Cant play burned CD's on other computers/cd players

The last few cd's I have burned will not play in my cars cd player. It will load and then play track one, but no sound comes out and I cant move through tracks. Any ideas? Help!!

I have the same problem - but, regretably, no solution yet in sight.
Up until a few weeks ago, I had a perfectly serviceable Pioneer DVR-109 Combo drive in my Dual 1GHz G4. It had given good results consistently until it finally failed to either read DVD-ROM or write anything at all. No complaints there, as it had given me nearly 6 years of service and "owed me nothing", as we say over here.
I rang my local Apple Reseller (Galmac Computers of Galway) for a replacement and was sold a Liteon LH20A1P Superdrive.
This will read DVD OK (haven't tried writes yet - reasons will be clear) but will not write an audio CD which can be read in anything except a professional Denon DN4000 deck (costing over €1000). A replacement of the same model gives the same result. Previously, the Pioneer would write, even at 48x, and every disc would play in every machine in the studio, house or car. No change in media has occured in the meantime. I use very reliable PMD Magnetics Audio CD-R media, as suupplied by StudioSpares of London to all leading recording establishments, and have never once had a bum burn with any of them.
The clue comes when I look in System Profiler and find that the Liteon drive, sold to me by an Apple dealer, comes up as "burn unsupported" ! ! !
Beware the Liteon LH-20A1P drive, folks.
I think I'll stick to names like Sony and Pioneer, even if it means ditching my Apple reseller as a source ............
Dual 1GHz G4 / 800MHz G4 / 867MHz G4 Powerbook / 350MHz G3 Blueberry iMac   Mac OS X (10.4.9)  

Similar Messages

  • I Cant play burn DVD due to no support of superdrive??

    I tried to turn on the iDVD application and had the following comment pop-up
    "Your Macintosh doe snot have a supported Superdrive. Please note that while you will be able to work with iDVD projects, you will not be able to burn a DVD disc"
    This is crazy. I thought I could burn DVD on my i-mac.

    Thanks everyone. It seems it does have it. This is what is witten
    PIONEER DVD-RW DVR-K06:
    Firmware Revision: Q609
    Interconnect: ATAPI
    Burn Support: Yes (Apple Shipped/Supported)
    Cache: 2000 KB
    Reads DVD: Yes
    CD-Write: -R, -RW
    DVD-Write: -R, -RW, +R, +RW, +R DL
    Burn Underrun Protection CD: Yes
    Burn Underrun Protection DVD: Yes
    Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
    Media: No
    Now my question is can I stick in the small DVD (3 1/2 inch) into the drive? I want to collate all my video recording which is on the small size DVD disk and burn it on the larger size DVD disk through the i-mac.

  • Cant play bd disks burned in encore on samsung bdplayer

    I have an samsung bdplayer and an sony bur they cant play burned bd disks from encore, error message STOP

    I do not figured why the player sayes STOP?
    I think I make some fundamentel wrong
    I think there is some chance there is an authoring error.
    Please post a screenshot of your Encore flowchart.

  • Cant play Doom 3 with 6600GT AGP

    I cant play Doom 3 but all other games runs perfect... Halo, NFSU 2, The Return of the King, RalliSport Challenge, etc...
    I get 7658pts in 3DMark03 and 3452pts in 3DMark05... normal scores for my system (I think)
    Doom starts good... the intro and  the options looks fine, but when i start a new game the screen goes black. I can hear the environment sound but the image never comes...
    If i load the "game save" of the final stage, the game run perfect... but not all the stages starts fine when are loaded...
    Could be this because my PSU is too weak , with only 18A in the 12v rail?? or something else??

    try this  http://downloads.guru3d.com/download.php?det=965
    is better than official 66.93

  • No sound cant play videos on other computers, movie maker doesnt work VADO HD

    well not much good as a camcorder:
    wont play HD video on other computers even if codecs are downloaded
    wont play sound ANYWHERE (sound is there if i put in Windows moviemaker, but no picture)
    Movie maker software errors out when tryin to load videos
    Uploaded new firmware, no resolution to issues
    Also, if i change the name of a file in windows it no longer shows up on the vado or vado software
    Ideas anyone?

    Q On my new Vista machine, I decided just to install K-lite codec pack (Standard edition). This installs ffdshow and a nice media player.
    When my codecs get messed up by some other video product installation, i just reinstall it. Works well so far.
    http://www.codecguide.com/download_kl.htm

  • Trying to get my fcp project to burn to dvd at the highest quality? Ive used compressor and then tried to put it in dvdsp put its not working. I am having problems with the audio or when i burn it , i cant play the dvd? any help would be appreciated

    Ive used compressor and then tried to put it in dvdsp put its not working. I am having problems with the audio or when i burn it , i cant play the dvd? any help would be appreciated

    I suspect you are attempting to burn an HD DVD, which will not play on a DVD player...
    But if you provide more details such as the settings you are applying in Compressor, then we would be able to provide you more accurate information.
    How are you adding the files to Compressor?
    In FCP, what are your footage properties (command-9) and sequence settings (command-0)

  • .mov to DVD to play on other computers

    I have a .mov file on my desktop that plays just fine with QT.
    If I burn the file using the Finder's Burn Folder or make a data disc using Toast, the resulting .mov file on the burned DVD will not play on my computer.
    What am I doing wrong?
    I simply want to put the .mov file on a DVD so that it will play on other computers, not so it will play on a DVD player.

