Cant install osx 10.7.2 on macbook pro?

i shut my macpro down while install lion.Now cant install but can snow leopard!it says try install it.Deleted disk and its partitions in disk utility.No success!installed again snow leopard.Support pls.

Yes I tried to add the printer through the system preferences already. It sets up fine but the status remains idle no matter what i change.

Similar Messages

Cant install osx Mavericks while restoring my Macbook

I planned to restore my mac book pro (2013 model) back to factory settings. After erasing the hard drive i attempted to install the recovery and while downloading osx mavericks it always stops a little after half way. I dont know what to do ive tried multiple times to install it but it always gets stuck. Im so bummed my mac is just sitting here useless.

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select
/var/log ▹ install.log
from the hierarchical list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar. Then select the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, start over and note the time. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

After installing the windows 7 on the Macbook pro, i accidentally disabled the Macintosh hd and Recovery Hd and now now cant see them on start up

After installing the windows 7 on the Macbook pro, i accidentally disabled the Macintosh hd and Recovery Hd and now now cant see them on start up
I need to boot to macintosh but i cant see the drive nor to restore to the fastory settings through recovery HD, What can i do

hold down the option key during boot it give you the option of what parition you wish to boot into

Is there any way to install OSX Mountain Lion to a MacBook Late 2007

hey i was just wondering is there was any way to install OSX mountain lion to a macbook late 2007. ive gottan it before to point where i was about to boot up into the software but on the boot screen i got a stop sign. please help me if you can. thank you

i just ran the follw=owing command on mac
ioreg -l -p IODeviceTree | grep firmware-abi
and the resond i got was
"firmware-abi" = <"EFI64">
so what does this mean

Is anyone having trouble installing Adobe flash player on a MacBook Pro?

Is anyone having trouble installing Adobe flash player on a MacBook Pro with OSX 10.7.5?

Thanks for your help here is what I did so far!
I have uninstalled Adobe and reinstalled it, I've tried restarting my browser, then my MacBook Pro without any success!
When I click on the Apple in the upper left hand corner and open System Preferences I can see Adobe Flash Player on the bottom under the Other section.
If I open Adobe up and check the version it tells me that I have the most recent version!
I even uninstalled Adobe and installed the newest Beta version, but Adobe is still not working! If I check for the latest version it tells me that I do have the latest beta version, but it still doesn't work!
If the person who made the video used any other video player it works!
Their player, plays the video without a problem!

Mac OSX Lion on a Retina MacBook Pro (2014)

Hi,
I need to install Mac OSX Lion on a Retina MacBook Pro (2014) on a second partition. I have the installer for Lion and everything, but I'm not sure if it will work on such a new mac. Any experiences?
Thanks
Marco.

It won't work. You can't install an older version than the Mac shipped with.
Matt

HT1338 After migration from MacBook 13' running OSX 10.6.8 to MacBook Pro 15' Retina OSX 10.8.2 using Migration assistant, the Bluetooth assistant mentions "name not available" and it cannot detect my Magic trackpad. There is no mention of any mishap.

I just migrated from MacBook 13' OSX 10.6.8 to MacBook Pro 15' Retina OSX 10.8.2 with the use of Migration Assistant. When attempting to install my Magic Trackpad, the Bluetooth Assistant mentions "name not available" so that the device cannot be detected. In have disconnected the firewall.Thanks for assistance.

Create a new, temporary admin account and see if you can set it up in that account.

HT1222 Anybody else having problems installing itunes version 11 on a MacBook Pro?

Anybody else having problems installing itunes version 11 on a MacBook Pro? Is so, how can they be resolved?

You need to tell us exactly what messages you are seeing.
You posted this in the OSX 10.4 forum but your computer profile says you are running OSX 10.6.8 Which system version you are running makes a big difference.

Problem with installing Flash player 14 in my Macbook Pro

I tried to install Flash player 14 in my Macbook Pro, however, it stuck at "retrieving install" screen, it is supposed to be a new version, anybody has the same problem?

Yes same issue. I even tried chatting with adobe support but they did not help as I am not a paid subscriber. I have seen many others with the same issue. I hope adobe is aware of this. am trying to contact them.

Enhance/Color Adjust/Color variation, seems to be missing in PSE 12. Can I install another version of PSE to Macbook pro Maverick 10.9.3 that has that feature? I use it ALL the time...

Enhance/Color Adjust/Color variation, seems to be missing in PSE 12. Can I add/install another version of PSE to Macbook pro Maverick 10.9.3 that has that feature? I use it ALL the time... Thanks.

Enhance/Color Adjust/Color variation, seems to be missing in PSE 12. Can I add/install another version of PSE to Macbook pro Maverick 10.9.3 that has that feature? I use it ALL the time... Thanks.

How can I install Snow Leopard on my 15" MacBook Pro without using its DVD drive?

How can I install Snow Leopard on my 15" MacBook Pro without using its DVD drive?

