Cant install photoshop on 2nd computer from the same adobe id with team plan

Our company has a team plan and I was recently added to the plan. I installed photoshop and illustrator on one computer but I want to install on a 2nd company laptop. But when I am logging in with the company email in the 2nd computer it says install photoshop and illustrator but after install it says start trial. How to solve this issue?

Hello, sidd91tan.
Could you please navigate to:
Gear Icon in Creative Cloud Application > Preferences > Account > Log Out and then log-out. Next could you please log-in again using the CCTeams e-mail? ( Same e-mail as the invitation was send to you )
Please make sure your using the same AdobeID as you CC for Teams.

Similar Messages

  • Can install photoshop on my tablet using the same subscription from the one i have for my computer?

    i have photoshop on my laptop and i have just obtained an 8in tablet. could i intstall the same photoshopcc on this tablet without having to buy another licence for it?

    Your CC subscription allows for installation on two machines.  If your tablet happens to meet the system requirements for the software then there is a chance you can install it there.

  • Im installing photoshop on my computer but the update is stuck at 81%

    yes just like the heading states its been stuck on 81% since last night.

    terminate the update.
    check your version of ps.

  • How can I easily manage different libraries of music between my iPad and my iPhone from the same computer?

    My 32 GB iPad stores much more data than my 16 GB iPhone... clearly. But I want to be able to easily sync these two seperate devices with two different sets of music from my iTunes. As it stands now, my iPad will always have the same amount of music as my iPhone because my iPhone is maxed out and the two devices are synced on the same computer from the same library. Do you understand where I'm coming from? Let me know if you need clarification.
    I want to be able to have my iPhone filled with individual songs, whereas my iPad would have the full albums. There doesn't seem to be an efficient way to do this with one computer. Any suggestions would be great. Thanks.

    It can be done very easily actually. I do it with three different iDevices.
    Connect the iDevice to your PC and launch iTunes. Select the iDevice from the left sidebar of the iTunes window. Then click on the Music Tab. Select only the music that you want on that particular iDevice and then sync the device with those selections.
    Do the same thing with the other iDevice. When you sync with iTunes the next time, iTunes will remember the music that was synced to that device.
    Make sure that you uncheck Sync Entire Music Library and check Sync Selected playlists, albums, etc and then select all of the music for each device.
    When you make changes to the current configuartion on the iPad - you will have to click on Apply in the lower right corner of the iTunes window.

  • I have a new computer  am trying to install photoshop elements 5.0 on the new machine need reg-id

    how cab I find my registration id... I have the cd and the booklet, but not the original case... is it viewable in the old machine?

    Jeff, Thanks for the reply.  I don't have proof of purchase.. all I kept was the two cd's and the instruction book.I bought it in June of 2008, and don't think I have bank records that far back.I was hoping I could get the information from my installed copy.. there a long number on the bottom rightwhen I open it, but that didn't work and a number etched on the back of the cd... but it too didn't work....
    Date: Tue, 29 Nov 2011 17:55:13 -0700
    From: [email protected]
    To: [email protected]
    Subject: I have a new computer  am trying to install photoshop elements 5.0 on the new machine need reg-id
        Re: I have a new computer  am trying to install photoshop elements 5.0 on the new machine need reg-id
        created by Jeff A Wright in Downloading, Installing, Setting Up - View the full discussion
    It is not viewable on your old computer.  We may be able to get you a replacement serial number.  Do you still have your proof of purchase for Photoshop Elements 5?
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4053519#4053519
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4053519#4053519. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Forums
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Install photoshop on another computer when i have lost the computer

    I have Photoshop Elements 9 and I have installed it on two computers but one of them is not available, I can't reach it. So how can I get back my license from that computer when I don't have the computer with me? I want to install Photoshop on another computer.

    Please see this thread
    http://forums.adobe.com/thread/1146239?tstart=0

  • The description for Event ID 0 from source VSTTExecution cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.

