Cant play bd disks burned in encore on samsung bdplayer

I have an samsung bdplayer and an sony bur they cant play burned bd disks from encore, error message STOP

I do not figured why the player sayes STOP?
I think I make some fundamentel wrong
I think there is some chance there is an authoring error.
Please post a screenshot of your Encore flowchart.

Similar Messages

Problems playing DVD's burned with Encore 2.0...

About 4 months ago, I burned a 4-DVD set for a client of mine... I authored them all in Encore 2.0 and everyone was happy with it (or so I thought)... But today I got a call from them and they said that their end-users are having trouble playing them in set-top boxes and that they either don't play and/or kick out at the 20-minute mark.
I have watched these all the way through on both my computer AND my set-top box (although my DVD is pretty new and plays everything - including .divx files on a CD-R, etc...) I asked him to look into it, get more details and get back to me. However in the meantime I would like to somehow verify that these are indeed error-free dvd's. By the way, they started duping on DVD+R and switched to DVD-R at some point (even though I told them DVD-R for highest compatibility to begin with), but they are having problems with both...
My main question is this:
Is there a program available that will run a test on a DVD's file structure, etc and verify it's a good clean "compatible" DVD?
I do realize that older player especially will not play some "burned " DVD's, etc... But I want to verify the problem is not on my end. I do not see a way that Encore would make a non-compliant disc... Any help would be greatly appreciated.
-BChil

So, AC3 is compatible with older players and even smaller. Great, I did not realize that. If I have to re-author I will certainly do that.
Luckily I still have the finished AVI files and the Encore project files. But I most likely erased the whole DVD project folder. Is there any way to re-call the DVD project with only the .ncor file? I know I have tried in the past and have not been able to. I would like these new DVD's to have the same exact look as the previously authored ones...
Now that I think about it, I never set anything. I exported to AVI's and let Encore maximize the bit rates to fit it all on a 4.7 gig DVD-R. (i authored 9 hours of footage to 4 DVD's with - one was over 2 hours long - this was against my recommendation by the way...) I haven't used Encore since September so am a little rusty. Where do I set the guidelines for the auto maximize option? (i.e. I still want to maximize the DVD but using .AC3 for audio and limit maximum bitrate to 7000 kbps...)
Thanks!
-BChil

Trying to get my fcp project to burn to dvd at the highest quality? Ive used compressor and then tried to put it in dvdsp put its not working. I am having problems with the audio or when i burn it , i cant play the dvd? any help would be appreciated

Ive used compressor and then tried to put it in dvdsp put its not working. I am having problems with the audio or when i burn it , i cant play the dvd? any help would be appreciated

I suspect you are attempting to burn an HD DVD, which will not play on a DVD player...
But if you provide more details such as the settings you are applying in Compressor, then we would be able to provide you more accurate information.
How are you adding the files to Compressor?
In FCP, what are your footage properties (command-9) and sequence settings (command-0)

Why is my audio recording that has been burnt to CD-R not playing on other audio equipment - its says no file or cant play.

Why is my audio recording that has been burnt to CD-R not playing on other audio equipment - its says no file or cant play.
What is the correct steps for burning the CD. I followed the help guide and done excatly what is said.
Can someone please help?
Thnks.

did you burn it as a CD for audio CD players....or as a data disk? big difference.
Also could be the media type (seen that issue endless times)....... try a diff. CD media. There are countless burn layers and CD blank media, no player or burner on earth can read or write to them all.
burn another blank CD to make sure it wasn't a bad CD,.......reject ratio on bad CD and DVD is about 5-15% depending on type.
Ive burned enough reject DVD and CD to fill a house

