Cant see effects in Bridge CS5

As per the title here, I can't see effects in Bridge.
Can anyone help?

You don't preview effects, only animation presets and even then only the ones that are specially prepared. If those don't show up, reinstall Quicktime.
Mylenium

Similar Messages

Cant see effect editing pop up window

So I'm using Garageband and this new problem starts happening. When I try to manually edit the settings on an effect (like reverb) there is normally a pop up window. Well, now there isn't as you can see from this screen capture the pop up window called reverb should be in the forefront:
http://angryjim.com/storage/missingpopup.jpg
But it's not. The only time I had a similar problem was when the window was opening so far off the edge of the screen that I didn't see it. I don't think that's the case here. I tried restarting garageband, restarting the computer, even repairing permissions (who knows). I tried resizing the pixels of my screen. no luck.
any ideas??

That's really weird. Try the standard remedy for "oddball problems":
http://www.bulletsandbones.com/GB/FAQPages/OddBallProbs.html

Bridge CS5.1 – Disappearing File Names (Now You Don't See It All)

Bridge CS5.1. Lion 10.7.2. 27" iMac native display at native resolution.
For some reason, in Lion (but not Snow Leopard) Bridge cuts-off the bottom line of long file names (see the screenshot). Irritating. Difficult if I'm trying to distinguish between ‘Long File Name (1)’ and ‘Long File Name (2)’ where the (1) and the (2) have partly disappeared off the bottom, hidden under the bottom scroll-bar.
It seems to be something to do with the window resizing as Bridge, whilst not adapting the size of the thumbnails to fit the window size, produces a scroll-bar instead (see bottom right hand corner of screenshot). This doesn't happen in Snow Leopard.
I've tried fiddling with all the parameters which could effect Bridge's window display, but to no avail.
You can add this to the the other display problem with Adobe Camera Raw (see previous postings). Nice if Adobe could fix this too.
Sorry, this screenshot is hopelessly and incomprehensibly small owing to Adobe’s image size upload restrictions – so you’ll have to trust me on the disappearing file names and the scroll-bar.

Well, gentleman (gentleman, I assume) your answers are of no real help to me unless you have Lion to test this on. There is no relevant comparison to make since I have already established that this works correctly in Snow Leopard.
Yes, it is a man, I leave the qualification Gentle to you
I was more curious to the solutions you have done and when something does work on snow leopard and not in Lion will not automatically need to be qualified as a bug unless you tried different solutions.
Have you tried to delete the 'lastusedworkspace' file from the user library, resetting preferences and even deleted the plist file from the user library prefs? And did you try the default film strip mode. Or other default workspaces, is it only your own customized workspace that shows this behavior? What have you set as additional info lines in the Bridge prefs.
If it seems a bug you should report it as such at Adobe, this is still a user to user forum. But with Lion still in development and wide spread known as a bit buggy it might also be wise to throw the same bug report at Apple.

CS5.5 Can't see Pantone Color Bridge libraries!

Hello there!
I am using Creative Suite CS5.5 Trial version for now on Windows 7 platform. For some reason I don't see Pantone Color Bridge libraries, only the old ones, but none of the Plus Series. I was able to see these colors on version 5, but not here. Can't see them on Photoshop, Illustrator or InDesign. I wonder if CS5.5 supports these colors. I even downloaded a plugin from Pantone and Pantone Color Manager, but with no luck. I contacted Pantone, but still waiting for a response. Any help would be much appreciated, thanks!
Aldo

Please post in the InDesign forum. This forum is for suite specific issues only.
Bob

How can I see the previews of my D610 in bridge cs5 and how can I open them in my CC photoshop?

How can I see the previews of my D610 in bridge cs5 and how can I open them in my CC photoshop?

Nah. Raw support is version specific and that extends to Bridge as well. Older versions simply won't handle new cameras. If this is important to you, you will have to use Bridge CC.
Mylenium

Hello- I am a Canon photographer. I use Bridge (CS5) to process my raw files to jpegs. I am taking on a second photographer who shoots Nikon (D800) and i am not currenty able to see or process his images. Can you please help? thankyou!

Hello- I am a Canon photographer. I use Bridge (CS5) to process my raw files to jpegs. I am taking on a second photographer who shoots Nikon (D800) and i am not currently able to see or process his images. Can you please help? thank you!