    Toast no longer supports crossover copying of Mac and PC DVD's. The older versions (Toast 10.2) did because they embedded "autorun" data so the DVD would be read by Windows. According to the techs at Toast, the only way to get a Mac made .mov (etc) file to play on a PC or Mac/PC is to include some type of PC autorun software with the transfer. This is done by options-more-add autorun. Of course, the catch 22 is that there is no easy way to do this. I'm done with Toast.
    M.

  • Inability of dvd disc to play on other computers

    After burning a disc using premiere elements 2.0 it will not play in other computers.
    It will play on stand alone dvd players with a tv. but not on computers
    Why?? Am I missing something in the process?

    Jim,
    I see that you found the PE forum.
    As I mentioned in the PrP forum, it is likely that the computers do not have DVD software players. If they do, then it might be that Autorun is off on the multi-drives. I have mine turned off on my workstation. If there IS a DVD software player available, you might need to navigate with it, to the multi-drive. Cyberlink's PowerDVD needs this for me. If I pop in a DVD, nothing happens. I open PowerDVD and point it to the multi-drive with the DVD, and it plays fine.
    If your DVD's play on set-top players fine, you have a good DVD. You need to explore those computers to see what they have, or do not have. Many computers do not come with DVD software players installed.
    Good luck,
    Hunt

  • Why is my audio recording that has been burnt to CD-R not playing on other audio equipment - its says no file or cant play.

    Why is my audio recording that has been burnt to CD-R not playing on other audio equipment - its says no file or cant play.
    What is the correct steps for burning the CD. I followed the help guide and done excatly what is said.
    Can someone please help?
    Thnks.

    did you burn it as a CD for audio CD players....or as a data disk?  big difference.
    Also could be the media type (seen that issue endless times)....... try a diff. CD media.  There are countless burn layers and CD blank media, no player or burner on earth can read or write to them all.
    burn another blank CD to make sure it wasn't a bad CD,.......reject ratio on bad CD and DVD is about 5-15% depending on type.
    Ive burned enough reject DVD and CD to fill a house

  • Hello guys i recently got my iphone 4G S and when i connect it on computer i cant see it in itunes i tryed everything with restarting device reinstalling the itunes and usb fixing but i cant still see it in itunes.On other computers i can see it help plz

    Hello guys i recently got my iphone 4G S and when i connect it on computer i cant see it in itunes i tryed everything with restarting device reinstalling the itunes and usb fixing but i cant still see it in itunes.On other computers i can see it help plz

    Verify Step 2 and 3 mentioned in the article.
    http://support.apple.com/kb/TS1538

  • HT1206 my other computers have fried or have been broken. so how am i supposed to deauthorize those computers if i cant even turn them on? and why is there a maximum to how many computers i can authorize my account to?

    why cant i authorize my account to this computer? i cant turn on my other computers with this account authorized because they were fried and broken so how am i supposed to deauthorize those computers?

    "why cant i authorize my account to this computer?"
    No idea, as you have not explained your problem.  What happens when you try to authorize it?
    " i cant turn on my other computers with this account authorized because they were fried and broken so how am i supposed to deauthorize those computers?"
    You cannot until you reach the limit of 5, then you can deauthorize all.
    iTunes Store: About authorization and deauthorization

  • Unable to play my quick time files to other computers....

    Dear folks,
    I post again my problem. I have a quick time movie which I upload to a digital performer(music software)file, I write music based on the picture and then I bounce to quick time movie.
    The new bounced file on my desktop is playing fine (by the way I have quick time 7.5.5. pro). I transfer it to my memory stick (travel drive) and I am trying to play the file to other computers but I get only sound, not video.
    So my question is how come only audio is playing and not the video.
    I am sure my codec is set to H.264 which is the most standard codec, right?
    Please advise what to do.
    P.S. I exported the bounced file as avi (using "file" and "export" from quick time menu and I was able to play it to other computers. The quality though is not as good as quick time movie.