Error 2510/2355 - Disk burner or software not found

When I run as administrator, I get Error 2510. When I run as a regular user, I get Error 2355. Either way, and in safe mode or not, I get the "Disk burner or software not found" error when trying to burn CDs. iTunes was working wonderfully for ages and overnight (literally) it stopped writing CDs. There has been no new hardware or software in my system around the time it stopped working (unless my anti-virus missed something). Help please!
What I’ve tried:
Un-install and re-install iTunes.
Steps from: http://support.apple.com/kb/TS3299 (but then CDROM didn't work for regular use)
All of the steps from: http://support.apple.com/kb/TS2308 including solution 3 (manually un- and re-install GEAR drivers)
Ran System File Checker (no problems found), reboot, reinstall Gear Drivers
NOTE: When putting a CD into the drive, I can select Play From Itunes and it works fine.
Here are my diagnostics:
Microsoft Windows 7 x64 Home Premium Edition Service Pack 1 (Build 7601)
Hewlett-Packard HPE-500f
iTunes 11.2.2.3
QuickTime 7.7.5
FairPlay 2.6.12
Apple Application Support 3.0.3
iPod Updater Library 11.1f5
CD Driver 2.2.0.1
CD Driver DLL 2.1.3.1
Apple Mobile Device 7.1.1.3
Apple Mobile Device Driver 1.64.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 002ABB8808AE4888
Current user is an administrator.
The current local date and time is 2014-06-28 21:44:46.
iTunes is running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
ATI Technologies Inc., AMD RADEON HD 6450
**** External Plug-ins Information ****
No external plug-ins installed.
Genius ID: dd6dd481bbfb0f7503d21df5c81fb96d
iPodService 11.2.2.3 (x64) is currently running.
iTunesHelper 11.2.2.3 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** CD/DVD Drive Tests ****
No drivers in LowerFilters.
UpperFilters: GEARAspiWDM (2.2.0.1),
Failed while scanning for CD / DVD drives, error 2510.
Virtual drives can sometimes interfere with reading and writing CDs in iTunes. If this is a virtual drive and you are having problems with other drives, try uninstalling the virtual CD application.
E: Unsupported CD or DVD drive.
Virtual drives can sometimes interfere with reading and writing CDs in iTunes. If this is a virtual drive and you are having problems with other drives, try uninstalling the virtual CD application.
Force Optical Power Calibration before burn is turned on in the preferences.
The last failed audio CD burn had error code 4251(0x0000109b). It happened on drive E: HP DVD Writer 1260v on CDR media at speed 16X.

Bump.....
Can anyone please help me?

My MOV videos do not play when I burn a DVD using iPhoto.

My MOV movies do not play when I burn a DVD using iPhoto. I can use the other method with my Mac to burn DVDs but the videos are not good quality like they are in my iPhoto albums. How can I get better quality in the DVD videos if I am unable to burn a DVD using iPhoto? I upgraded to the free Mavericks.

Hi
Most common origin to this are:
Brand of DVD used - NoName, Memorex etc cheap brands might work as Data-DVDs - BUT NOT as Video-DVDs
Type of DVD used - I only use SL-DVD-R as they also playback on older DVD-players. DVD+R for newer DVD-players. Never ever DVD+/-RW. Dual-Layers usually creates more problems than Single-Layers
BURN SPEED - Very IMPORTANT factor - I never go faster than x4 - Normally I use x2
Material used - Video Codec, Photo and Audio file formats
Video-Codec: StreamingDV, AIC and HDV (I use)
Photo: .jpg - NO .bmp or other - all converted to .jpg first
Audio: .aiff 16-bit 48kHz or 44.1kHz (as on Audio-CDs) - NO .mp3, wma etc ailient formats - all converted to ..aiff 16-bit 48kHz or 44.1kHz first
Free Space: on Start-Up (Macintosh HD) Hard Disk - I never go less than 25Gb when doing Video-DVDs (for SD-Quality Video - if HD material is used 4-5 times more are a safe low level) (Other external Hard Disks - DO NOT COUNT as space here can not be addressed by Mac OS or iDVD for it’s massive use of .temp files)
Dusty DVD-burner Laser: I use a Cleaning DVD (no liquid but the one with brushes) from time to time.
Harmed DVD-burner Laser: Easy to do by burning more than three DVDs at a time - I let it rest for 30 minutes till next batch of three DVDs. If this happened - then only a costly repair will help. It will not heal by it self.
OBS: There are more than one Laser in the DVD-Burner so other functions might work OK as Playback CD/DVDs and even burn CDs. Still being broken.
Yours Bengt W

Help Me I Cant Play Anything!!!!!

