Cant print wirelessly after getting new router

Hi,
I cant connect wirelessly. After I uninstalled then reinstalled using the hp set up assistant I downloaded from this site, I get asked ito check a box f I want to connect wirelessly.
I check the box. It asks me to connect via USB. I am connected via USB. I disconnect then reconnect. It asks me to enter my wireless network name. I do that but it says the device isnt connected and that I should connect via USB. I disconnect the USB and connect it to another USB port and it still doesnt work.
I shut down the computer, disconnect the printer, and reset the router. I turn on the computer then reconnect the printer and launch again the set up assistant. It still cant discover the WiFi. I go to my system preferences and open up Print & Fax. I see the printer there. I delete it. When I add again finally I see a place to enter an ip address. I add that and now I see a generic printer with the ip address. I still cant connect.
I go back and re add the HP 6000 printer option that it says to add. I uninstall the hp software, I shut down my computer, disconnect the printer. I turn off the router, disconnect it, reset it. I wait for the router to turn back on, then turn on the computer, turn on the printer, reinstall the software. It still says the device isnt connected.
I check to see if its listed in Print & Fax and it is. The set up assistant wont let me continue. I
just discovered that I can manually connect to my network device by typing in my ip address under the gear icon in the set up assistant. I input my routers ip address and every ip address listed in my network but it still cant connect. Im out of ideas!!!
Thanks

Hey @HP-Mac-Lisa,
Because your printer is unresponsive now to our steps I would recommend reaching out to our Technical Support queue by phone to explore additional options.
HP Technical Support can be reached at: 800-474-6836.
If you live outside the US/Canada Region, please click the link below to get the support number for your region.
HP Worldwide Contact
It's been a pleasure working with you. I wish you luck going forward with this!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

Similar Messages

Having trouble getting iBook to connect wirelessly after getting new modem

Ok so I got a new modem, and I put it in PPoE mode and bridge mode so that the internet would work with my router.
Internet is working great/fine on my PC that's wired to one of the ports on the Linksys, and internet works fine when wired to the iBook. I changed no settings on my iBook from before when the router was with the old modem/old settings.
Modem: Motorola 2210-02
Router: Linsys WRT54G2
iBook G4, I think it has the 1 ghz processor (bought it back in 04!) I am getting a signal on my iBook showing the wireless network at full strength.
I made sure that the router is not blocking anonymous request and MAC filtering is off, but it does not connect to the internet.
I'm stumped help!
I used these instructions to bridge the modem:
http://www.dslreports.com/faq/15881
Message was edited by: Royalal

Royalal wrote:
Internet is working great/fine on my PC that's wired to one of the ports on the Linksys, and internet works fine when wired to the iBook. I changed no settings on my iBook from before when the router was with the old modem/old settings.
Welcome to Apple's discussion groups.
iBook G4, I think it has the 1 ghz processor (bought it back in 04!) I am getting a signal on my iBook showing the wireless network at full strength.
I made sure that the router is not blocking anonymous request and MAC filtering is off, but it does not connect to the internet.
You might try resetting your connection settings using the steps listed in this message:
http://discussions.apple.com/thread.jspa?messageID=10695921&start=1
They're not guaranteed to solve the problem, but they'll only take you a minute or so to try.

I recently replaced my dead airport router with a netgear91-5g router and synced it successfully to my Lexmark Pro 915 printer and my computer and yet when I try to print wirelessly I get the message: "printer not connected; printer offline".

I recently replaced my dead airport router with a Netgear91-5g router and synced it successfully to my Lexmark Pro 915 printer and my computer; yet when I try to print wirelessly I get the message: "printer not connected; printer offline". Lexmark support verified that my printer was connected to the new router and the problem was with the computer's printer configuration and they could reconfigure it online if I paid for their "Premium Support" services ($119 for one year, 3 fixes). I declined, feeling sure that this is something I could do if I knew how. Could it be an incompatability issue with OS 10.8.3?

You saved me $$$ that I can ill afford on my fixed income. I was very unhappy with the "support" from Lexmark... what a rip off! Thank you dwb!

I use pc windows 7 i downloaded new version fire fox i cant print wirelessly to my hp printer it is set as default when i chouse it from drop down it wont let me and it stays on the konica

i use PC windows 7 i downloaded new version fire fox i cant print wireless to my hp printer it is set as default when i chose it from drop down it wont let me and it stays on the konica after down load new fire fox and chose disable option not compatible

Many thanks.
With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

Cannot print wirelessly to a new HP B210 though configuration test is fine.

