Cant Report That Noisy Line Affects All Of Our Nei...
With the BT fault system I can't report that a very noisy line affects all of our neighbours as well as us.
At least two of us have reported it individually, but it doesn't get investigated as the line check says it's OK.
When an engineer came some time ago he said that we really need extensive rewiring to our neighbourhood, but it's not likely to ever happen.
I can just use a dialup modem for a few kB/s email use, but there's no chance of broadband (which is at the exchange, at the nearest village).
Neighbours and I find it almost impossible to hear some callers, and don't chat at all. I have an amplified phone, but the noise gets boosted as well to mask the voice signal. For making calls I always now use Vodafone by mobile, which has an excellent signal (but only 2G so no use for Internet).
Because broadband from BT won't work, at least five houses have gone for satellite providers, even though they are slow and expensive.
Is there any way to get BT to solve a collective problem, rather than just ignore individuals whose needs must seem insignificant?
Gordon
Dutyhog wrote:
Thanks, Keith. So how do we let OpenReach know about it apart from many of us filling in the form on the BT faults page, or phoning BT and hoping that it gets passed on?
Thanks also for the link to help, but I get the message:
Sorry - You must be connected to BT Broadband or the BT network to use this website.
This is a private website for the benefit of BT Broadband customers who use the
BT Customer Support Community
website, and is not connected with BT.
If you are visiting this site from a BT Broadband or BT Corporate connection, and are getting this message,
then please contact me via the BT Community forum, and tell me the date and time of your attempt.
Thanks
Keith Beddoe
Gordon
Are you visiting my link from a BT Broadband connection, if so, could you please visit this site.
http://www.whatismyip.com/
And tell me what your public IP address is. I can then check it against my database.
Thanks
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.
Similar Messages
-
USELESS ONLINE HELP FACILITIES
For all the amazing productivity aids that APPLE offers the world I have to report that their online support service is worse than useless and has recently been the source of immense time wasting and irritation.
Incident 1. Since many months attempts to download new and updated APPs produced a response – Apple ID Disabled. I had no time to consult an APPLE Store due to work in distant lands. When I finally visited yesterday I was told that as my IPAD has been reported as stolen, and APPLE in its wisdom had blocked its usage! I am not sure how they became so misinformed and nobody every advised me while with a few swift moves APPLE could have located me by email address or SKYPE.
Incident 2. Once the above anomaly had been fixed I tried to down load a newspaper and diligently input my address, credit card number and personal data. Repeatedly I was advised that my Credit Card was invalid and my postal code was incorrect! Really!
I was left to guess that having moved from UK to the US I should have advised APPLE! Not being told of this requirement brought about a second visit to APPLE Store in the same day to waste both mine and their time with a routine anomaly. How parochial in the context of a globalized world!
In each case I tried to resolve the issues using online access to a help line and by calling by phone at the numbers on the APPLE Website. In each of four separate occasions I diligently went through the routine and ended up with a message that thanked me for contacting Apple followed by a polite ‘Good Bye’!
In desperation I went to an Apple Store for the second time in a day as it is close to where I live when I am not working. On both occasions I was courteously attended to by Apple Staff.
However, my work is usually far away from the US and it is generally many thousands of miles to the nearest Apple Store therefore online help is viewed as imperative if one is to resolve issues away from home.
Why can Apple not provide a clearly marked EMAIL address and Telephone number at a Help Desk with real people to respond to requests for help? It would cost nothing in relative terms and might restore my high level of anti-APPLE sentiment that these two recent events have provoked.
Peter Hanney
Miami, Fl.Why can Apple not provide a clearly marked EMAIL address and Telephone number at a Help Desk with real people to respond to requests for help?
If that is your question, the answer is at the bottom right of this web page. It is clearly marked "Contact Us" and is the best way, really the only way, to contact Apple.
If there were a publicly posted email address for concerns such as yours, it would be quickly filled with spam in about three minutes, thereby becoming instantly useless to you and everyone else. Apple would need to change it hourly, if not more often. That is also the reason you ought not to post your name, location, and what appears to be your iPad's serial number on this publicly viewable website.
