Cant see group calendars

So i have setup iCal server in an open directory environment. Its running ok, and i can manage and use individual user calendars, but the group calendars are not showing up in iCal on the client machine im using for testing. In this scenario i have a group called "Staff Members". and i have "wiki and blog" as well as "web calendar" checked in workgroup manager. with "group members only" set as read and write permissions.
If i access the web based calendar i do see the group calendar, and have all abilities i would expect.
The client machine is a bound member of the open directory. in iCal i added the account, and i am given a personal calendar which i can edit and use. but i do not see the group calendar. and if i go into "Delegation" it says i cannot access any accounts.

Hi and welcome to the Skype Community,
do you see the conversation listed in your Skype application at all?
Follow the latest Skype Community News
↓ Did my reply answer your question? Accept it as a solution to help others, Thanks. ↓

Similar Messages

  • I change my gmail password and now i cant see my calendar/notes/etc

    I change my gmail password and now i cant see my calendar/notes

    Hey ANIRAYS,
    Thanks for the question. You may need to update the account settings on your iPhone with the new password. Try navigating to Settings > Mail, Contacts, Calendars then tap on the account and update the password:
    Use multiple calendars - iPhone
    http://help.apple.com/iphone/7/#/iph3d1110d4
    Thanks,
    Matt M.

  • I cant see my reminders on the calendar list when I pull it up on iCloud... so I cant share...

    I try to follow the instructions to share a reminders list and I cant see my reminder list in my calendar on icloud. Everything is checked, I see the reminders on all my devices and on my icloud account, but they don't appear in the calendar on icloud. I tried it on my wife's macbook running Lion and hers doesn't show up either, so we must have something configured wrong... please help

    gg30340 wrote:
    licquorice wrote:
    With the default Android app you need to select which folders to sync in the account settings.
    Are you sure about that. I have just set up an IMAP account on the Android mail app and all the folders on the email account showed up without any selection being made by me and there is no settings that I can see to select which folders to sync.
    Absolutely, if you click on the account > settings >Sync send and receive > folder to sync, a list of folders is presented with tick boxes. This is on the default mail app on an HTC One.

  • Cant see the native groups on the forms and reports

    We are migrating 9.3.3 to 11.1.2.1. We recently found the issue after the migration. Even after migrating the users, groups and provisioning using LCM; we cant see the groups in the forms and reports.
    We did the migration for test environment, but didnt encounter this issue.
    For eg, when I click on 'assign access' for a planning form I dont see the group assigned to that form. I can see that group in the shared services with all the provisioning. I can find the group and assign it manually for that form. But it doesn't shows up after the migration.
    I opened the SR with oracle who suggested to bring over the schema and upgrade/register the applications again, as there might not be any groups present when I register the application before.
    We brought over the schema, migrate and register the applications, but the problem still persists.
    Has any one encountered issue like this, I would, I would really appreciate any suggestions.
    thanks

    Thanks for your reply John. I ran the UpdateUsers.cmd utility, but it didnt do anything. I brought over the schema again, updated and registered the application. Everything looks good so far, I can see the groups on dimension access and on the webforms.
    When I run create or refresh security it deletes all the records in HSP_ACCESS_CONTROL. The view link disappears from the planning dimensions and i cant see the groups assigned on the webforms as well.
    Any idea would be highly appreciated.
    thanks

  • Cant see users or group list in CMC

    Hi
    We use Business Objects XI release 2 on a Unix Solaris platform. I've noticed in both our DEV and Production installations (2 seperate installs) that when I log into the CMC Console, I cant see any of the users or group. I try to do a search of a user, for example, the administrator account but my search results show nothing even though I am logged in as the administrator.
    I have tried the same thing using 3 different browers (IE, Firefox & Chrome) on 4 other PC's/laptop but can not view any users or groups within the CMC console.
    Any ideas.
    Thanks in advance

    Hello Paul,
    which Service Pack you are using for Rel.2 ? Try to update to the latest one.
    If you have two fresh installations from Rel.2 try to re- create the CMS Datasource. Please note: If you do that the Database will be erased and re- created with the default values !!
    Regards
    -Seb.

