Cant open links in my gmail iMac

Hi, I downloaded MacKeeper and the update on clean my mac and everything went wrong after that. Every time I clicked to open a web page I opened a add site to different web sites I hadn't asked for. I have sent Mac keeper to the bin but still can't open the links in my gmail account. I get the " Grrr  a pop up blocker may be preventing  you from opening this page. I have gone to safari pref - privacy and all 4 boxes are ticked. I think I installed some malware when I installed the free mackeeper or clean my mac. Please help.

  1. Remove MacKeeper.
    MacKeeper removal
    http://applehelpwriter.com/2011/09/21/how-to-uninstall-mackeeper-malware/
2. Safari > Preferences > Extensions
    Turn those off and relaunch Safari again.
    Turn those on one by one and test.
3. Ddownload  free  AdwareMedic by clicking “Download ” from here
     http://www.adwaremedic.com/index.php
   Install , open,  and run it by clicking “Scan for Adware” button   to remove adware.
   Once done scanning and removing the adware, quit the app by clicking AdMedic in the menubar
    and selecting “Quit AdwareMedic”.
    To use manual method try this.
     http://www.thesafemac.com/arg-identification/
Best.

Similar Messages

  • After update to 6.0.2 i cant open link's in new tab by middle button. What happen with?

    i cant open link's by middle button click'n!
    Before update that was work, no new addons, nothing new!
    Just after update!

    see Cor-els reply in https://support.mozilla.com/en-US/questions/872247

  • Cant open links in iphone mail

    When I try to open any link in my Mail app on my iPhone 4S, nothing happens.  I've opened the link in my GMail App successfully.

    Reset the phone (no data loss): press both the home and power buttons for at least 10 seconds, releasing when the Apple logo appears.

  • Cant opened link I got after recieving a serial number for photoshop

    I cant open my download link after entering my redemption code and getting a serial number for photoshop elements. I pressed save and run. it went to my downloads but when I tried to open it nothing happened.

    What system? What browser? As a start, try using another one. Also refer to this:
    Download Photoshop Elements products | 13, 12, 11, 10
    Mylenium

  • Cant open links on my PDF files!

    It sucks because I am loosing a lot of time trying to figure this out. I been doing this for the last 3 months. The files I am trying to read are for school and I am losing a lot of good material that I have to self forage through this links. Please help. I dont understand why adobe will do something like this to not be able to open links in the pdf files

    They are not in the http://...etc  The links are embeded to the words. For example:
    Spiral Dynamics is one example amongst several (note the 'see also' section
    on this linked page) of a bio-psychological development
    All of the links that are in the book I am trying to read are like this. None of them are in the http:// format!
    thanks for your reply, I hope we can figure out how to fix this. I am going crazy..

  • Preview cant open ORF raw files on Imac but works on MBP..

    I have a wierd problem.. My ORF raw files from my EM5 do not open in Preview on my Imac but I can open them in Iphoto.  They do open on my MBP that is running the same OS and everything.
    Im very confused..
    Thanks

    Please forgive this, but you are posting in the wrong forum. This is the Mac Pro forum, not the MacBook Pro forum nor the iMac forum. I suggest that in the future you should post questions in the appropriate forum to assure your query is seen by those who may be best able to help you.
    I believe your problem may be that you are logging in as Guest rather than logging into a valid user account on the server machine. Guest accounts have access only to the Shared folder while all other data on the machine will be read-only. You need to log into the normal user account on the server machine to gain full access. And, you will need to designate what is shared on the server machine. If you want full access you must select the drive icon, press COMMAND-I, then check the Shared box in the Get Info window (this is all done on the server machine.)
    For more info select Mac Help from the Finder's Help menu and search for "file sharing" to find help articles.
    Message was edited by: Kappy

  • I have 37.0.2 verssion and still can't open links from my gmail. Please help.

    After upgrading Firefox to the latest version 37.0.2 I can't open any hyperlinks neither from my gmail or other websites. Could you help me please?