I'm assuming your dvd drive is broken? if you have a thumb drive large enough (8GB or better), you can use another computer to make a bootable image from the install dvd to the thumb drive. then you can install from the the thumb drive.
Ihttp://www.maciverse.com/install-os-x-snow-leopard-from-usb-flash-drive.html
that's a step by step walkthrough.

Cannot install Windows XP Professional on my MacBook Pro using Boot Camp.

Cannot install Windows XP Professional on my MacBook Pro using Boot Camp. When I get to the point of inserting the Windows disc and clicking 'Install' at the Boot Camp Assistant screen, it keeps telling me that it cannot find the Install Disc. The installation disc I am using is a new full install disc. I have tried to do the same thing using a Windows 7 disc with the same results. Does anyone have any answers. I am getting desperate!

saturnotaku wrote:
Csound1 wrote:
Windows XP is not supported, install Windows 7 or 8.
Reading the entire post is your friend:
I have tried to do the same thing using a Windows 7 disc with the same results.
Perhaps you could offer a suggestion then.

How Do I Install Windows 7 to Early 2013 Macbook Pro?

I need to own a windows pc or at least have windows 7 environment to work in for some college courses. I own Windows 7 Pro. Is there a way for me to install this onto my current my Macbook Pro Retina Early 2013 Release?
If So, How do I do this?
Can it be done to an extrernal 1TB Hard Drive that I can plug in and use only as needed?
Will I be able to install Microsoft Office 2010 to only the Windows SIde?
How do I do this?
Thanks Ahead of time.

Limbic_Pastry wrote:
I need to own a windows pc or at least have windows 7 environment to work in for some college courses. I own Windows 7 Pro. Is there a way for me to install this onto my current my Macbook Pro Retina Early 2013 Release? ...
While it's possible to run Windows 7 or the Mac OS using Bootcamp, you can run Windows 7 and the Mac OS at the same time by creating a virtual machine (VM) using VMware Fusion, Parallels, or Virtual Box. One advantage of a virtual machine is that you can put the VM file on an external drive so that the VM file size isn't limited to available space on your internal. Another is that you can back up that file and/or create snapshots of the state of Windows at any point in time and revert to that state in seconds if something (e.g., a virus infection) goes terribly wrong. I have such a setup running in a rMBP early 2013 myself and it's very fast.

How do I install Mavis Beacon Deluxe 20 on macbook pro? I had MB (20) on my last macbook pro.

How do I install Mavis Beacon Deluxe 20 on macbook pro? I had MB (20) on my last macbook pro.

This is off the Broderbund website, and applies to the most current version. It looks like they only support through 10.8.
MINIMUM SYSTEM REQUIREMENTS:
Windows® XP, Windows Vista®, Windows® 7, Windows® 8¹, Pentium® or AMD Athlon™ Processor, 512MB RAM (1 GB RAM for Windows Vista®, Windows® 7, and Windows®8), 600MB of free hard disk space, Video Card & Sound Card, DVD-ROM, keyboard & mouse, and speakers or headphones. Mac® OS X 10.6 – 10.8¹, Intel® Core™ Processor, 512MB RAM, 600MB free hard disk space, Video Card & Sound Card, DVD-ROM, keyboard & mouse, and speakers or headphones. ¹Administrator privileges are required to properly install the program on Windows® XP, Windows Vista®, Windows® 7, Windows® 8, and Mac® OS X. *Minimum full display after automatic re-configuration is 800x600, but the program can operate on a Netbook device with a 1028x540 resolution. *High quality audio system or head set is recommended.

Can't install windondows 8.1 on my macbook pro - format issue

Can't install windondows 8.1 on my macbook pro - format issue
Running latest version of Mavericks.
Followed the exact bootcamp proceduce.
Have official window 8.1 version on cd.
All goes well until I have to format the 65Gb partition. Disk=0 and partition=4
Can't get over it. Altough I formatted it via a hint found on the internet with "dislpart" in NTFS. Wich also went weel and give the labelname "BOOTCAMP". But still no luck.
I have two questions:
1/ How to start my mac again in normal mavericks mode?
2/ How can I overcome the windows installation issue?
Tried already a lot of hints found on the internet.

First, make a time machine backup. You will need to erase ands reformat your hard drive. I had the same issue. The issue is that you can't install Windows using bootcamp without having the hard drive formatted as Mac OS Extended (Journaled). Do this from disk utility or recovery mode (hold down command and r at startup). Then you have to restore the backup to the hard drive. Then make a usb installer drive with bootcamp and then partition and install. Here's a tip: after you install bootcamp and are in the Windows desktop, go into the installer drive and then go into the bootcamp or support folder, then find a installer that contains the Apple bootcamp drivers. Also, you will need to convert the disk to an iso file. TO MAKE THE USB DRIVE FROM A DISC, USE THIS LINK
Boot Camp: Creating an ISO image from a Windows installation DVD - Apple Support

Cant install osx 10.7.2 on macbook pro?

Similar Messages

Maybe you are looking for