Cant Migrate 3.x Hierarchy Datasource

as the title says we can migrate all our datasources from 3.x to bi7 but we do not get the option with the hierarchy datasources, is there any reason for this and if so what are the steps to overcome this.
Thanks

Hi,
There is no new method to create Hierarchy in BI7.0 So, we have to follow the same steps as in BW 3.5.
So,There is no need to migrate.
Thanks & Regards,
Dinakar.

Similar Messages

How to migrate hierarchy datasources?

hi friends
im in the process of migrating the datasources from 3.5 to 7.0 .
i have migrated 0profit_ctr_attr and 0profit_ctr_text and i need to migrate 0profit_ctr_0106_hier.. i right clicked on it and i didnt find migrate option....
can any one plz give me a sol for migrating the hierarchy datasources..
Thanx in adv
ravi

As of now you cannot migrate hierarchy datasources. You still have to stick to the older way of loading hierachies. TR/Infopackage..
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/682cacb88f297ee10000000a422035/content.htm

How to create a hierarchy datasource in R/3

Hello,
We use the 0MATERIAL_LKLS_HIER hierarchy datasource to load material hierachy in BW.
I had to modify the function module that creates the data for 0MATERIAL_LKLS_HIER.
Now, i need to create a new datasource based on the new function module.
To do so, i created a generic datasource (with SBIW), a master data attributes datasource.
I tried to put the same parameters that in 0MATERIAL_LKLS_HIER, but i didn't find how to indicate that it's a hierarchy and some other parameters (as you can see in RSA2 for 0MATERIAL_LKLS_HIER in the "semantic attributes" area).
Also, i couldn't run the new datasource in RSA3 because it didn't show me the right selection fields.
Could you tell me if there is a specific transaction to create hierarchy datasources ?
Thank you.
MGH

Hi,
May help you:----
Re: hierchy creation in ECC and replicate to BI
http://help.sap.com/saphelp_nw04/helpdata/en/8e/dbe92341c84242be2c7d3917f1c197/content.htm
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/7034028c-ad1d-2a10-2c94-868e7707dfe2
Regards,
Suman
Edited by: Suman Chakravarthy on Aug 6, 2011 3:12 PM
Edited by: Jason Lax on Dec 28, 2011 2:28 PM (Updated URL to correct format)

Creation of Hierarchial datasource in 7.0

Hello,
I want to create an extractor ( 7.0 ), for loading hierarchy into an infoobject. I came to know that its not possible to create Hierarchial datasource
in 7.0 flow ( possible only in 3.X).
still is it possible to create one through RSA2 transaction?
In RSA2, if i create a new datasource, there is a field DataSource Type--> and the F4 help gives an option of HIER ( Hierarchy nodes )
is it the right way to create one??
Thanks
Karthik

Hi,
Thanks for your reply.
The BW10 transaction does not seem to exist.
And i followed the steps mentioned in the link. In step 3, after entering the source system, i am getting a pop-up where i am asked to select
a datasource.
Here there are only two datasources present for selection
one is attribute datasource , other one is datasource for loading text. ( which were already there).
Here i am supposed to get another datasource name ( Hirearchial datasource ). I know that i have to create one before following the steps mentioned in the link.
( So that i get my hirearchail datasource name for selection in that pop up )
my question was how do i go about creating this datasource. In RSO2 transaction , i can create datasources for loading text, attributes and transactional data.
There is no option for creating Hirearchail datasource.

Flat File Hierarchy Datasources

We are creating several flat file hierarchy datasources. The datasources will be maintained in an external database.
I am familiar with the creation of flat file datasources for master and transactional data, but don't have good documentation for how the external flat file hierarchy is to be formatted.
We have reviewed the 2004 Netweaver Document "How to Download Hierarchies in BW" and have used the program referenced there, Z_SAP_HIERARCHY_DOWNLOAD, to download our hierarchies to then test the upload.
However, this has not worked.
Does anyone have the record layout that the flat file must be in to upload a simple 2-level hierarchy (for example groupings of 0vendor)?
Thanks, Doug

I think the URL you mention is http://help.sap.com/saphelp_nw04/helpdata/en/fa/e92637c2cbf357e10000009b38f936/content.htm.
This contains the record layout instructions as follows.
5. Maintaining the hierarchy:
Choose Hierarchy Maintenance, and specify a technical name and a description of the hierarchy.
PSA Transfer Method: You have the option here to set the Remove Leaf Value and Node InfoObjects indicator. As a result, characteristic values are not transferred into the hierarchy fields NODENAME, LEAFFROM and LEAFTO as is normally the case, but in their own transfer structure fields. This option allows you to load characteristic values having a length greater than 32 characters.
Characteristic values with a length > 32 can be loaded into the PSA, but they cannot be updated in characteristics that have a length >32.
The node names for pure text nodes remain restricted to 32 characters in the hierarchy (0HIER_NODE characteristic).
The system automatically generates a table with the following hierarchy format (for sorted hierarchies without removed leaf values and node InfoObjects):
Description
Field Name
Length
Type
Node ID
NODEID
8
NUMC
InfoObject name
INFOOBJECT
30
CHAR
Node name
NODENAME
32
CHAR
Catalog ID
LINK
1
CHAR
Parent node
PARENTID
8
NUMC
First subnode
CHILDID
8
NUMC
Next adjacent node
NEXTID
8
NUMC
Language key
LANGU
1
CHAR
Description - short
TXTSH
20
CHAR
Description - medium
TXTMD
40
CHAR
Description- long
TXTLG
60
CHAR