    Hi,
    Can any one help me on the below issue ?
    while executing automated test case in test center it is showing as test case is in progress, then i navigated to virtual machine (where the test agent is online), there Internet
    explore has opened automatically and my test case execution started, but with in a seconds IE has closed . However, in test center, test case status is showing as in
    progress, after  2 or 3 min  some of  test cases getting passed and some are failed.
    Here my question is in lab center-->virtual machine, IE has opened automatically and navigated the 2 or 3  links and with in seconds IE has getting closed. Why IE is getting closed without completing execution?
    Error Message :
    The description for Event ID 0 from source VSTTExecution cannot be found. Either the component that raises this event is not installed on your local computer or the
    installation is corrupted. You can install or repair the component on the local computer.
    If the event originated on another computer, the display information had to be saved with the event.
    The following information was included with the event: 
    (mtm.exe, PID 5240, Thread 4) FileAggregatorSessionInfo: Error occurred while deleting temporary directoryException: System.IO.DirectoryNotFoundException: Could not find a part of the path 
       at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
       at System.IO.Directory.Delete(String fullPath, String userPath, Boolean recursive, Boolean checkHost)
       at Microsoft.VisualStudio.TestTools.Execution.Aggregation.FileAggregator.FileAggregatorSessionInfo.DeleteTemporaryDirectory(String temporaryDirectory)
    the message resource is present but the message is not found in the string/message table
    Thanks
    Suresh
    Suresh

    Hi,
    Can any one help me on the below issue ?
    while executing automated test case in test center it is showing as test case is in progress, then i navigated to virtual machine (where the test agent is online), there Internet
    explore has opened automatically and my test case execution started, but with in a seconds IE has closed . However, in test center, test case status is showing as in
    progress, after  2 or 3 min  some of  test cases getting passed and some are failed.
    Here my question is in lab center-->virtual machine, IE has opened automatically and navigated the 2 or 3  links and with in seconds IE has getting closed. Why IE is getting closed without completing execution?
    Error Message :
    The description for Event ID 0
    from source VSTTExecution cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
    If the event originated on another computer, the display information had to be saved with the event.
    The following information was included with the event: 
    (mtm.exe, PID 5240, Thread 4) FileAggregatorSessionInfo: Error occurred while deleting temporary directoryException: System.IO.DirectoryNotFoundException:
    Could not find a part of the path 
       at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
       at System.IO.Directory.Delete(String fullPath, String userPath, Boolean recursive, Boolean checkHost)
       at Microsoft.VisualStudio.TestTools.Execution.Aggregation.FileAggregator.FileAggregatorSessionInfo.DeleteTemporaryDirectory(String
    temporaryDirectory)
    the message resource is present but the message is not found in the string/message table
    We are using VS 2013 (premium) and IE 10.0,  scripts have been created on the same versions. It is working fine  on
    developers command prompt but the same tests are getting failed in lab center test agent machine
    test agent log:
    QTAgentService.exe, AgentService: calling AgentObject.RunEndFileCopyComplete
    QTAgentService.exe, AgentProcessManager.WaitForDataCollectionAgentProcessToStart: waiting for agents to start.
    QTAgentService.exe, AgentProcessManager.WaitForDataCollectionAgentProcessToStart: Agents started.
    QTAgentService.exe, AgentProcessManager.PerformActionIgnoringExceptions: Successfully called 'Cleanup' on the test agent
    QTAgentService.exe, AgentProcessManager.PerformActionIgnoringExceptions: Calling 'StopDataCollection(int)' on the data collection agent
    QTAgentService.exe, AgentProcessManager.IsDataCollectionAgentNeeded: IsExecutedOutOfProc? True
    QTAgentService.exe, AgentPro
    QTAgentService.exe, AgentProcessManager.WaitForDataCollectionAgentProcessToStart: Agents started.
    QTAgentService.exe, AgentService: Connection to controller is up.
    Thanks
    Suresh

  • I have iWork 09 with a family license. I am unable to install the software on my new Macbook Pro (the message is simply "Installation failed"). I wonder if I need to remove an old computer from the family license, and if so, how?

    I have iWork 09 with a family license. I am unable to install the software on my new Macbook Pro (the message is simply "Installation failed"). I wonder if I need to remove an old computer from the family license, and if so, how?

    Yes, gladly. I am trying to install on a 13" MacBook Pro with OS X 10.8.3. I insert the disk into the SuperDrive. The I work '09 window pops up with two icons: one Tim install and one that says "Read before you install iWork." I double-click on the "Install iWork '09" icon, and a window appears that says, "This package will run a program to determine if the software can be installed." I click "continue" and see "Welcome to the iWork '09 installer." I click on "Continue." The "read me" bullet on the left lights up, and I see "Read before you install. . . ." I click "Continue," then see the software license agreement. When I click on "Continue" again, I am asked to agree, and I do. The window then says, "Standard Install on 'Mackintosh HD" and indicates how much space the program will take.
    I click "Install," enter my password, and the installation begins. It goes through a validating phase and begins "writing files." It indicates that installation will take about 30 minutes (although that number fluctuates). After about four minutes it goes to "cleaning up." Then after just a few seconds, the "Summary" bullet on the left lights up and this message appears: "There were errors with the installation. You may want to try installing again." There is a large yellow triangle with an exclamation point in it, and a bold "The installation failed." Below that appears "The installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance."
    At that point, a "Close" button is pulsating blue at the bottom of the window.
    Sorry for the tedious detail. Anything revealing there?
    Thanks!

