Cant install osx Mavericks while restoring my Macbook

I planned to restore my mac book pro (2013 model) back to factory settings. After erasing the hard drive i attempted to install the recovery and while downloading osx mavericks it always stops a little after half way. I dont know what to do ive tried multiple times to install it but it always gets stuck.  Im so bummed my mac is just sitting here useless.

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select
/var/log ▹ install.log
from the hierarchical list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar. Then select the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, start over and note the time. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

Similar Messages

  • Cant install osx 10.7.2 on macbook pro?

    i shut my macpro down while install lion.Now cant install but can snow leopard!it says try install it.Deleted disk and its partitions in disk utility.No success!installed again snow leopard.Support pls.

    Yes I tried to add the printer through the system preferences already. It sets up fine but the status remains idle no matter what i change.

  • After installing osx mavericks my macbook pro restarts all the time

    after i installed osx mavericks my mackbook pro always restarts again and again
    can someone help me?

    I have the same problem with my 2012 imac.
    Maverick is working great on two macbook airs but the imac crashs multiple times a day. It's killing me as it's our workhorse.

  • HELP! I can't install OSX Mavericks on MacBook Air

    Help! I just download and install OSX Mavericks on MacBook Air (2012), its already downloaded and installed but when booted, the wheels machine on the screen keep running. its even more an hour and i restarded it for severel times. but still not working. should I wait until the installation finished? for how long? 1, 2, or 3 hours?

    Then the hard drive is corrupted. You will need to erase it then reinstall:
    Install or Reinstall Mavericks, Lion/Mountain Lion from Scratch
    Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Erase the hard drive:
      1. Select Disk Utility from the main menu and click on the Continue button.
      2. After DU loads select your startup volume (usually Macintosh HD) from the
          left side list. Click on the Erase tab in the DU main window.
      3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
            the Security button and set the Zero Data option to one-pass. Click on
          the Erase button and wait until the process has completed.
      4. Quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Install button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible
                because it is three times faster than wireless.

  • Tried to install OSX Mavericks now MBP won't load

    Hi all
    Last night I tried to install OSX Mavericks on my MBP mid-2010 running Mountain Lion. It downloaded fine and then seemed to install fine. When the message came up saying it was going to restart automatically the spinning wheel hanged, which was the first problem. I switched off the MBP and turned it on again. It now refuses to boot up and stays on the Apple bootup screen with the spinning wheel.
    I've tried to restart in recovery mode but this doesn't seem to work. It just goes back to the spinning wheel and there is no progress bar that pops up to indicate the recovery data is being downloaded from the net (I don't have a recovery partition).
    I have a backup external hard drive that I can use to restore my MBP and then try upgrading again, but I can't use that until I get into recovery mode.
    Is anyone able to help?
    Thanks

    Ok so I worked out how to get into recovery mode. Turns out I was doing it wrong! I used an external USB drive to access recovery mode.
    I ran disk utility which identified and fixed some errors on the HD. I thought this might solve the problem but when I restarted the same problem occurred. I then restored my time machine backup which thankfully worked.
    I tried installing mavericks again! Upon restarting and completing the install, I got the message 'OSX has been installed. Your computer will now restart'. After the countdown had finished I got the beach ball which span eternally again, just like last time. After about 10 mins I did a hard reset and again OSX won't load.
    Lame...

  • Tried to install OSX Mavericks, Now Won't Install

    Started to download and install OSX Mavericks on my Mac Pro laptop.  For some reason download failed, and I get a message to that effect.  Message says to go to "Purchased Items" in App Store and try to download again.  Continually get message that there is an error and download fails.  Any suggestions to get the OSX Mavericks successfully downloaded?

    Ok so I worked out how to get into recovery mode. Turns out I was doing it wrong! I used an external USB drive to access recovery mode.
    I ran disk utility which identified and fixed some errors on the HD. I thought this might solve the problem but when I restarted the same problem occurred. I then restored my time machine backup which thankfully worked.
    I tried installing mavericks again! Upon restarting and completing the install, I got the message 'OSX has been installed. Your computer will now restart'. After the countdown had finished I got the beach ball which span eternally again, just like last time. After about 10 mins I did a hard reset and again OSX won't load.
    Lame...

  • I have OSX Lion, I want to download and install OSX Maverick, do I have to previously install Mountain Lion ?

    I have OSX Lion, I want to download and install OSX Maverick, do I have to previously install Mountain Lion ?
    Please help me !

    No, assuming your iMac can run Mavericks:
    OS X Mavericks supports the following Macs that are already running a minimum of Snow Leopard:
    iMac (Mid-2007 or later)
    MacBook (13-inch Aluminum, Late 2008), (13-inch, Early 2009 or later)
    MacBook Pro (13-inch, Mid-2009 or later), (15-inch, Mid/Late 2007 or later), (17-inch, Late 2007 or later)
    MacBook Air (Late 2008 or later)
    Mac Mini (Early 2009 or later)
    Mac Pro (Early 2008 or later)
    Xserve (Early 2009)

  • BEFORE INSTALLING OSX Mavericks, do I have to create a back up of all the contents on my Mac book pro or i just have to install it and everything stays without getting deleted.

    before installing osx mavericks, do i have to create a back up of all the stuff that i have on my mac book pro or can i just click install and everything stays without getting deleted.