Hi, I recently had trouble with my old pc it seemed that the m/b died on me!!! so iv just dished out £900 on a new pc tower . I built it myself and its my first effort. Inside there is,
Case: Thermaltake Xaser III
PSU: 360W Thermaltake Dual Fan
Motherboard: MSI 648MAX (8xAGP, ATA133 ETC.)
Processor: P4 2.4ghz (533fsb)
Cooler: Coolermaster IHC-L71
Memory: 512mb PC2700
Hard Drive: 80Gb Maxtor ATA-133 (7200rpm, 8MB Cache)
Floppy Disk: Samsung
CDRW/DVD: Samsung (x2)
Graphics: 128MB MSI GF4 *x8* AGP Ti4800SE-VTD with TV Out/DVI
Sound: Creative Labs Sound Blaster Audigy 2 Player Retail
Now then i have a few problems, first off when i boot up my machine i get a program called PC Alert4 showing up, this came with the motherboard and is used to show the status of your machine. Now there is one dial that shows up in red which is SYS FAN, I think it shows red because it is running too slow if anyone owns an MSI motherboard and may know this to be the case can you please inform me on what they SYS Fan is and how I can speed it up? Also if this is the case the CPU Fan runs at 2500
is this ok?
Another thing i that whenever I play a good 3D game like Warcraft3 or Mafia, Elder Scrolls3 etc my computer hangs and I cant recover it without rebooting Why could this be? I is really bugging me because I cant play anything? The graphics card is good enough to easily run any of these games at full wack but yet my comp hangs, is this a gfx issue or something else?
Please help as I am stuck with what to do next!!!
Thanx

In PC Alert there are 2 purple boxes over each indicator, slid them to adjust the tolerances untill it stops warning you. 2500rpm for a case fan is normal.
You can remove PC Alert from the startup by going to start menue->programs->startup->pcalert->right click->delete
The instability can be a number of factors.
Try memtest86 from http://www.memtest86.com to see if you are having any memory problems.
See if setting the AGP to x4 in the bios helps.
Try using an updated VGA driver from http://www.nvidia.com

I did an upgrade and lost all of my music. i had most of the songs (1400) on an external hard drive. how do i put these songs in my itunes library.? i was able to get them on my ipod some how but i cant play from just the itunes

i recently did an up grade on my ipod touch and lost all of my music (1700 songs). all of my music wason my ipod. i have an external hard drive with most of my songs (1400 songs) on it. through playing around and just trying to fiquire it out, i managed to get the music from the external hard drive to my ipod touch. the problem that i just found out is that i cant play those songs from my computer unless my iopd is connected to the computer. when i try to play a song, it gives me thiserror message " THIS SONG CAN NOT BE USED BECAUSE THE ORIGINAL FILE COULD NOT BE FOUND. WOULD YOU LIKE TO LOCATE IT. please help.what did i do wrong?

To import music into your iTunes library on the computer go to iTunes>Help>iTunes Help>Add items to iTunes and follow the instructions
Delete the "songs" that do not play in your iTunes library and reimport them.

I transferred my iTunes library from Window PC to MacBook pro and now I cant play songs that I purchased with an earlier ID and Password. How can I get around this problem?'t

I transferred my iTunes library from Window PC to MacBook pro and now I cant play songs that I purchased with an earlier ID and Password. How can I get around this problem?

Authorize the computer.
iTunes Store: About authorization and deauthorization - http://support.apple.com/kb/HT1420 - and another helpful post: https://discussions.apple.com/message/17828050

I cant download adobe flashplayer 10.3 its only 50% says i need to disable firefox to finish download I dont know how this firefox is new too me I cant play my games on facebook without flashplayer

I need help downloading adobe flash player 10.3 I have an HP Pavilion dv7 with windows 7 I just had a new hard drive put in today the other one was bad. installed mozilla firefox brother in law did said it was good to have well I am getting aggrivated to where I cant play games on my facebook account or anywhere on my computer now because I need this update of flash player help