Apple does not respond here and I can find no other questions for your fellow Apple users to answer. -
Hi all report that sends email shows popup window needs to be supressed
hi all
i have developed a report that sends email as an attachement, but this report pops up a window in the end ( it says 'no of objext sent') and there i have to press enter, but my report is running in the background (scheduled report) and therefore there should be no pop ups in the report.
question is how to avoid popup window in the following program.
below is my code
just enter your email id in the code and it will run anywhere.
TABLES: ekko.
*PARAMETERS: p_email TYPE somlreci1-receiver
DEFAULT '[email protected]'.
TYPES: BEGIN OF t_ekpo,
ebeln TYPE ekpo-ebeln,
ebelp TYPE ekpo-ebelp,
aedat TYPE ekpo-aedat,
matnr TYPE ekpo-matnr,
END OF t_ekpo.
DATA: it_ekpo TYPE STANDARD TABLE OF t_ekpo INITIAL SIZE 0,
wa_ekpo TYPE t_ekpo.
TYPES: BEGIN OF t_charekpo,
ebeln(10) TYPE c,
ebelp(5) TYPE c,
aedat(8) TYPE c,
matnr(18) TYPE c,
END OF t_charekpo.
DATA: wa_charekpo TYPE t_charekpo.
DATA: it_message TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0
WITH HEADER LINE.
DATA: it_attach TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0
WITH HEADER LINE.
DATA: t_packing_list LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE,
t_contents LIKE solisti1 OCCURS 0 WITH HEADER LINE,
t_receivers LIKE somlreci1 OCCURS 0 WITH HEADER LINE,
t_attachment LIKE solisti1 OCCURS 0 WITH HEADER LINE,
t_object_header LIKE solisti1 OCCURS 0 WITH HEADER LINE,
w_cnt TYPE i,
w_sent_all(1) TYPE c,
w_doc_data LIKE sodocchgi1,
gd_error TYPE sy-subrc,
gd_reciever TYPE sy-subrc.
*START_OF_SELECTION
START-OF-SELECTION.
Retrieve sample data from table ekpo
PERFORM data_retrieval.
Populate table with detaisl to be entered into .xls file
PERFORM build_xls_data_table.
*END-OF-SELECTION
END-OF-SELECTION.
Populate message body text
perform populate_email_message_body.
Send file by email as .xls speadsheet
PERFORM send_file_as_email_attachment
tables it_message
it_attach
using " p_email
'Example .xls documnet attachment'
'XLS'
'filename'
changing gd_error
gd_reciever.
Instructs mail send program for SAPCONNECT to send email(rsconn01)
PERFORM initiate_mail_execute_program.
*& Form DATA_RETRIEVAL
Retrieve data form EKPO table and populate itab it_ekko
FORM data_retrieval.
SELECT ebeln ebelp aedat matnr
UP TO 1 ROWS
FROM ekpo
INTO TABLE it_ekpo.
ENDFORM. " DATA_RETRIEVAL
*& Form BUILD_XLS_DATA_TABLE
Build data table for .xls document
FORM build_xls_data_table.
CONSTANTS: con_cret TYPE x VALUE '0D', "OK for non Unicode
con_tab TYPE x VALUE '09'. "OK for non Unicode
*If you have Unicode check active in program attributes thnen you will
*need to declare constants as follows
class cl_abap_char_utilities definition load.
constants:
con_tab type c value cl_abap_char_utilities=>HORIZONTAL_TAB,
con_cret type c value cl_abap_char_utilities=>CR_LF.
CONCATENATE 'EBELN' 'EBELP' 'AEDAT' 'MATNR'
INTO it_attach SEPARATED BY con_tab.
CONCATENATE con_cret it_attach INTO it_attach.
APPEND it_attach.
LOOP AT it_ekpo INTO wa_charekpo.
CONCATENATE wa_charekpo-ebeln wa_charekpo-ebelp
wa_charekpo-aedat wa_charekpo-matnr
INTO it_attach SEPARATED BY con_tab.
CONCATENATE con_cret it_attach INTO it_attach.
