Cant Recover from Time Machine after Yosemite upgrade

I have a 27" iMac (w SSD Drive) and after the initial Yosemite upgrade i had to uninstall because it hung trying to boot. After some help from Apple I lost all of the data and apps on my hard drive (thanks???). The restore utility (restart option r) restored me back to Mountain Lion. I wasn't concerned as I have a time machine. I tried to restore from Time Machine using command-r and it is said I don't have enough space? I retried the Yosemite upgrade which seems to be working fine (a couple of reboots and has been ok (cautiously optimistic. I Entered Time Machine and clicked on the last valid backup in the timeline (the time line shows many) and nothing? It should have scrolled backwards but it didn't (the bar highlighted red when I hovered over). I tried to use the little arrow to move back and it doesn't do anything? All I can do is cancel? Am I doing this wrong? Any suggestions?

Yosemite has to index the backup.. over wireless this takes days.. no kidding.. even over ethernet it takes a very long time.
Is the TM backup on a Time Capsule or on external drive??
How long are you waiting?? Please don't expect instant indexing even on fast external drive... and on wireless connection to a TC.. forever could be close to the time period.
If you had have asked before you started down this route.. I would have strongly recommended you take a bootable clone from the disk before you attempted anything.. Carbon Copy Cloner creates a reliable and easily tested backup since you simply boot from it.
Time Machine is now so hard to use, so unreliable when you change OS version.. it is seriously time to stop using Time Machine.. or at least supplement it with something more reliable.

Similar Messages

Can't restore from time machine after SSD upgrade

Macbook Pro 13" mid-2009, 10.7.5 Lion
I just swapped out my 160GB HDD with a 250GB SSD on my MBP. When I booted up, I pressed Command-R to try to get into recovery mode but all it does was showing a gray folder with a question mark on it.
I had previously backed up my HDD with time machine. My original HDD is no longer available because I tried to upgrade to Mavericks (since the command-R was not working) and upon restarting my MBP was locked with system pin code (that is another nightmare all by itself)
What are my options besides getting a 10.7 Lion CD from the apple store and try to boot it up that way? and then restore from time machine?
Any other way I can get into receovery mode?
Thanks (My MBP is now a brick sitting on my desk)

It's a bare drive so it isn't formatted and it doesn't yet have a Recovery HD installed on it.
Your computer originally came with a version of Leopard installed. You can reinstall it if you still have the original discs that came with the computer. Or, if you have a retail Snow Leopard DVD you can reinstall Snow Leopard from which you can then upgrade to Mavericks (Lion is no longer available for re-download.) It's unlikely your local Apple Store has a Lion USB flash drive or DVD although you can certainly make an appointment and ask for their help.
You should see if you can boot from the Recovery HD invisible image in your Time Machine backup drive. Connect it to the computer and use OPTION boot to get the boot manager. If you see a Recovery HD on your backup drive displayed, then boot from it.

I cant restore from time machine after mountain lion update

i recentlz went to Apple Geius to get my HD formatted as i had a corrupt disk. Once cleaned and my hardware all verified as OK, i got the apple store to load Mountain Lion, previously running Snow Leopard. I came home conneted to my time machine and it restored evrything that from this mornings back up no issues.
When i try to access time machine to look at previous days back ups i get error code 6584
also time machine shows no dated back ups beyond today.
Any ideas?
thxs
Simon

First, I strongly suggest that you make another full backup to a locally-attached external hard drive. You should do that anyway. One backup isn't enough to be safe, and backing up over a network is less reliable than backing up locally. Then try each of the following steps that you haven't already taken.
1. Restart the backup device. You can do that by disconnecting and reconnecting the power cord.
2. Hold down the option key and select Verify Backups from the TM menu in the menu bar (not the Dock icon.) This operation may take a long time. If the menu-bar icon (a clock that runs backwards) isn't showing, check Show Time Machine in menu bar in the preferences.
3. Erase the backup device. With a Time Capsule, you do that from within the AirPort Utility application; see its built-in help for details. All backups will be lost, so don't do this until you've backed up to another device. After erasing, select the TC again as a backup destination in the TM preference pane. The first backup should be made over a wired connection, if possible.

How to restore from time machine after HDD upgrade on macbook pro?

Hi,
I have recently bought a WD 2.5 inch SATA 750GB 7200RPM 16GB HDD and plan to use it on my macbook pro 13 inch 2.4ghz early 2011. I will leave the pysical installation part to Apple Service. I have my Time Machine backup on an external hard disk. So, once I get the upgraded macbook, what are the steps I should follow for a complete Time Machine restore? (Including the formatting on the new HDD).
One more question; when I transfer my applications to the new HDD will Time Machine "remember" their activation codes and license information ?
Thanks a lot.

http://web.me.com/pondini/Time_Machine/14.html
This has all the instructions for a complete restore, including how to format the disk. Pondini's site probably has anything else you want to know too.
Good luck!