  • HT1296 cannot sync the calendar on my ipad mini with my main imac computer. the settings on itunes say that my ipad is syncing over the air but it is not unfortunately. i cant see how to change the settings if need be. would appreciate help. thanks

    i canot sync the calendar on my ipad mini with my main imac computer. the settings on itunes say that my ipad is syncing over the air but it is not unfortunately. i cant see how to change the settings if need be. would appreciate help. thanks

    i have done this on my ipad mini and my imac but they are still not syncing. my iphone 4 has the icloud symbol but it seems to be unresponsive to touch, I cannot get it to highlight or turn-on. Bit confused.

  • Group calendar etc

    Hi people
    We have just et up a new SLS in a new office, with very few hiccups so far, windows computers connected, imac connected (duh).
    I have been reading the ical server admin PDF, but cant seem to find the best way to set up default calendars for each user.
    ie, we are a small sustainable architecture firm which has several fields (calendars) which are used by everyone. Do we need to have each user set up the calendar list for them selves or can I set them all at once?
    Still trying get a group calendar sorted too so everyone can see project start/finish dates etc.
    cheers
    Tim

    Hi Venkat...
    Find the below links this will helps you to solve the issue....
    Variable Offset
    http://help.sap.com/saphelp_nw04/helpdata/en/3f/89533e5ff4d064e10000000a114084/content.htm
    http://help.sap.com/saphelp_nw04/Helpdata/EN/f1/0a563fe09411d2acb90000e829fbfe/frameset.htm
    Regards
    Sudheer

  • How to create a group calendar?

    Hello,
    i am sorry but this is one more question on wiki-group-calendars.
    *In short:*
    I am not able to create a group calendar with the wiki frontend. the calendar that is created with a wiki is owned by the admin of the wiki. So it is always a personal calendar that cannot be shared in iCal.
    LONG:
    I want to create a group calendar that is viewed and edited through iCal.app and the web service. Apple´s "wiki deployment" guide says on page 57:
    +"The web calendar allows you to easily schedule events for yourself or your group. ...+
    +There are *two types of web calendars: personal and group*. You can send and receive event invitations through the personal calendar but not through the group calendar. Also, *while anyone in a group can create or edit events in a group calendar*, you can edit only events in your own personal calendar or event invitations you send to other people.+
    +The web calendar uses iCal Server to store events and invitations. ..."+
    But there is not mentioned how to create a group calendar. The calendar created with the wiki web-frontend belongs to the admin of that particular wiki. This is why the calendar data ist stored in folder named with the UUID of the wiki admin. Also the alias "http://server.fqdn:8008/principals/groups/mygroupname/" which i provided in iCal turns into ..._uids_UUID-of-the-wiki-admin and only the wiki-admin can access this calendar in iCal.app.
    My research on this topic reveals that there were in issue that should be resolved in 10.6.4 (that is running on our Server). So, again, how to create a group calendar?
    Thanks, Philipp.
    10.6.4 OSX Server
    10.6.x Clients

    farmer tan wrote:
    you need to go to the wiki page and add the wiki's there and then in the setting of the wiki is where you set permissions and services such as calendar, blog, and podcast you can also set all permissions for the wiki in the settings tab
    fyi none of my groups were available unless i logged into the wiki as the Directory Admin not Server Admin
    migrated from 10.5.7 to 10.6
    Message was edited by: farmer tan
    Could you be more specific farmer tan, please?
    You said "you need to go to the wiki page and add the wiki's there...." What is the "wiki page" you mention? Is that some place I go to via the browser or the Server Admin tool?
    I went to http://ical.mysite.com/ical/ and logged in as the Directory Administrator but didn't see anything resembling what you described.
    Thanks in advance for any help you can provide.

  • How do I create a group calendar in iCal Server 3?

