Cant open the page - Won't connect to My Yahoo
Just downloaded 3.1 for my mac and I can't connect to my.yahoo.com (my homepage).
I can connect to yahoo.com.
I can connect with firefox no problem and I could in Safari 3.0
Using OS 10.5.2
Any ideas?
Thanks.
HI MauriceA2K8 :
What exactly happens when you try to connect to my.yahoo.com?
Works fine for me with 3.1.
-Robert
Similar Messages
-
Safari cant open the page because its not connected to the internet
iPhone 3g connected to my wifi at home just fine for first 3 weeks, now wont connect and getting error message "safari cant open the page because its not connected to the internet" Signal strength is excellent, other wireless devices are connecting fine.
Ive reset network settings, modem and router but still getting error messages.Hey man, I have this same problem and it all started with 2.0.2. This is the worst update Apple could have given us. I love Apple products, and I loved my iPhone 3G until this update. I think 2.0.2 has caused more bugs than it claims to have fixed. Safari doesn't work anymore (3G or WI-FI) and I can barely pick up 3G unless I'm outside or near a window (whereas before 2.0.2 I could get 3G even in the underground tunnels of my university campus). My iPhone is no fun anymore and actually pointless, I might as well revert back to my original RAZR v.3, at least that thing worked as it was designed to.
I hope Apple issues a new update that just cancels out 2.0.2 and reverts back to 2.0.1....that one worked absolutely fine (at least I got no crashes of any kind with that version). -
Hi there,
Ive been trying to open research articles through google scholar, when i click to open the page it doesnt load and comes up with Safari cant open the page, too many redirect occured trying to open (then the web address). This might occur if you open a page that is redirected to open another page which is then redirected to open the original page.
This also happens when i access the databases through my universitys library web page - and it still wont let me load even the actual webpage let along particular article.
This is happening on my ipad as well - but this is not happening on my iphone or on my other lap top which is not an APPLE.
i know its not my internet as i used the same internet on the other comp and i also used it as wifi and without out wifi on my iphone.
PLEASE HELP! i need to study!!
thanksSafari 6
Empty Caches
Safari > Preference > Advanced
Checkmark the box for "Show Develop menu in menu bar".
Develop menu will appear in the Safari menu bar.
Click Develop and select "Empty Caches" from the dropdown.
Remove website data.
Safari > Preferences > Privacy > "Remove All Website Data".
http://support.apple.com/kb/TS3320 -
Cant find the page in itunes connect that ask for the name that you want your app company to be.
I have an indivdual developer account and I want to name my app company, because I want to release an app to the app store.
I have heard that in an individual developer accout, you can not establish a personal app company name. They say that the app developer name is the name that is used in your apple developer accout info.
is this correct?Yes.
-
Cant open web pages when connected to the internet via Telstra's Pre Paid WiFi (this connection is working on other devices) has anyone else had the same issues, works fine with BigPond Wifi
and now, when i tried to check again my network preference below the airport tab is showing a message that
"my airport does not have an IP address and cannot connect to the internet!"
then after seconds it will goes back to the first message that
"airport has the self assigned IP address etc....."
i don't know whats going on now!
airport tab is not showing green color anyway! i'ts always in yellow!
i tried turning it on and off but nothing happen! HEEELLLLPP!!!! -
I am using ipad 2, Wi-Fi is connected but cant open any web-site " error : safari cannot open the page becasue it is not connected to the internet "
need support pleaseYou haven't provided much information, such as what type of router you have? If you entered the encryption key as the password as opposed to the router name you have selected? If you have WEP or WPA? What you've tried that didn't work, other than saying it doesn't work? So, below is a link to some assistance. Follow this and see if it helps you.........
http://www.apple.com/support/ipad/assistant/wifi/ -
When trying to connect via 3G the iPad will not connect and shows several messages inclyding: "Safari cannot open the page becuase the server has stopped responding." There is no problem connecting via Wi-Fi. Why is this happening?
Same thing happening to me did you manage to get it sorted and if so how?
-
Hello Apple Experts!!
I Am Surendra and very new to this forum.. I just came across a problem with my Iphone while connecting to my company WIFI.. we are using Web authentication.. meaning..
