Cant print from w7 laptop to xp desk connected to usb printer

probook4530   w7 pro   64 bit
wireless to att modem
modem   to dell dimension 8400  xp 32 bit
usb connected printer deskjet  3845  to dell desktop
direct usb connected to either machine print ok
but not networked  printing

I assume you have rebooted the router and the printers?  I'd start with that.  Have you replaced or swapped the Ethernet cables?  Does the light near the 2600n's Ethernet port blink when you plug it in (as if there is traffic between it and the router)?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Similar Messages

  • Unable to print from my laptop using the wireless connection..

    I have configured my HP 3540 series as Wireless printer. The diagnostic tools can detect the printer wirelessly on my laptop and a test page is being printed out without issues. However, when I try to print a document from the same laptop I am unable to get it printed.
    I am sure the printer IP is getting detected on the laptop and is configured properly.
    What else can I check to resolve this issue.
    Note: I get the same issue if I connect the printer through the USB cable provided.

    Hello naveen8549,
    Welcome to the HP Forums.
    I see that you are having some printing issues.
    I suggest that we start off by running the HP Print and Scan Doctor.  Let me know if you see any error codes or messages.
    Thanks for your time.
    Cheers, 
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • I am trying to get my D1560 to print from my laptop.

    I was trying to get my D1560 to print from my laptop. On advice from the HP website, I uninstalled the printer, and downloaded the latest driver software. But when I extract the file (either the downloaded file or from the CD), nothing happens. The file extraction reaches 100%, then nothing. No error messages, no directions on what to do next, not even a kiss goodbye.
    How can I get the printer installed, and then print from a networked computer that is not directly attached to the print device? 
    I've taken two steps back. At least before, Windows (7, 64-bit, by the way) would recognize the printer, even though I couldn't print to the D1560.
    The print device is attached to my HP Slimline desktop. Does the Slimline have to be awake in order to print from my laptop?
    Also, I downloaded the HPPDU software, (before I uninstalled the printer) but since it can't find the printer, it can't solve the problem. That IS the problem - the computer can't find the printer.

    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899
    Can’t Send Emails on iPad – Troubleshooting Steps
    http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
    Setting up and troubleshooting Mail
    http://www.apple.com/support/ipad/assistant/mail/
    Using a POP account with multiple devices
    http://support.apple.com/kb/ht3228
    iOS: Adding an email account
    http://support.apple.com/kb/HT4810
    iOS: Setting up an Outlook.com, Hotmail, Live, or MSN email account
    http://support.apple.com/kb/ht1694
    Server does not allow relaying email error, fix
    http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
    Why Does My iPad Say "Cannot Connect to Server"?
    http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
    How to Sync Contacts with Your iPad Using iTunes
    http://www.dummies.com/how-to/content/how-to-sync-contacts-with-your-ipad-using- itunes.html
    iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
    http://support.apple.com/kb/ts2621
    The iPad's Mail app has no provisions for creating groups. However, you can use a third party app that many users recommend.
    MailShot -  https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
    Group Email  -  https://itunes.apple.com/us/app/group-email!-mail-client-attachments/id380690305 ?mt=8
    iPad Mail
    http://www.apple.com/support/ipad/mail/
    Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
    http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
     Cheers, Tom

  • Why cant i print from my ipad using airport express but i can print from my mac using the express

    why cant i print from my ipad using airport express but i can print from my mac using the express

    Because your printer has to be Airprint compatible and connected to WiFi. There are applications, such as Printopia, that will allow you to print through your computer.

  • Officejet Pro 8500A Premium will not print from my laptop

    I have an Officejet Pro 8500A Premium. I jus had ot reload my driver thinking it would resolve the below issue but it did not. The connection string is  laptop -> docking station -> ethernet to router -> ethernet to printer.  On my laptop I can see the ink levels of the printer so there is a connection but when I attempt to print and select the Officejet 8500 (non fax) printer, it attempts to print to the 8500A fax and then pops up with a fax box.  
    Additional Information:
    I have tried the following:
    - Changed the port for the 8500A fax
    - Tried to set the default printer from the fax to the network printer - received an error message: Operation could not be completed (error 0x0000709). Double check the printer name and make sure that the printer is connected to the network.
    This question was solved.
    View Solution.