    Hello everyone,
    I have set up a Mac Mini server to address the calendaring needs of my company.  I have also turned on the iCal service using the Server app in the Lion OS.  While the shared calendaring functions for individual users of iCal are great, my company is in need of general office calendar for postings of things like vacation times, company holidays, special conferences, etc.  Is there a way to configure the Mac Mini server to allow the setup of such a calendar?
    Maximus. Prime

    Okay, with everyone's help, I believe I have found a resolution to this issue.  I am very grateful to everyone who has contributed this discussion.  Your help has been invaluable.
    1.  The first thing I did was to ensure that the iCal and Wiki servers were both running.
    2.  Next, I created a user whose sole purpose was to create wikis on the server.  (In retrospect, I probably didn't have to do this, as any administrative account, which is what I have, can also make wikis).
    3.  I then created a wiki.  To do this open up your Web browser and enter in the name of your server followed by "/wiki" (no quotes).  An example of this is servername.local/wiki.  (If you are unsure as to whether or not DNS on your local network is working, you can enter the IP address of the server followed by /wiki).
    4.  Next login into the wiki by clicking on the lock icon in the toolbar.  (You can use the account you created earlier or any admin account on the iCal server for login).
    5.  Click the Wikis button.
    6.  Click the plus sign in the toolbar, then click New Wiki.
    7.  Enter a name and optional description.  It is much better to enter a short name with no spaces.  This will matter in a later step.
    8.  Next you will see the Set Wiki Access dialog box.  Here is where you can enter users of the wiki (calendar), and their permissions (i.e. Owner, Read-Write, etc.).
    9.  When done with the previous step, click create, and you should be taken to the "welcome" page of your wiki.
    10. Click the gear icon in the toolbar then select settings.
    11. Select Services in the sidebar, put a check into the Calendar box, and select Save.
    12. You should now see a link for Calendar underneath your toolbar.  Select it, then select Settings to adjust your timezone settings, etc.
    13. You can log out of the wiki at this point.
    14. Go to one of the users who was given access to the wiki in step 8.
    15. Open iCal -- Preferences then select the Accounts tab.
    **Now here is where things get "tricky."**
    16. It is likely that this user has a functioning account on your iCal server.  If you go to the Server Settings tab of the account and check the Server Path, you will see an entry similar to /principals/__uids__/longstringofalphanumericcaharacters/.
    17. Replace the long string of alphanumeric characters with "wiki-wikiname" (no quotes).  The wikiname is the name you entered in step 7.
    18. Close the iCal preferences box, and close iCal.
    19. The user may be prompted to re-enter his/her password.  Do so, and afterward you should be have access to the wiki-based group calendar.
    UH OH...what about the user's normal account?!?!?!
    20. Go back into the account preferences tab of iCal and re-add the user's normal iCal account with his/her normal credentials.  All of the user's calendar information should return because it is on the server and backed up regularly...right?
    This solution appears to be working for me so far.  I have verified that users who can only read from the wiki calendar do not have the ability to edit the calendar.  Of course, those who can edit the calendar are able to do.  These test users are also able to use their normal iCal accounts without any issues.

  • How to set up group calendar

    Hi - I have set up a server on my mac pro. I have everything configured between the server and the clients, and the calendars are able to invite / respond to calendar events from others. What I am wondering about, however, is how to create a common shared group calendar where everyone sees everything that everyone does on the group calendar. I.e. not just events 'shared' or invited to...
    Thanks,
    Gareth

    "currently there is no shared group calendar support."
    Well, not really. You hinted at it with: "set up a group wiki."
    Go into Workgroup Manager and set up an Open Directory group. Add people to it.
    Each client must then go into iCal --> Preferences --> Accounts and add an account. The name and password entered must be the same as that added to the group, Kerberos must be unchecked, and the account URL will be like (fill in the blanks properly):
    http://<your domain name here>:8008/principals/groups/<your group name here>/
    Now each properly logged in user of that group can make changes to the shared group calendar, without any "hacks" like making dummy users and delegation.
    However, I am getting a notifier: "Request Error: Accesss to <event name> in <your group name here> in account <your group name here> is not permitted." But that seems to be a lie, since multiple members of the group can make changes and others can see the changes.
    Oh yea, make sure you have a functioning DNS with valid reverse lookup.
    Message was edited by: Bytesmiths

  • How do I create a group calendar?

