Cant open itunes...any help???

Okay so yesterday i tried to open my itunes normally and it had worked well all this time before now...it said runtime error or something (windows visual C++) and that something was downloaded incorrectly...something about some C library and i have no idea what that means but it told me to reinstall itunes which i did...i deleted itunes totally and installed it again and nothing changed...it hits the same notifications all over again...switched my computer off and back on and still no difference So here i am hopelessly asking for help. If you know anything that could help me with this please reply. Thanks.

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

Similar Messages

  • I get a runtime error when I try to open itunes, any help?

    I get a runtime error when I try to open itunes, any help?

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall move on to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • I cant open itunes please help

    i cant open itunes i get this message "itunes was not installed correctly. please reinstall itunes" and i get this error 7, and i have try to reinstall itunes over and over but every-time i try opening itunes i get the same pop-up and i dont know what else to do

    Starting to steadily work through the possibilities with that.
    Have you checked on your .NET framework as per the following document?
    iTunes for Windows: "Error 7" message when opening iTunes

  • Just bought a season, cant open iTunes any more... Help?

    I just bought Season 1 of It's Always Sunny in Philadelphia, but while they were downloading, one of them didn't start, and when I said "check for purchases" it didn't do anything. So I decided to quit because it would prompt me to resume the download when iTunes is opened. When I went back to open iTunes, it wouldn't open.. I double click on the icon on my desktop, but it briefly flashes an icon that looks like a piece of paper with 3 shapes in the middle of it, then nothing happens. What's going on?
    (This is my first post, thanks for your help)

    I think what you are saing is that you have error message free launch failure with iTunes.exe persisting on the processes tab .
    If so this is commonly due to a problem with cryptographic services. Here is a diagnostic Method for working out the problem:
    Before checking if iTunes works, restart your PC or close the iTunes.exe process with task manager if it is running.
    A couple of simple things to try:
    http://support.apple.com/kb/TS1776?viewlocale=en_US
    Stop the bonjour service, this FAQ has instructions:
    http://support.apple.com/kb/HT2250?viewlocale=en_US
    But usually it is due to a problem with cryptographic services.
    Check to see if you have your smart card service and that it is not set to disabled. For some reason iTunes needs it.
    Start>>Run>>Services.msc
    you should find the smart card service in the list. Report back with your findings.
    Malware can interfere with cryptographic services and also prevent a resolution so it is important to check that your system is clean before proceeding: Run a virus and spyware scan with up to date definitions.
    Then work through *Method 4* in the following link:
    http://support.microsoft.com/kb/822798
    You should be able to copy and paste the individual lines to save on typing.
    Make a careful note of any error messages you get, they are important for diagnosis. Report back any error messages especially the names of any dlls mentioned.
    If there are no errors try starting iTunes.

  • Cant open Itunes, please help

    can someone please help me. i have an ipod photo. a friend of mine has an ipod video, and he wanted me to put some music on his ipod. i wasnt able to do so unless i updated my itunes software. when i did this, and restarted my cpu i was unable to open itunes. it will say that quicktime was not installed. i tried installing this, and also tried a system restore but nothing is working. i also tried to uninstall everything and reinstall with my disc that came with my ipod, but it wont work either. does anyone have any suggestions for me?

    okay, let's first try another QT 7.1 standalone install, this time taking a few additional explicit precautions.
    download and save a copy of the QT 7.1 standalone installer to your hard drive. (we'll run the install from there rather than online.) switch off antivirus and antispyware applications prior to the install.
    Quicktime 7.1 Installers … get the one that doesn’t mention itunes 6
    if that install goes through okay, does your itunes launch properly again?
    (if you get an error message on the QT standalone reinstall, let us know what it says. include error message numbers if you're getting any.)

  • TS5376 I am unable to install iTune and open it, any help !!

    I am unable to install iTune and open it, any help !!

    Are you getting error messages when you try to install and launch iTunes? If so, what do they say? (Precise text, please.)

  • Hi I cant open Itunes when my computer opens it keeps telling me there is a runtime error

    Hi I cant open itunes when my computer starts, I keep getting a runtime error
    It reads Program c:\program Files\iTunes\iTunes exe
    R6034
    An application has made an attempt to load the C runtime library incorrectly.
    Please contact the applications support team for more information.
    Any help greatly appreciated!

    What is important is how much free storage you have on your iPad not how much storage you have on iCloud ( which must be 17.2 GB of 25 GB).
    Look in Settings > General > Usage > Storage

  • Error Message reads: this application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem.  I have re-installed, SO many times and I still cant open iTunes.

    Hi Support,
    I am becoming anxious because no matter what I try it doesnt seem to allow me to open itunes.
    Error Message reads: this application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem.
    I have re-installed, SO many times and I still cant open iTunes.
    Please help!!

    Click here and follow the instructions.
    (98888)

  • Cant open itunes after upgrading to yosemite

    Cant open itunes on my macbook pro after upgrading to yosemite. Someone please help if they have faced similar issues.
    Thanks.

