Cant reset ipod touch... when i try to reset... the screen blinks, and it makes a camera sound ???/ any ideas
when i try to reset ipod by holding home button, and the lock button on top... my screen flashes and makes a camera sound... but my touch doesnt have a camera ???
hahaha what you're doing is taking a photo of your device screen..That's not actually a problem, That's Normal..
here's what you should do.
Try pressing the restart/off button only, wait for seconds until the "Slide to Power Off" appears. Do no press the home button. After you turned off your device, try pressing once the Power button again to turn your device On.
Similar Messages
-
My iphone 4s will not connect to networks. the button is greyed out and cannot turn on. I have reset the network settings and it still does not work - any ideas?
Thank you I tried the reset again did not fix- I think I am down to calling Apple and paying for a tech - phone company says it is a software problem. I just updated to 8.1.3 - I thought the update might fix it.
-
Hi can anybody help me please my grand daughter had changed the pass code on my ipod touch and now forgotten it is there anyway i could bring it back to the begining like when i first got it. I cant access anything and i cant sync it to itunes either.
Hello Corinnana,
Yes. Connect the iPod to your iTunes library in Recovery Mode and restore it as a new iPod. See this article for instructions on how to place your iPod in Recovery Mode.
http://support.apple.com/kb/ht1808
B-rock -
help
If the iPod is only sleeping (not powered off), the iPod is still doing things like checking for mail, checking its location and other things.
-
I am trying to import a .xml file into FCP; it asks for a translation document file. Any ideas on how to proceed? Thanks
What kind of xml? What kind of xml?
Shane is right if it's an xml exported from finalcutpro but there are many other kinds/uses for xml, most of which will not import into fcp. -
I have an ipod touch 8gb that is disabled. on the screen it reads ipod disabled connect to itunes. But when i connect it to itunes, it says that it cant work with the ipod because it is locked with a passcode. what now?
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
The previous responses did not say how to place in recovery mode or DFU mode -
I have tried to reset and restart my iPod touch but it remains stuck at the apple logo and turns off. The iPod is not responsive when i connect it to my computer or wall charger.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Please help! I can power the device off but when i try to unlock the screen its like it cant feel my finger tracing over my unlock design, thus I cannot sign into itunes to download what i have before I possibly loose everything My warranty is expired and I dont know if there is any other solution before I dump a bunch of money into this devise. ThaNK YOU!
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
I had to get a new ipod....they said I just needed to plug it in and sync to my itunes.. I get an error 1413 when I try to follow the instructions to restore. I can't find any information on error 1413, what does this mean?
Now it keeps saying that it is restored but there is still no music or video on it. And a new error is coming up that says "We could not complete your iTunes store request.The iTunes Store is temporarily unavailable. Please try again later."
-
My computer can not recognize the new Apple iPod touch when it is connected via the USB cable (that goes with it) attempt to attach it to the computer.
You do have iTunes installed right?
See:
iOS: Device not recognized in iTunes for Windows -
I can not recharge my Ipod Touch, when I connect it to the computer or the power cord. What do I do next to recharge the battery?
See the not-charging topic of:
iPod touch: Hardware troubleshooting -
when i turn on my ipod touch dosent work i see in the screen ipod desactived and when i connect itunes please i need help
See here:
iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen -
HT1430 Ipod touch (5th generation) w/ lines across the screen - now dead.
My son's Ipod touch (5th generation) had lines across the screen. I turned it off using the home + on/off button reset, but the apple never came back on. Now it seems to be dead. Not dropped, not completely drained, no water damage. Just dead. Any ideas?
I have also tried plugging it into my Macbook Pro, and iTunes does not find it.
ITunes is up to date.Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
My iPod Touch 3rd gen is screwed up the backlights screwed and the Wifi is not working its showing no wifi!
See:
iOS: Wi-Fi or Bluetooth settings grayed out or dim
One user reported that placing the iPod in the freezer fixed the problem. A trick that works frequently with iPhones:
Settings > AirPlane Mode ON, Do Not Disturb ON
Power down and wait 5-10 minutes
Power up
Settings > AirPlane Mode OFF, Do Not Disturb OFF
If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
Apple Retail Store - Genius Bar
For backlight
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
ipod Touch 5th generation. I changed the original passcode and then forgot, so it says 'iPod is disabled'. It hadn't been synced with iTunes, so I switched it off, held home button, connected to Mac, did restore on iTunes twice but it doesn't work. Help!
Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Maybe you are looking for
-
Bug: Music app name in app drawer not displayed correctly in my language
After the app name changed from Walkman to Music, in app drawer the name in Greek is "Μουσ." insteed of "Μουσικη" and in all other apps the titles are full without any "." If phone language is changed to english or other languages the "Music" is disp
-
CAN I USE VERSION 5.0.4 ON MY NEW iMAC?
THE OLDER VERSION IS MUCH MORE USER FRIENDLY IN MY OPINION. VIEWING THE ENTIRE LIBRARY WITH NEW IMPORTS AT THE BOTTOM OF THE SCREEN WITH THE OPTION OF CLICKING & DRAGGING TO AN ALBUM IS SIMPLE & FAST. I LIKE TO CLICK ON PHOTOS/BATCH CHANGE/TEXT & NAM
-
I am using a Java bean that the developer said that they would pass me an unbuffered image and to use awt to convert that into a .jpg image. I am having a hard time understanding how to access the unbuffered image and then what to do with it. I know
-
Hi Gurus, Please help me with the code. Algorithm: This is for master data extraction. I need to append some records to I_T_DATA before the loop on I_T_DATA begins. ZTAB is a custom defined table with key KEY. STAB is standard table with key KEY. 1.
-
SQL - Database access using Oracle.connect(getCLass(), "connect.properties")..IM LOST
Hi, I use Oracle.connect(getClass(),"connect.properties") before all of my #sql statements. If there are a bunch of methods with #sql statements, I use the connection method. I think this is my problem and Id like some feedback from other people. 1)