    '''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that temporarily turns off hardware acceleration, resets some settings, and disables add-ons (extensions and themes).
    '''If Firefox is open,''' you can restart in Firefox Safe Mode from the Help menu:
    * Click the menu button [[Image:New Fx Menu]], click Help [[Image:Help-29]] and select ''Restart with Add-ons Disabled''.
    '''If Firefox is not running,''' you can start Firefox in Safe Mode as follows:
    * On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    * On Mac: Hold the '''option''' key while starting Firefox.
    * On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
    When the Firefox Safe Mode window appears, select "Start in Safe Mode".
    ;[[Image:SafeMode-Fx35]]
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, theme, or hardware acceleration. Please follow the steps in the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
    ''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    When you figure out what's causing your issues, please let us know. It might help others with the same problem.

  • Cant open .mov file on 2011 iMac from 2007 iMac

    I have a 2011 iMac and I am trying to open a .mov file that I had saved on my old 2007 iMac. When I try to open the file in QuickTime, from my Seagate external hard drive, the file will not play. It shows a thumbnail of the image in QuickTime but it does not give me the length of the file. When I press play it says that there is no length of the file (0.00) and just stops. Do I need to open it in a different media player or is the file possibly corrupted? Please Help!

    I doubt there's good/any info in this file.
    Any idea how long this mov was or what size?
    A blank, totally black 32 KB movie here @ 320*240 is 7.61 seconds long.

  • I cant open links by dragging the link to the new tab button anymore

    Before i could drag a link and drop it on the "New Tab" button and it would open the link but it doesnt work no matter how hard i try to do it now... can anyone tell me why?

    I dont know but when reboot my laptop it started working normally and I can drag links again

  • Bug in 5.1: cant open links to audio files in Safari anymore.

    Before, if click a link to an mp3 file in safari it would play it with the quicktime. After upgrade to 5.1 i see just a black page for about 30s (even no usual "downloading" wheel in upper corner), and then nothing. Connecting via 3G, but as said, before the update the same links were working fine.
    please fix!

    Please post the link to the mp3 file or detailed steps on how to get to the link in Safari.

  • Where is my 'open link in new tab' option when right-clinking a link? and... why does every page load twice? and... why do i get 'internet explorer cant open link' errors when using firefox? and... why doesnt the red 'x' stop load icon work anymore? i jus

    i have all the issues stated in my question as of this morning. they werent there last night. WTF happened to my beloved firefox? BTW,
    I got an amd dual core 4000, nvidia gtx 9800, 4 gigs ram, running on windows xp sp3.
    BTW, windows updated last night, and thats when i got the problems
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30; WWTClient2; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729; InfoPath.2; Creative AutoUpdate v1.40.01)

    I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
    When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
    At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
    I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6.

  • Using firefox 8.0.1 -- cant open email links on web pages

    using firefox 8.0.1 and cant open email links within web pages

    Hi, Cor-el. The problem isn't setting my default email client --- the problem is that when I click on a "mailto:" link in a web page, any web page, while I'm using the firefox browser, "nothing happens" ....gmail is my default email client and when I click a mailto: link using explorer or any other browser, things work as they should and my gmail opens for me. This only became a problem with firefox when I downloaded version 7 (whatever) not too log ago. Downloading the latest version has not solved the problem.
    Any other help would be very much appreciated.

  • I can no longer log into my ichat linked to my gmail.  right after opening up ichat, receive the following message:  lost connection with jabber.  the server has unexpectedly disconnected.

    i can no longer log into my ichat linked to my gmail.  right after opening up ichat, receive the following message:  lost connection with jabber.  the server has unexpectedly disconnected.  how to troubleshoot?  thanks.