    Hi All,
    It is still unclear to me on a fresh 10.6 install how to create a group calendar (using only the Apple server administration utilities) such that all members of a given OpenLDAP group can also subscribe to and share the same calendar if they are members of that group.
    As best I can tell, there does not appear to be anything about this in the documentation. I thought this was something that was going to be supported via the server-admin tools in 10.6 without resorting to the command line.
    Maybe I'm just not seeing something obvious in the tools or documentation?

    farmer tan wrote:
    you need to go to the wiki page and add the wiki's there and then in the setting of the wiki is where you set permissions and services such as calendar, blog, and podcast you can also set all permissions for the wiki in the settings tab
    fyi none of my groups were available unless i logged into the wiki as the Directory Admin not Server Admin
    migrated from 10.5.7 to 10.6
    Message was edited by: farmer tan
    Could you be more specific farmer tan, please?
    You said "you need to go to the wiki page and add the wiki's there...." What is the "wiki page" you mention? Is that some place I go to via the browser or the Server Admin tool?
    I went to http://ical.mysite.com/ical/ and logged in as the Directory Administrator but didn't see anything resembling what you described.
    Thanks in advance for any help you can provide.

  • Group calendar on wiki doesn't work but individual calendars do.

    We have 10.6.3 server running as a OD master and I was looking to use the group calendaring feature of the wiki server. I go to the server using a web browser, sign in, and create a new wiki called "test". I then go into settings for the wiki and enable Calendar as one of the services. I save the settings and get a calendar link at the top of the page for the wiki. When I try to view the calendar I get the message in the middle of the page that says "Getting events from server ..." This never goes away.
    When I go to view the calendar for my user, it comes right up. It seems that I have things configured well enough for the web and iCal servers to talk to each other, but something is going wrong with the wiki portion.
    Since we are dealing with CalDav I started by using a web browser to diagnose the problem. I go to https://server1.jaxon.private:8443 and I can see that CalDav is working and I get the proper output. I try https://server1.jaxon.privat:8443/principals/users/username and I get all sorts of great info about the user. Finally I try https://server1.jaxon.private:8443/principals/wikis/test and I get an Internal Server Error. It makes sense that the webpage isn't working since the CalDav server isn't happy.
    The site access log has the following entries when I try to visit the calendar:
    10.0.1.20 - - [24/May/2010:14:44:48 -0600] "POST //server1.jaxon.private//server1.jaxon.private/RPC2 HTTP/1.0" 404 3754
    10.0.1.20 - - [24/May/2010:14:44:48 -0600] "POST //server1.jaxon.private//server1.jaxon.private/RPC2 HTTP/1.0" 404 3754
    10.0.1.108 - - [24/May/2010:14:44:47 -0600] "PROPFIND /principals/wikis/test/ HTTP/1.1" 500 201
    So there are a couple 404 not founds and a 500 Internal Sever error.
    I also get entries in the site error log:
    [Mon May 24 14:43:04 2010] [error] [client 10.0.1.108] File does not exist: /Library/WebServer/Documents/collaboration-availability, referer: https://server1.jaxon.private/groups/
    [Mon May 24 14:44:48 2010] [error] [client 10.0.1.20] File does not exist: /Library/WebServer/Documents/server1.jaxon.private
    [Mon May 24 14:44:48 2010] [error] [client 10.0.1.20] File does not exist: /Library/WebServer/Documents/server1.jaxon.private
    Some additional info about our configuration is below
    To start here is the output from changeip -checkhostname
    Primary address = 10.0.1.20
    Current HostName = server1.jaxon.private
    DNS HostName = server1.jaxon.private
    The names match. There is nothing to change.
    dirserv:success = "success"
    Under the iCal server section I have the Wiki Server listed as server1.jaxon.private with the SSL checkbox checked. Under Authentication I have type set to Any, Host Name as server1.jaxon.private, Port 8008, SSL set to Use, and SSL Port set to 8443.
    Under the Web server section I have 1 site enabled with a Host Name of server1.jaxon.private, IP Address of 10.0.1.20, and Port of 443. The Options, Realms, and Logging tabs all have the default values. Under security I have the SSL certificate configured. Under Aliases and Proxy are just the defaults, and Web Services has Wikis, Calendars, and change their password options.
    Any help would be appreciated.

    Apple has a command line equivalent to the Server Admin GUI application that conveniently enough is called serveradmin. If you open terminal on your machine and type:
    man serveradmin
    You'll get the manual page for the serveradmin command. This will run you through all the different arguments you can use with the command and has some examples of the command usage.
    If you type:
    sudo serveradmin settings calendar
    The sudo means super user do. This will temporarily escalate your privileges so you can run the command. It will then ask you for your password to verify your identity. When the command runs you will see all the different settings listed for the calendar service.
    To change the value of an item you would do something like the following:
    sudo serveradmin settings calendar:somesetting="new value"

  • IPsec over GRE not coming up, cant see why, debug inc...

