Cant open doc

How do I convert doc to docx

For the obvious:
Have you checked your Downloads Folder for the doc file ?
Stefan

Similar Messages

Cant open doc files from the server on MacBook Air after upgrading to Maverick

Cant open doc files from the server on MacBook Air after upgrading to Maverick, I can only open up docx file. Thank you!

Thanks for the suggestion! I don't use Phantasm or VectorScribe (or any Astute Graphics plugins for that matter). I do, however, have a Wacom tablet and have a few plugins that concern using Blurb Book Creator as well as LiveSurface Context.
I did the very unfortunate and foolish act of upgrading to Maverick without a backup, so postponing isn't an option for me.
I geuss my question at this point would be, would it be worthwhile to wipe all the adobe products from my harddrive and re-install them? Or would that be a useless endeavor.
I don't have an external hard-drive so backing up and re-installing the entire OS would be a bit much. Any suggestions?

I cant open word excel documents in my playbook

i cant open doc xls docx xlsx documents in my playbook. any idea to solve this problem?

I found a VERY simple solution. Rename the file extension from .docx to .doc. You will be able to view it with no problem. The same should hold for .xlsx though I have not tried this yet.

Help, doc sent to me in web doc and receiver cant open

Hi,
New to Mac and havent quite worked out how to: edit a web doc and send as word doc as receiver cant open
Any help at all would be greatly appreciated
Michelle

You'll need to tell the whole story. Expand and explain what it is you are doing.

I have converted PDF to word doc but cant open because I have word 7. Do I need new word

I have converted PDF to word doc but cant open because I have word 7. Do I need new word

I don't know what version of Word that is, it may be very old indeed.
Apparently, the basic compatibility is
DOC files - Word 97 onwards
DOCX files - Word 2007 onwards (add on for Word 2003 available)

Pages tells me it cant open my doc i just updated to Maverick

i just updated to Maverick & updated the app for pages my imac is telling me it cant open it to go to Applework.com, I go there and select the Pages, I go to App Store and it says the new verision id installed.
However, the icon didnt change like the one on my macbook air...
can i uninstall the app Pages and reinstall it?????

http://www.macworld.com/article/2056563/should-you-do-a-clean-install-of-maveric ks.html

FS-CANT OPEN TEMPFILE issue in opening a concurrent program log file

Hi all,
I am working in Order Management authorization process in oracle apps 11i. After completion of order authorization , i did the shipping and delivery process in oracle Forms. During this Shipping and Delivery process the concurrent program gets error. (i.e status is : Completed -Error ).
Then i tried to open a concurrent program view log and view output file , but it shows following error in window.
Error: FS-CANT OPEN TEMPFILE.
I never did anything in server recently. But it throws the "FS-CANT OPEN TEMPFILE" error in forms while running the concurrent program.
Please Help How to resolve this issue.
Thanks
Prabu

Pl post details of OS, database and EBS versions, along with complete steps to reproduce the issue. Are there any errors in the database alert log or the concurrent manager log ? Has this ever worked before ? If so, what has changed since then ?
Pl see if these MOS Docs can help
"FS-CANT OPEN TEMPFILE" MESSAGE WHEN OPENING ANY VIEW LOGS OR OUTPUT LOGS [ID 462277.1]
Copy File functionality generates FS-CANT OPEN TEMPFILE [ID 780516.1]
FS-Cant Open Tempfile When Try to Send Output to Excel [ID 236311.1]
FS-CANT OPEN TEMPFILE in 11i
HTH
Srini

I have an external camera, IceCam2, connected to my MacBook Air, but I cant switch to the camera when I try to use videocam on a websayt. How do I switch from internal to externl camera? In use is Adobe Flash Player, but I cant open that program, is the s

I have an external camera, IceCam2, connected to my MacBook Air, but I cant switch to the camera when I try to use videocam on a websayt. How do I switch from internal to externl camera? In use is Adobe Flash Player, but I cant open that program, is the s