The user will try to connect to the wireless network, the client will get the IP address and they are forced to open up the browser to provide the USERNAME and the PASSWORD on the webpage, once they pass the auth they will be able to access to the internet.
The WEB PAGE that asks for the USERNAME and the PASSWORD is HTTPS and for some reason that page is not at all opening and i am getting the below error.. If i disable HTTPS on the cisco Device the IPHONE works great..
Cannot open page Safari cannot open the page because it could not establish a secure connection to the server
This is happening only on the OS 5 and on the OS 4 everything works just great!!
I have a feeling that this has to do something to do with HTTPS / SSL connection with the IPHONE SAFARI or OS 5
Am connecting to Cisco Wireless LAN COntroller and the access point acting as the WIFI devices..
Any help on the same will be much appreciated!!
Regards
SurendraI'm having a similar issue. Connecting on my iPad FROM ANYWHERE to my work's domain results in the message by the OP.
I checked the ciphers enabled by their page, and this was returned:
High Strength Ciphers (>= 112-bit key)
SSLv3
EDH-RSA-DES-CBC3-SHA Kx=DH Au=RSA Enc=3DES(168) Mac=SHA1
DES-CBC3-SHA Kx=RSA Au=RSA Enc=3DES(168) Mac=SHA1
RC4-MD5 Kx=RSA Au=RSA Enc=RC4(128) Mac=MD5
RC4-SHA Kx=RSA Au=RSA Enc=RC4(128) Mac=SHA1
TLSv1
EDH-RSA-DES-CBC3-SHA Kx=DH Au=RSA Enc=3DES(168) Mac=SHA1
DHE-RSA-AES128-SHA Kx=DH Au=RSA Enc=AES(128) Mac=SHA1
DHE-RSA-AES256-SHA Kx=DH Au=RSA Enc=AES(256) Mac=SHA1
n/a Kx=DH Au=RSA Enc=Camellia(128) Mac=SHA1
n/a Kx=DH Au=RSA Enc=Camellia(256) Mac=SHA1
DES-CBC3-SHA Kx=RSA Au=RSA Enc=3DES(168) Mac=SHA1
AES128-SHA Kx=RSA Au=RSA Enc=AES(128) Mac=SHA1
AES256-SHA Kx=RSA Au=RSA Enc=AES(256) Mac=SHA1
n/a Kx=RSA Au=RSA Enc=Camellia(128) Mac=SHA1
n/a Kx=RSA Au=RSA Enc=Camellia(256) Mac=SHA1
RC4-MD5 Kx=RSA Au=RSA Enc=RC4(128) Mac=MD5
RC4-SHA Kx=RSA Au=RSA Enc=RC4(128) Mac=SHA1
This appeared to be a more than sufficient cipher list, yet my iPad won't load any page. I highly doubt it's a problem with SSL2 not being enabled because SSL2 has been deprecated for awhile now.
Any ideas? -
Since upgrading to Yosemite on my iMac I am frequently getting "safari can't open the page (blank) because the server unexpectedly dropped the connection this sometimes occurs when the server is busy. wait and then try again". This is with both a WiFi and Ethernet connection. The server is working fine from other devices using WiFi onto it such as iPhones, iPads, MacBook (which is also on Yosemite) so don't believe its an issue with the server.
I am also noticing page load very slowly when this problem is not occurring.Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2. -
"safari cannot open the page because it could not connect to the server"
As stated above. I have had this problem for the last 2-3 days. I have always been able to connect to the internet over wi-fi using my iphone but this problem had persisted these few days. This is a problem because my iPhone shows that I do have connection to the internet. ( I assume this from looking at the internet signal stregth bar at the top of the screen.) My laptop and computer have no problem but the message "safari cannot open the page because it could not connect to the server," keeps on appearing on my phone whenever I try to access the internet.
If it is of any relevance I use an iPhone 4s, reasonably new, practically 2 months. I have never had problems before this. Thank you for your help in advance.The connection strength icon you are referring to has nothing to do with the Internet. It simply indicates the strength of your connection to your local WiFi network. However, even when this icon appears you may not really be connected to your WiFi network.