    Hi all,
    Rattling my brains here, as far as i can see everything is fine, it should be working, but for some reason its not, and i cant see anything in the debug thats hinting to the reason why, can anyone help me out with this?
    im normally good at this stuff, but this time its got me!
    the hub config works with many 3 other spokes configured in the same way!
    Thanks for any help guys
    SPOKE
    crypto isakmp policy 10
    encr aes 256
    authentication pre-share
    group 5
    crypto isakmp key xxxxxxxxxxxxxxxxx address xxx.xxx.xxx.xx3
    crypto isakmp keepalive 10 4
    crypto isakmp nat keepalive 30
    crypto ipsec transform-set AES-256_SHA esp-aes 256 esp-sha-hmac
    mode transport
    crypto ipsec transform-set AES-SHA esp-aes esp-sha-hmac
    mode transport
    crypto ipsec profile GRE_TUNNEL
    set transform-set AES-SHA
    archive
    log config
      hidekeys
    ip ssh version 2
    interface Tunnel1
    bandwidth 100000
    ip address 192.168.100.103 255.255.255.0
    no ip redirects
    ip mtu 1440
    ip nhrp authentication xxxxxx
    ip nhrp map 192.168.100.1 xxx.xxx.xxx.xx3
    ip nhrp map multicast xxx.xxx.xxx.xx3
    ip nhrp network-id 100
    ip nhrp holdtime 450
    ip nhrp nhs 192.168.100.1
    ip tcp adjust-mss 1360
    qos pre-classify
    tunnel source Vlan100
    tunnel mode gre multipoint
    tunnel key 100
    tunnel protection ipsec profile GRE_TUNNEL
    interface ATM0
    no ip address
    shutdown
    no atm ilmi-keepalive
    pvc 1/50
      dialer pool-member 1
      protocol ppp dialer
    dsl operating-mode auto
    interface FastEthernet0
    switchport access vlan 100
    interface FastEthernet1
    switchport access vlan 103
    interface FastEthernet2
    switchport access vlan 103
    interface FastEthernet3
    switchport access vlan 103
    interface Vlan1
    no ip address
    ip virtual-reassembly
    ip tcp adjust-mss 1452
    shutdown
    interface Vlan100
    ip address dhcp
    ip nbar protocol-discovery
    ip nat outside
    ip inspect UserTraffic out
    ip virtual-reassembly
    interface Vlan103
    ip address 192.168.103.254 255.255.255.0
    ip nat inside
    ip virtual-reassembly
    router eigrp 100
    network 192.168.100.0
    network 192.168.103.0
    auto-summary
    no ip forward-protocol nd
    ip route 0.0.0.0 0.0.0.0 192.168.1.254
    no ip http server
    no ip http secure-server
    ip http timeout-policy idle 60 life 86400 requests 10000
    ip nat inside source list OUTBOUND interface Vlan100 overload
    ip access-list extended INBOUND
    deny   tcp any any eq 22
    deny   tcp any any eq telnet
    permit ip any any
    deny   ip any any
    ip access-list extended OUTBOUND
    permit ip any any
    deny   ip any any
    HUB
    crypto isakmp policy 10
    encr 3des
    authentication pre-share
    group 2
    crypto isakmp policy 15
    encr 3des
    authentication pre-share
    crypto isakmp policy 20
    encr 3des
    authentication pre-share
    group 2
    lifetime 7800
    crypto isakmp policy 50
    encr aes 256
    authentication pre-share
    group 5