  • When i plug in my new ipad, in my windows 7 computer. It tells me to remove Itunes and install the 64-bit version. but it is the 64 bit. version i have installed. i tried it 3 times now. I downloadet from the Apple support site, with 64bit.?? help

    When i plug in my new ipad, in my windows 7 computer. It tells me to remove Itunes and install the 64-bit version. but it is the 64 bit. version i have installed. i tried it 3 times now. I downloadet from the Apple support site, with 64bit.?? help

    did you solve this problem?

  • Mac OSX 10.6.8 running Photoshop CS5. My hard drive went belly up. Installed a new one and then tried to install Photoshop from my backup. I get an error message 6 telling me to uninstall Photoshop and then reinstall from the original software. But I boug

    Mac OSX 10.6.8 running Photoshop CS5. My hard drive went belly up. Installed a new one and then tried to install Photoshop from my backup. I get an error message 6 telling me to uninstall Photoshop and then reinstall from the original software. But I bought from Adobe online. How do I go about this?

    Yes, the Old Master file has a folder for each year where I find all photos from that specific year. I am attaching a screen shot of the file.
    In the meantime i have managed to download all photos (it did not download any video files though in mpg, avi, 3gp, m4v,mp4 and mov format) to a new iphoto library. Unfortunately the photos are quite mixed and often doubled up. I ma considering to purchase iphoto library which checks all duplicates in iphoto. this will save me a lot of time. What do you think?

  • TS1717 My itunes won't open - it says: 'The program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem' I have tried un-installing then re-installing itunes and I still get the same message??

    My itunes won't open - it says: 'The program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem' I have tried un-installing then re-installing itunes and I still get the same message?? Can anyone help?

    I have the exact same problem.
    I have uninstalled the program, rebooted and downloaded the update again. Same problem, same message.
    Please, where is that missing MSVCR80.dll? I don't remember misplacing it.
    I'm a Windows 7 user.

  • I have 4 computers running Adobe CC under two different accounts (as 1 account can only be installed on two computers) i need it on a 5th computer now, do i need another account or can i set up something so all 5 run from the same account making it easier

    I have 4 computers running Adobe CC under two different accounts (as 1 account can only be installed on two computers) i need it on a 5th computer now, do i need another account or can i set up something so all 5 run from the same account making it easier?

    Check into a Team account
    -http://www.adobe.com/products/creativecloud/teams/benefits.html
    -assign a new team member http://forums.adobe.com/thread/1460939?tstart=0 may help
    -Team Installer http://forums.adobe.com/thread/1363686?tstart=0

  • I cannot sync my iphone music, i had used my i phone on another pc, now when i bought a song on this computer from the apple store, i have just been sent an email that says Your Apple ID, was just used to purchase "" by a computer or device not prev assoc

    i cannot sync my iphone music, i had used my i phone on another pc, which died.  Ive managed to save the hard drive and transfer stuff across. I ended up smashing my phone and could update all other stuff on restore but cant sync any music.  It is all grey at the top of the screen.  Ive re installed itunes and cleared all phone data. Now when i bought a song on this computer from the apple store, i have just been sent an email that says Your Apple ID, was just used to purchase (a song ) by a computer that had not been previously associated with that apple id.  So do i have to tell apple now somehow i am using itunes on this pc, and if so how? Because i authorised it and it said this pc was one of 5 aujthorised.  if anyone can be of assistance then great!

    I'm having a similar problem.  I had previously (over a year ago) purchased 2 episodes of Law & Order.  Then about 2 months ago, I purchased the 3rd season of Sons of Anarchy.  When I downloaded these episodes to my iPad, about a dozen full seasons of various shows popped up, too.  No money was removed from my iTunes account & theses particular shows aren't in my iTunes library on my desktop.  I've tried every which way to delete them from my ipad, but can't.  I went to the Apple store & they suggested I contact expresslane.apple.com for help.  I submitted my problem, via email Friday, as they asked, but have not received any response.  Any suggestions on how to get rid of these "phantoms?".

