Cant scan muliple paper to one JPEG file name on HP Digital Sender Flow 8500 fn1.

HP Digital Sender Flow 8500 fn1 is unable to provide one file name on selecting JPEG format when provided multiple paper for one Job. instaed it gives one file name per one paper .the same seetings works fine for PDF formate

Similar Messages

How do I scan multiple pages into one pdf file using the PIXMA MG7520 on Windows 8.0? Please help!

I recently received a PIXMA MG7520 for a gift. It works great with my lenovo laptop/tablet running on Windos 8.0. The one drawback to the HP all-in-one that it replaced is it does not have an ADF. That being said, there must be some way to scan multiple pages into one pdf file. I need help figuring thing out. Thanks in advance!
Solved!
Go to Solution.

Hi mdtolbert54,
There is a program that comes with the printer called the IJ Scan Utility that can assist you with scanning multiple pages into a single PDF document. To do this, please follow these steps:
1. On your keyboard, press the Windows key.
2. Start typing IJ SCAN UTILITY. The search window opens as you type. Once the IJ SCAN UTILITY is displayed, please select and open it.
3. In the Canon IJ Scan Utility window that opens, click SETTINGS.... in the bottom right of the window. The Settings dialog box appears.
4. Click the DOCUMENT SCAN option on the left pane of the window.
5. In the SAVE SETTINGS section of the window, you will select the save format and location of the document you are about to scan.
a.) In the FILE NAME field, specify the name you would like to give the file. By default the filename will begin with IMG; you can remove IMG and change it to whatever you would like to name the file.
b.) In the DATA FORMAT field, use the drop-down arrow to select the PDF (Multiple Pages) option.
c.) In the SAVE IN field, please navigate to the area where you would like the file to be saved once it is scanned in. By default, the file will be saved in the MY DOCUMENTS folder.
6. Once all settings have been selected, click the OK button at the bottom of the window to save the changes. The IJ Scan Utility main screen appears.
7. Click the DOCUMENT button. Scanning starts. Click the CANCEL button to cancel scanning if needed. Scanned items are saved in previously selected folder location specified in the SETTINGS... window.
If you find that you need advanced scanning options such as adjusting resolution, brightness, contrast, saturation, color balance, etc. in addition to the options selected above, please click on the SCANGEAR button on the IJ Scan Utility Main screen, then adjust the items as necessary.
Once the items above are set for document scanning, in the future, you will only need to launch the IJ Scan Utility, then press the DOCUMENT button to perform the scan (unless you want to make changes to the settings).
Hope this helps!
This didn't answer your question or issue? Please call or email us using one of the methods on the Contact Us page for further assistance.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

How do i scan multiple pages into one pdf file

How do I scan multiple pages into one pdf file?

That depends on your scanning software. Adobe Reader doesn't scan.

How to scan more pages into one PDF file using hP inkjet 2515

Dear friend
How to scan more pages into one PDF file using hP inkjet 2515

Dear friend
How to scan more pages into one PDF file using hP inkjet 2515

When importing photos with iBooks Gallery widget, is anyone aware of a technique for simultaneously importing the photo's description (or jpeg file name) and writing it into the iBook Author caption field for the imported photo?

When importing photos with the iBooks Author Gallery widget, is anyone aware of a technique for simultaneously importing the photo's description (or jpeg file name) and writing it into the iBook Author caption field for the corresponding imported photo? I have 4,800 stills to import and can't imagine it's necessary to copy and paste the description for each.

As always, feel free to use the 'Provide iBooks Author Feedback' menu item for features you'd like added in the future, etc.
http://www.apple.com/feedback/ibooks-author.html
As for AS, I'm not sure anyone has sniffed iBA's dictionary yet...google is you friend for hot prospects, I'm sure

Scanning multiple pages to one PDF file on HP PHotosmart 6525 printer

I tried the solution but there was no box near preview so I could change DPI to 300. Tried to scan 2 documents, no save button either. Help?