    crypto isakmp key xxxxxxxxxx address 0.0.0.0 0.0.0.0
    crypto isakmp fragmentation
    crypto isakmp keepalive 10 4
    crypto isakmp nat keepalive 30
    crypto ipsec security-association idle-time 7800
    crypto ipsec transform-set AES-SHA esp-aes esp-sha-hmac
    mode transport
    crypto ipsec transform-set AES_MD5_TUNNEL esp-aes 256 esp-md5-hmac
    crypto ipsec profile DataTunnels
    set transform-set AES-SHA
    interface Tunnel1
    bandwidth 1000
    ip address 192.168.100.1 255.255.255.0
    no ip redirects
    ip mtu 1400
    no ip next-hop-self eigrp 100
    ip nhrp authentication xxxxxxxxxxx
    ip nhrp map multicast dynamic
    ip nhrp network-id 100
    ip nhrp holdtime 450
    ip tcp adjust-mss 1360
    no ip split-horizon eigrp 100
    qos pre-classify
    tunnel source Dialer1
    tunnel mode gre multipoint
    tunnel key 100
    tunnel protection ipsec profile DataTunnels
    interface ATM0
    no ip address
    no atm ilmi-keepalive
    pvc 1/50
      dialer pool-member 1
      protocol ppp dialer
    interface FastEthernet0
    description INTERNAL LAN
    switchport access vlan 201
    interface FastEthernet1
    switchport access vlan 201
    interface FastEthernet2
    switchport access vlan 201
    interface Vlan201
    ip address 192.168.201.254 255.255.255.252
    ip nat inside
    ip virtual-reassembly
    interface Dialer1
    ip address negotiated
    ip access-group INBOUND in
    ip nbar protocol-discovery
    ip nat outside
    ip inspect UserTraffic out
    ip virtual-reassembly
    encapsulation ppp
    ip tcp adjust-mss 1300
    load-interval 30
    no cdp enable
    router eigrp 100
    network 192.168.100.0
    network 192.168.201.0
    redistribute static
    router nhrp
    router odr
    ip nat inside source list OUTBOUND interface Dialer1 overload
    ip route 0.0.0.0 0.0.0.0 Dialer1
    ip access-list extended INBOUND
    permit ip 192.168.250.0 0.0.0.15 192.168.101.0 0.0.0.255
    deny   tcp any any eq 22
    deny   tcp any any eq telnet
    permit tcp any host xxx.xxx.xxx.xx3 eq www
    permit tcp any host xxx.xxx.xxx.xx3 eq 443
    permit tcp any host xxx.xxx.xxx.xx3 eq smtp
    permit udp any host xxx.xxx.xxx.xx3 eq isakmp
    permit esp any host xxx.xxx.xxx.xx3
    permit ahp any host xxx.xxx.xxx.xx3
    permit udp any host xxx.xxx.xxx.xx3 eq non500-isakmp
    deny   ip any any
    permit ip any any
    ip access-list extended OUTBOUND
    permit tcp any any eq smtp
    permit tcp any any eq 443
    permit ip 192.168.201.0 0.0.0.255 any
    deny   ip any any
    DEBUG
    CWT-DATA#sh ip nhrp detail
    192.168.100.1/32 via 192.168.100.1, Tunnel1 created 1w5d, never expire
      Type: static, Flags: used
      NBMA address: xxx.xxx.xxx.xx3
    CWT-DATA#sh crypto isakmp sa
    IPv4 Crypto ISAKMP SA
    dst             src             state          conn-id slot status
    xxx.xxx.xxx.xx3     192.168.1.7     MM_NO_STATE       2821    0 ACTIVE (deleted)
    Jul  4 12:53:35.551: ISAKMP:(2822):Sending an IKE IPv4 Packet.
    CWT-DATA#
    Jul  4 12:53:45.553: ISAKMP:(2822): retransmitting phase 1 MM_KEY_EXCH...
