Cant install windows with 2 hard drives attached

i have an sata drive that i use for boot drive and ata for back up. i can not install windows on the sata drive if the ata drive is hooked up. windows only sees the ata drive. it will not give me a choice to install on the sata. if i unhook the ata i can install just fine on the sata. does anyone have any ideas why?
it's like when i have windows installed on the sata drive, then the windows xp pro cd does see it and lets me install on that drive only, it won't let me choose sata or ata. but if there is no OS installed on anything it only goes to the ata drive. i only want to install windows on the sata drive and do not want to keep unhooking my ata drive constantly when i reinstall windows on the sata.
can someone please help?

Danny you don't have to stay out, I just already said stuff and you told me to do something i already said i did.
Here is my current settings to get it to show my ata drive in windows and i boot from the sata cus windows is on it. currently when i install windows if no OS is on either drive it will auto install on the ata and i don't want that. i want to have a choice what drive and where to install on which means i would always install on the sata drive. but it just installs on the ata not giving me a choice. if windows is installed on the sata already then it will offer me that drive only and not allow me to select the ata. when i do a complete reformat reinstall i must unhook the ata drive and then it will work on the sata drive.
on chip ata mode - legacy
ata config- sata only
sata keep enabled - yes - greyed out. i had to mess with other native or something mode and change it to yes in order to get it like this and work for me. why?
pata keep enabled - yes- adjustable
pata channel selection - both
combined mode option - pata 1st channel - greyed out
sata ports definition - p0-1st./p1-2nd. adjustable
config sata as raid - no, greyed out.
is this a weird set up? and exactly how do i get it so i never have to unhook my ata drive again?
each drive they are all on their own channels. ata by itself, dvdrw by itself and sata by itself. all master.

Similar Messages

Cant install windows with bootcamp only BSoD

yesterday i install mountain lion on my mbp late 2011 and cant install windows with bootcamp now i only became BSoD.
can anyone help me?

Post in the Boot Camp forum:
https://discussions.apple.com/community/windows_software/boot_camp

Cant install windows with boot camp

I had a new hard drive put in my moms macbook. I had the old drive cloned and then put on the larger hard drive. I want to install Windows in bootcamp, I did this before on the old hard drive with no problem. Now when I try and run bootcamp I get this message:
[IMG]http://i80.photobucket.com/albums/j164/wonderings/Picture1abc.png[/IMG]
I went into disk utilities to see how the hard drive was formated and it appears to be extended (journaled):
[IMG]http://i80.photobucket.com/albums/j164/wonderings/Picture2abc.png[/IMG]
I am a bit confused as to what to do now, the first time I had no problems at all. Any help would be appreciated.
this is running Leopard with the latest updates.
Thanks

It has to be formatted using GUID - your second shot shows "Apple Partition Map" (APM) instead which won't work.

Can I install Aperture on an Iomega hard drive attached to my IMac and use it from there with iPhoto pix on the IMaac

Can I install Aperture on an external Ilmega hard drive attached to my IMac and run Aperture from there to use it with photos on my IMac iPhoto library?

It's usually best to have applications on the boot drive, so I'd turn your idea around: run Aperture from the internal disk and park iPhoto and maybe iTunes libraries on an external - which would free up space on the internal.

I just had to install a new hard drive, windows 7,itunes and outlooks 2010 on laptop and want to import contacts, calendars and photos. it seems sync wants to wipe out my phone with whats on the computer unidirectionally. whats the fix?

Hi guys newbie here. My HP laptop crashed and i had to install a new hard drive, windows 7, outlook, itunes, etc. i need to get my contacts, calendars and photos off the phone and into Outlook and My Pictures. Syncing seems unidirectional PC -> iphone and i think wants to wipe out the iphone 4s with whats on the laptop - which is nothing. Need help to do this right...

-Me again - it also won't upload the few new pictures I have on the computer onto the iPad without deleting all the photos that are already there....

