Cant retrieve mail

I recently updated to leopard & now cant get my mail from my comcast account. I tried a few things posted on the boards but no dice. Any help would be appreciated.
MB

You may have some password confusion going on here.
You will have a password and username for your broadband connection. You would have entered this in the netgear router at some time to connect onto tiscali.
The netgear router is the bit that contacts tiscali and makes the broadband connection with tiscali, not the mac.
Your mac makes a connection with the netgear router with whatever password you might have given the router the router then allows the mac to route through to tiscali. This is where the 'purple ball with a yellow lightening pattern in the middle' come in - Internet Connect - it is one of the ways for establishing a connection with the outside world - in this case the netgear router. As long as you are able to access web pages with safari or whatever then you are logged onto your router and that is logged onto tiscali and its email server. (As long as the internet is working you could quit Internet Connect and ignore it)
You may have a separate password and username for your email account at tiscali - this you should have entered in the mail preferences for you account details. Although tiscali allow you to have the same password and username for both the broadband connection and the email account.
Anyway you originally said that you can send emails but not receive them.
1. You are connected to tiscali broadband otherwise you would not be able to send emails.
2. The problem lies with the settings on the mail setup. If you are able to receive emails on you pc then have a look at the settings on Outlook Express?? and see if they are the same as the settings on mac mail.
3 Consider whether you are entering the correct password/username. You could check by going to the tiscali web page and logging into your email on the web.

Similar Messages

  • I recently upgraded my IMac to Lion and have found that my mail account does not include a "mail trash" category similar to "mail sent", making it difficult to retrieve mails I might have sent to trash but find I need some information from.  Suggestions?

    I recently upgraded my IMac to Lion and have found that my mail account does not include a "mail trash" category similar to "mail sent", making it difficult to retrieve mails I might have sent to trash but find I need some information from.   I've searched in settings and preferences and cant seem to find a way to add "Trash" to my Mail categories/folders.
    Suggestions?

    I recently upgraded my IMac to Lion and have found that my mail account does not include a "mail trash" category similar to "mail sent", making it difficult to retrieve mails I might have sent to trash but find I need some information from.   I've searched in settings and preferences and cant seem to find a way to add "Trash" to my Mail categories/folders.
    Suggestions?

  • Mail stuck - Cant download mail for one use

    My mail server running 10.4.8 was running fine, until yesterday I cant download mail for one user. I know there's mail in the account verified by the usage in Server Admin.
    Using Mail a second account I have still works fine, but one of them wont retreive my mail. For that one account Mail has a spinning wheel for half a minute at least whereas the working account stays on for half a second. Both accounts are POP only.
    I've tried Reconstruct on that account via Server Admin. I've also installed mailbrf and ran -m on that account and -f on the database. I've also restarted my machine. No change.
    I've turned on POP logging to debug, and the log is identical for the working and non-working account.
    Any suggestions?

    MY GAWD! I just got all my mail! lol. Here's what changed....
    Nothing at all was changed with the server.
    However I recently got a new wireless router and swapped them, and after that all my mail came through. I dont understand this.
    Before cloning the router to get it to work, I plugged my new wireless router to my ISP and I was assigned a new IP, so that was one change. Another change is the brand of the router and possibly the settings, however I think I set it up identically (ie. same WAN/LAN IP, same ports forwarded, server still has the same static IP.
    Both mydomain.com and mail.mydomain.com point to my server via my router, and even though I check my mail from within the LAN side, I connect to mail.mydomain.com so it connects outside my network. And nothing changed with my domain settings other than me changing the IP address for both my domain and subdomain.
    So in summary the changes are:
    1. New wireless router (but same configuration for the most part)
    2. New IP address
    I still dont understand why I was unable to retrieve my mail before. I'm going to leave his question as 'unresolved' to see if I can understand what happened so I know for the future.
    Thanks for all your earlier suggestions and I look forward to figuring out what the problem was.

  • HT5622 i have reset my iphone and have forgotten my apple id and cant retrieve it either. is there any way to start my phone again? Please help!

    i have reset my iphone but cant retrieve the id from which i logged in to icloud, is there a way to start my phone without it, ive been trying for a very long time. please help!

    Ok, when you said "found" I took that literally.  Still, the activation lock cannot be bypassed, Apple cannot do anything to assist with that.  You need to go through all of her papers and see if she wrote down the Apple ID and password as there is no other way to make the iPhone usable.

  • Third party app. The vault anyone loose all their information and cant retrieve it? Need help lost all my info.

    Third party app The vault anyone loose all their information and cant retrieve it? Need help lost all my info.

    Contact the developer of the app.
    Restore from your backup.

  • How to retrieve mails from a Mail Server ? PLEASE REPLY IF YOU KNOW !