According to Adobe:
D800
NEF
6.7, 7.1
4.1
D800E
NEF
6.7, 7.1
4.1
The fact that they have 2 versions of ACR means that initial support for the D800 was added in 6.7 but that complete support was finalized in 7.1 (the 4.1 in the chart is for Lightroom)
I'm not sure that this means there are missing features, but rather refinements and optimized settings were added in 7.1
However, ACR 7.1 requires CS6.
As Dag mentioned, you can also use the latest version of DNG Converter to convert the D800 files to DNGs which will be able to be opened in older versions of ACR.
The DNG converter only works on folders of files, not individual files. So just select the folder and convert. All the files in the folder will be converted.

Updater Adobe Bridge CS5 4.0.2 fails to install

Any ideas here...I keep getting a signal from Adobe Updater that my Adobe Bridge CS5 needs an update. Downloads CS5 4.0.2 ok...then the installation fails...no logging appears to occur of the problem. Has anyone dealt with this before, I cant seem to reach Adobe support.
iMac 24" 3.06GHz

Hi Donn,
You might also take a look at the following technical support document to see if it applies:
http://kb2.adobe.com/cps/850/cpsid_85031.html
Regards,
Julie

Bridge CS5 will not open on new computer

I deactivated ps cs5 on my old computer and used my ps cs5 upgrade disk to install it on my new win 7 ultimate computer. It should be clean install but I did migrate many files from the old win xp computer with windows easy transfer. Bridge will not open and I can not find it listed in my programs. I tried to run my old cs4 upgrade disk and it shows that I have bridge cs4 installed even though I never installed ps cs4 on this machine. Is it possible that some old migrated files are now blocking bridge cs5 from opening? I tried to reset preferences by holding the ctrl key and clicking on bridge but nothing will open. Would this be solved by upgrading to CS6 or will I still have the same issue if bridge cs5 does not open? I tried to run the bridge cs5 update but it will not install. I do not get any error message at any time. Adobe support advisor found an unnamed error but can not recommend a solution.

I ran the creative suite cleaner and removed all files from cs3, cs4. But they are still there listed in c>programfiles (x86)>adobe. I can see adobe bridge cs4 and adobe bridge cs5. when i run bridge.exe from adobe bridge cs5 folder it opens bridge cs5. but i cannot open bridge while ps cs5 is open. I can't seem to delete the cs4 files as it says i need administrator rights, which are somehow not available.
Update: Somehow it did work, even though the cs4 program files are still there. I opened mini bridge from within cs5 and it said something to the effect that it needed to close cs4 bridge and use cs5, i clicked okay and my files were displayed in mini bridge cs5. I closed that and then clicked the bridge icon from within ps cs5 and bridge cs5 opened. I guess I changed the preferences somehow. Thanks for your answer and suggestion, which may well have been the solution or it led me to the correct step. The big point is that I avoided the big reinstall I dreaded after two days of getting cs5 set up with all plug-ins,etc installed. Thanks for your help!

Bridge CS5 showing 16 bit previews

Hello
I have written about this before and have never had a good answer.
I see that the latest version of Bridge CS5 64 bit Windows seems to show 16 bit previews. The previews are posterised.
I have a ATI HD5400 with the latest drivers running on Win 7 64 bit. Win display properties shows 32 bit display at 1920 by 1200 on my Eizo SX2462W monitor.
If I open a previewed image in Camera Raw, I see a initially a posterised image which then redraws to un posterised.
Bridge slide shows also show posterised images and do not have the sharpening applied in CR.
I have purged all my caches and also have selected 100% previews and monitor sized previews.
The Loupe shows the posterisation.
Photoshop CS5 shows unposterised images.
Mike Engles

The Bridge previews are jpegs and I have a feeling that there is a problem with Bridge which is I think still 32 bit in CS5. working on a 64 bit OS.
Bridge CS6 (in fact Bridge version 5) is the first version that appeared in 64 bit. But I don't see the difference of 64 and 32 bit for the system effecting your previews.
The specs of your graphic card show that this card should not cause a problem.
To clarify, (no relevant knowledge of Windows on my side I'm afraid) you have multiple disks on your system or do you have a partition on the same disk for both XP and Windows 7?
And are you using two different libraries (read: two different cache folders for Bridge, one for XP and one for Windows 7) or do you use the same cache folder for both.
The latter might cause you problems. About each new version of Bridge has a different cache structure and they are not easy interchangeable (if at all). And I think both OS have different approach of cache but I'm not sure about that.
When stating that the problem solves with purge cache on one system and same solution brought it back on the other I think here is the culprit. To me this indicates to a cache problem.
Hence my suggestion of quitting Bridge and manual deleting the total cache folder (on a Mac this is in the user library) and after restarting Bridge it will refresh with a new and empty cache folder for a fresh start.