Won't boot up with external hard drive attached

Pavillion HPE h8-1360t, AMI 7.15 Bios, Windows 7 Home Premium x64 bit, consistently fails to boot with external USB hard drive attached (WD 500GB MyBook) attached. Have tried disabling the device in BIOS, htting f10 to apply the change and then selecting "save changes and exit", but after shutdown/powerup the BIOS returns to the old setting. Read the posting that states a BIOS upgrade will solve the problem but Support web page shows no BIOS update available. Any suggestions greatly appreciated.

2Suntech,
Open up command prompt and run the following command SFC /scannow.
This will scan the system files and correct any errors that it can.
Here is a link to command prompt.
When you go to open command prompt, right click and run as administrator.
If it has not been to long since the problem started, you can run a system restore.
This will take the system back to when everything was working correctly without affecting your personal files.
Here is a link on how to do a restore.
Let me know how everything goes.

HT1553 I did the back up as instructed... Installed a larger hard drive and followed the restore instructions... Now I get a white screen with a folder icon and blinking question mark. When trying to set startup with new drive I get a bless tool error...

I did the back up as instructed... Installed a larger hard drive and followed the restore instructions... Now I get a white screen with a folder icon and blinking question mark. When trying to set startup with new drive I get a bless tool error... Help!!

If you have installed a new hard drive , you will need to have formatted it in Disk Utility correctly. This may explain your problem.
Boot into your 10.6 Install disk again at the top menubar > Utilities > select Disk utility and in there select your new hard drive, and select the tab Erase and choose to make the format as Mac OS Extended Journaled. When that is finished look in the main window to make sure that the partition map scheme says GUID Partition Table.
Now go to the Restore tab and reinstall from your backup.

I tried to install a new hard drive using Snow Leopard to back up with Time Machine. When I installed the new HD I installed Leopard (10.5) on it and tried to use time machine to restore the backup I had made using 10.6. Kernel panic screen occurred.

I backed up my system using 10.6 Snow Leopard's Time Machine to an external hard drive. I did this because I purchased a new internal hard drive to upgrade my 2007 White Macbook from 80GB to 320GB. When I installed the new hard drive, I installed 10.4 (Tiger) and then 10.5 (Leopard) and once Leopard was in I tried to use Time Machine to restore my backup from 10.6 (Snow Leopard) and received a kernal panic screen directly after the bootup.
The screen had code asking for 10.6, so does this mean that the computer is searching for Snow Leopard? If so, how can I do this? Will a bootable drive with Snow Leopard on it be able to solve the issue or will I somehow need to find a way to wipe out this new hard drive?
-Steve

Booting From Snow Leopard Installer Disc
1. Insert Snow Leopard Installer Disc into the optical drive.
2. Restart the computer.
3. Immediately after the chime press and hold down the "C" key.
4. Release the key when the spinning gear below the dark gray Apple logo appears.
5. Wait for installer to finish loading.
Drive Preparation and Installation
1. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
7. After formatting is complete quit DU and return to the installer. Install Snow Leopard.

My laptop harddrive crashed. I have installed a new hard drive. I want to retreive all Firefox bookmarks and History. Is it possible? I use windows XP

I use a Windows XP Laptop and Firefox browser ( free don't remember the version). My hard drive crashed today 31.07.2011 and I installed a new hard drive with installed Windows XP. I have just downloaded Firefox 5.0.1 ( free version) and would like to retrieve all by previous bookmarks and HISTORY.

https://support.mozilla.com/en-US/kb/Recovering+important+data+from+an+old+profile
Your old Profile is located here in Win XP and W2K: <br />
''drive'':\Documents and Settings\''Windows login user name''\Application Data\Mozilla\Firefox\Profiles\''profile_name''