    Hello,
    I am trying to retrieve mail from a mail server using the example from JGuru. The command line is as follows:
    java GetMessageExample mail.wlfdle1.on.home.com (Mail Server Name) <username> <password>
    I should be prompted to read the messages in your INBOX. Enter YES to see the message content.
    0: [email protected] Thanks.
    Do you want to read message? [YES to read/QUIT to end]
    YES
    Blah Blah Blah
    1: [email protected] No Thanks.
    Do you want to read message? [YES to read/QUIT to end]
    YES
    Blah Blah Blah Blah
    I do not get any error or any output.
    Any Clue or any idea how I can get some result ??
    Response will be appreciated.
    Thanks.

    This is the sample program from jguru. After executing the following command (replacing the mail server, username, and password):
    java GetMessageExample POP.Server username password
    You'll be prompted to read the messages in your INBOX. Enter YES to see the message content.
    0: [email protected] Thanks.
    Do you want to read message? [YES to read/QUIT to end]
    YES
    Blah Blah Blah
    1: [email protected] No Thanks.
    Do you want to read message? [YES to read/QUIT to end]
    YES
    Blah Blah Blah Blah
    import java.io.*;
    import java.util.Properties;
    import javax.mail.*;
    import javax.mail.internet.*;
    public class GetMessageExample {
    public static void main (String args[]) throws Exception {
    String host = args[0];
    String username = args[1];
    String password = args[2];
    // Create empty properties
    Properties props = new Properties();
    // Get session
    Session session = Session.getDefaultInstance(props, null);
    // Get the store
    Store store = session.getStore("pop3");
    // Connect to store
    store.connect(host, username, password);
    // Get folder
    Folder folder = store.getFolder("Inbox");
    // Open read-only
    folder.open(Folder.READ_ONLY);
    BufferedReader reader = new BufferedReader (
    new InputStreamReader(System.in));
    // Get directory
    Message message[] = folder.getMessages();
    System.out.println(folder.getMessages());
    for (int i=0, n=message.length; i<n; i++) {
    // Display from field and subject
    System.out.println(i + ": " + message.getFrom()[0]
    + "\t" + message[i].getSubject());
    System.out.println("Do you want to read message? [YES to read/QUIT to end]");
    String line = reader.readLine();
    if ("YES".equals(line)) {
    // Display message content
    System.out.println(message[i].getContent());
    } else if ("QUIT".equals(line)) {
    break;
    // Close connection
    folder.close(false);
    store.close();
    Please help me on this.
    thanks.

  • When i use photostream on my computer, i can get only 5 pictures, i cant retrieve the rest

    I have a few pictures in my phone but when i use the photostream from my computer, it shows me only 5 pictures, i cant retrieve the rest.
    Any help..

    Hi designersn.
    First off, Try a '''Restart with Add-ons Disabled...''' (under '''Help''') if that doesn't alter anything then we can rule out addons as a cause.
    It may be a graphics card issue, so try unchecking '''Use hardware acceleration when available'''.

  • Can I use Time Machine to retrieve mail that was in Trash on my MacBook Air, after I emptied Trash?

    Can I use Time Machine to retrieve mail that was in Trash on my MacBook Air OS X Yosemite, after I Emptied that Trash?

    Interesting question. I don't think you can because Time Machine would have deleted the data in subsequent backups because it was removed from the computer. But you never know about these things until you actually try it, which I've never done. So, why don't you give it a try. Worst that can happen is it's not there and you're no worse off than now.
    If you need help with restoring mail from Time Machine: Please visit Pondini's Time Machine FAQ for help with all things Time Machine. Also open Mail and select Mail Help from Mail's help menu. Search for 'restore mail' and see if you don't find some instructions there, too.

  • POP email account spins forever, never retrieves mail - how to cure?

    I've made no changes to my OS Lion mail settings, but suddenly (yesterday) my main POP account just spins forever and never retrieves mail nor gives an error.  Also now sometimes I have to force quit the client because mail never completely quits the normal way.  I've installed all the OS updates, and my iphone and ipad can retrieve the mail from that account with the same settings just fine.
    Help?

    This has just started for me in exactly the same way after I updated my wifes comp to 10.7.5. The iphones and ipads all send and retrieve mail with the same settings with no problems at all.
    Did you finally solve this problem?

  • Retrieving mailing  lists by connecting to LDAP(windows AD)

    Hi All,
    I have crunch requirement, for retrieving mailing lists and the members in the list fromwindows ad(ldap) .The mailing group location and mailing group name are the serach parameters.
    Required help on the same.
    (a code sample is appreciated)
    Thanks in advance

    You just simply need to iterate through each of the members to retrieve their mail address.
    As the values stored in a group's member attribute are all distinguished names, it makes the task very simple as you just need to bind to them and request the value of their mail attribute.
    I also recomend that you behave like a good Active Directory citizen and use range retrieval which is described in the post "JNDI, Active Directory, Paging and Range Retrieval" available at
    http://forum.java.sun.com/thread.jspa?threadID=578347&tstart=0
    In order to achive what you want, you just need to add a few lines of code to the range retrieval example.
    Replacefor (NamingEnumeration e = attr.getAll();e.hasMore();totalResults++) {
         System.out.println("   " + totalResults + ". " + e.next());
    }withfor (NamingEnumeration e = attr.getAll();e.hasMore();totalResults++) {
         String userName = e.next().toString()
         System.out.println("   " + totalResults + ". " + userName);
         String retAtts[] = {"mail"};
         Attributes mailAtts = ctx.getAttributes(userName,retAtts);
         System.out.println("     " + mailAtts.get("mail").get());
    }Good luck.