Cannot print wirelessly to a new HP B210 though configuration test is fine. It keeps coming up, "not connected" or "oof line". I have a 5 year old Linksys Router and connect perfectly to 2 iPads and a new Mac Pro wirelessly all over the house.

Based on what you just expressed, the hardware may be working. However, the software/ firmware is not functioning correctly.
Mario
I worked on behalf of HP.

Printer won't print even after putting new cartridges in

My printer quit printing black ink even though the printer said it was still 1/3 full. New cartridges were installed, however it is still not printing.

Hi , Welcome to the HP Forums! I understand that your HP Officejet pro 6835 printer, will not print even after putting new cartridges in. I am sorry to hear this, but happy to help! Please, take a look through this print quality guide: Printer Does Not Print Black Ink or Color Ink, or Prints Blank Pages. Hope this guide solves your problem for you, and have a great day!

Can't complete wireless setup for new router. Printer keeps looking for old router.

I'm not able to connect my printer to my new wireless modem. My printer continues to look for the older wireless modem. I'm using windows 8. In setup, when it gets to the window "change usb to wireless," my printer can't be found. I printed out the HP Network Configuration Page and it shows that the new network is "discovered." On the Diagnostics Summary, the "Wireless On" and Wireless Working" passes, but "Network Name (SSID) Found" is Fail.
Where in Win8 can I find my router properties? I might can enter the printer WPS PIN there, but can't find it! Thank you for any help!

@judyw217, Welcome to the forums!
I hope to help you with the connection issues you're having when trying to connect your Deskjet F4580 to your "new network" as you now have a new router. I have a few ideas in mind that you can try to get started!
First try power cycling the network devices. Sometimes all of the devices just need a restart!:
Turn off the printer and computer and unplug the router for 1 minute (do not press any buttons on the router).
Plug the router back in and wait another minute, next turn on the printer and computer.
Now check to see if your SSID is found (your network).
If the network is still not found, try running the Print and Scan Doctor on your computer to see if the tool can detect your printer and add it to the network.
If the printer is still not connecting to your router, check your router settings. If you need assistance checking the router settings, contact your router provider. I will let you know which options you are looking to check:
Network name and password to have no spaces or punctuation.
If using WPA2 security, switch to WPA personal.
Dual broadcast Wireless b/g/n (printer may connect to g).
Turn Mac Filtering Off.
Firewall settings need to be at there default settings, or set to a lower security.
Multicasting "on".
Following ports need to be un-blocked:
Incoming (UDP) ports : 137, 138, 161, 427
Outgoing (TCP) ports : 137, 139, 427, 9100, 9220, 9500
Just to add, here are instructions to help you with Setting Up the Printer for a Wireless Network for the HP Deskjet F4580 and F4583 All-in-One Printers
I hope this helps, let me know the outcome please!
If you wish to send me a "thanks for responding", click the thumbs up below!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

HT1695 I am trying to print wirelessly and get no air printer found. I have a new hp 3523 wireless printer but can't make it work with the new iPad. Do I need a special driver or is there another way for it to work

How do I set up so I can print wirelessly to my hp wireless printer.

Hi,
The printer do support AirPrint (the HP Deskjet 3525 is part of the 3520 Series).
Make sure your printer connected to the same router as your iPad and it shold be listed..
Be aware that you need iOS 4.2 or higher and your router should support Multicasting for AirPrint to work..
If the printer isn't listed please clarify your router brand and model, some routers don't offer Multicasting or have the protocol disabled by default.

HP 6520 won't scan with wireless connection and new router

My printer scanned fine before. Got a new internet provider=new router and now I can't scan scan anymore. The computer is connected wirelessly. The computer says it cannot communicate with the scanner. Same if I try from the printer front panel, it says it can't communicate with the computer.
The router seems like the obvious cuprit, but nothing in the router settings or manual suggest anything that could be blocking the scanner communications. The router firewall is turned-off.
Printing works fine, and I can connect to the printer through its IP address. The user interface can see the printer status, check ink levels, everything. Everything works but scanning. I've re-installed software multiple times, tried turning off firewalls and tried HP Scan and Print doctor. It's not much help.
I'm at wits end.
-ETC