I see that i have a problem after installing my new hard drive on my macbook pro mid 2009 version. I put a new hard drive, with all of my information from my old drive installed on it, into the computer. but now have the blinking question mark folder

i see that i have a problem after installing my new hard drive on my macbook pro mid 2009 version. I put a new hard drive, with all of my information from my old drive installed on it, into the computer. but now have the blinking question mark folder. I see that it means that it isn't reading the new hard drive.
did i miss a step between transferring all of my information from my old hard drive to the new hard drive and installing the new hard drive into the computer. I believe that i installed properly. it was quite easy.
thanks for your help

It means there is no bootable system on the drive. If you still have access to the old drive, then I suggest you boot from it then clone it to the new internal drive. Use OPTION boot to boot from the Recovery HD on the old drive:
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
     1. Select Disk Utility from the main menu then press the Continue
         button.
     2. Select the destination volume from the left side list.
     3. Click on the Restore tab in the DU main window.
     4. Select the destination volume from the left side list and drag it
         to the Destination entry field.
     5. Select the source volume from the left side list and drag it to
         the Source entry field.
     6. Double-check you got it right, then click on the Restore button.
Source means the external old drive. Destination means the new internal drive.

Help with CS3 on Windows 7 hard drive.

I have Photoshop CS3 on an XP hard drive. I have a Windows 7 hard drive now and cannot access Photoshop on the other hard drive and it won't let me install in on the new hard drive. Do I need a patch or something? It tells me to uninstall and install again, but it's on the other hard drive and I don't know how to uninstall it there and really need to get this installed again as I need to do a memorial brochure for a friend. Any help will be appreciated. Thank you.

You either have to reconnect the old drive as the C: drive and uninstall, well actually, deauthorize photoshop. then switch drives again.
Or
You can notify Adobe that you have more than 2 computers with photoshop installed (the old drive counts as a computer) you need then to reset your license.
Now I am assuming how photoshop was installed, If you already had 2 drives and installed on the second drive instead of the main drive and something went wrong so you can no longer access it. Thats another story.
Adobe has a cleaner app that can find photoshop and remove all traces of it for you, so you can resinstall it. I never used that app, so I can not give advice on how it works, but I have heard other recommend using it.

Solaris 10 01/06 hard crash with firewire drive attached

I have Solaris 10 01/06 installed on a Sun W2100z workstation (BIOS is most recent available when last I checked in March). I have applied all publically available Solaris 10 patches that one can get without having a support contract.
I have an external firewire hard drive attached to the system but it's not powered on.
If I halt the workstation, power on the firewire drive, and then attempt to boot the workstation, Solaris will begin to load and then I get a kernel panic and crash dump. This happens every time.
My "mdb" skills are lacking, but if I issue:
cd /var/crash/hostname
mdb unix.1 vmcore.1
I get:
Loading modules: [ unix krtld genunix specfs ufs ip sctp usba uhci s1394 nca random fcp fctl emlxs lofs nfs audiosup sppp crypto ]
$cscsa1394_cmd_fill_cdb_rbc+0x332()
scsa1394_cmd_fill_cdb+0x6f()
scsa1394_scsi_start+0xe4()
scsi_transport+0x60()
scsi_watch_thread+0x2fa()
Anyone else having repeatable crashes on Solaris 10 01/06 x86_64 with firewire hardware attached?
Thanks,
Tim

Hi Asgorath,
Unfortunately I do not have an answer for you but I
am experiencing the identical problem on a HP
Proliant BL25p Blade Server. Here is my hardware
config:
CPU - Dual Opteron 2.6 Single Core
Memory - 16gb
Controller - HP Smart Array 6i
Logical drives - 1 (2x72gb RAID1+0)
I have tried the same things as you and I still get
intermittant boots. Power on and off does not always
work as the system still hangs. It's totally hit or
miss. Once it soes boot it seems to work fine. I have
also installed the latest Solaris 10 for x86 Patch
Cluster in hopes that some of the kernal patches
would fix the problem. So far no luck as the system
continues to hang...HARD!! HP was out to my site
today and the Eng. is going back to the group that
qualified Solaris10 on the HP Blades and see if they
have any input. If I receive anything back I will
post it here. I know this post is late and if you
have resolved please post your fix.Hi doc42755,
I have not come up with a solution as of yet, if I do come up with a solution i will most certainly post it here.
However, if you find the solution could you let us know in this thread aswell.
Thanks
Asgaroth

