Cant load printer software

i have a epson cx 4600, in pass printer worked fine, lately i was have a few glitches with os 10.4.9, so i re installed system soft ware back to 10.3.9 ever since i cant load printer i install software from original dick it installs fine , but when i go to set up new printer through printer utility the utility goes to open then closes. I tried this several times i even re-re-installed sytem software but still nothing. i even downloaded printer utility program that was posted on this forum but nothing. i need help. my next option is to get a new printer which i really dont want to do.

Hi Myron!
Try this procedure.
* Download the most current driver from Epson Stylus CX4600, Drivers & Downloads. Printer Driver v2.0cA for Macintosh OS X (v10.2.x - 10.3.x).
* Before moving the folder & files listed below, to a Temporary Epson Trash Folder, that you should create on the Desktop, open Printer Setup Utility, and delete the CX4600.
* Quit Printer Setup Utility
* If present, move the files (Posted in CAPITALIZED Italics), to the newly created Temporary Epson Trash Folder
HD > Applications >
EPSON PRINTER UTILITY (Alias)
HD > Users > Your Home > Library > Preferences >
COM.EPSON.IJPRINTER.UTILITY.PLIST
COM.APPLE.PRINT.CUSTOMPRESETS.PLIST
COM.APPLE.PRINT.PRINTCENTER.PLIST
COM.APPLE.PRINT.PRINTERPROXY.INTERNAL_MODEM.PLIST
COM.APPLE.PRINT.PRINTINGPREFS.PLIST
HD > Library > Printers >
EPSON (Folder) Only move this folder if you have no other
Epson products
I also had a Epson OS X booklet.pdf, that I had saved in my Documents folder. You will get a new one. After the installation, I replaced it. You may not have saved your original one. It's no big deal, there's really not much in it, In fact I don't remember the last time I opened it!
* Quit ALL running Applications
* Repair Permissions using Disk Utility in the Utilities folder
* Dig out your Epson CX4600 Start Here instruction quick sheet, for reference
* Unplug the USB cable from the Mac & then from the CX4600
* Re-attach the USB cable to the CX4600 & then to the Mac
* Turn on your CX4600
* Open the epson11111 folder
* Double-click the .dmg file to create a disk image with the product name on your desktop
* Open the disk image
* Follow the prompts & instructions
* When the Vise installer opens in a window, double click it to start the install
* When the installation is complete, turn off the printer & restart your Mac.
* Repair Permisions again
* Turn on the CX4600
* Open Printer Setup Utility
* You have no printers available will appear. Click Add
* Select Epson USB in the contextual menu
* Click on CX4600 to highlight
* Add Page Setup: select All, from the contextual menu
* Click Add
* Quit Printer Setup Utility
The images that are left on the Desktop, can be trashed, unless you prefer to keep the installer.
Good Luck!
ali b

Similar Messages

ISE reimage to 1.2, cant load install software

Hello
We have some ISE 3355 servers ready to configure, out of the box, and we want to upgrade them to version 1.2 before configuring them. I got the iso image for 1.2 but Im having problems with the reimage process.
I have been able to run the reimage process on 2 out of 4 devices, but at this moment, the reimage process gets stuck after I choose the boot optios trying to load the initrd.img file...
boot: 1
loading vmlinuz.............................................................
Loading initrd.img..........................................................
Did have the same problem with the second device, but after letting it start all the way down without booting with the dvd and running the setup program, I was able to reboot, boot from the ISE 1.2 dvd and load the reimage process...
Am I doing something wrong?... the reimage link doesnt provide any help... and its the same thing I´ve been doing...
http://www.cisco.com/en/US/docs/security/ise/1.2/installation_guide/ise_installing_on_NAC-AC.html#wp1197454
Any help is much appreciated!

Hello Alejandro
If you do not have access to this DVD, you can download the Cisco ISE Release 1.2 software
from the Cisco Software Download Site at:
http://www.cisco.com/public/sw-center/index.shtml.
You will be required to provide your Cisco.com credentials.
When the Cisco Identity Services Engine ISE VM Appliance (ISE Software Version 1.2.0.xxx) DVD
boots, the console displays:
Welcome to Cisco ISE
To boot from the hard disk press
Available boot options:
[1] Cisco Identity Services Engine Installation (Monitor/Keyboard)
[2] Cisco Identity Services Engine Installation (Serial Console)
[3] Reset Administrator Password (Keyboard/Monitor)
[4] Reset Administrator Password (Serial Console)
Boot from hard disk
Please enter boot option and press .
boot: 1
You can choose either the monitor and keyboard port, or the console port to perform the initial setup.
At the system prompt, type 1 to choose a monitor and keyboard port, or type 2 to choose a console port,
and press Enter.
This starts the installation of the Cisco ISE software on the VMware system.
For more information this link will definitely be helpful to you.
http://www.cisco.com/en/US/docs/security/ise/1.2/upgrade_guide/b_ise_upgrade_guide_chapter_01.html

RPC server unavailable error message when trying to load printer software (hpd1300inkjet), winxp

When I try to load the sofware this is the error.
I would imagine this would occur w/any printer--so its not specific to the inkjet that I have.