    Try Terence's instructions here  Is Iphoto gone ? i want it back!
    Pete

  • I downloaded the new update, and now cant open itunes

    I recently downloaded the new itunes update, now cant open itunes, redownloaded atleast ten times, still cant open it all i get is an error message, reinstalled the itunes i had before the update, that wont open either, so i deleted itunes and went to redownload it, still cant open up itunes or download it

    Hello there, thumerick.
    The following Knowledge Base article addresses the very issue you're describing:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Check for .dll files
    Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
    If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
    Reboot your computer.
    Note: Depending on your operating system, you may only have one of the listed paths.
    Uninstall and reinstall iTunes
    Uninstall iTunes and all of its related components.
    Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
    Re-download and reinstall iTunes 11.1.4.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • I installed itunes11 on windows 7, i cant open itunes

    Help emergency
    I installed itunes 11 on pc windows 7 , and then i cant use i tunes, i cant open itunes,
    i followed the process and uninstall all, and re install again  and no solution
    pat

    In regards to iTunes content, an iPhone can be synced or manually managed with music and video with an iTunes library on a single computer only, and photos can be transferred from a single computer only. When transferring iTunes content and photos from another computer, all iTunes content and photos transferred from a different computer will be erased from the iPhone first.
    You need to decide which computer you want to transfer iTunes content and photos from. If this will now be your computer at work, you will need to transfer your iTunes library and your photos from your Mac to your PC. You can transfer your iTunes library from your Mac to your PC at work following the instructions included with this link. This will make the iTunes library on your PC at work identical to your iTunes library on your Mac at the time it is transferred from your Mac. You will also need to authorize your PC at work with your iTunes account with iTunes - the same iTunes account used on your Mac.
    http://support.apple.com/kb/HT1751

  • I cant open itunes cause quick time failed to initialize (error - 2096)

    i cant open itunes cause quick time failed to initialize (error - 2096)

    hmmmm.
    doublechecking something before proceeding ... are any boxes ticked in the Compatibility tab for your QuickTime?
    (i've seen that message produced when some of the Display Settings boxes in there are ticked, not just the compatibility mode one.)

  • I cant open ITunes because of QuickTime

    Hi, I am really hoping someone can help me! I cant open ITunes, every time I try a message pops up stating 'Itunes requires QuickTime 7.5.5 or later' but i have now downloaded QuickTime and installed 3 times and it still isnt working! Please help community! This is my first mac and im itching to get stuck in!

    I am having the exactly same problem with my recent installation of update for Itunes 5.0 and Quicktime 7.
    when trying to download Quicktime 7 separately I get Error 1402 followed by Error 1603.

  • My iD password and i cloud is stolen then who stole this they deleted this and my iphone is locked and i cant open it please help me to open my i phone

    Hi how are you im from israel i buy i phone 5 from celcom company after 7 month some. One stolen my. Idpassword and icloud and. My i phone is locked know i cant open it any more and i give my i phone to. Cellecom company then they tell me that the company cant fix it i dont know what to do. I still pay money to the company and my i phone is locked please help me what to fo

    You are going to have to either Send it to apple or try one of these strategies in this link. http://support.apple.com/kb/ht1212
         Hope this Helps Jake

  • Cant open itunes says dont have apple application support

    cant open  itunes help

    Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you? If so, does iTunes launch properly now?
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

  • I have iphone 4 software version 6.1.3 ,suddenly i waked up and i noticed that some pf my apps does not want to open ,please any help !!!

    i have iphone 4 software version 6.1.3 ,suddenly i waked up and i noticed that some pf my apps does not want to open ,please any help !!!

    Do you have a backup?  If so you could try restoring from that.  Anything you created since the backup was made will be lost.
    These are the basic troubleshooting steps
    Troubleshooting
    Restarting your device
    Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider.
    Press and hold the Sleep/Wake button until the Apple logo appears then let go.
    Backup, reset, restore on icloud or itunes or restore as new. 
    Place the phone into recovery mode by doing this
    If this fails to fix the problem make an appointment and visit and Apple store or an authorised service provider

Maybe you are looking for

  • Conversion of string (0x000000)-(0xFFFFFF) into hex

    hi, i would like know solution for this problem. i will get values in the form of string 0x000000-0xFFFFFF or 0x00-0xFF by keyboard. i have to change value,increment(+) by one position and also decrement(-) by one with spinner controls. and i bave to

  • Create a BSP  based on R/3 program

    Hi all, My question is if it is possible to transform an already existing R/3 program to a BSP, without the need to re-write the program. I, for example, would like to transform the standard program SAPLRHP6 to a BSP. Sorry if this question is stupid

  • 2 Differnt Vendor in single PO

    Hi we have purchased some materials from one vendor1, and there is another vendor2 who transport this material to our company, now PO is made against vendor1, IN PO condition details In can put the second vendor name. At present the company is raisin

  • Where should I keep my utility classes...

    Hi All, I have WAR application and few ejb JARs which are sharing common utility classes. I have created a separate folder for my WAR application. ejb jars also are in the serverclasses folder. Now the question what's the recommended destination for

  • C4795 Printer Won't Turn Off And Small Screen Is Frozen

    My HP Photosmart C4795 printer that I purchased Sunday, April 10th is having an issue where once I turn it on, I cannot turn it off. The small screen has the HP logo on it and a little bar on it that doesn't seem to fill up; it just seems to shimmer