Configuration Manager 2012 SP1 Prerequisite Checker returns "Migration active source hierarchy" error

Hello,
I am getting "Migration active source hierarchy" error in the SCCM 2012 SP1 prerequisite checker on the CM 2012 primary site. The error says "There is an active hierarchy configuration for the migration. Please stop data gathering for each
source site in the source hierarchy." However, actually there is no migration source hierarchy configured and there are no migration jobs displayed in CM 2012 console. We used to configure this feature to migrate CM 2007 to current CM 2012 without service
pack two years ago and we have deleted these configurations.
In migmctrl.log, the following record is being generated every 60 minutes.
======================================================
Connection string = Data Source=xxxxx;Initial Catalog=xxxxx;Integrated Security=True;Persist Security Info=False;MultipleActiveResultSets=True;Encrypt=True;TrustServerCertificate=False;Application Name="Migration Manager".~~ $$<SMS_MIGRATION_MANAGER><04-07-2014
01:01:53.710+300><thread=6992 (0x1B50)>
Created new sqlConnection to xxxxx~~ $$<SMS_MIGRATION_MANAGER><04-07-2014 01:01:53.741+300><thread=6992 (0x1B50)>
[Worker]: Start two step scheduling
for MIG_Job~~ $$<SMS_MIGRATION_MANAGER><04-07-2014 01:01:53.741+300><thread=6992 (0x1B50)>
[Worker]:
Step 1. Query the schedule items that was running or requested to start immediately ...~~ $$<SMS_MIGRATION_MANAGER><04-07-2014 01:01:53.741+300><thread=6992 (0x1B50)>
[Worker]:
Step 2. Query the first item in order of DateNextRun ...~~ $$<SMS_MIGRATION_MANAGER><04-07-2014 01:01:53.819+300><thread=6992 (0x1B50)>
[Worker]:
No item found. Sleep until the next event.~~ $$<SMS_MIGRATION_MANAGER><04-07-2014 01:01:53.882+300><thread=6992 (0x1B50)>
[Worker]: End two step scheduling
for MIG_Job~~ $$<SMS_MIGRATION_MANAGER><04-07-2014 01:01:53.882+300><thread=6992 (0x1B50)>
[MigMCtrl]: the workitem queue is full!~ $$<SMS_MIGRATION_MANAGER><04-07-2014 01:01:53.882+300><thread=6992 (0x1B50)>
[MigMCtrl]: WAIT 3 event(s) for 60 minute(s) and 0 second(s).~ $$<SMS_MIGRATION_MANAGER><04-07-2014 01:01:53.882+300><thread=6992 (0x1B50)>
======================================================
I am not really sure where to look into in this case. I would appreciate any advice.

Hi,
Could you please upload the full migmctrl.log?
How about specifying a source hierarchy with the same name and password of the hierarchy before in the console, then click Clean Up Migration Data?
Best Regards,
Joyce Li
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Can a hierarchy datasource be copied in R/3 system?

Hi All,
I have a requirement wherein I have to copy an existing hierarchy datasource. Is it possible to copay a hierarchy datasource? If yes, how?
Is it possible to create a hierarchy datasource in R/3? if yes, how?
Please reply.
Thanks and regards
Rajib

Hi
You need to do some workaround
The user exit EXIT_SAPLRSAP_004 in the R/3 source system allows you to enhance your hierarchy DataSources.
Configure the Extractor in R/3
create an empty hierarchy,
generate the DataSource, and
populate it with data from the table via EXIT_SAPLRSAP_004
Edited by: Pavan on Feb 11, 2010 10:53 AM

Hierarchy Datasources in modified status

Folks,
Hierarchy datasources (replicated ones from R/3) are all in the modified version. They are 3.x datasources. I tried to activate them using following methods:
1) replicated them again
2) activated the transfer rule again
3) installed the datasource on BW side again
3) tried using program RS_TRANSTRU_ACTIVATE_ALL
None of the above methods worked and the datasources are still in the modified version. Though the loading status are all green but it seems that no changes updated in BW.
Please guide/suggest. Thanks in advance.

hi all,
i assume you guys are on NW04s BI 7.0, all DataSource that are created in BI 7.0 are new design, master data attribute, text and transaction DataSource can all be created in the new BI 7.0, but for hierarchy DataSource, it remains as 3.X, if you double click on the Hier DataSource, you will see the title "...Emulated 3.X ...", so the DataSource should be working perfectly fine except it is in "Modified" version, i believe it is just SAP has not or can't a way to upgrade hier DataSource.
cheers.