I have Photoshop Elements 10 on a new Mac, using Yosemite 10.1.1 - PE locks up every time I try to sign in. This software was restored to this computer from Time Machine after a theft of my old Mac. How can I fix this?

I have Photoshop Elements 10 on a new Mac, using Yosemite 10.1.1 - PE locks up every time I try to sign in. This software was restored to this computer from Time Machine after a theft of my old Mac. How can I fix this? It keeps telling me that there are missing files, too. If I upgrade to Elements 12 or beyond, will this fix the problem?

You can't sign in because there is nothing to sign in to. For PSE 10 the only sign in was to photoshop.com, which has been dead and gone for a year and half. Just skip the sign in. Reinstalling will not change this.
PSE 8, 9, 10 Can’t Sign In, Error 404 | Barbara's Sort-of-Tech Blog
PSE is locking up because it's looking interminably for the non-existent photoshop.com server.

Does anyone know why since upgrading to ML notes are not visible in Time Machine. They used to be part of mail and could be recovered from Time machine but since ML I don't seem to be able to access notes in Time Machine. Any help would be useful.

Does anyone know why since upgrading to ML notes are not visible in Time Machine. They used to be part of mail and could be recovered from Time machine but since ML I don't seem to be able to access notes in Time Machine. Any help would be useful.

Welcome to Apple Communities
Mail doesn't support notes. If you use iCloud, you have them in it because Notes is an application

No recovery mode available when recovered from Time Machine

My MBP has been really annoying ever since I bought it last year; every 1-2 months, HDD file structure is completely messed up which is beyond Disk Utility's recovery capability.
So I need to restore entire system from Time Machine after formatting the internal HDD, but every time I do, there is no way to reboot it to the recovery mode (command + R) and always end up with the Internet Recovery.
The only way to get the recovery mode available again is, so far, download the entire OS again and re-install it.
But it is quite time consuming and I would like to minimize the complete recovery time (total recovery time including recovering files from Time Machine and re-install Mountain Lion mounts to 10 hours or longer and I need to do it roughly every month...)
Does anyone have any good way to avoid the re-installation step?
Thank you.

If your system will not load the local Recovery HD partition then you will need to download and reinstall the OS again to get it working (and likely both partition and format the drive as well).
If you are simply trying to restore a Time Machine backup, then you can use the Internet Recovery to do so, by choosing the option from the OS X Tools interface and then choosing a backup instance on your TM drive to restore.

How to restore files from Time Machine after Clean Install of Mavericks

How to restore files from Time Machine after Clean Install of Mavericks. I know the data is there but seems unaccessable because I may have changed the Computer or Owner name. Is there any way to fix that now?

Hi Linc,
my back-up data is managed by Time Machine; the actual data is on a second internal Hard Drive with a capacity of 1TB - not partitioned. I am using Time Machine and have access to all data backed up since Mavericks Clean Install but not the data prior to this date.
When I open the 1TB drive in Finder I can see a folder "Backups.backupdb/Sigi's Mac Pro/ followed by many folders of backup dates going back to 2010-09-20-103441 and up to 2014-02-07-142414 all followed with folder Macintosh HD. February 7th 2014 was the date of the clean install.
These Backups are followed by backup date folder 2014-02-08-075554 with a subfolder of MacPro-320GB (this is the name I assigned to my Boot Drive during formatting; I suspect I should have assigned the same name as before ie. Macintosh HD) and 2014-02-11 with a subfolder Macintosh HD, these are the ones I get access to by way of Time Machine > Restore.
Weird thing is on Febr 11 when I relised my possible mistake and renamed the Bootdrive back to what it was initially ie. Macintosh HD despite this I have access to all backup data since the Clean Install in both folders MacPro-320GB as well as Macintosh HD but not to any data prior to the Clean Install.
Is there something that Time Machine knows and prevents access or is it simply a matter of renaming the subfolder 2014-02-08-07554/MacPro-320GB to ........./Macintosh HD?
I like to restore selectively and not everything - It was hard work reinstalling apps that were supposed to be the troublemakers (ref my discussion on Maverick problems) but I now need to get onto data specific to some of these apps as well as other data I may have missed. Long story? Yes and sorry.
Sigi

OS 10.5.8 Leopard. Recovering old data from Time Machine after HD replacement.