Hello @etcottle , and welcome to the HP Forums!
I see you are experiencing scan connectivity issues. I would like to help!
I would recommend powering down your computer, disconnect the power cord from the printer and the power outlet, and remove the power from your router for 60 seconds.
After 60 seconds, plug the router back in. Once the router has begun broadcasting, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
After the printer is on, re-run the wireless setup.
I'd also suggest this document:
Wireless printing center Troubleshooting Issues
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Cant print document after lion installation with my fuji xerox printer

i cant print after lion installation with my fuji xerox c1110b printer, even after i remove and reinstall the driver.
in the print window under status indicate error,
for other program even the print button is not working, need help
thanks

As a temporary fix until the new driver, you can still use Generic PCL Laser printer selection to print black and white on Fuji Xerox C1110B. When adding the new driver, select Options & Supplies. When the new window rolss down, click on the middle Driver button. Then select Generic PCL Printer, and OK.
Maybe there is another substitute driver we can use to print in color as well until Fuji Xerox gets its act together?

I cant print wireless from my D110a ..It says its connected to wireless network.

I am unable to print wireless from my laptop to my D110 printer. The printer shows up, but wont print. the printer also shows that it is connected to wifi.

Can you describe the new home network?
What router brand?
What Modem?
What service provider?
10.59.1.250 is a valid home network address. You might check the address on the computer to make sure it is simular (10.59.1.xxx).
This sounds like it could be a router setup issue. Sometimes service providers set up router in a way that prevents the computers printer driver from seeing the printer. This might not match with the "It worked for 2 weeks" though.
Another possibility is that the printer got a new IP address and the computer hasn't been able to find it. Rebooting the cpmputer might fix that.
Still another possibility is that the printer is attached to some elses router. You might want to comfirm is it connected to your network and not another one in the area. If you used the default SSID on the new home network there might be another one in the neighborhood that is the same.
Treefrog
P.S. Be sure the old network equipment is not plugged in somewhere, unless you have changed its SSID.
Please mark the post that solves your problem as "Accepted Solution"
Sometimes it takes several posts back and forth to get to a solution - please be patient.
I am employed by HP

Printer not working with new router

I have a new router and my laptop with Windows XP is working Ok
My printer Deskjet 3520 network test result shows successful setup But it does not print when laptop requests
What can I do

Hi @Jobrig,
Welcome to the HP Forums!
I see that your HP Deskjet 3520 is not working with your new router, and I am happy to help with this connection issue!
For further assistance, I will need to know: if you are using a Windows or Mac Operating System, and the version number. To find the exact version, visit this link. Whatsmyos, and if the printer is able to make copies.
In the meantime, please see the following:
This printing guide, Print Jobs are Stuck in the Print Queue.
This website, HP Wireless Printing Center, may also help.
Hope these guides will help you, and thank you for posting!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Can't AirPrint after installing new router

After installing a new Virgin media router I can't print from my iPad or iPhone to my Airprint Epson printer. Works perfect from my Macbook pro on Lion. Worked fine before installing the new router on iPad and iPhone. Any ideas ?

OK fixed it. Had to Manually set up the printer to link to the wifi again from the printer control pad and now I can see it on my iPad and iPhone again. Good days.

Imac G5/Intel, OS 10.6., system does not start up after connecting new router

After connecting the imac to a new router the system hung completely up. After each input, e.g. opening preview or a browser, the coloured turning disc appeared and nothing happened anymore. Several restarts, also in safe mode, were unsuccessful. I could not switch to another user. Restart is only possible at all from installation disc but thereafter problem remains the same.
What can I do?

And, what happens if you disconnect the computer from the new router? Are you able to do this, and what happens when you try it?
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

Officejet 6500A Plus wont print wirelessly after a week

Set up the printer and it worked great for about a week. For the past day I get an 'unable to connect to the printer' message everytime I try and print. I've done the Wireless Network Test Report and everything seems to be fine but I can't print wirelessly.
I know I have Windows 7, and I think its the 64-bit version. HELP!!!

There would not be any interaction between the magenta ink supply and the black printing problem. It is possible the black ink supply was not properly seated in the carriage holder. If you have not already reseated the supply I would suggest that as a next step. Also check the ink warranty date as shown on this page, although it is unlikely that you have old cartridges. The other possibility is a large air bubble in the printhead. This could be cleared by running a couple printhead cleaning routines from the front panel.
If this does not resolve the issue I would suggest you Contact HP for warranty service.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Cant print wirelessly after getting new router

Similar Messages

Maybe you are looking for