APPEND it_attach.
ENDLOOP.
ENDFORM. " BUILD_XLS_DATA_TABLE
*& Form SEND_FILE_AS_EMAIL_ATTACHMENT
Send email
FORM send_file_as_email_attachment tables pit_message
pit_attach
using "p_email
p_mtitle
p_format
p_filename
p_attdescription
p_sender_address
p_sender_addres_type
changing p_error
p_reciever.
DATA: ld_error TYPE sy-subrc,
ld_reciever TYPE sy-subrc,
ld_mtitle LIKE sodocchgi1-obj_descr,
ld_email LIKE somlreci1-receiver value '[email protected]',
ld_format TYPE so_obj_tp ,
ld_attdescription TYPE so_obj_nam ,
ld_attfilename TYPE so_obj_des ,
ld_sender_address LIKE soextreci1-receiver,
ld_sender_address_type LIKE soextreci1-adr_typ,
ld_receiver LIKE sy-subrc.
ld_email = p_email.
ld_mtitle = p_mtitle.
ld_format = p_format.
ld_attdescription = p_attdescription.
ld_attfilename = p_filename.
ld_sender_address = p_sender_address.
ld_sender_address_type = p_sender_addres_type.
Fill the document data.
w_doc_data-doc_size = 1.
Populate the subject/generic message attributes
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle .
w_doc_data-sensitivty = 'F'.
Fill the document data and get size of attachment
CLEAR w_doc_data.
READ TABLE it_attach INDEX w_cnt.
w_doc_data-doc_size =
( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle.
w_doc_data-sensitivty = 'F'.
CLEAR t_attachment.
REFRESH t_attachment.
t_attachment[] = pit_attach[].
Describe the body of the message
CLEAR t_packing_list.
REFRESH t_packing_list.
t_packing_list-transf_bin = space.
t_packing_list-head_start = 1.
t_packing_list-head_num = 0.
t_packing_list-body_start = 1.
DESCRIBE TABLE it_message LINES t_packing_list-body_num.
t_packing_list-doc_type = 'RAW'.
APPEND t_packing_list.
Create attachment notification
t_packing_list-transf_bin = 'X'.
t_packing_list-head_start = 1.
t_packing_list-head_num = 1.
t_packing_list-body_start = 1.
DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
t_packing_list-doc_type = ld_format.
t_packing_list-obj_descr = ld_attdescription.
t_packing_list-obj_name = ld_attfilename.
t_packing_list-doc_size = t_packing_list-body_num * 255.
APPEND t_packing_list.
Add the recipients email address
CLEAR t_receivers.
REFRESH t_receivers.
t_receivers-receiver = ld_email.
t_receivers-rec_type = 'U'.
t_receivers-com_type = 'INT'.
t_receivers-notif_del = 'X'.
t_receivers-notif_ndel = 'X'.
APPEND t_receivers.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
EXPORTING
document_data = w_doc_data
put_in_outbox = 'X'
sender_address = ld_sender_address
sender_address_type = ld_sender_address_type
commit_work = 'X'
IMPORTING
sent_to_all = w_sent_all
TABLES
packing_list = t_packing_list
contents_bin = t_attachment
contents_txt = it_message
receivers = t_receivers
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
Populate zerror return code
ld_error = sy-subrc.
Populate zreceiver return code
LOOP AT t_receivers.
ld_receiver = t_receivers-retrn_code.
ENDLOOP.
ENDFORM.
*& Form INITIATE_MAIL_EXECUTE_PROGRAM
Instructs mail send program for SAPCONNECT to send email.
FORM initiate_mail_execute_program.
WAIT UP TO 2 SECONDS.
SUBMIT rsconn01 WITH mode = 'INT'
WITH output = 'X'.
AND RETURN.
ENDFORM. " INITIATE_MAIL_EXECUTE_PROGRAM
*& Form POPULATE_EMAIL_MESSAGE_BODY
Populate message body text
form populate_email_message_body.
REFRESH it_message.
it_message = 'Please find attached a list test ekpo records'.