Okay, I have and iMac dual core Model A1224, EMC 2210, 20" screen, 2.66GHz processor, 2GB RAM, came, when I bought it, with a 500 GB drive circa late 2008. The drive started to fail about 2 weeks ago, random shut downs, wouldn't boot up, couldn't find the OS. Could sometime recover booting up from the original OS disk in the C drive, but eventually even that failed. Had run disk first aid and TechTool Pro6 to no avail, they all passed the drive so it was a mechanical failure,not bad sectors.
REPLACED the drive with a brand new Seagate Barracuda 1TB drive, figured I was all set, Time Machine had backed up the old drive every day since 2009 to an external 1TB drive. I could even see the data there. Now new drive is installed and I need to load the OS to it and retrieve my data from Time Machine. Put in the old disk, Leopard 10.5.1, and walked along and asked it to bring in the data from Time Machine.... except, the data is saved on Time Machine in a new version of Leopard, ver. 10.5.8 and so the 10.5.1 version can't import it, but of course Migration Assistant will allow you to import it later.
So, I continue to load the OS via the disk, then go to software update after creating a new computer name, which I didn't want to do. Updated the software so I am now running OS 10.5.8, open Migration Assistant and attempt to migrate / recover the old data from Time Machine. I can get some stuff, but it insists on my resetting everything up all over again, all new accounts in Quicken and Thunderbird and Microsoft Office, no recovery of data already there and I can't access the accounts that were set up by others, it indicates I don't have sufficient privileges though I was an Administrator on the old computer and on the current system as well.
Frankly, I need that old data, so how do I get it? Do I bite the bullet and upgrade the system to Snow Leopard OS10.6.XX, will that allow me access to old data under OS 10.5.8? Will it be backwards compatible? How about moving up to Lion? Would that be a better way to go and will I be able to recover that old data then?
VERY frustrated here! Thanks for help or direction you all can provide.

HI,
Have you looked through Pondini's extensive TM help site?
http://Pondini.org/TM/FAQ.html
http://pondini.org/TM/Troubleshooting.html
Can't imagine what he hasn't covered!

System recovery from time machine after disk crash

Hi there,
recently I am a little unluky with my backup strategy. Here is my latest issue - I am glad if anyone has hints or advice.
On my macbook pro (mid 2009, originally SL) updated till the latest version of Mavericks I recently had a hard disc crash. I replaced the hard drive and wanted to restore my system (and data) from my time machine backup. This Backup is encrypted (in case this gives a hint for something).
What I did is I insert the Snow leopard disk, boot from it and first formated the new HD to the suggested standard for intel based MACs and then chose the option to restore from a time machine backup. I found the time capsule, connected with password, found the backed up files with date and tried to install.
First attemp failed.
Second attemp succed after 10h
Then with the mandatory reboot the system didn't start but stopped with:
panic(cpu 1 caller...
So I decided to install the SL system and try to restore from there in whatever way. Did that and 1 hour later the installation was successfully - Reboot - and then the computer asked for my Log in data (with my Log in Name - which I so far did not set on this installation or on this disk - very suprised. More suprised my password (which I use for 4 years now) did not work.
so back to option 1 try to restore from Time machine.
Ahead of that I reset the PRAM . Now I choose a backup version of an earlier date. This time the installation couldn't be finished but I got the log file.
I couldn't attach the file and didn't want to post it over severl pages...(is there a good way for that, only found adding pictures?)
Well - that's where I am stuck...
Any help is apreciated very much.

Thank you Eric for your fast answer.
this worked and now I have a running SL system. I guess I try to install maverics first and then use the emigration assistent to recover my data.
Still its a pitty that the time machine backup didn't do what it was supposed to. The workarround is very timeconsuming and leaves some concerns about my data and the future safety of time machine backups.
Regards
Thorsten

Restoring applications from time machine after a clean install of Mavericks.

I had recently upgraded from Mt. Lion to Mavericks from app store. But after few months I thought it was being buggy and slow. Last week after taking a complete time-machine backup I formatted the computer and clean installed Mavericks again. Now I am trying to restore just few handpicked applications one by one. Most of the apps are either not working or asking me for keys. Is there any other way to restore apps from Time Machine? Because all I see is that it just copy pastes the folder from the backup, and does not restore the prefe

If I were you, I would not restore your applications from the backup, more if you want the preferences back. Performance issues will be back and you may need to reformat the hard drive again.
Instead, the best thing you can do is to reinstall your applications manually, so you will not be transferrind files you do not need

