Cant play "Cal of Duty 4" on my Portege M400

Hi - my M400 doesnt let me launch COD4 despite loading it and running a test for DirectX9.0C - it appeared to pass this test.
I think the specs in the PC are up to the min standard required but when I launch it, it crashes. Is there anything I can do or is this asking too much of my tablet? (Played it on my brothers Mac and its awesome"!)
Specs required for the game are:
Minimum:
Intel(R) Pentium(R) 4 2.4 GHz or AMD(R) Athlon(TM) 64 2800+ processor or any 1.8Ghz Dual Core Processor or better supported
512MB RAM (768MB for Vista)
NVIDIA(R) Geforce(TM) 6600 or better or ATI(R) Radeon(R) 9800 Pro or better
Recommended:
2.4 GHz dual core or better is recommended
1024MB RAM (2048MB for Vista)
3.0 Shader Support recommended. Nvidia Geforce 7800 or better or ATI Radeon X1800 or better [

The M400 has a weak graphics card in it that barely supports Vista's Aero Desktop system. The Intel 945 Graphics Chipset is not fully compatible with DirectX9 dispite what the checks say, some of the DirectX9 work is done via emulation on the CPU.
As for Call of Duty 4, I doubt there is any chance of getting it working let alone a decent frame rate.
I own an M400 and it was one of the things I knew would be a problem when I purchased it.
Sorry :(

Similar Messages

Im running 10.6.7 but cant play call of duty 4

It says to redownload from the mac app store and I did and it still doesnt work!Im running 10.6.7 Is There a sulotion?my mac book air runs call of duty a bit slow so i wanna play it here
Hardware Overview:
Model Name:          iMac
Model Identifier:          iMac9,1
Processor Name:          Intel Core 2 Duo
Processor Speed:          2.66 GHz
Number Of Processors:          1
Total Number Of Cores:          2
L2 Cache:          6 MB
Memory:          2 GB
Bus Speed:          1.07 GHz
Boot ROM Version:          IM91.008D.B08
SMC Version (system):          1.36f3
Serial Number (system):          < Edited by Host >
Hardware UUID:          B1153108-214B-5A09-8BC2-16FFCC0C0B5B

The M400 has a weak graphics card in it that barely supports Vista's Aero Desktop system. The Intel 945 Graphics Chipset is not fully compatible with DirectX9 dispite what the checks say, some of the DirectX9 work is done via emulation on the CPU.
As for Call of Duty 4, I doubt there is any chance of getting it working let alone a decent frame rate.
I own an M400 and it was one of the things I knew would be a problem when I purchased it.
Sorry :(

I did an upgrade and lost all of my music. i had most of the songs (1400) on an external hard drive. how do i put these songs in my itunes library.? i was able to get them on my ipod some how but i cant play from just the itunes

i recently did an up grade on my ipod touch and lost all of my music (1700 songs). all of my music wason my ipod. i have an external hard drive with most of my songs (1400 songs) on it. through playing around and just trying to fiquire it out, i managed to get the music from the external hard drive to my ipod touch. the problem that i just found out is that i cant play those songs from my computer unless my iopd is connected to the computer. when i try to play a song, it gives me thiserror message " THIS SONG CAN NOT BE USED BECAUSE THE ORIGINAL FILE COULD NOT BE FOUND. WOULD YOU LIKE TO LOCATE IT. please help.what did i do wrong?

To import music into your iTunes library on the computer go to iTunes>Help>iTunes Help>Add items to iTunes and follow the instructions
Delete the "songs" that do not play in your iTunes library and reimport them.

I transferred my iTunes library from Window PC to MacBook pro and now I cant play songs that I purchased with an earlier ID and Password. How can I get around this problem?'t

I transferred my iTunes library from Window PC to MacBook pro and now I cant play songs that I purchased with an earlier ID and Password. How can I get around this problem?

Authorize the computer.
iTunes Store: About authorization and deauthorization - http://support.apple.com/kb/HT1420 - and another helpful post: https://discussions.apple.com/message/17828050

I cant download adobe flashplayer 10.3 its only 50% says i need to disable firefox to finish download I dont know how this firefox is new too me I cant play my games on facebook without flashplayer

I need help downloading adobe flash player 10.3 I have an HP Pavilion dv7 with windows 7 I just had a new hard drive put in today the other one was bad. installed mozilla firefox brother in law did said it was good to have well I am getting aggrivated to where I cant play games on my facebook account or anywhere on my computer now because I need this update of flash player help

If it's saying that you need to close firefox before you can continue, do this:
# Hit Ctrl-Alt-Del
# Click Task Manager
# After this, you'll want to left click on the process which says "firefox.exe".
# You'll also want to close ANYTHING that says "plugin-container.exe", as this is what holds firefox's plug in's and is part of it.
If what you've said above is true and it's complaining that you need to close firefox first, then this is all you have to do.
Alternatively, if you can't find task manager, simply restart your computer; Firefox doesn't boot on start.
You can also make sure that ALL windows are closed from Firefox, including the download window. Any of the above should fix your problem.
I also noticed you stated you're using firefox 5.0. The most recent version is 6.0. You can go to http://www.mozilla.com/en-US/firefox/new/ to download the newest version.