    Hi,
    There can be many reasons why the Login is "up the creek".
    Any break in the network at your end whilst logged in will cause  an issue.
    A sort of discrepancy between what iChat thinks the state should be and what the server thinks.
    If they don't agree the server will refuse to accept.
    A Crash at the server end which does not log you out properly will also do it.
    Any file at any time can be come corrupted.
    Luckily with the iChat .plists they are recreated if removed with an iChat Restart.
    If it were AIM you can also get your Account Suspended  and this will not log you in.
    (It tends to happen from Chat rooms where people notify AIM about bad behaviour (as they see it) and you have to apply to get Un-suspended).
    Most of the big IM services use multiple servers.
    Sometimes these go out of Sync.
    In the case of AIM this happens when they remove Old unused Screen Names from people's Buddy List prior to making them available for re-registration.  I am not sure if this happens at Google.
    You seem to be talking about an account that has worked at Work and having new computer at home.
    As I mentioned the Priority thing you have not said that it has coincided with the new computer logging in  (this will kick the work Computer out of Google whether you are logged in  on the Web Mail page or in iChat)
    IN addition to that iChat stays partially logged in for Off Line IMs
    This is done in the background by a support app called iChatAgent
    If your Computer is ON but ichat is not started people can still send you Messages.
    Instead of saving these on the server until you login iChat will start up.
    Depending if the home Mac is effecting the Work Login it may be holding sway over your Login.
    Using your girlfriend's login may have booted her Off Line where she normally uses the name/login.
    The AIM Side can be specifically set to allow Multiple Logins and therefore NOT allow them.  If this happens you get a warning and messages to do something about it.
    You do not get these in any Jabber or Google Login as the Priority setting is supposed to take care of it.
    If the Login works at the Web Mail Login and on one computer then the .plist on the work computer is the most likely issue.
    There is a small chance that a Corrupt Buddy Pic (Home Folder/Library/Caches/com.apple.iChat/Pictures) may be the cause.
    Set this folder to icon view and also use the Finder's View Menu > Show View Options and select icon view.
    This should show all pics as their icon.
    Check that all display properly.
    At this point I would try a COMBO version update install of the last Update you did over what you have.
    This often corrects hard to trace things
    The 10.5.8 COMBO is here
    11:28 PM      Monday; June 20, 2011
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb( 10.6.7)
     Mac OS X (10.6.7),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • A FCP user gave me .mov's that PP CS5 cant open, what can I do? (File link enclosed)

    A FCP shooter gave me .mov's that PP CS5 cant open, what can I do? I guess she rewrapped the files because as they try to import into cs5 a FCP loading diologe box opens stating: Importing FCP XML.... Afterwards it says i dont have the codec necc.
    I'm PC based only.
    Here is a link to a short clip that can be downloaded.
    I'm really stuck here guys. Cant reach the shooter.
    The 5 second clip can be seen & downloaded from Vimeo:
    http://vimeo.com/27230969

    If you tried XD Decode you must think that they originated as XDCam then, right?  That is the codec I had to buy and once it was installed everything was transparent and normal. So I'm not sure what the crashing is all about, assuming your system meets the minimal tech. requirements. I'd give it another try if you haven't already.
    Your best hope would be to locate the original camera files, which could very well have been deleted following the .mov copying via the Mac. I've had no problem with native XDCam in Premiere.  The next best solution might be to have that FCP user do the conversions to another file format you can use. Hopefully there aren't thousands of them.
    Firstodd, that's very interesting that your Avid MC was able to work with those files. I just found this from an Avid doc of last year: "If you want to play the exported movie in QuickTime, you need to purchase a third-party QuickTime plug-in. Avid recommends the Calibrated{Q} XD Decode from Calibrated Software"
    Still, for the $80 I spent a year ago, XD Decode was well worth it in time saved. I see the price has gone up $50 since then though.

  • Cant open itunes. Get error message CMBlockBufferCopyDataBytes could not be located in the dynamic link library CoreMedia.dll. Anyone know how to fix that?

    Cant open itunes. Get error message CMBlockBufferCopyDataBytes could not be located in the dynamic link library CoreMedia.dll. Anyone know how to fix that?

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    The error hints at a similar pattern to those discussed in the first and third boxes of the user tip, suggesting that you've got an outdated .dll file that needs replacing. You should find CoreMedia.dll in the one of the following folders:
         C:\Program Files\Common Files\Apple\Mobile Device Support
         C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
    Delete it and then repair Apple Mobile Device Support from the Programs and Features control panel. If that doesn't work go for the full tear down and rebuild.
    tt2

Maybe you are looking for