Hi nancynurse,
Welcome to the HP Support Forums! I see you are interested in scanning multiple pages to one single PDF file and be able to change the dpi settings. To better assist you can you please leave me with the following information:
1. What is the current Operating system you are running, Windows or Mac and which version?
2. Which solution was it that you tried with no success?
3. How are you scanning, with or without the HP Software?
I hope to hear from you soon so we can begin troubleshooting!
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Scanning multiple pages as one pdf file

Hi Im using a Macbook Pro 10.9.5 and am trying to scan multiple pages and save as one pdf file. One suggestion is to use image capture. However, when I try to do this it says no camera or scanner is detected but it does not give me an option to copy multiple pages. Any suggestions. I have tried lowering the resolution but still have no luck.

Hi SusieG1026,
Are you sure to select file type Correct as text in image capture window?

CS6 Links Window Shows jpeg file name but not tiff or psd file name

So I have a question, I noticed that in CS5 and CS6 that when i place a jpeg file in Illustrator, the file name does appear in the links window, but when i place a tiff or a psd file there is no file name in the links window, this drives me nuts. Is there a way to see the files name of placed psd and tiffs in the links window?

Here's my thoughts...
1. You are a bit confused and I wonder how you can determine a file is a PSD or a TIF by looking at it? Not all print drivers can recognize PSD's, but can recognize TIF ( this means almost all output devices can interpret TIF's no problem ). That said, PSD's can manage layers better than TIF's which add to file size each layer you include in the TIF.
2. Never say never. This all depends on the file's use. Layered TIFs can add complexity in which a print driver can or cannot deal with. As you work on an image, you may want to merge layers for whatever reason(s) and you always have the option to flatten whenever you feel like it. However, It is also a good idea to dupe the file as you move along. That means you always have a layered version to fall back on should you need to edit later on. I also Place transparent PSDs in Illustrator files with no problems. But, I save as EPS in Illustrator and when I do that, then the file is automatically flattened. This is perhaps what the internet was talking about.
3. Yes, see number 2 above. There's no such thing as automatic flattening of TIFFs. Again, this all depends on the printer and whether or not it can print while retaining original layers. Some do, some don't. Most of the time, I edit in PSD with layers intact. Then, when I prep the file for printing, I will save a copy as a flattened TIFF so the file streamlines through the RIP and Print process.
4. Makes no difference. Use 'em if you've got 'em.
Try to get some good resource material at a library or college bookstore or barnes & noble. Also, get Adobe's Print Publishing Guide. This is a good reference guide.
Message was edited by: John Danek

Is it possible to change each exported JPEG file name from "Export JPEG Slideshow"?

It is convenient to add each image name as a text on each figure by Slideshow.
Could I use each image name as the exported file name?
thx a lot!

Blendy,
You can follow the steps below to assign custom names to export files:
File Naming
Choose an option from the Rename To pop-up menu.
If you chose an option that uses custom text, enter the custom name in the Custom Text box.
If you use a numeric sequence and you don’t want it to start with “1,” enter a different value in the Start Number text box.
For more options, choose Rename To > Edit.
Source: http://helpx.adobe.com/lightroom/help/export-files-disk-or-cd.html
Also you can follow the video from the link below:
http://tv.adobe.com/watch/the-complete-picture-with-julieanne-kost/how-and-when-to-rename- files-in-lightroom-4/
Let me know if you need more help on this.
Cheers!
Mandhir

Rename file name & format using ftp sender

Hi all,
This is regarding the renaming of file at sender file(FTP) communication channel and placeing the same file in the same folder.
At FTP server at sender side (i.e.clients place) is in .txt format.But now .txt file has to rename and change into .sav foramt with below required name convention of file.
client format is : SAP_Order.txt (Pervious file name).
We need to change the file in to "SAP_Order_yyyymmddThhmmss.sav" format..
How can i achieve this requirement?
Can please suggests me solutions ASAP.
Best Regards,
satya,

Hi,
if your requirement is to pick the existing file in the FTP folder...and send as idoc to the target and place the renamed file to FTP folder...
then its simple...
use two receivers instead of one , one for point to target and other for sender itself... (second receiver is for changing the file name format....)
Hope the above understanding is correct...if not provide more details of your requirement...
HTH
Rajesh