Your router may not have given your iPhone a valid local network IP address. To check on this go to Settings > Wifi > your network name and touch the ">" to the right to see the network details. If the IP address starts with 169 or is blank then your router didn't provide an IP address and you won't be able to access the Internet.
Sometimes the fix for this can be as simple as restarting your router (remove power to it for 30 seconds and restart). Next, reset network settings on your iPhone (Settings > General > Reset > Reset network settings) and then attempt to connect. In other cases it might be necessary to update the router's firmware with the latest from the manufacturer's support web pages.
If you need more help please give more details on your network, i.e., your router make, model and version, the wifi security being used (WEP, WPA, WPA2), etc. -
what do i do if my internet is wep and i need it to be wpa2 because my ipod touch 4th gen connects to the internet but when i click on safari or itunes it says safari cannot open the page because its not connected to the internet. i have contacted apple support and they said to change from wep to wpa2 but when i change it to wpa2 and type in password and connect on my laptop it says the saved setting on this computer for the network do not match the require ments of the network
My 2nd gen works fine with WPA2 and AES encryption.
You may need to go back and start over. Reset the router back to factory defaults, log on as the admin, set up security, DHCP, and make sure the IP address pool has enough IP addresses to lease to ALL of the computers/devices that will connect to that the router. -
Hi, I’ve recently bought an iPad2 and can’t get connected with AppStore or iTunes, when I tap on these icons a grey page pops up saying is loading but never opens the page, no failure message is displayed, it just keep saying is loading.
Apparently it is not an issue with wifi since Safari, You Tube and Maps work well, I’ve tried some of the tips, e.g. log off/on my Id, change password but no one worked.
Your help will be highly appreciated.
Thank you.
Luis.Try a reset. Hold the Sleep and Home button down for about 10 seconds until you see the Apple logo. Ignore the red slider.
-
When I click on an active link from another application, it opens the firefox application, but won't open open the page - it just opens Firefox or takes me to Firefox. No new tab or window is opened and the link is not displayed.
Firefox sent an email to me to confirm that I had asked the above question. The email had a link to click. When I clicked it from Firefox, nothing happened. Then I opened IE, signed into Comcast, opened the email, clicked the link, and it brought me here.
-
My ipad 2 appears to be connected to the internet(all bars are up in the left hand corner).....yet I cannot connect to the internet(Safari cannot connect open the page because it is not connected to the internet)
I unplugged my router for 30 seconds and restarted my ipad...still nothing
I really don't think it is my service because my laptop works fine...as I am using the internet right now
I only had this ipad for 2 days
Are there any suggestions that can help solve this problem?Usually it's because you are not making internet connection via wifi.
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Cheers, Tom -
when I try to get on the internet thru safari at home, on my network, I get a pop up that says Safari cannot open the page because it is not connected to the Internet. How can this be and how do I fix it?
Does the iPod connect to other networks?
Do other device connect?
Did the iPod connect to this network before?
Try:
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>GeneralReset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
Maybe you are looking for
-
Itunes sees IPOD but I cannot get a drive letter to use as a hard drive.
I set disk use enabled but every time I unplug and replug the IPOD back in the check box is unchecked. What system does windows/IPOD use to mount the IPOD and get a drive letter? I am using a customized version of XP and I want to make sure I did not
-
Which Table Store the Query in the Query Manager?
Hello, I have looking for the table which store all the query inside the Query Manager. From this i can retrieve the query without open the program. Please help. Thanks.
-
Update of date column keeping HH:MM:SS
I am using the query below to update another parition but I am loosing time asssociated with the data. Can somebody show me how to keep the time and only modify YYYYMMDD part of the date update xxx.tab1 set create_date='20110522' where create_date >=
-
LOV from filtered VO (with bind variable)
Greetings experts, I would really appreciate any help about this topic. I am using JDev version: 11.1.2.3.0. Ok, the problem is this: i have a VO, based on an EO, which have a field (type: BigDecimal). I wanted to represent this field using a LOV, wh
-
hello flashers- i am new and would like to learn how to make my all flash site "stretchy" - aka full screen browser. any suggestions? appreciate 'cha.