Cant resolve the host name in mac
cant resolve your hostname then do the following work around:
sudo vi /private/etc/hosts
create the entry with IP and hostname ....no need of domain..
cant resolve your hostname then do the following work around:
sudo vi /private/etc/hosts
create the entry with IP and hostname ....no need of domain..
Similar Messages
-
Error code "Couldn't resolve the host name"
I cannot access internet from tablet
WiFi shows connected
noticed this yesterday
any suggestions on how to fix errorDid you manually setup your wifi. Can not resolve host name usually means a problem with the dns. Which router are you using?
Be a Shepard and not an iSheep. -
Error-couldn't resolve the host name
Receivd this message when trying to connect to the internet. any suggestions? tried restarting tablet..still not working.
That sounds like a DNS error.
Go to your Options > WiFi
Click on the Wifi icon with the question mark on it. Then use the drop down box and select Internet connection. You'll see your DNS settings. Make sure that you have stuff there and that they are valid.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Error - couldnt resolve the host name - anyone know how to fix?
Solved!
Go to Solution.Something in the DNS chain cannot convert from the english web page name into an IP address.
In Browser pull down settings, Privacy and Security., Clear all.
Restart Playbook.
Restart router.
It may clear itself if your suppliers DNS servers are choked. -
Couldn't resolve the host name (AGAIN!!!!​)
I get this error alot! I've searched all kinds of forums and tried so many things that sometimes work (e.g., clear cache, restart). This is a common problem that renders the Playbook useless. It's so frustrating when you need to quickly jump online to check something and have to spend 20 minutes troubleshooting. What's the point?
According to my Wi-Fi tab, I'm connected and everyone else in the house is able to access the Internet without a problem (they have Apple products, I'm an die-hard but slightly embarrased RIM fan).
Does anyone know how to get around this error?Last time I had this issue was at a hotel and kept tapping the link and it worked
At home I switched to opendns.org as my ISP DNS was overloaded
Look at my tips on wifi
Speed-up-BlackBerry-Wi-Fi-connections-a-knottyrope-tip
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V -
The host name cannot be resolve ? ( with linksys router )
Hi all, I have some problem with setting up a network. I tried to set my network according to http://wiki.archlinux.org/index.php/Configuring_network the network/internet is fine except the host name with "http://" cannot be resolve. For example
ping 216.239.61.104
ping www.gogle.com
both work fine, until I try,
ping http://www.google.com
it give me error, tell me that the hostname cannot be resolved. I tried to config my network using both dhcp or fix-ip, but the problem still present in both way. Internet works fine in windows/ubuntu.
Anyboy has any clue ? The router I use is wrt54gl with tomato firmware.
thanks in advance.kowalski wrote:
Hi,
if pinging www.google.com works then dns resolving _does_ work. Why would you want to ping http://something?
You should try opening http://whatever in a browser not pinging it from command line.
Or am I missing something obvious?
Yes, for instance, all mirror list for pacman is in "http://...." or "ftp://...." form. I could easily change the repository list, but I'm not sure if it'll have same problem in future with other program. Also, if it work in ubuntu and windows, why not arch. -
How to resolve a host name from IP using JNDI/DNS service provider
Hi
I got two questions on JNDI/DNS service provider:
1) How to resolve a host name when i got an IP
I understand How I do it inverse.
Hashtable env = new Hashtable();
env.put(Context.INITIAL_CONTEXT_FACTORY, "com.sun.jndi.dns.DnsContextFactory");
env.put(Context.PROVIDER_URL, "dns://"+server+"/"+domain);
DirContext ictx = new InitialDirContext(env);
Attributes attrs1 = ictx.getAttributes(host, new String[] {"A"});
2) This example above works when I specify the domain in the provider url.
If I am not specifing a domain but only the dns server I got an NameNotFoundException.
What should I do if I don't got the domain?
get the availible domains and loop on them?Hi,
if your DNS server supports that, you can do a reverse DNS lookup. This works as follows:
String server = "your.dns.server";
String domain = "in-addr.arpa";
String ip = "4.3.2.1";
Hashtable env = new Hashtable();
env.put(Context.INITIAL_CONTEXT_FACTORY, "com.sun.jndi.dns.DnsContextFactory");
env.put(Context.PROVIDER_URL, "dns://" + server + "/" + domain);
DirContext ictx = new InitialDirContext(env);
Attributes attrs1 = ictx.getAttributes(ip, new String[] {"PTR"});1: Use the pseudo-domain in-addr.arpa
2: Use the reverse IP address for lookup, i.e. if your host has 1.2.3.4, use 4.3.2.1!!
3: Request the PTR attribute
see also [http://en.wikipedia.org/wiki/Reverse_DNS_lookup|http://en.wikipedia.org/wiki/Reverse_DNS_lookup]
Martin -
can not transfer date from one hard drive to another, I keep getting an error because I have two of the same file names and one file name is in caps and I cant change the file name. My original external has an error and needs to be reformatted but I dont want to lose this informations its my entire Itunes library.
Sounds like the source drive is formatted as case sensitive and the destination drive is not. The preferred format for OS X is case insensitive unless there is a compelling reason to go case sensitive.