    Jul  4 12:53:45.553: ISAKMP:(2822):peer does not do paranoid keepalives.
    Jul  4 12:53:45.553: ISAKMP:(2822):deleting SA reason "Death by retransmission P1" state (I) MM_KEY_EXCH (peer xxx.xxx.xxx.xx3)
    Jul  4 12:53:45.553: ISAKMP:(2822):deleting SA reason "Death by retransmission P1" state (I) MM_KEY_EXCH (peer xxx.xxx.xxx.xx3)
    Jul  4 12:53:45.553: ISAKMP: Unlocking peer struct 0x835CCCE8 for isadb_mark_sa_deleted(), count 0
    Jul  4 12:53:45.553: ISAKMP: Deleting peer node by peer_reap for xxx.xxx.xxx.xx3: 835CCCE8
    Jul  4 12:53:45.553: ISAKMP:(2822):deleting node -32418685 error FALSE reason "IKE deleted"
    Jul  4 12:53:45.553: ISAKMP:(2822):deleting node 2092182627 error FALSE reason "IKE deleted"
    Jul  4 12:53:45.553: ISAKMP:(2822):Input = IKE_MESG_INTERNAL, IKE_PHASE1_DEL
    Jul  4 12:53:45.553: ISAKMP:(2822):Old State = IKE_I_MM5  New State = IKE_DEST_SA
    Jul  4 12:53:45.585: ISAKMP:(0): SA request profile is (NULL)
    Jul  4 12:53:45.585: ISAKMP: Created a peer struct for xxx.xxx.xxx.xx3, peer port 500
    Jul  4 12:53:45.585: ISAKMP: New peer created peer = 0x835CCCE8 peer_handle = 0x800025C0
    Jul  4 12:53:45.585: ISAKMP: Locking peer struct 0x835CCCE8, refcount 1 for isakmp_initiator
    Jul  4 12:53:45.585: ISAKMP: local port 500, remote port 500
    Jul  4 12:53:45.585: ISAKMP: set new node 0 to QM_IDLE
    Jul  4 12:53:45.585: ISAKMP: Find a dup sa in the avl tree during calling isadb_insert sa = 8333DA70
    Jul  4 12:53:45.585: ISAKMP:(0):Can not start Aggressive mode, trying Main mode.
    Jul  4 12:53:45.585: ISAKMP:(0):found peer pre-shared key matching xxx.xxx.xxx.xx3
    Jul  4 12:53:45.585: ISAKMP:(0): constructed NAT-T vendor-rfc3947 ID
    Jul  4 12:53:45.585: ISAKMP:(0): constructed NAT-T vendor-07 ID
    Jul  4 12:53:45.585: ISAKMP:(0): constructed NAT-T vendor-03 ID
    Jul  4 12:53:45.585: ISAKMP:(0): constructed NAT-T vendor-02 ID
    Jul  4 12:53:45.585: ISAKMP:(0):Input = IKE_MESG_FROM_IPSEC, IKE_SA_REQ_MM
    Jul  4 12:53:45.585: ISAKMP:(0):Old State = IKE_READY  New State = IKE_I_MM1
    Jul  4 12:53:45.589: ISAKMP:(0): beginning Main Mode exchange
    Jul  4 12:53:45.589: ISAKMP:(0): sending packet to xxx.xxx.xxx.xx3 my_port 500 peer_port 500 (I) MM_NO_STATE
    Jul  4 12:53:45.589: ISAKMP:(0):Sending an IKE IPv4 Packet.
    Jul  4 12:53:45.653: ISAKMP (0:0): received packet from xxx.xxx.xxx.xx3 dport 500 sport 500 Global (I) MM_NO_STATE
    Jul  4 12:53:45.653: ISAKMP:(0):Input = IKE_MESG_FROM_PEER, IKE_MM_EXCH
    Jul  4 12:53:45.653: ISAKMP:(0):Old State = IKE_I_MM1  New State = IKE_I_MM2
    Jul  4 12:53:45.653: ISAKMP:(0): processing SA payload. message ID = 0
    Jul  4 12:53:45.653: ISAKMP:(0): processing vendor id payload
    Jul  4 12:53:45.653: ISAKMP:(0): vendor ID seems Unity/DPD but major 69 mismatch
    Jul  4 12:53:45.653: ISAKMP (0:0): vendor ID is NAT-T RFC 3947
    Jul  4 12:53:45.653: ISAKMP:(0):found peer pre-shared key matching xxx.xxx.xxx.xx3
    Jul  4 12:53:45.653: ISAKMP:(0): local preshared key found
    Jul  4 12:53:45.653: ISAKMP : Scanning profiles for xauth ...
