalling and then reinstalling this product or
contacting your IT administrator or Adobe customer support for
help

quote:
Originally posted by:
Newsgroup User
It's a bad install.
> Whenever i try to open dreamweaver CS3 following error
occur and
> application
> is closed
>
>
You cannot use this product at this time. You must repair the
problem
> by
> uninstalling and then reinstalling this product or
contacting your IT
> administrator or Adobe customer support for help
>
i uninstall and install again and again but probleme is going
on
than
i formated PC and i install new Windows XP_SP2 an immediately
i install DW CS3 again but problem is going on again

You cannot use this transaction type to post to this asset Message no. AA83

< MODERATOR: Message locked. Please post this message in the [Asset Accounting forum|SAP ERP Financials - Asset Accounting;. >
Hi,
I am settling credit values [-ve values] from WBS to Asset Under Constructions Assets during CJ88 period settlement run.
These assets belongs to Investment Measure. For few assets I am getting below error and
You cannot use this transaction type to post to this asset
Message no. AA834
Diagnosis
The transaction type entered belongs to transaction type group 15. According to the specifications for this transaction type group, posting with transactions types belonging to this group are only allowed in specific asset classes (for example, asset classes for assets under construction).
The asset to which you are posting belongs to class XXXXX (chart of depreciation XXXX). You cannot post to this class using the transaction type you have entered.
Procedure
Check the asset number entered. You may want to allow posting with this transaction type group for the asset class of the asset.
I know normally we do this way
During charging
Dr Exp A/c WBS name
Cr B.S A/c
During settlement
Cr Exp A/c WBS name
Dr AuC GL A/c
But we have situation that during settlement, we are doing reverse
ie., Cr AuC GL A/c
Dr Exp A/c WBS Name
These expenses are through POs and no downpayments. The below error taking me to down payment accounts config but we dont have down payment scenario, can any one advise, thanks
Regards,
Sridhar

Hi,
Please check the SAP note 1091728 for this.
Regards

Cant install ML - Error "You cant use this Volume as Startup Volume"

Similar Messages

Maybe you are looking for