    Hello coolhandluke2,
    Welcome to the HP Forums.
    I see that you are having issues when attempting to print from your Laptop.
    I also see that you are getting an error 0x0000709.
    I do have a few suggestions we can try.
    First off, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
    I am also going to give you a document that deals with a 'Problem with Printhead,' 'Printer Failure,' 'Ink System Failure,' or a '0x...' or a 'C2...' Error Me....
    If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
    Thanks for your time.
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • Trying to print from Macbook 10.4.11 using Brother DCP-J125 printer from usb getting messagge on screen The process " Ratsterobrother 145 " terminated unexpectedly on signal 5. Why cant I print from computer?

    Trying to print from Macbook  OS X 10.4.11 computer to a newly purchased printer which is a Brother DCP-J125 connected through USB.
    When I try to print Iget a message saying : The process " Rasterobrother 145 " terminated unexpectedly on signal 5. What does this mean? Why cant I print? What does this message mean? Is it from my computer or from my printer?
    Any help or advice would be appreciated.

    Trying to print from Macbook  OS X 10.4.11 computer to a newly purchased printer which is a Brother DCP-J125 connected through USB.
    When I try to print Iget a message saying : The process " Rasterobrother 145 " terminated unexpectedly on signal 5. What does this mean? Why cant I print? What does this message mean? Is it from my computer or from my printer?
    Any help or advice would be appreciated.

  • Printing from wireless laptop to ethernet connected Officejet pro 8500 A909a

    I have an officejet pro 8500 A900a and a Linksys WRT54G router and I've been having difficulty printing from my laptop via WiFi. I used to be able to print regularly and I think HP sent me an update to some software that has since stopped that from happening. I have the IP and mask for the printer set manually asto never change and set the default gateway to the correct setting for my router.  I can ping the device and I can access the printer admin pages from my laptop using the ip address. I can even print reports and run diagnostics from the HTTP connection but no printing from Word or ANY other source.  The printer does print from another desktop that has a USB connection to the printer but the connection is not always plugged in.  What do I do?
    cheers

    I'm betting you just need to open up the ports in the firewall. I'll list them below.
    HP printer ports
    UDP
    TCP
    Acronym
    Definition
    Used for
    137
    137
    NetBIOS
    network Basic Input/Output System - (basic communication)
    UDP: Printing, Photo Card Upload
    138
    NetBIOS
    network Basic Input/Output System - (basic communication)
    UDP: Photo Card Upload
    139
    NetBIOS
    network Basic Input/Output System - (basic communication)
    TCP: PhotoCard Upload
    161
    SNMP
    Simple Network Management Protocol - Monitering network attached devices
    UDP: Printing
    427
    427
    SLP
    Service Location Protocol (finding out what things can do on the network)
    UDP: Printing, Photo Card Upload, Scanning, Faxing, Installation
    9100
    PDL
    page description language - printer control language (how does the page you want printed look)
    TCP: Printing
    9220
    TCP: Scanning, Faxing
    9500
    TCP: Scanning
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • My c5180 no longer prints from my laptop. an error message comes up with ink system failure

    My printer still prints but it will not print from my laptop. We've checked all the connections, replaced all the ink because it said that ink had expired. An error message comes up ink system failure.

    Try the troubleshooting steps in this page.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • 5512 all in one wireless; unable to find printer from my laptop

    Last week we had to replace our wireless modem.  Yesterday was the first day we needed to print something. The printer was showing it was "offline" on my laptop and my son's laptop. It hadn't been connected to the new modem, so I did that. It shows a wireless connection and good signal strength. After that our laptops still showed it was offline.  Another laptop doesn't show the printer is offline but we get an "unable to print" error message. I decided I would uninstall the printer from my laptop and then reinstall it (I'd had this issue before and this worked) but now it says there's no printer found when trying to add it back.  Any ideas??? 

    Hello LLHRN07,
    Welcome to the HP Forums.
    I see that you are having an issue when it comes to connecting the printer to the new wireless router.
    I suggest that you try to run the Wireless setup Wizard from the printer. To do so, please go to the front panel on the printer, use the right arrow and go to the SetUp Menu.  Use the right arrow again and select the Wireless Menu. From here, go to the Wireless SetUp Wizard and follow the prompts to connect to the new router.
    If you have any issues, or any other questions, please feel free to write me back.
    Cheers,  
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • How can I print from my iPad air? We have wifi and can print from our laptop.

    How can I print from my iPad air?  We can print from our laptop.