Can't restore folders from Time Machine after Lion

Hello guys,
after upgrading to Lion 10.7.1 I can't seem able to restore some old folders from Time Machine
Here's what happens: I log in TM, I can scroll through my old backups, I can choose the folders I want to restore, I can click on the folder, but when the systems tries to restore it, it stops saying that I don't have the privileges to access file A in the folder (and then all the procedure is stopped).
Oddly (at least for me) if I try to restore just that same file A (and not the whole folder) that I should have no privileges for, from the same old backup, I can do it, but I have to give the system my password: It pops up a window saying something "Finder is willing to make some modification, can you authorize?" (forgive i'm translating the alert from another language) and then I can restore it.
Has anybody else this problem and how can be solved?
Many thanks
Ps: I did a simple upgrade on Lion, no partition, no blank disk, and never changed anything in my user preferences, it's always the same, administrator
Pps: Before Lion I could restore easily exactly the same folders and files I tried to restore with Lion

wrongusername wrote:
But if I transfer everything with the Setup Assistant, won't I once again be experiencing the problems I had?
If the problems were caused by your data. But that's extremely unlikely. It may have been an app, or, much more likely from your description, something corrupted in the Leopard OS. That's one of the problems with upgrading a sick system without knowing what or where the causes are. It's a bit like a brain surgeon operating on himself: if he isn't in tip-top shape to start with, his condition is likely to change, and not for the better.
Most of us would have recommended first simply doing a +*Repair Disk+* on your internal HD; if that didn't help, installing the "combo" Leopard update; if that didn't work, doing an +Archive and Install+ and re-installing the "combo."
After a clean re-install of Snow Leopard, my Mac worked fine again (except for the TM trouble). So it probably had something to do with my old files.
Probably not. Much more likely OSX was somehow damaged. And you got a whole new one.
How come I could read the files on my external HD and yet not be able to copy the files?
Time Machine uses special "deny everybody everything" permissions on it's backups, among other things, in an attempt to keep us mere mortals from moving, changing, or deleting things and corrupting them.

Retrieving files from Time Machine after updating to Snow Leopard

Updated my 2 year old iMac to Snow Leopard and erased the hard disk first to do a clean start. Having carried out all the updates and loaded on iLife11 tried to use the migration assistant to retrieve data from Time Machine backup but will only find the updated iMac! How do I get it to retrieve from previous Time Machine backups? Know they are on the external Hard Drive somewhere as it still has 400GB on it. Thanks

+Setup Assistant+ and +Migration Assistant+ automatically use the most recent backup. There's no choice. See #19 in [Time Machine - Frequently Asked Questions|http://web.me.com/pondini/Time_Machine/FAQ.html] (or use the link in *User Tips* at the top of this forum).
Your best bet is to do a +full system restore+ per #14 in the FAQ. Choose the last backup before the upgrade. That will, of course, put you back on Leopard.
Then just install Snow Leopard (there are no +Erase and Install+ or +Archive and Install+ options anymore). That will install the new version of OSX, without touching anything else.
Potential problems with using +Migration Assistant+ (after setting-up a user account), are that you end up with an extra account; and the accounts you migrate may not be recognized as the same ones as on your backups or other volumes, and won't have the proper permissions to them.
Message was edited by: Pondini

Reinstall from time machine after hdd replacement

Hi all
I have just upgraded my hdd n my mac book pro and just before removing the old hdd I let time machine run
After replacing the hdd I booted up the machine with a lion bootable DVD and then created a new Parton on the new hdd using disk utility
On running the lion installer I was able to choose the option to restore from time machine backup but the most recent backp it could find was one from august last year and not today which is what I expected
I now have the machine Running with the new hdd but I am missing all files etc between the state restored by tm and today
How do I get the machine back to the state it was before I removed the old hdd?
Thanks in advance
Simon

Had you ever erased the disk, or done a full restore previously? If so, the older backups are treated as if they wer on a different drive. Try a full system restore, and see if there are two disks listed in the "pop-up" Restore from menu per step (g) in Time Machine - Frequently Asked Question #14. If so, each should have a different set of dates.

Selectively restore from Time Machine after reformatting

I just reformatted my drive and reinstalled Mountain Lion and then upgraded to Mavericks. I backed up to Time Machine just before the reinstall. Time Machine did combine my first new backup with the ones before the reinstall, which I can see when I browse through the Time Capsule.
I would like to restore some things from the Time Machine timeline, however when I enter the timeline, the backups prior to the reinstall are named in purple on the dateline and the Finder windows are black and inaccessible. I suspect this is because after the reinstall the computer has a new account name, so the permissions are different on the previous backups with the old account name.
Does anyone know how to get the older backups to be accessible in the timeline? I would like to just selectively restore a few things as needed, and would like to do the "restore from Time Machine" rather than drag copying files from the mounted backup.

I would like to just selectively restore a few things as needed, and would like to do the "restore from Time Machine" rather than drag copying files from the mounted backup.
For this type of activity, you might want to take a look at Migration Assistant on your Mac, located as follows:
Macintosh HD > Applications > Utilities > Migration Assistant
More info here: OS X: How to migrate data from another Mac using Mavericks

Cant Recover from Time Machine after Yosemite upgrade

Similar Messages

Maybe you are looking for