Can I play Call of Duty Ghosts on my iMac (21,5" late 2013) with Windows 7 and Parallels

Hey there,
I Have an iMac 21,5" 8GB RAM 1024MB 2,9Ghz. I buyed it in Feburary. I want to play Call of Duty Ghosts on my iMac i use Win7 with Parallels. I don't know if it works? I already have Skyrim and Fifa 14 and they work very well. So I want to ask you if i could play CoD Ghosts without any problems.
p.s. I dont really want to use Bootcamp only when ther is no other option.
Thank you

The simple answer is yes. As long as the computer meets the minimum system requirements.
The long answer is....maybe.
Parallels is a Virtual Machine for Windows, meaning that it runs on the Mac OS X Software. Bootcamp repartitions your HD and utilizes just the Mac's Hardware to run Windows using its own OS system files.
If you have 2 games already that run in Parallels right now with no issues, then I don't see why this new game would not work. However if it does not, you may want to consider a Bootcamp parition in order to keep your Windows and Mac OS X partitions separate in the event of any OS problems.
Good luck!
-Captain

How do I get the higher player than (Flash Player 10 ActiveX.exe)? I cant play the same games I bou

I cant play games I bought when I was playing XP. I got Vista, and then the one numbered 7. I was told I need to get the newest Version after (Flash Player 10 ActiveX.exe), that is the one I have now. Can you help me get the version that is newer? Sincerely, Lillie Yates PS. my E-mail is: [email protected]

Hi,
Please open up your browser and click on the below link:
http://www.adobe.com/software/flash/about/
The Version Information box shows the version installed on your browser. Please compare this version with the version which mentioned below in the table. If both are mismatching, please uninstall the flash player. Click on the same above link which will help you to install the latest version of flash player.
Thanks

Trying to get my fcp project to burn to dvd at the highest quality? Ive used compressor and then tried to put it in dvdsp put its not working. I am having problems with the audio or when i burn it , i cant play the dvd? any help would be appreciated

Ive used compressor and then tried to put it in dvdsp put its not working. I am having problems with the audio or when i burn it , i cant play the dvd? any help would be appreciated

I suspect you are attempting to burn an HD DVD, which will not play on a DVD player...
But if you provide more details such as the settings you are applying in Compressor, then we would be able to provide you more accurate information.
How are you adding the files to Compressor?
In FCP, what are your footage properties (command-9) and sequence settings (command-0)

Cant play my newest converted video on my ipod

i cant play my newest coverted video on my ipod.
it seem like it freeze and then return back to the main.
anyone please advise.

Does the video work on your computer?
What did you use to convert the video?
Do other videos work on your iPod?
btabz

Cant play full screen

I upgraded my qt 6 pro on my power book and now I cant play fullscreen movies. Surely I dont have to buy qt pro again for the version mac gave as a free update so I can have full screen again

Full screen viewing of QuickTime content has always been a "Pro" feature. It's not part of the "free" player.
When you moved to Tiger you installed QT version 7 (a core component). Your version 6 Pro is no longer installed and version 7 is a new "Pro" purchase.

I cant play music

please help, i got some new music so i erased all the tracks off of my creative labs zen microphoto, cuz i had some stuff on there that i didnt want, and i was gonna put a bunch of new stuff (and some old stuff) on there. So i erased all the tracks, and put about 800 song back on, now, i cant play any of them!? I go to "music library" then "artists", and then i select an artist...after that, none of the songs show up, and the screen is blank except for the background and the time. does anyone know how to fix this?thanks

ok, i went on ahead and did what you said...but i still cant see the tracks under the artists.. now alls i have is a big long list of songs in a sorta random order on one huge playlist...which is what i had before when i just selected "all tracks"? i'm trying to get it to where i can see the tracks by artist. ya know, where i select the artists name, and then it shows me all the songs that i have by the artst, cuz right now its just showing me a blank screen, for every artist.

I cant play recorded videos n my 5230

hi guyz...i've bought a new 5230,n stocked it with lot f stuffs.now i cant play videos which i had been recorded.it got stuck after so,etime. The sound go streaming without any problem on the background!.am using the default real player. I downloaded certain mp4 videos,it doesnt have this problem too. Only recorder videos...suggest me a gud remedy.

This forum is just for discussions on the forums themselves. I suggest reposting your question in the appropriate forum for your software, which you can find here:
http://forums.adobe.com/index.jspa
And when you do, don't forget to include enough information about your setup and your problem.

I cant play Youtube videos

I cant play the youtube videos in this website, http://community.hazratsultanbahu.com/community/modules.php?name=Video_Stream
Can someone how can i do so please , i really need to show some videos to my mate.Thanks

This forum is just for discussions on the forums themselves. I suggest reposting your question in the appropriate forum for your software, which you can find here:
http://forums.adobe.com/index.jspa
And when you do, don't forget to include enough information about your setup and your problem.

I cant play flv and avi format after upgrade to Mountain Lion

I've updated to Mountain Lion on my Macbook Pro and now I cant play any movies with format flv and avi ??? am I missing something here, keep getting errors from Apple Quicktime, thanks

I would recommend that you download and install the excellent Free player, VLC:
http://vlc-media-player.en.softonic.com/mac

I cant play movies on my iphoto that ive downloaded from my iphone

I cant play movies on my iphoto on my imac home computer that ive downloaded from my iphone.
Please Help

I phone is only 3G. 3G is not very good for streaming video even if you got a strong signal. Also I would hope you have unlimited data if you do get in a good signal.

Cant play "Cal of Duty 4" on my Portege M400

Similar Messages

Maybe you are looking for