    Setup AirPrint Printer
    1. Buy an AirPrint enabled printer; see list below
    http://support.apple.com/kb/ht4356
    2. Run the CD provided and set printer and iPad on the same network
    3. Start printing from your iPad using AirPrint

  • [SOLVED] Apps freeze when i try to wirelessly print from this laptop

    I have an HP Zv6000 running arch that is about 2 1/2 years old, and I have shared the printer on my main desktop so that the laptop can print wirelessly (the desktop also runs arch).  The problem is, when I try to print from the laptop, Openoffice stops responding.  This also happens on certain other dialogs, especially when I am trying to change stuff in the Options dialog.  I am also unable to print from other applications.  I really don't know what the problem is here.  I have the printer's driver installed on the laptop and the usblp module loaded.
    Last edited by kclive18 (2008-06-24 11:02:56)

    Sorry for the double-posting, but I uninstalled and installed CUPS on both client and server, and followed the Linux to Linux printer sharing configuration posted on the arch wiki.  This laptop still freezes whenever I try to print anything except for a test page from the CUPS web interface.  So it must be config-related and the problem HAS to be on my laptop, since my server can print just fine.  Does anyone know what the problem is?  I've been trying for hours and nothing's wanting to work for me.
    EDIT: I tried running soffice from the terminal and I looked for any output.  This is what I got:
    [ken@myhost ~]$ soffice
    libGL error: open DRM failed (Operation not permitted)
    libGL error: reverting to (slow) indirect rendering
    Nothing really related to printing here.  Also, running gedit from terminal gave me no output whatsoever when it froze.  Weird...:|
    Last edited by kclive18 (2008-05-29 16:13:15)

  • I can't print from macintosh laptop unless I print first from my desktop. officejet 6500a

    i have a macintosh laptop. I can't print from it unless I print first from my desktop. officejet 6500a.
    it says: "communication failure. the computer is no longer able to communicate with the printer."
    Yet, once I print something from my desktop, I can print from the laptop just fine, until I turn one of the machines off...

    Is the printer connected to your wireless router?  What router?  What version of OS X?
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Shared printer from a pc does not show up on my printer list.

    I have a macbook air and the shared printer from a pc does not show up on my printer list.  I know it's available on the network as I have a another pc that has access to it.  The Mac did find it at one time but it has since disappeared.  Appreciate help.
    Rich

    Can you see the CD ripped songs in iTunes itself? Can you then right-click and select "Show in Windows Explorer"?

  • How can I print from my ipad2 via my Canon Pixmar MP620 wireless printer? I get a message stating "no airprinter found".

    How can I print from my ipad2 via my Canon Pixmar MP620 wireless printer? I get a message stating "no airprinter found".

    Welcome to Apple Support Communities.
    If you have a Mac running OS X, try AirPrint Activator.
    http://netputing.com/airprintactivator/airprint-activator-v2-0/
    It's "donation-ware."
    Free to download and try. If it works and you like it, the developers do appreciate a donation, but the app continues to function, even without a donation.

  • How can I print from my iPad 2 using an HP Artisan 810 printer.

    How can I print from the iPad 2 using an Epson Artisan 810 printer.

    You said HP in your post title and Epson in your body text, but I think it is actually an Epson Artisan 810.
    If that's right, then the free Epson iPrint app should work for you - it lists your printer as one that it supports: http://itunes.apple.com/us/app/epson-iprint/id326876192?mt=8

Maybe you are looking for

  • Download csv and pdf in interactive report

    Hi, I'm getting below error while opening a PDF file downloaded from an interactive report (APEX). Adobe reader cound not open "TEST.pdf"because it is either not supportd file or because the file has been damaged. Also when i download in csv format t

  • Not able to connect HTTP web servers outside firewall

    Hi I unable to connect external web server from my java program. Even I used follwing code to in my java program. I am getting some problem with encoding the password(base64Encode) Please anyone can give code to bypass this corporate firewall from my

  • Error Message in the CK11N

    Hi Gurus , Costing variant ZFP1 does not belong to material cost estimate . I am getting this message kindly give me some light on that how can i include in the material cost estimate Edited by: Er.SAP.IIT on Nov 10, 2009 11:49 AM

  • Degraded array will not rebuild with new disk

    what do I need to do, inserting new disk doesn't start the rebuild I have tried everthing that I know to do from raid admin 1.5.1 thanks

  • Is there a way to upload Supporting Details into a cell in Planning?

    Is there a way to upload Supporting Details in a cell in Planning from a couple of rows of data in Excel ? We have a lot of supporting details in excel rows that we want to load into one cell in Planning Web form 11.1.1.3. I know how to extract Suppo