HT3986 i purchased windows 7 from amazon and i just received it. they sent me windows 7 home premium "OEM System Builder Pack". the instructions say "Intended for system builders only". also says " must be per installed on the hard drive of a fully assemb

i purchased windows 7 from amazon and i just received it. they sent me windows 7 home premium "OEM System Builder Pack". the instructions say "Intended for system builders only". also says " must be per installed on the hard drive of a fully assembled computer system, using the OEM Preinstallation kit (OPK)."

System Builder - just be sure to get 64-bit version, no one needs or wants 32-bit today, and only comes with one, while retail ships with both 32/64-bit media.
you can't install it and activate on different hardware later is all, and by then for what you saved, so what, Windows 8 or SP2 will be out.
A few people had trouble with Windows 7 SP1 for some reason and not sure exactly why, changes to the boot loader on the DVD I presume.

I can't see hard drive attached to Airport extreme from Windows XP computer

I have a Windows XP computer on my network. I can no longer see the network hard drive attached to Airport Extreme from the XP computer. I can see it with all the MACs on my network and all the Windows 7 computers. I can connect to the internet with the Windows XP computer. I previously had no problem seeing the network hard drive attached to the airport extreme from the XP computer and one day it just disappeared. I have deleted and reinstalled Bonjour, not just Bonjour print services. I can print to a network printer that is not attached to the Airport Extreme. Help!

Well, I'm stumped. I spent an hour on the phone with Apple support-- they ran through the scenarios I had already been through, and they came up with nothing useful. I ended up taking a second 160gb HD that was formatted NTFS, and formatted if for HFS+. This drive was visible through Finder. I took the same drive, formatted it for FAT32 and, surprise, surprise, NOTHING VISIBLE.
The "just works" philosophy is OK, but it's bunk when it comes to network drive support. I'm doubting the wisdom of this purchase now.
$2500 for a computer that can't connect to a network drive that can be seen by an $500 Dell laptop?
The issue simply seems to be this: put a FAT32 drive on another box, and it can be shared by Macs and Windows boxes.
Put that same FAT32 box on an AirPort Express, and my Mac is BLIND. It can't see the drive.

Potential Driver Issues with OS Install on New Hard Drive?

I want to upgrade my laptop's hardrive, but my laptop did not come with recovery discs. I did purchase a full copy of Windows 7 Professional, but I have been saving it...for when all else fails, I suppose. Whether I am able to reinstall Win 7 Home or whether I have to install Win 7 Pro, how can I be sure to reinstall all the necessary HP drivers (e.g. trackpad, cool sense, beats audio, etc.) for my machine? Is it best to download the drivers prior to installing the new hard drive and have them ready on a flash drive; or is there an easier method? Thanks.
This question was solved.
View Solution.

Yes that is a very good question.
It's very much advised you do a HDD error check, hard drive test from BIOS and SFC scan lastly.
You can then undergo a disk cleanup and disk defragmentation of the HDD & then proceed with backing up or cloning tools.
I do back up regularly into my 2TB external drive using Macrium reflect, AOMEI back upper and also have all my latest drivers downloaded and copied to another USB along with another bootable USB with Windows OS ISO.
Note: I've already created my recovery media after I setup the laptop first time for additional safety.
Regards
Visruth
++Please click KUDOS / White thumb to say thanks
++Please click ACCEPT AS SOLUTION to help others, find this solution faster
**I'm a Volunteer, I do not work for HP**

Cant install windows with 2 hard drives attached

Similar Messages

Maybe you are looking for