Bridge CS5 is Corrupting Raw and JPG Files Right Before My Eyes

I am using Bridge CS5 on a Mac to work on Raw files from a Canon camera. The files all looked good in the cameras review, and looked good when downloaded to the computer then the files started to corrupt and become unusable one at a time as I watched. They became all white or lines of color. Not all of them corrupted yhough (about 225 of 1100 did though). I eventually worked the uncorrupted files and even turned them into JPGs and sent them out. The next day I pull up the pics in bridge to see if they are still bad. All of a sudden files I opened and worked on yesterday started to corrupt one after another. Both the JPG and Raw files are corrupt and unusable even though they worked yesterday. It only happens when in Bridge. What is going on? This is riduculous.
Terry

Thanks for responding. What happens is I highlight a large group of files then click on open with Bridge or in Bridge I go to the subdirectory with the files. All the files are in a filmstrip on the left side of the screen. All of a sudden the file that I am viewing becomes corrupt (that is it turns into multiple horizontal lines of colors. Then I can watch as it happens to one file after another. I would compare it to when you quickly view film strips that were just uploaded and the initial thumbnail is blurry and then slowly all the thumbnails get clear as they process. But here they appear to already be fine thumbnails but then turn into the files with horizontal lines or sometimes just 30% or so so of the pic is visible and the rest is white or gray. When I try to open it the file cannot be opened because it is corrupt. It happens to both the RAW and the JPG file (I shoot in Raw+JPG). The first day it happened to about 200 of the 1200 files. So I was able to process the 1000 good ones in Raw convertor and create JPGs with no trouble. The next day I open all the files in Bridge again to see if the bad ones are good now and files I had already opened and were perfectly fine in RAW converter start to corrupt one after another like the ones did the day before. So I doubt it is the card or hardware it only happens in Bridge. Bridge must have the capability to do something to the files. It isnt making XMF files so thats not it, it is actually corrupting the RAW and JPG files. Have you ever heard of that. I found another forum with what sounded like the same issue to someone who had a Canon: http://forums.adobe.com/thread/645620
But this happened to Windows and I use MAC.....but I do use a 7D like them. I still wonder if Bridge just doesnt work well with Canon 7Ds or something like that. The above thread never found a solution. Maybe someone from Adobe has heard of this from others and discovered a reason or solution. Until then I cant trust Adobe products at all....which really sucks after how much it cost me, but whole shoots lost is worse, I guess.

Bridge CS5 Cache Location

What are the advantages and disadvantages of centralized vs. "exported to folders" cache locations in Bridge CS5?
I see in the help section it says something about sharing images across computers.
Other than that, what are the effective differences?
Thanks,
Drew

Have never seen a document laying out exactly how cache works, but this is my understanding.
Central cache is the main cache, and when you select purge this is the one that gets purged.
I use central cache as I believe that if you get a contaminated file you will have to manually delete the cache in all the folders, as purging only affects central cache. Using central cache may cost time, expecially on folders I rarely use, as the cache may have been deleted and replaced by cache from recently visited folders. But this depends on how many files you have and where you have the slider set for storage.
Some have reported that haveing distributed cache speeds up loading time for folders. Distributed cache is an additional cache put on the various folders. It is useful if you want to send photos to another drive as all the info is there (XMP files). Otherwise you have to choose build and export cache.
Hope this helps.

Corel Painter RIF Files In Adobe Bridge CS5.1?

Hello,
Does anyone know how I can view Corel Painter 12 RIF file thumbnails in Adobe Bridge CS5.1 For Windows? Right now Bridge just shows a blank icon. When I used Painter 11, the RIF file icons showed a thumbnail of its image in Bridge. When I upgraded to Painter 12 this went away. I can see the Painter RIF file thumbs in Windows Explorer, but not within any Adobe application.
Anyone?
Thanks,
Michael R.

Yep, same here. Running Adobe bridge CS5.1, upgraded to Mountain Lion yesterday. Navigated to folder that contained a zip file and Bridge crashed. I removed the zip file, launched Bridge again,and went to that same folder. Worked perfectly. On a hunch, I dragged a zip file back into that folder in Bridge, and *WHAP* down she goes again.
Looks like we wait for a fix. *sigh*
Unless...File type association somehow comes into it? Interesting, I just checked (it's under Preferences) and neither a zip file or a doc file is in the list.
Furthermore, there doesn't seem to be any way to add a new file type. Hm. Don't know if it has anything to do with the crashing, but man, what a pain this is!