APPEND it_message.
thanx
rockyhi rocky,
pls comment the submit program form INITIATE_MAIL_EXECUTE_PROGRAM by default the email runs in background and there is no need to submit 'rsconn01' it again to that program where u actually get the pop-up...
try it
hope this helps
regards,
karthik -
A report that lists all non-exempt employees that do not have a supervisor
HI all,
Please help. This is urgent.
bold "A report that lists all non-exempt employees that do not have a supervisor assigned in R/3." bold
I have already selected non-exempt employees but don't know how to select people who do not have a supervisor" What selection criteria I should choose in the ad-hoc query
Thanks a bunch,
RashmiHi
Actually its not that difficult. You can give a criteria in selection where relationship A002 is equal to a space . Replace A002 in this example with the relatioship you have defined for 'Reports(line) to'.
Regards
Waz -
Hi. My itunes library is in current 10.5.2 but my old ipod touch 4th or 3rd gen is not updating at all its still in current 4.2 and there is some apps i cant download that requires a 4.3 update but in my itunes it wont. Please help!
Are you sure you have a 4g/3g iPod? If you don't have a camera, it's definitely not 4G. If it has no camera and is 8 or 16 Gb it is a 2G and can't go beyond 4.2.1.
-
Vendor report that shows all vendors missing tax id information
I would like to create a report that shows all vendors that are missing the tax id information. Please direct me on where to go.
thx
TraceDear,
Enter T-code MASS.
Select Object Type LFA1 and click on execute button.
Than click on Fields tab, Find your required field and click on execute button.
Than enter vendor list for which you want to find out the list.
And click on execute button.
Regards,
Mahesh Wagh. -
Can we create a report that show us all comments created for a specific MP
Hi All,
I have created documents for multiprovider.
Now, I want to know whether we can create a report that shows all the documents created on this multiprovider or not.
Your help will be rewarded.
Regards,
Haritha.Check out this post: http://forums.adobe.com/message/4399918#4399918
You can use skip logic to get the desired effect. If you have problems do it just reply back.
Randy -
In need of a report that will list all vendors for all parts in our plant.
Can anyone tell me if there is a report in SAP that we can use to list all suppliers for a given material? We are operating in SAP ECC6.0 and need a report that will list all vendors that the company has used for a given part. Is there a standard report in SAP that pulls information from purchasing info records? Woud this be a custom report? I have tried using MCE3.
Also does anybody know of any SAP consultants that can help us create custom reportsFor the list of vendors for the material - Me03 if source list is maintained
For list of vendors with info record - Me1m
For list of vendors with PO - Me2l
If you can give the correct requirements then your Technical consultant will develop a report in the required format. -
A Standard RRB report that shows actual project cost line items but that also shows amount/qty by rejected, billed, to be billed, postponed?
I'm looking for something that will allow project managers to reconciile with the RRB totals and be able to dril in a see a level detail not available in RRB to decide what should be billed, what should should be deferred (postponed) and what should be rejected out of hand.
Thanks.Thanks Virendra Pal but the VAx5 reports are not really the answer - maybe a custom report will be required right enough.
-
Screen or Report that shows all Responsibilities for Org Unit
How can we find out in Oracle application from the front end,,,, the screens... or may be report that shows all responsibilities for ORG Unit ‘Vision Operation’ (204).
SELECT FR.RESPONSIBILITY_NAME, FPOV.PROFILE_OPTION_VALUE ORGID, NAME ORG_NAME
FROM FND_PROFILE_OPTIONS FPO,
FND_PROFILE_OPTION_VALUES FPOV,
FND_RESPONSIBILITY_TL FR,
HR_ALL_ORGANIZATION_UNITS HOU
--HR_OPERATING_UNITS HOU
WHERE --UPPER (FPO.PROFILE_OPTION_NAME) LIKE UPPER ('MO%OPERATIN%')
PROFILE_OPTION_NAME = 'ORG_ID'
AND FPO.PROFILE_OPTION_ID = FPOV.PROFILE_OPTION_ID
AND FPOV.LEVEL_VALUE = FR.RESPONSIBILITY_ID
AND HOU.ORGANIZATION_ID = FPOV.PROFILE_OPTION_VALUE
the above query displays the data from the backend,,I want to see how to see that data from the front end,, does anyone know the navigation, thank you so much in advance.Hello Kashif,
Thank you for the reply. So, there is no screen that shows all the responsibilities that are assigned to a operating unit.