    I have the same problem: HD movie exported from Final Cut Pro as av QT movie will play beautifully on in the QT player on the dual Mac Pro it was created on, but when trying to play it on my flatscreen TV from a Mac mini, I get sound, but just a black screen.
    Format is Apple HD 1080i/50, 1440 x 1080 (1888 x 1062) (no idea where these formats come from) FPS 25, nomal size and current size is 1920 x 1080. I have QT pro 7.5.5. and mpeg-2 plug-in on both macs.
    I have also tried the h.264 codec with same result. MPEG-4 codec will show video with staccato perfomance and stops, even though it plays evenly on the Mac Pro. My .movs in ordinary 4:3 plays ok, so may be it’s a HD format problem?
    Juging from other postings, there is a bug in the later QT versions, but why then is it fine on one mac and not others, with same version of QT. TV has nothing to do with it, because it plays quirky on other Mac minis also.
    Someone from Apple should comment on all these problems.

  • Another one!! Can't play burned CD in car and other music system

    Hi,
    There has been a problem with my computer recently and I used the forum to find the answer which did fix the problem (safari crashing all the time). Great and thanks to everyone for their help.
    But I have now noticed that I am having problmes with burning CD's and I think have tried all what has been suggested. I purchased music from the itunes store and it plays without any problems.
    The discs that I am using are DVD-RW. I have gone into itunes preferences and selected "when you insert a CD" - import cd and I think the import settings are correct.
    When I clicked on the burn button, I selected audio CD which didn't work, so I tried selecting Data CD or DVD, that didn't work either.
    p.s I have successfully burned before this, so I don't know why I can't do it now.
    Thanks for some more help.

    The discs that I am using are DVD-RW.
    You're really using DVD disks? You need to be using CDs if you want them to play in most car and other CD players, very few of which will play a data disk at all, much less a data DVD. Burning audio CDs, which is the format you generally will need for other players, usually works best with CD-R (not CD-RW).
    I have gone into itunes preferences and selected "when you insert a CD" - import cd and I think the import settings are correct.
    Just FYI, those settings have no effect on burning a disk from iTunes.

  • A way to play other computers' iTunes over AIRPORT?

    I have a g5 tower and a wireless iBOOK on my new AIRPORT base station.
    Ive seen at other places, a way to see the other computers' itunes music on each computer.
    i.e. Im on my g5 but wanna play the IBooks Itunes playlist on the g5.
    possible?

    See iTunes: How to Share Your Music

  • Will a QT movie play on other computers if . . .

    Hi,
    We're using a FCPro timeline set up as 422 Prores. If I export a SC QT movie of our master . . . will other computers be able to play that QT movie if they don't have FCPro loaded?
    I know when we were using DVCPRO HD timelines, other computers had to have the DVCPRO HD codec installed - which they normally wouldn't have to do - but with that codec, the exported Self Contained QT movie would NOT play on a computer with regular QT on it. (They needed that special codec.)
    But with a Prores 422 export - I thought all computers would play that QT? Or am I wrong?
    Thanks
    Larry

    Doug, you're a GEM! And I thank you for your response - because of you - I dug deeper and learned more! Hohoho and a very funny response, too.
    Actually, I'm pretty experienced with FCPro - but I do seem to have huge gaps of knowledge! Very huge, sometimes!
    And you are quite right - you'll never go wrong with h.264 - although if I drop it on a timeline and render it - it'll edit fine - but you KNOW that! But for many without FCPro - they couldn't - so it was a good answer!
    Meanwhile, here's some test footage I shot with a new camera about 2 years ago - I'm sure you'll enjoy the footage . . .
    http://www.trivue.org/Trivue/Time_Remap.html
    Thanks again,
    Larry

Maybe you are looking for

  • Ram upgrade only works in one slot at a time

    Hey, has anybody experienced this same issue? I have a mid 2009 Macbook Pro 13" and I was trying to upgrade from the factory 2 Gbs of RAM to 8 Gbs. I have 2X4 Gbs of memory and it turns out that only one 4 Gbs stick works at a time. The laptop boots

  • I grab a null frame.  Can a Java genious help, please?

    Hello. I am a high school student working on a science fair project. Right now I am using JMF to grab a frame from my ATI TV Wonder USB. The code below accesses the TV Wonder but it seems like I get a null frame because I have put a if statement in t

  • Email both Yahoo and others problem on iphone

    i have had to recreate my accounts (2) several times, they work, i get/send email and then boom, overnight, it stops working. i tried to reset today and can not get either to work. when I open them it simply says "checking for mail" and the circle th

  • Poor performance of WD Abap/ Adobe

    Dear sirs, I would like to know if anybody of you have experienced very poor performance of WD ABAP with Adobe interactive form. Our client has paid for a 2-3 pages interactive form in WDA and is complaining about very poor performace. As a result no

  • Report Queries column limitation

    Hi All, is there any limitation on PDF report queries regarding the column number? the error message I've got is: ORA-06502: PL/SQL: numeric or value error: character string buffer too small error I was thinking that the result is too long but is onl