  • I installed Photoshop CC (2014) yesterday through the Creative Cloud app. Now, when in Lightroom when I go to "edit in"and select Photoshop CC (2014) and click on "edit copy with Lightroom adjustments",  it opens Photoshop CC (2014) but my photo doesn't s

    I installed Photoshop CC (2014) yesterday through the Creative Cloud app. Now, when in Lightroom when I go to "edit in"and select Photoshop CC (2014) and click on "edit copy with Lightroom adjustments",  it opens Photoshop CC (2014) but my photo doesn't show up?  My photo does show up when I click on "edit copy" or "edit original".
    How can I correct that so that I can open up a photo from Lightroom WITH the Lightroom adjustments? Thanks!

    I'm having a similar problem, but only with jpg's. I have PS CS6, CC, and CC 2014. Other image file formats function normally with regard to the "open with" list. PS CC 2014 appears on the list. But with jpg's only PS CC appears on the "open with" list and 2014 can't be added by the browsing for it.
    The curious thing is that if I have any of the three versions of Photoshop open, click on Photoshop CC in the "open with" list, the image opens in whatever version is already open on my computer. This is true of all image formats. No matter which version I pick from the "open with" list it opens in the currently running program. I use only the latest version so keeping it open all the time is an easy work around. I won't uninstall any of the earlier versions lest more file association quirks result. it would be nice to have this matter fixed.

  • Why does Photoshop display colors differently from the other applications even in sRGB mode ?

    Hello all !
    Here is my problem :
    Photoshop is set to use sRGB workspace (in edit/colors.../workspace/RVB).
    If I understand correctly this is how all native windows applications work.
    This means Photoshop and the other applications should display the same colors on a file with a sRGB profile.
    Now this is the case until I calibrate my monitor.
    When I do, Photoshop colors become different from the other applications (irfanview, explorer, browsers...).
    The only way I found to let everything display the same colors is to set Photoshop to use Proofing/RVB Monitor.
    What upsets me even more is that Photoshop colors look "better" to me (dark grays seem to dark to me in the other applications.)
    I have read that this is because Photoshop takes the new profile into account and others applications do not. But I don't think this is relevant here because everything is in sRGB so the only profile is my monitor's and I think calibration is handled globally by windows : everything (including browsers, explorer, and Photoshop) changes color if I choose to apply the monitor's profile or not with windows color management tool ("use my parameters for this device").
    Here is my system configuration :
    - Photoshop CS4 (11.0.2)
    - Windows 7 64 bits
    - HP ZR2440W and DELL 2209WA (these are not wide gamut screens)
    I have spent two days trying to figure the logics behind this and really am upset. Any help would be greatly appreciated. Don't hesitate to ask me if there is something that is unclear or some information I forgot to mention.
    Thanks in advance,
    Yannick

    That sounds like an invitation to continue to talk about the issue.  Fair enough.
    I'm not sure where you're getting "insecurity"...  I am just trying to help you help others more effectively.
    I invite you to re-read just the first sentence of what you wrote very carefully, putting yourself in the shoes of someone struggling with both the terminology and the concepts:
    Photoshop (CMS) reads an embedded ICC profile and CONVERTS it to the custom monitor profile for a theoretical 'true color' display
    Think about what "Photoshop (CMS)" might mean to a person who doesn't know the acronym might stand for "Color Management System" (which is I assume what you meant).  Adobe themselves don't call it "CMS", they use the acronym "CMM" (Color Management Module).  The term "CMS" is used in the computer industry for about a dozen different things.
    While a color profile might have been embedded in an image file before it was opened by Photoshop, Photoshop works on documents.  A profile is not "embedded" in a document, it is maintained by Photoshop with the document and describes the color values in the document.  If Photoshop opens a document without an embedded profile, depending on settings and user choices it might assign a profile or it might even operate on the document without color-management.  Oversimplification doesn't help people when they're trying to learn new things unless it's described as such, for example, "This is a bit of an oversimplification..." or "Generally speaking..."
    Not every monitor profile is a "custom monitor profile".  Quite often a standard profile (e.g., sRGB IEC61966-2.1) is associated with a monitor by the operating system as a default, or a factory profile is installed by a driver package or system update.  Your use of the term "custom" is a bit ambiguous and could be read as implying the creation of a profile using a calibration and profiling device specific to the particular monitor.
    Photoshop's color management code does not convert an embedded ICC profile at all (read carefully what you wrote).  As I said, it transforms color values.  That was the key error in your description that prompted me to comment.
    If ever there is a time to pick words carefully, it's in a color-management discussion.
    -Noel

Maybe you are looking for