The link that you provided really did not give any information that i was looking for.
And as you said .. "there is no specific screen to show all except responsibilities form".... what does the responsibilities form show,
I have also tried to look in the System Administrator -> Profile -> System
and in the Responsibility, I query for Payables manager, and look which Orgs are assigned to it, I am not able to find it. I know I am wrong, but can you please help me how to see which responsiblity is assigned to which Operating Unit.
Thank you -
Hi i have an ipod apple shuffle it was stollen and i recovered it now i cant acces my old music,and all the details that were inside it,these person deleted my stuff and installed his please help
This is an Enterprise iPhone forum. You will get more imediate assistance by going to the correct forum.
-
Cost Centre report that shows all Tax Codes
Hi there,
We're trying to run a cost centre report that shows the tax codes relating to all expenditure, but Tax Code isn't an option in KSB1. Is there a way that it can be imported, or another report that we can use?
We need the tax code in order to be able to report on expenditure and tax paid / not paid for HMRC.
Thanks,
MichelleHi,
Cost reports KSB1 show only CO documents posted on cost centres. You can reconcile CO data with FI only for accounts which are relevant for CO, that is accounts defined as cost elements (normally, these are P&L accounts). If you want to see all CO documents, it's better to use KSB5 transaction as it shows all CO object postings, and not only cost centres. If you have some internal CO postings (manual postings, allocation, etc.), then they won't be shown in FBL3N and you have to consider this also.
Regards,
Eli -
How/can I use boe search 4 all reports that use specific tables
How/can I use boe search 4 all reports that use specific tables
can this be done with query builder
or
is there a way to search all sql of all reports for specific strings and report names so that I can find all report sql that uses table1 for example?Hi Bart!
You can use VBScript to extract the dataprovider within the reports (Search for SDK Desktop Intelligence).
If you can wait a few days longer, I can provide my script.
ciao Hakan -
i cant authorize my pc on windows 7 it tells me that my account is temporary unavalible and to deautorize all the computers i have to wait untill may 2012 i cant wait that much longer everybody knows a solution?
Re: That garbage is unreadable.
If you really want help, stop messing with the fonts and post so that others can read and offer suggestions.
Or better yet... try a search, I'm certain you'll find a solution to whatever issue you're experiencing.
I have found that many times it is the things that make you most angry that push you to action. This was the case here. Thank you for causing me to get so angry that I found the answer myself. -
when I copy an artist over to itunes and that particular album has multiple albums, it does not separate the albums but lines up all of the songs...such as all the 1's..then 2's and so on. How do I fix that?
JPSchrader wrote:
when I copy an artist over to itunes and that particular album has multiple albums...
Should that read "when I copy an artist over to itunes and that particular artist has multiple albums," because if not, I don't understand?
If I'm right about that, I'm still not really clear at all about what you're doing. Where are you importing these songs and albums from? Is it existing songs files and if so, what format are they in?
Maybe you are looking for
-
I am noble to watch YouTube videos. This is just a recent problem. Any fixes please?
-
I accidently put my old 2nd generation Ipod nano through the washer a few years ago. Well after that it would no longer work do to water damage. After a while i got a new Ipod (the same type) and was able to get new songs to put on it and what not. W
-
Hi, as it says above, my wife and I have an iphone each with different content on each. How do I upgrade the IOS on my wife's phone without syncing all the content on my phone? Do I need a separate apple ID for my phone? If so, how do I set this up w
-
How do I open a iBook document in adobe
Opening a I book document in adobe , I cannot add a existing book in iBook in the adobe reader
-
Material Consumption for internal purposes
Hi all gurus I'm facing this issue: one of my customer uses some of their products for internal consumption. Obviously this consumption erodes stock and its valuation. Simply there's no economic transaction so there's no sell no delivery no invoice.