If it's saying that you need to close firefox before you can continue, do this:
# Hit Ctrl-Alt-Del
# Click Task Manager
# After this, you'll want to left click on the process which says "firefox.exe".
# You'll also want to close ANYTHING that says "plugin-container.exe", as this is what holds firefox's plug in's and is part of it.
If what you've said above is true and it's complaining that you need to close firefox first, then this is all you have to do.
Alternatively, if you can't find task manager, simply restart your computer; Firefox doesn't boot on start.
You can also make sure that ALL windows are closed from Firefox, including the download window. Any of the above should fix your problem.
I also noticed you stated you're using firefox 5.0. The most recent version is 6.0. You can go to http://www.mozilla.com/en-US/firefox/new/ to download the newest version.

How do i restore missing files for i work 09 as it is asking me to reinstall but cant find the disk?

how do i restore missing files for i work 09 as it is asking me to reinstall but cant find the disk?

Hello Jessica472,
It sounds like you need to recover some missing files but do not have access to the iWork '09 disc you used to install it. If you have a Time Machine backup and know what files you need, you can use the "Restoring specific files or folders" section of the following article to restore them:
Mac Basics: Time Machine backs up your Mac
If you do not have Time Machine, you will need the disc to reinstall the software suite.
Thank you for using Apple Support Communities.
Regards,
Sterling

No disk burning software installed warning

My 12 year old Granddaughter needed some help with her iPod and a disk burning problem. The iPod was a snap, she probably knows more about it than I do! But the real problem is how I may have installed Panther on my old iMac 400DV which she now uses. When she wants to burn a CD from iTunes, the blank CD shows up fine ( including on the Desktop ) but she gets a warning that she can't burn the CD because there is "no disk/c burning software installed"!
Is it possible that I could have installed Panther and not installed the needed pieces to burn a CD?
I know I burned CD's in OS 9 before I upgrade the OS and gave her the iMac. Is it possible that the version of iTunes in her version of Panther is the problem? I don't know exactly which version she has of iTunes, but I see many posts here about 6.0.3 fixing burning problems. I'm using a plain jane 6.0 version in Tiger with no problems.
I just need to know what pieces to update/fix. As you can imagine, burning CD's for ones family is a big problem for some 12 year olds!

You are totally correct, I discovered that after searching Apple spec sheets. I suppose that is why I bought a firewire CD burner! [headbash] Since I gave all the hardware ( iMac, scanner, etc, ) to my Granddaughter, I don't have it sitting here in front of my nose! So I'm claiming that and my age as the reason for the question!
And it was not custom ordered. Similar to my brain which is also the 'stock' model. Problem is, there are too few connections or too many bad 'cells'. Perhaps they need a faster refresh cycle, also.
Anyway, thanks for the answer. hope you got a laugh at my forgetfulness.

How do I get the higher player than (Flash Player 10 ActiveX.exe)? I cant play the same games I bou

I cant play games I bought when I was playing XP. I got Vista, and then the one numbered 7. I was told I need to get the newest Version after (Flash Player 10 ActiveX.exe), that is the one I have now. Can you help me get the version that is newer? Sincerely, Lillie Yates PS. my E-mail is: [email protected]

Hi,
Please open up your browser and click on the below link:
http://www.adobe.com/software/flash/about/
The Version Information box shows the version installed on your browser. Please compare this version with the version which mentioned below in the table. If both are mismatching, please uninstall the flash player. Click on the same above link which will help you to install the latest version of flash player.
Thanks

Cant play my newest converted video on my ipod

i cant play my newest coverted video on my ipod.
it seem like it freeze and then return back to the main.
anyone please advise.

Does the video work on your computer?
What did you use to convert the video?
Do other videos work on your iPod?
btabz

Blu-ray disc burned with Encore CS4 stops after each chapter instead of reading continuously

Hi
Blu-ray disc burned with Encore CS4 stops after each chapter instead of reading continuously
This happens with an entire series of chapters but does not happen with another series of chapters on thre same DVD.
I am missing something to solve this issue.
Can anyone help?

Hi Jeff,
I just checked:
There is no override on the montage

Cant play bd disks burned in encore on samsung bdplayer

Similar Messages

Maybe you are looking for