Check that the Remote Procedure Call (RPC) service is running:
Control Panel - Administrative Tools - Services
Find Remote Procedure Call (RPC)
Right click on the service, then select Properties
Check the Service status: it should read Started
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

I have a macbook pro and aphotosmartD110 wireless printer. I was told that if I install the printer software on my computer, it will no longer print wirelessly. Is that true and how do I scan wirelessly without loading in the software?

I have a macbook pro and a photosmart D110 printer. I was told that if I load the software for the printer onto my mac that it will no longer print wierlessly. Is that true and how can I scan wirelessly without loading the software? Also, can I just connect my mac to the printer with a cable and scan or do I need that software loaded onto the mac? Thanks for all help!

If you are running Lion then all drivers are distributed through Software Update. You do not need to install anything, other than to install the printer in System Preferences > Print & Scan. If you already added the printer while it was connected using USB, you might want to delete it and set it up again wirelessly to avoid confusion. Or, give them two distinct names e.g. "Photosmart D110 (USB)" and "Photosmart D110 (wireless)".
All scanning functions are now performed using Preview, but you can also access the scanner through the same Print & Scan preference pane, or with Image Capture.
This HP document may help explain how driver software is distributed now:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03079365&cc=us&dlc=en&lc=en &product=4144493&tmp_track_link=ot_search#N108

I have loaded the software for my new printer but am unable to get eprint to work properly. the prin

I have a new HP deskjet 3070A printer which I have loaded the software as per the disc that came with the printer but I am unable to get the printer to print emails
Presumably something is wrong with the ePrint set up.
I operate Windows Vista

Hi there keb71,
Sorry you are having trouble setting up and using ePrint. This link should be able to help you:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02728147&tmp_task=useCategory&cc=us&dlc=en&jump...=
If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

I have macbook pro w existing iPhoto library. Now have Canon printer and loaded Canon software for same. Cannot access iPhoto library from Canon software, but prints fine from iPhoto. How can I use iPhoto library w Canon software?

I have a macbook pro w exisitng iPhoto library. I now have Canon printer and loaded Canon software for same. I cannot access iPhoto library for use from Canon software. I can print from iPhoto directly to new printer without problem. How can I use iPhoto library with Canon software? I would like to try the software to see which I prefer...

Simply export some photos from iPhoto to a folder on the desktop and experiment.
Without telling us even what this program is, not to mind what it does, that's the best anyone can suggest.
Regards
TD

Cant load photo black ink cartridge into HP 5520 printer

Hi there,
Cant load photo black ink cartridge into HP 5520 printer.

Hi,
The Photo ink cartridge is not intended for the Photosmart 5520, the printer uses Black, Cyan, Magenta and Yellow ink cartridges as listed below as an example (The same applies for the US with the 564 ink cartridges):
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03340400&tmp_task=prodinfoCategory&cc=uk&dlc=en...
As you may find below as an example, the Photo Ink Cartridge only intended for printers which use 5 ink cartridges:
ONLY for 5-cartridge printers which use Black, Photo, Cyan, Magenta, and Yellow inks
Does NOT replace Black ink cartridge
http://store.hp.com/webapp/wcs/stores/servlet/PDPStdView?catalogId=10051&productId=502407&storeId=10...
Please let me know if I may misunderstood your intention,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Trying to load HP printer software onto Macbook Pro...