Unable to open Camera Raw 6.7 from Bridge CS5

I am unable to view the RAW images that were taken on my D90 in Bridge CS5. They show up blank with the Camera Raw logo in the center and "NEF" in the upper left hand corner. This is the first time this problem has occured because I was (and still) able to view RAW images taken from my old D40. I have tried everything including updating my Camera Raw to version 6.7.0.339, but to no avail! I have no error messages, btw. I am operating Bridge and Photoshop CS5 on Windows 7 (32-bit). I found this thread, and it seems extremely helpful, but it's for Mac users: http://forums.adobe.com/message/2842306

All you need to do now is to refresh (purge) the cache. Everything is fine with your install.
That the right version of the ACR Plug-in is installed in the correct location is proven by the screen shot of the "About Camera Raw" splash screen. It would not show up in "About Plug-in" if it were not in the correct location.
I also take it only one instance of Camera Raw shows up in your list.
I see absolutely nothing in your first screen shot that would prevent you from sliding your mouse over to the "Purge Cache for This Folder" menu command and then letting go of the mouse. That's all it takes. That menu item does not appear to be grayed out. The only thing that is not clear is whether you do in fact have a folder selected.
The reason you see the generic NEF icons without preview is that the cache for that folder was built when you still had an older version of ACR that did not support your camera. That's why the cache needs to be purged (refreshed) now.
Humor me for a second and perform the following experiment: Select all the generic icons you see in the Content panel in Bridge and right-click on them in order to call the "Purge Cache for Selection" command you had discovered earlier and mentioned in a previous post. You should see the icons turn into thumbnails before your eyes.
Now you can just use the "Purge Cache for this Folder" command on any other folder containing generic NEF icons without having to select the individual icons at all.
If you already have a bunch of folders harboring generic NEF icons, go ahead and use the central Purge Cache command in Bridge preferences to purge the entire Bridge cache on your disk in one fell swoop.
Hope this helps. Let me know.
Message was edited by: station_two

How can I rename my pics in Bridge CS5?

How can I renams my pics in Bridge CS5?

Here's what is in the Bridge cs5 help pdf file. (I was not able to find this same help info from clicking help in Bridge cs5).
Batch rename files
You can rename files in a group, or batch. When you batch rename files, you can choose the same settings for all the selected files. For other batch-processing tasks, you can use scripts to run automated tasks.
1 Select the files that you want to rename.
2 Choose Tools > Batch Rename.
3 Set the following options:
Destination Folder
Place the renamed files in the same folder, move them to another folder, or place copies in another folder. If you choose to put the renamed files in a different folder, click Browse to select the folder.
New Filenames
Choose elements from the menus and enter text as appropriate to create new filenames. Click the Plus button [+] or Minus button [-] to add or delete elements.
•String Substitution
Allows you to change all or part of a filename to custom text. First, choose what you want to replace: Original Filename replaces the string from the original filename. Intermediate Filename replaces a string that is defined by preceding options in the New Filenames pop-up menus. Use Regular Expression allows you to use regular expressions to find strings based on patterns in filenames. Replace All replaces all substrings that match the pattern in the source string.
Options
Select Preserve Current Filename In XMP Metadata to retain the original filename in the metadata. For Compatibility, select the operating systems with which you want renamed files to be compatible. The current operating system is selected by default, and cannot be deselected.
Preview
One current and new filename appear in the Preview area at the bottom of the Batch Rename dialog box. To see how all selected files will be renamed, click the Preview button.
4 (Optional) Select a preset from the Presets menu to renaming with frequently used naming schemes. To save batch rename settings for reuse, click Save.

60D images not showing a thumbnail view in Bridge CS5..ideas?

I am having trouble seeing images in raw format from a 60D Canon in Bridge CS5. I have an iMac using OS X 10.9.4..any ideas why I can only see the white file, but can see all images in raw from 5D, 7D, 40D...etc. No updates show up as available on my computer or on the Adobe site. I just can't figure it out!
Thanks for your help.
-Alli

Make sure your ACR (Adobe camera Raw) plug-in is fully updated. That camera model has been supported since Adobe Camera Raw 6.2.
DO NOT rely on the Adobe auto updater to tell you that there are no updates available. It's totally unreliable in CS5 and earlier versions. The Adobe updater team overseas did not get their act together even halfway right until CS6.
Go into the About Plugin > Camera Raw… menu item in Photoshop to see what version of ACR you have. In CS5, ACR should be at version 6.7, more precisely at 6.7.1.
If you are already updated to ACR 6.2 or higher, then go to the Tools menu in Bridge and Purge Cache for the offending folder(s).

Cant see effects in Bridge CS5

Similar Messages

Maybe you are looking for