Why can't you change the filename? Is it because the source drive is having problems? If so is this happening with only one or two or a few files? If so the best thing would be to copy those over individually and then rename them on the destination drive.
If it is more then you can do manually and you can't change the name on the source you will have to reformat the destination as case sensitive.
Btw this group is for discussion of the Support Communities itself, you;d do better posting to Lion group. I'll see if a host will move it. -
OracleVM Manager template 2.2.0 trying change the host name
Hi,
I have installed the OracleVM Manager 2.2.0 template
into an OraclVM Server 2.2.1.
Reading the OracleVM Manager 2.2.0 install
instructions "Readme_for_Media_Pack_B59146-01.txt" and doing
the installation in the interview area, I am asked
to provide the fully qualified domain name as the
name of the OracleVM Manager.
Therefore, I provided something like this.
ovmmanager.mydomain.mytopdomain
Later, when I was in the OracleMV Manager,
I noticed the following.
Correct information was written in my /etc/hosts file.
192.168.1.160 ovmmanager.mydomain.mytopdomain ovmmanager
The case seems however, that unusual information
was written to the /etc/sysconfig/network file.
HOSTNAME=ovmmanager.mydomain.mytopdomain
When I type "uname -a", the results are shown.
ovmmanager.mydomain.mytopdomain
I say, "unusual", because most people prefer a single
name "ovmmanger" to be the host name.
I have tried to permanently change the host name of the computer by
changing the contents of the /etc/sysconfig/network file to the following.
HOSTNAME=ovmmanager
Next, at the command line I would type the following.
hostname ovmmanger
When I type "uname -a", the results are shown.
ovmmanager
However, every time I do an 'xm shutdown' to the
OracleVM Manger (the ovmmanger), and then later do an
'xm create vm.cfg' to start the ovmmanger,
when I type a "uname -a", the results are shown.
ovmmanager.mydomain.mytopdomain
When I look at the contents of the /etc/sysconfig/network file
the contents are back to the original contents.
HOSTNAME=ovmmanager.mydomain.mytopdomain
instead of my preferred contents
HOSTNAME=ovmmanager
My first question is the following.
By design, does the OracleVM Manager 2.2.0 template
supposed to have a host name to be a
fully qualified domain name?
ovmmanger.mydomain.mytopdomain.
My second question is the following.
If the situation is satisfactory to have just
ovmmanger
as my host name, then how do I prevent the host name renaming
process to reoccur every time I do an 'xm create vm.cfg' to start
the OracleMV Manager?
Thank you
AIMFirst Question: No, it does not have to be a full qualified hostname. As long as the hostname is resolved in your network short qualified is fine.
Second Question: You don't have to do anything. In OVM Template design the configuration tool is just called the first time your template is started. All succeeding startups will not go through the configuration again. (There is however an option to reenable/reset the VM that the configuration is called again).
Regards
Sebastian -
Cannot change the host name in registry.xml
After installing WebLogic 10.3.3 on Oracle VM template, the regsitry.xml and registry.dat files cannot be changed to reflect the hostname of the VM Guest
nstall WebLogic server in a OVM template. The host tag in registry.xml will contain the hostname from the template (e.g. firsttemp.oradev.inddev.national.com.in) .
Create a guest using this OVM Template and the The host tag in registry.xml will still contain the hostname from the template (e.g. firsttemp.oradev.inddev.national.com.in) rather than the actual hsotname.
I dont want to change it manually in the register.xml since it may cause problems in future
any pointers are highly appreciated..It is not recommended to change the name for an IP addressIt is not recommended by who? AFAIK there is no such sentence in documentation.
But there is other:
host Required. Specify the host name or IP address of the database server computer.
Instad of "It is not recommended..." better use "Consider this..."
, as if ever it changes in the future, you'll have to be back and change once again your ip.The same is truth when we are speaking about FQDN (fully qualified domain name).
How often your company changes the IP adresses on server platform?
My experience from past:
First case:
My company has rebranded and and domain name has been changed but IP has not. Unfortunatelly we were not using OID for resolving. If there were FQDN used then would have to make changes in many files. Fortunatelly we were using IP addresses.
Now we are using OID for resolving of tnsnames (as primary method).
What I want to say is both solutions (FQDN or IP) are fine. Each of them has some advantages and also disadvantages. -
Change the host name in Listener.ora to fixed IP address
in Listener.ora i want change host name to IP :
==== OLD ====
LISTENER =
(ADDRESS_LIST =
(ADDRESS=(PROTOCOL= TCP)(Host=Server)(Port= 1521))
(ADDRESS=(PROTOCOL= IPC)(KEY = ORCL))
=== WHAT I NEED ===
LISTENER =
(ADDRESS_LIST =
(ADDRESS=(PROTOCOL= TCP)(Host=100.100.110.1)(Port= 1521))
(ADDRESS=(PROTOCOL= IPC)(KEY = ORCL))
how can i do this .It is not recommended to change the name for an IP addressIt is not recommended by who? AFAIK there is no such sentence in documentation.