Hi all. I am trying to install HP printer software on my Macbook Pro thats running Windows 7 (I'm booting into Windows from Boot Camp). During the install process, I keep getting an error message that something is wrong with my USB drivers and USB software. The exact error messages are as follows:
1. "This computer does not have the necessary USB software support to allow completion of a USB installation. The installation cannot continue until this is resolved."
"Required Action: Click Cancel to exit this software installation. In order to install this as a USB device, please refer to your computer documentation or USB add-in card documentation for more information about USB drivers."
AND
2. "This computer does not have the necessary USB hardware support enabled to allow completion of a USB installation. The installation cannot continue until this is resolved."
"Required Action: Click Cancel to exit this software installation. In order to install this as a USB device, please refer to your computer documentation or USB add-in card documentation for more information. If you are sure your computer has the physical USB connectors, refer to documetation about how to enable USB in the BIOS."
HP support suggested I go into device manager and remove all USB drivers. I tried this with horrible results. First, I was unable to uninstall most of the USB drivers because my computer would freeze up during the uninstall and I'd have to reboot. Second, of the drivers I was able to uninstall, I would lose control of stuff like the trackpad and keyboard functionality. I explained all this to HP support and they said to contact Apple tech support for a proper "USB uninstall flow". So, here I am seeking dire assistance. Can anyone help?

HP Printer's software is suspect in relation to Lion (they told me that my HP Photosmart B89100 drivers would be Lion ready by it's release. Well, they probably got overrun by the counting all their leftover TabletOS door-stops, and forgot to make the drivers
Apple installs its own programs under Windows called Apple Software Update. If you go under Programs, you'll find it there. Try it out just to be sure.

Finger print software

How do I find my finger print software to register my finger print. I can see the driver is installed successfully but cant find the software itself to load and scan my finger for my files.
Secondly, my wifi is on but only showing bluetooth connection, is it the same as any other wifi connection? can I connect to any wifi around with my bluetooth connection?
Any advice will be appreciated

Hi,
by default the Fingerprint can work with some applications, but if you plan to use the Fingerprint with other applications, then I would suggest to install Client Security Solution (CSS).
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-73696
After you have installed also CSS, you need to enable CSS to work with FPR.
Here is a short introduction:
- start CSS
- on the left side click on "Fingerprint" and select "Manage" -> followi the on screen instructions and get the CSS configured with FPR
- after this is done open CSS again and go to "Password Manager"-> a new window will open and go toet Preferences->Set Preferences. A configuration window will open and make sure, that you enable it for all the apps that you can see there.
- once this is done open CSS again and go to Advanced->Manager Security policies->in this new window go through each option on the left side and make the appropriate changes to it.
For a detailed instructions and infomrations I would advice to read the CSS manual:
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/thinkvantage_en/css83dg_en.pdf
Let me know, if you have any specific questions.
In case this helps, you can mark this post as fixed .
Cheers

6500 and 5500 printers - do you need to load both software suites to scan?

Have a 5500 officejet with the HP Director software. Now adding a 6500 officejet with its HP Solution software. Cant the 6500 software run the 5500 printer's scan features as well as the 5500?? To load both software suites is a huge memory hog. Any solutions??

You'll need to installl both softwares, but the 6500 software will upgrade Director to Solution Center, and you scan from both printers using SOlution Center.
Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"
I am an ex-HP Employee.

Since I installed a printer software Satellite L300 has stopped working

Hello there!
I'm new here so not really sure if I'm posting in the right place. Mods, please feel free to move to the relevant section, thank you.
OK I have a Toshiba Satellite L300 Laptop and ever since I installed a printer software on Wednesday night, my laptop has suddenly stopped working!
Ever since Thursday night, I have been trying to get it working but I'm faced with this message:
when i load it up it goes to Windows error recovery:
'windows has failed to start.a recent hardware or software change might be the cause
if windows files have been damaged or configured incorrectly,startup repair can help diagnose and fix the problem.if power was interrupted during startup,choose start windows normally'
then it gives two options: Launch startup repair (recomended)
start windows normally
==========
-so i click launch startup repair (reccomended)
-then a scren loads up called 'system recovery options'.. it says: select an operating system to repair and click next.only windows vista operating systems are listed and can be repaired
if you do not see your operating system listed, click load drivers to load drivers for your hard disks'.....
but nothing comes up so i click load drivers and it just gives me loads of random folders...and i haven't a clue which ones to load
========
5 years ago Report Abuse
Additional Details
so i just click 'next'
========
then i have 5 options:
-startup repair
-system restore
-windows complete pc restore
-windows memory diagnostic tool
-command prompt
==========
startup repair says it cannot manually fix any problems
-system restore just says your computer is in a limited state and performing this action cannot be changed...but there is no option to do so
-windows comple pc restore says i need to insert a backup disk which I dont have
windows memory diagnostics tool says that windows is preventing this
============
but on the system resotre it tells me to type something like: rstrui.exe /OFFLINE:C:\Windows
but i don't know where...i typed it in the command prompt but don't understand how to use it
=========
i also tried to click start windows normally but it won't work

If the problem is installed software, start notebook in safe mode and try to start system restore from there.
Please let me know which options are available. Can you roll back OS few days back?
Are some restore points listed there?