I think the McAfee suite will do the trick when I pay them a one-time fee of $69 or $179 for a year for unlimited support.
Your call of course but IMO a waste of money. Please read this first:
There are many forms of ‘Malware’ that can affect a computer system, of which ‘a virus’ is but one type, ‘trojans’ another. Using the strict definition of a computer virus, no viruses that can attack OS X have so far been detected 'in the wild', i.e. in anything other than laboratory conditions. The same is not true of other forms of malware, such as Trojans. Whilst it is a fairly safe bet that your Mac has NOT been infected by a virus, it may have another security-related problem, but more likely a technical problem unrelated to any malware threat.
You may find this User Tip on Viruses, Trojan Detection and Removal, as well as general Internet Security and Privacy, useful:
https://discussions.apple.com/docs/DOC-2435
The User Tip (which you are welcome to print out and retain for future reference) seeks to offer guidance on the main security threats and how to avoid them.
More useful information can also be found here:
http://www.reedcorner.net/mmg/

I cant open an important application because powerpc apps are no longer supported. what to do please

Can someone please advise on resolving issue I cant open an important application because powerpc apps are no longer supported. what to do please
using macbook air

iOS doesn't run on MacBook Airs.
Use this tip to identify your MacBook Air:
How to find your Mac's model and age?
Only MacBook Air 4,1 and later can't run Snow Leopard natively.
That said, there are options with this tip if it turns out you do have that MacBook Air or a later one:
https://discussions.apple.com/docs/DOC-6841
To find all your PowerPC Apps see this tip:
https://discussions.apple.com/docs/DOC-6271

A FCP user gave me .mov's that PP CS5 cant open, what can I do? (File link enclosed)

A FCP shooter gave me .mov's that PP CS5 cant open, what can I do? I guess she rewrapped the files because as they try to import into cs5 a FCP loading diologe box opens stating: Importing FCP XML.... Afterwards it says i dont have the codec necc.
I'm PC based only.
Here is a link to a short clip that can be downloaded.
I'm really stuck here guys. Cant reach the shooter.
The 5 second clip can be seen & downloaded from Vimeo:
http://vimeo.com/27230969

If you tried XD Decode you must think that they originated as XDCam then, right? That is the codec I had to buy and once it was installed everything was transparent and normal. So I'm not sure what the crashing is all about, assuming your system meets the minimal tech. requirements. I'd give it another try if you haven't already.
Your best hope would be to locate the original camera files, which could very well have been deleted following the .mov copying via the Mac. I've had no problem with native XDCam in Premiere. The next best solution might be to have that FCP user do the conversions to another file format you can use. Hopefully there aren't thousands of them.
Firstodd, that's very interesting that your Avid MC was able to work with those files. I just found this from an Avid doc of last year: "If you want to play the exported movie in QuickTime, you need to purchase a third-party QuickTime plug-in. Avid recommends the Calibrated{Q} XD Decode from Calibrated Software"
Still, for the $80 I spent a year ago, XD Decode was well worth it in time saved. I see the price has gone up $50 since then though.

I cant open some of the aplication i have

hello i cant open any aplication in my mac. Safari, iphoto, system preference why?

Disconnect all peripherals from your computer. Boot from your install disc & run Repair Disk from the utility menu. To use the Install Mac OS X disc, insert the disc, and restart your computer while holding down the C key as it starts up.
Select your language.
Once on the desktop, select Utility in the menu bar.
Select Disk Utility.
Select the disk or volume in the list of disks and volumes, and then click First Aid.
Click Repair Disk.
Restart your computer when done.
Repair permissions after you reach the desktop-http://docs.info.apple.com/article.html?artnum=25751 and restart your computer.
Are you now able to open anything?