Problem in activating the Hierarchy Datasource for 0CostElmnt

Hello Experts,
Can you please suggest, how to activate the standard hierarchy datasource -0costelement for mapping it to the respective hierarchy (0CostElement). For this I have replicated the datasource and activated using BI Content. But inspite of this, respective datasource is not getting activated in SAP BI.
So can anyone suggest me how to activate the datasource.
Thanks
PT

Hi PT,
Based on your SAP patch level & error message number, y need to apply SAP note to resolve this error. If you provide correct error message, so we can suggest. Try to active business content grouping the before & after words. Sometime dependent objects my missed also y may get inactive in Transfer rules.
Thanks & Regards,
Krishna.

How to create hierarchy datasource in BI7.0

I want to create hierarchy datasource in BI7.0(Patch level:15), and my source systems is Oracle DB. Who can tell me how to do?
Thanks.
Edited by: Ricken Fan on Mar 5, 2008 9:44 AM

Hi,
SAP is not Supporting to create Hierarchy Data Sources in BI7.0
You have to create Hierarchy Data Sources in 3.x only.
Reg
Pra

Hierarchy datasource is showing wrong number of records

Hi,
I have to load hierarchies from r/3 to BW.when i test my hierarchy DataSource in RSA6 number of records its showing is 40,where as my R/3 system has 45 records for the same hierarchy.Can any one please let me know why its showing different number of records and how to overcome this problem.

Hello VaKa,
How r u ?
Just load the data to the PSA and identify which records are missing, you can do this, u have small amount of data. Then you can identify which 5 records are missing and it will help to find the reason as well.
Best Regards....
Sankar Kumar
+91 98403 47141

How to migrate report from one datasource to another?

Hi,
can anyone help me, I want to migrate report from one datasource to another.
Also what are the prerequisites for this?
any help help will be deeply appreciated.
Thanks,
Saurabh.

Hello,
To copy queries you can use TA RSZC.
http://wiki.sdn.sap.com/wiki/display/BI/CopyingQuerysfromOneTargettoAnother
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/204111a9-0fca-2d10-219c-be20e686cdb5?QuickLink=index&overridelayout=true
http://help.sap.com/saphelp_sm32/helpdata/en/9f/f57539d6d1c93be10000000a114084/content.htm
https://cw.sdn.sap.com/cw/docs/DOC-34603
Thanks.
With regards,
Anand Kumar

Creating Custom Hierarchy dataSource

hi all,
i want to Creating Custom Hierarchy dataSource from Ztable to extract data from r/3 side to bw.(not for attr and text)
I know we have two approach :
1) by creating a xls file.
2) by making a Z function Module.
Can anybody tell which one is better? and Why?
Wat the steps to do if i m using second approach means via function Module
Regards,
San!

hi,
Hi,
Pls check out the whitepaper below -
https://www.sdn.sap.com/irj/sdn/nw-bi?rid=/library/uuid/50cbb737-b36f-2c10-c78b-b63d116ce313

How to create a hierarchy datasource in BW

Gurus-
Here is my requirement.
I am asked to create a DSO and equivalent datasource for profit center. How to create a datasource for profit center in BW?

what does ur DSO has to do with the hierarchy? And subject line and the subject are misleading.
these are some of the std PCA datasources:
0PROFIT_CTR_0106_HIER
0PROFIT_CTR_ATTR
0PROFIT_CTR_TEXT
0EC_PCA_1                         Profit Center: Transaction Data on Accounts
0EC_PCA_2                         Profit Center: Statistical key figures
0EC_PCA_3                         Profit Center: Actual Line Items
0EC_PCA_4                         Profit Center: Actual Line Items Periodic Transfer

CANT CONNECT TO DB USING DATASOURCE ON J2ME PERSONAL PROFILE

Having installed the optional JDBC package for J2ME and using the personal profile. I cant seem to connect using a datasource provided by HSQLDB. I keep getting the following error in WSDD:
This compilation unit indirectly references the missing type javax.naming.Referenceable (typically some required class file is referencing a type outside the classpath)
My classpath contains the database.jar file.
Where am I going wrong?
please please could some one help.
Thanks

Just a guess according to my Personal Java experience: maybe that optional JDBC package for J2ME is only JDBC1.2 compatible so that your should use HSQLDB JDB1.2 package? Thanks for correction.

Cant Migrate 3.x Hierarchy Datasource

Similar Messages

Maybe you are looking for