  • Mail hanging and seldom retrieving mail, Mail hanging and seldom retrieving mail

    When I have Mail running (5.1) all that happens is the circular progress thingy is trying to retrieve Mail constantly when I opened up the the Inbox triangle it is the iCloud mail sync progress circle thats because Mail is set to sync. Is that OK and good for the system or is it best to be switched off?

    When I have Mail running (5.1) all that happens is the circular progress thingy is trying to retrieve Mail constantly when I opened up the the Inbox triangle it is the iCloud mail sync progress circle thats because Mail is set to sync. Is that OK and good for the system or is it best to be switched off?

  • Dear Fellows. Is there a problem with iPhones mail in general retrieved mail ?

    Is there a problem with iPhones mail in general retrieved mail ?

    My error message reads....  "Cannot get mail"...the mail server imap.gmail.com<http://imap.gmail.com> is not responding"
    John J. Divers https://discussions.apple.com/Roof Logo Small
    Chief Operating Officer and
    Chief Financial Officer
    ******<x-apple-msg-load://8778A9C9-0671-419A-B2DB-CD4A3315BA86/*****>
        https://discussions.apple.com/CDT Logo for Email Signature <http://www.cdt.biz/>
    tel:  212-271-5084<tel:212-271-5084>
    fax: 212-271-5079<tel:212-271-5079>
    *****<x-apple-data-detectors://1/2>
    New York, NY 10018-7702<x-apple-data-detectors://1/2>
    <Personal Information Edited By Host>

  • How can I 'reactivate' my 'Get Mail" button so I can retrieve mail manually. I does come in at various intervals. I  have a Mac OSX 10.5.8

    how can I 'reactivate' my 'Get Mail" button so I can retrieve mail manually. The emails do come in at various intervals. I  have a Mac OSX 10.5.8/\. The small envelope 'button does change colour when I click it, but I don't get that whirling gear.

    Thank you for the reply. At your suggestion, I did try 'get new mail' under Mailboxes, but still nothing, no whirling gear. As I wrote earlier, emails do come in at various intervals, but just not when I click the envelope icon.

  • I use my computer with my wife, when i downloaded itunes it was on my part of the computer, but one day had my ipod connected to my wifes part of the computer and from then on have always signed into her part, but now cant retrieve my films from my part

    i cant retrieve films from i tunes that i downloaded on my part of the computer i share with my wife, as i somehow selected to sync on her part, now i keep getting a message that says, the ipod paddys ipod cannot be synced .you dont have enough access privalages for this operation.

    I'd wager a six-pack of cold adult beverage that you are still "logged in" to her iTunes account....
    Make sure you are logged in to YOUR computer account, then lauch iTunes.  Go to the Apps Store.  Verify that you can log in to YOUR iTunes account.
    From that point you should be able to get your stuff.  If not you may have to reset to factory and then restore from a backup....

  • Not retrieving mail

    Hello,
    I was wondering if anyone knows why my iPhone is not retrieving email today. It has never had an issue before, but today it is not retrieving mail. It also would not get into the App Store yesterday. I have heard that there has been speed issues lately, but....
    David

    Nevermind I deleted some messages and it works all of the sudden.

Maybe you are looking for

  • Microphone jack not working with IOS 7

    Hi, I don't know where to report to, I've been using IOS on my iPhone 4 and iPad 3 since yesterday and looks pretty great but I noticed that the microphone jack is not working to speak with siri or even answering to a call, please let me know if you

  • VLAN assignment from ACS not applied

    WLC 4402 5.2.157.0 ACS Express 5.0.0.18 We have an issue where the VLAN assigned on the ACS isn't applied on the 4402 WLC. We have 'Allow AAA Override' checked on the WLAN, the QoS is overridden to bronze properly, but the VLAN stays at 0 and the int

  • Automation of XI inbound flows

    Hello everybody, I work for  a Job Scheduler editor and some of our customers using Xi would like to schedule Xi related jobs . To make the situation clear : Xi has an internal Job Scheduler, but it is very basic. This JS has no connection with CCMS

  • Delete snapshot subtree fails

    Windows 2008 R2 SP1 Datacenter with Hyper-V role installed.  OS on drive C.  Hyper-V configured to store everything on drive D. Created a snapshot of a VM prior to installing software update on VM. Update was successful. Shut down VM, then in Hyper-V

  • Authenticating LMS 4.x Users via TACACS+ on ACS 4.1

    Hello Support, I tried to authenticate the LMS 4.x Users via TACACS+ on ACS 4.1. But unfortunately is not working! On LMS 4.x i have created users and i have defined roles to the users. I have defined the Authentication Mode Setup for TACACS+ on LMS