Cant open .mdi with any mac application

how do you open a .mdi format with a mac.. is it possible? i tried changing it to a .tif on my pc, but still cant open ... help

Hi rider04 and welcome to Discussions,
MDI files are Microsoft Office Document Imaging - a proprietary MS format
that I believe they were trying to get accepted in favour of PDF format -
it's a similar sort of philosophy, except that where PDF works on just about
every platform available, MDI only works in Office for Windows, v2003 and
higher (in fact, the MDI print driver appears to have been removed from
Office 2007). They are far more than " Microsoft's version of the .tiff
format".
Unfortunately, there are no ways to read these docs on a mac - even the
venerable GraphicConverter can't handle them. Can't you get your
correspondents to send the data in another format? Almost nobody I know uses
MDI. If they are scanned paper documents, then TIFF4 or PDF are far better
(and more widely available) alternatives.
Regards
Stefan

Cant open iWork documents on iCloud

Hi guys,
I am running mountain lion 10.8.2, I put a few documents up into iCloud when 10.8 was released and they were working just fine, now cannot open a few numbers & pages documents.
I have 5 pages documents saved in iCloud, 2 docs I can open (the doc preview has the text) and 3 others I cant open (these have the pages icon as the preview) I have found the same issue in numbers.
I have unticked the documents option in the settings, let all the documents delete and then reticked it with no success.
I also went to the iCloud website and tried to download it from there and it says "Document cant be downloaded, please try again"
Tried dragging it onto my desktop from pages and get this “Document name” cannot be converted. Please install a newer version of iWork. I'm on pages 4.2 the latest version according to the app store.
I also logged onto my MBP at home and couldn't open the documents either.
I certainly hope this is fixable!!!!

Any progress on the 'copy your Time Machine backup' version of this issue? I started getting these errors 12 hours into a 24 hour copy… and eventually the copy failed.
Funny, I had the same symptoms, 12 hours into a 24 hour copy, too. (example below)
“D705B42B-AB04-4C16-9887-922B8A083A8E” cannot be converted. Please install a newer version of iWork.
The operation can’t be completed because you don’t have permission to access some of the items.
The operation can’t be completed because an unexpected error occurred (error code -8062).
What I noticed was that, despite following HT5096 correctly, I was not asked to enter Admin password at the beginning of the copy. I run in Admin all the time, and Disk Utility asked me for Admin password and Finder asked me for Admin password when I unchecked ignore ownership.
I'm VERY interested in why the copy process believes it's CONVERTING these iWork documents. And naturally I'm running what App Store tells me is the latest iWork.
Previously, I'd always just started another backup on new drives… I guess I'll be doing that in future too, as the well meaning HT wasted 12 hours. Sadly, I don't seem to be able to submit feedback on the HT, either.
I posted these comments to a newer discussion, more specific, but not much activity.
https://discussions.apple.com/message/23275504#23275504

Cant open attachment

I cant open attachment on my outlook web access using the safari, can anyone help? I tried reinstalling the safari applications and also the MAC Snow Leopard but was not successful. The error message is "Safari can't open this page. Server is not responding please try again. I try and try but to no avail.

Hi,
Might depend on the attachment, ie., .doc .jpg
And check Safari / Preferences - Extensions. If you have any installed, turn that off then try to open an attachment.
Carolyn

Open Doc - & in Child report prompts issue

Hi,
I am opening a child report using open doc function. This works fine but if there is no LOV in Child report with ampersend (&)
="<a href=\"http://server/XI/opendoc/openDocument.jsp?sType=wid&iDocID=7544&sWindow=Same&lsSSelectBusinessGroup:="[vTeam]"&lsSSelectOrgLevel01:="[Current].[Org Level 03]"&sRefresh=Y\">"[Current].[Org Level 03]+"</a>"
If valuue of [Current].[Org Level 03] has value eg: 'R&D' the child report is selecting only upto 'R' excluding '&D'. Because of this no data is seen.
Can anyone help?

Hi,
This is because of the character &.
You need to enclose the value in double quotes. Use Char(34) while forming the url.
="<a href=http://server:port/opendoc/openDocument.jsp?sType=wid&iDocID=7544&lsSSelect+Business+Group:="+[vTeam]+"&lsSSelect+Org+Level+01:="+Char(34)+[Current.Org Level 03]+Char(34)+"&sRefresh=Y>"+[Current.Org Level 03]+"</a>"
Also you can try replacing & with
&
in the url using Replace function.
If
&
does not work, then try
%26
Regards

Cant open doc

Similar Messages

Maybe you are looking for