HP Smart Web Printing Software

Is there a version of HP Smart Web Printing Software that will work with Internet Explorer 8.0? I upgraded from Internet Explorer 7.0 to 8.0 (using XP SP2), and my previous HP Web Site Add-On Version 2.15.7.0 was incompatible with IE 8.0, so I tried upgrading to HP Smart Web Printing Version 4.05. First I selected "Install Now" from the HP web site & thought the load was successful, but then I couldn't find it among installed programs on my PC. Then I selected "Download Only" from the web site, and ran the executable from my desktop, but it went into an uninstall mode and froze. I exited the program and selected the executable a 2nd time. It started to load but stopped, saying another install program was still in progress. I exited the program & rebooted the PC. I selected the executable for the 3rd time and the installation appeared to complete successfully. At least the application was listed among installed programs, but it does not appear anywhere on the IE toolbar, and I have not found any way to run the application. Is it even compatible with IE 8.0?

Gurnie wrote:
I am having the same problem! I'm NOT glad to see that someone else is having trouble too! I had IE 6 & downloaded a free offer of Smartwebprinting. I loved it! Then I got a message that said I should upgrade to IE 8 so, of course, I did! Then I was told that smart web printing is NOT compatible with IE 8! AFTER I downloaded it not before! I was very angry! Then today I find an upgrade for smart web printing so it would be compatible with IE 8. I was happy again! But, alas, it will not work! It asked if I wanted to replace the program I already had. I said 'yes'. Then when it tried to install....it UN-installed! I have written to HP twice with NO response! so I did uninstall the program, then downloaded the supposedly 'upgraded' version of smart web printing again. I am unable to find the program anywhere, I only have the 'exe' program. I don't know what to do from here?? I'm ready to go back to IE 6!
I've attached a screenshot of the SWP icon, so please check if you can see it. You may have to click on the '>>' button to see more buttons, and reveal the SWP button.
@Ronalds: It's not compatible with Vista 64-bit according to the specs, but try to install it anyways and see if it works.
Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"
I am an ex-HP Employee.
Attachments:
SWP.jpg ‏6 KB

Is there a way of locking a word document in ios mountain lion so that it cant be printed or changed?

Is there a way of locking a word document in mountain lion so it cant be printed or changed?

You can print because it's your document. Others shouldn't be able to. But then it's easy enough to unlock them altogether.
Easiest is to get encryption software and just encrypt the document. Or create a small encrypted disc image with Disk Utility and store the document in the disc image.

Snow leopard 10.6.8 wifi connected, cant load webpages

hi!
just yesterday my computer showed this problem with the internet. as the title says, it is connected to the wifi network (as it has always been) but i face the following problems:
i cant load new webpaged in google chrome and firefox (which are the ones that I actually use)
i can load webpsged that were already saved as bookmarks.
i can load webpages in safari
my icon for dropbox shows a red cross icon
utorrent works just fine
outlook (the software) get's my new emails
what i tried to solve it:
checked that my wifi networks work perfectly fine with other devices in the house
restart computer
changed DNS to one that was suggested in another thread in this discussions site
resetting NVRAM/PRAM
checked that it is updated
so, i read that some people had similar problems with the new 10.8.2 for mountain lion, or sth like that... but in my case i have snow leopard so i don't think thst's the problem

Hi, this has worked for a few...
Though all of these steps may or may not be needed, I'm including them all.
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.5, 10.6, 10.7 & 10.8…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
If using Wifi/Airport...
Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
For 10.5/10.6/10.7/10.8, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
208.67.222.222
208.67.220.220
(There may be better or faster DNS numbers in your area, but these should be a good test).
Click OK.

How to load dvd softwares on Ipad2 ?

Hi everyone, I have an Ipad 2 and I wonder how to load my Ilife 2011 (family) version into my Ipad2 ???
of course I am talking about Ilife version on DVD...
I hope I would not obliged to get a new licence from the applestore...

It will not work. iLife is for Mac OS but the ipad runs iOS. Different operating system. Think of it as one talking german and the other speaking chinese. The only way to load apps onto the ipad is via the appstore.
Its the same reason you cant run PC software on a Mac.

Cant load printer software

Similar Messages

Maybe you are looking for