But there is other:
host Required. Specify the host name or IP address of the database server computer.
Instad of "It is not recommended..." better use "Consider this..."
, as if ever it changes in the future, you'll have to be back and change once again your ip.The same is truth when we are speaking about FQDN (fully qualified domain name).
How often your company changes the IP adresses on server platform?
My experience from past:
First case:
My company has rebranded and and domain name has been changed but IP has not. Unfortunatelly we were not using OID for resolving. If there were FQDN used then would have to make changes in many files. Fortunatelly we were using IP addresses.
Now we are using OID for resolving of tnsnames (as primary method).
What I want to say is both solutions (FQDN or IP) are fine. Each of them has some advantages and also disadvantages. -
hi
I bought a macbook -already used- but when I reached a User Acount to master my name and short name I can change only my first name but my short name is unchangeable ... i click to the locker and it's the same probleme i cant change the short name ...
and this shortName is for the name of my home icon ... and the name of all the installation path
How I can bit my own parameters?You can use this information to help. Mac OS X: How to change user short name or home directory name
Or you can use this software to do it. ChangeShortName 1.3 -
The Bonjour name does not match the host name
I changed the host name of a Mac Mini Server (OS X 10.8.5, Server 2.2.2) but then I got the email "The Bonjour name xxx-server does not match the host name yyy-server.local).
How do I fix it? (Appreciate for detailed steps.)The Bonjour name is separate from the DNS host name, and you're hopefully not serving the .local domain from your own DNS server within OS X Server. That can cause problems.
The Bonjour name is assigned by > System Preferences > Sharing.
If you want to see the three names assigned, launch Terminal.app from Applications > Utilities and enter the following three commands (some example output shown for each command) (do not enter the $ signs shown in the following; that's the command prompt):
$ scutil --get ComputerName
myhost
$ scutil --get HostName
myhost.example.com
$ scutil --get LocalHostName
myhost
$
Post the output from the three, and we'll have a look. If you want or need to obfuscate, please do so consistently. Example.com (as shown above) is a good choice for an obfuscated domain, too. -
How can I get the host name from Email address?
hi
When I using socket to develope an email-sending servlet,I don't know how to get the host name from emial address.can you help me,thanksStripping off the user name will give you the domain of from field in the message. This is not the same as the host. Take a look at:
http://www.stopspam.org/email/headers/headers.html
Theres a pretty good discussion about email headers and how to use the information. You probably want to check the information here against the RFC.
Sean -
Changing the Host Name in Lite Database
Hi,
I am using oracle 10g Database release 2 and oracle 10g Lite Database Release 3
OS is Windows 2003 Server
I changed the host name
“Old Name Oracle10g New Name OracleTENR1”
Also change the host name in Listener.ora and tnsname.ora after that i restart the machine
I checked the Database status (it is in OPEN STATE only )
And then I start the mobile server it's not working ….
How to change the host name in the oracle 10g Lite Database ?
Please Advice
Thank U
SHANhi,
Thanks Fot the Reply ......
I have changed the hostname in webtogo.ora
Mobile Server is Working...
But the Problem is "with the Browser http://localhost/webtogo it shows this error message in the Screen"
500 Internal Server Error
java.lang.NullPointerException at oracle.lite.web.util.TaggedHtml.parse(Unknown Source) at oracle.lite.web.util.TaggedHtml.init(Unknown Source) at oracle.lite.web.WebtogoLogonPage.init(Unknown Source) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpApplication.loadServlet(HttpApplication.java:2231) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpApplication.findServlet(HttpApplication.java:4617) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpApplication.findServlet(HttpApplication.java:4541) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpApplication.getRequestDispatcher(HttpApplication.java:2821) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:740) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:451) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:218) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpRequestHandler.run(HttpRequestHandler.java:119) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpRequestHandler.run(HttpRequestHandler.java:112) at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303) at java.lang.Thread.run(Thread.java:595)
Please Advice.....
thank U
SHAN
Maybe you are looking for
-
How do I install iOS 7 on more than one iPad without doing multiple downloads?
I have limited downloads from my isp - out in the country and very expensive. Is it possible to download iOS updates for 1 ipad (4) and then install the update on additional ipads without having to download the update again? If this can be done, plea
-
Recovery Partition Missing and Bluetooth Issues After Update
After upgrading to 10.9.3 my recovery partition is gone and my bluetooth will pair with a new device, connect, and then disconnect. After that I am not able to reconnect the new bluetooth device. I can see it, but can't connect to it. I have tried
-
Hello, My apologies ... I fear this is a very newbie question and I'm just missing something basic. I have created some .lvm files without headers. The contents are similar to the following: 0.000000 -107.735124 1201.923077 29750000.000000 1.
-
Nano always need to be restetted!
Just got a brand new 4 gigs nano under the tree! After nano goes to sleep for some times, although I can seee it play a song, nothing comes out of the earphones! Controls work just fine, I can switch from song to song, see the scrolling bar of the re
-
Have trouble logging on using my apple ID and password. Once I long on using my apple ID and password it says it can't verify since this Apple ID is already used. Well duh! What's missing here?