Why cant i open more than one psd file in photoshop?

when i try to open another psd while one is open i get "Another Adobe Photoshop CS6 is running Close Adobe Photoshop CS6 before running Adobe Photoshop CS6 Portable

HUH? I don't even know what Photoshop Portable is...
I have CS6 (Cloud ver) and no trouble opening multiple PSDs.
Which operating system are you using?
Which ver of Photoshop? You'll find it under Help > About Photoshop.
Can you describe your workflow?
Nancy O.

Scanning multiple pages to one document HP Deskjet 1050A J410 series

I want to scan three pages to one PDF file and save to my computer. The help already available on line says click the + button There is no + button on the HP Deskjet 1050A scan screen on the computer. Scanning single pages is easy. I have been to the advanced settings and made sure that the "Create a separate file for each scanned page" box is not checked.
Can anyone help?

Hi,
No, you can't see + sign when scan from printer, you have to scan from somputer software, on computer.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Need simple instructions to move .jpeg file to usb memory stick

Firstly, is a USB stick called a remote disk in Apple talk language?
In finder I see devices and remote disk. I try to move a .jpeg file to that (while assuming it is the USB stick that I stuck in the back panel of the iMAC) but nothing seems to happen. I can't see anything. There are no files there and if I click nearby in the left panel it keeps wanting to close or hide.
All I want to do is move one .jpeg file to a USB stick then bring that stick to a professional printer asap.
Hope that someone can help.

A Flashdrive (USB stick) or Memory Card icon looks like white square box on both the Desktop and in Finder Devices. In Finder you will also see an Eject button just to the left of the Flashdrives icon. Yours may not have a name like my example, because I name mine to make it easier to keep track of them.
To move images to the Flashdrive, you should be able to simply drag and drop then to either the Desktop or Finder icon.
To check and see if the images have copied to the Flashdrive simply highlight the Flashdrive on the sidebar.
Lastly always Eject External Drives and Flashdrives before disconnecting or unplugging them.
Additionally if you get an error or can not write to the device message, then the Flashdrive is probably formatted for Windows.
Hope this helps you out.

Misinterpreting JPEG file format when dynamically select mages

Hi everybody,
I notice one strange thing, how OBIEE 11g interprets JPEG file name formats. I've activated analyticsRes service and everything worked fine....until I've tried to select dynamically the image with the JPEG file name as *6590.jpg*. I set the new photo column on the BMM layer with the expression
*'/analyticsRes/shoes/' || CAST("ADDON_1"."DM_PLU"."MODEL_CODE" as varchar(30)) || '.jpg'*
As you see, the name of the JPEG file was set as varchar (30), BUT! Instead of retrieving the image from the file *6590.jpg* for the particular MODEL_CODE the system shows square shape with the red cross on the left upper corner. I've tried several work arounds, but until I changed the MODEL_CODE in the DWH to *06590* and made subsequent name change for the JPEG file in the '/analyticsRes/shoes/' directory nothing worked properly.
So, be aware, that the item name in the of the column which you refer to as a JPEG file name has varchar format (you could use '-', letters, etc.) in order to avoid system's misinterpreting of the JPEG file name.
I would appreciate your comments.
Regards
AL

Make sure that the string is showing as /analyticsRes/shoes/6590.jpg
and then Column properties->Data Format->Image URL
Let me know how it works

How to send a picture in pdf file when it is in jpeg file

how do I send an attachment in PDF file when it is now in jpeg file. I want to send this attachment in an email.

Hi,
Please convert your JPEG files to PDF file using "Convert to PDF" tool at https://createpdf.acrobat.com/signin.html or Adobe Reader X or Reader XI(using Tools >CreatePDF).
After converting the file please download it to your computer then attach it in your email.
Thank you.
Hisami

Cant scan muliple paper to one JPEG file name on HP Digital Sender Flow 8500 fn1.

Similar Messages

Maybe you are looking for