    Never Ever do anything with an operating System without backing up first.
    While it is usual for a new OS to install with no loss of data, the time you do it without first backing up will most likely be the time that you wish you had backed up.
    In all of the updates and upgrades Apple distributes there is a recommendation to backup your data before installing.
    The easiest option is to get an external hdd if you do not already have one, plug it into the mac and follow the prompts to use the drive for Time Machine. Note that any data existing on the external hdd will be erased so use a new one or one that you are confident is ok to erase without a disaster ensuing.
    Also ensure that System Preferences -> Energy Saver has been set so the Computer Sleep is Never so that the backup will not be interrupted if this is the first backup or it is a long time since the last backup was done.

  • Remote printer is recognized but message says can't find printer?  It worked great before installing OSX Maverick

    Remote printer is recognized but message says can't find printer?  It worked great before installing OSX Maverick?

    Thank you for your response.
    Unfortunately I have already rebooted the router and that did not fix the problem. The weird thing is that the computer is connected to the network, it just won't connect to my computer. I have printed the network configuration page to confirm this, and it says the wireless signal is strong. 
    I have not changed anything at all recently in terms of routers, networks, etc. The printer stopped working completely randomly.
    Is there a part in the printer that like emits a signal which computers, phones, etc are supposed to detect? I don't know enough about the mechanics to really theorize about what is wrong, but it seems like that is the only thing that stopped working. 
    Do you have any other suggestions?

  • HT6114 I cannot log in to my AOL after installing OSX Mavericks

    Why can I cannot log into to my AOL account after installing OSX Mavericks?

    Try these in order testing your system after each to see if it's back to normal:
    1. a. Resetting your Mac's PRAM and NVRAM
        b. Intel-based Macs: Resetting the System Management Controller (SMC)
    2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
         Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
         COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the
         computer and after the chime press and hold down the OPTION key until the boot manager
         screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
         Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo).
    4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
    Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo).

  • Is anyone having trouble opening CS5 products (PS, AI, & In) after installing OSX Mavericks?

    I just installed OSX Mavericks and now cannot open CS5 Ps, Ai, or In.  I haven't found any information about known issues or any updates that should solve the problem. Your help is greatly appreciated, thank you.

    As it turns out, it was necessary to upgrade Java Runtime in order to open the applications.  It seems to be an issue with OSX rather than Creative Suite; the only dialogue to that effect appeared when I shut down the machine.  I haven't figured out why it didn't appear until then, but once it did it was simple to get the upgrade done and Voilá!

  • How do i get my windows phone to install OSx Maverick if my mute button doesn't turn my screen brightness up?

    How do i get my windows phone to install OSx Maverick if my mute button doesn't turn my screen brightness up?

    A little clarification, you're trying to install mavericks on your windows phone?

  • I am trying to download and install OSX Mavericks but everytime i input my Apple ID it keeps asking to review my account and then starts looking for credit card info, I do not have a credit card, also I thought OSX Mavericks was free, some help please.

    I am trying to download and install OSX Mavericks but everytime i input my Apple ID it keeps asking to review my account and then starts looking for credit card info, I do not have a credit card, also I thought OSX Mavericks was free, some help please.

    Yes I know it's free, but Im trying to find out how to download it and install, but I keep getting account review and asked for CC details as I have no CC I can't get the download or install it, any help please, what i don't understand is why would I be asked for CC details if it is a free download ?? i just want to know is there anything I can do.

  • Is there any way to install OSX Mountain Lion to a MacBook Late 2007

    hey i was just wondering is there was any way to install OSX mountain lion to a macbook late 2007. ive gottan it before to point where i was about to boot up into the software but on the boot screen i got a stop sign. please help me if you can. thank you

    i just ran the follw=owing command on mac
    ioreg -l -p IODeviceTree | grep firmware-abi
    and the resond i got was
    "firmware-abi" = <"EFI64">
    so what does this mean

  • Question:  installing osx maverick and it has stalled midway.  How do i get it to continue installation?

    Question:  Am installing OSX Maverick, and installation has stalled midway through.  How do I get it to complete the installation ? Tks.

    http://www.apple.com/support/mac/app-store/contact/

Maybe you are looking for

  • RAID-5 configuration and performance

    Hi, About three years ago, we had a disk drive fail so after the long delayed, repair, I reconfigured the data disk drives into one RAID-5 metadata drive: $ cat /etc/lvm/md.cf # metadevice configuration file # do not hand edit d45 -r c1t1d0s0 c1t2d0s

  • How to Show Partial SSN in a Text Field

    Hi, I have text field on an apex page which takes SSN as input. How to show only last four digits of SSN after it has been entered. For Instance when I type 111-222-3333 and hit enter or tab, it should appear as XXX-XXX-3333. Thanks in Advance. Yogi

  • Ref: NON PO INVOICE

    Hi experts what is the non PO vendor invoice how can we create non PO vendor invoice in SAP? could you please tell me...

  • Functions in iView parameters

    Hi For a transaction iView, i can pass lastname as parameter to iview using the syntax lastname=<User.lastname> similarly, my portal users loginid consists of 10 characters. i want to pass the last 8 characters of loginif  as parameter to iview. is i

  • Resetting ActionForm

    Hi all, First of all i had lot of trouble searching for this topic (if anyone as posted this topic already or not?). Anyways i have two forms "emp.jsp" and "empconform.jsp", what is happening is in "empconform.jsp" you can save data to Database or if