    Jul  4 12:53:45.653: ISAKMP:(0):Checking ISAKMP transform 1 against priority 10 policy
    Jul  4 12:53:45.653: ISAKMP:      encryption AES-CBC
    Jul  4 12:53:45.653: ISAKMP:      keylength of 256
    Jul  4 12:53:45.653: ISAKMP:      hash SHA
    Jul  4 12:53:45.653: ISAKMP:      default group 5
    Jul  4 12:53:45.653: ISAKMP:      auth pre-share
    Jul  4 12:53:45.653: ISAKMP:      life type in seconds
    Jul  4 12:53:45.653: ISAKMP:      life duration (VPI) of  0x0 0x1 0x51 0x80
    Jul  4 12:53:45.657: ISAKMP:(0):atts are acceptable. Next payload is 0
    Jul  4 12:53:45.657: ISAKMP:(0):Acceptable atts:actual life: 0
    Jul  4 12:53:45.657: ISAKMP:(0):Acceptable atts:life: 0
    Jul  4 12:53:45.657: ISAKMP:(0):Fill atts in sa vpi_length:4
    Jul  4 12:53:45.657: ISAKMP:(0):Fill atts in sa life_in_seconds:86400
    Jul  4 12:53:45.657: ISAKMP:(0):Returning Actual lifetime: 86400
    Jul  4 12:53:45.657: ISAKMP:(0)::Started lifetime timer: 86400.
    Jul  4 12:53:45.657: ISAKMP:(0): processing vendor id payload
    Jul  4 12:53:45.657: ISAKMP:(0): vendor ID seems Unity/DPD but major 69 mismatch
    Jul  4 12:53:45.657: ISAKMP (0:0): vendor ID is NAT-T RFC 3947
    Jul  4 12:53:45.657: ISAKMP:(0):Input = IKE_MESG_INTERNAL, IKE_PROCESS_MAIN_MODE
    Jul  4 12:53:45.657: ISAKMP:(0):Old State = IKE_I_MM2  New State = IKE_I_MM2
    Jul  4 12:53:45.657: ISAKMP:(0): sending packet to xxx.xxx.xxx.xx3 my_port 500 peer_port 500 (I) MM_SA_SETUP
    Jul  4 12:53:45.657: ISAKMP:(0):Sending an IKE IPv4 Packet.
    Jul  4 12:53:45.661: ISAKMP:(0):Input = IKE_MESG_INTERNAL, IKE_PROCESS_COMPLETE
    CWT-DATA#
    Jul  4 12:53:45.661: ISAKMP:(0):Old State = IKE_I_MM2  New State = IKE_I_MM3
    Jul  4 12:53:45.813: ISAKMP (0:0): received packet from xxx.xxx.xxx.xx3 dport 500 sport 500 Global (I) MM_SA_SETUP
    Jul  4 12:53:45.817: ISAKMP:(0):Input = IKE_MESG_FROM_PEER, IKE_MM_EXCH
    Jul  4 12:53:45.817: ISAKMP:(0):Old State = IKE_I_MM3  New State = IKE_I_MM4
    Jul  4 12:53:45.817: ISAKMP:(0): processing KE payload. message ID = 0
    Jul  4 12:53:45.989: ISAKMP:(0): processing NONCE payload. message ID = 0
    Jul  4 12:53:45.989: ISAKMP:(0):found peer pre-shared key matching xxx.xxx.xxx.xx3
    Jul  4 12:53:45.993: ISAKMP:(2823): processing vendor id payload
    Jul  4 12:53:45.993: ISAKMP:(2823): vendor ID is Unity
    Jul  4 12:53:45.993: ISAKMP:(2823): processing vendor id payload
    Jul  4 12:53:45.993: ISAKMP:(2823): vendor ID is DPD
    Jul  4 12:53:45.993: ISAKMP:(2823): processing vendor id payload
    Jul  4 12:53:45.993: ISAKMP:(2823): speaking to another IOS box!
    Jul  4 12:53:45.993: ISAKMP:received payload type 20
    Jul  4 12:53:45.993: ISAKMP (0:2823): NAT found, the node inside NAT
    Jul  4 12:53:45.993: ISAKMP:received payload type 20
    Jul  4 12:53:45.993: ISAKMP:(2823):Input = IKE_MESG_INTERNAL, IKE_PROCESS_MAIN_MODE
    Jul  4 12:53:45.993: ISAKMP:(2823):Old State = IKE_I_MM4  New State = IKE_I_MM4
    Jul  4 12:53:45.993: ISAKMP:(2823):Send initial contact
    Jul  4 12:53:45.993: ISAKMP:(2823):SA is doing pre-shared key authentication using id type ID_IPV4_ADDR
    Jul  4 12:53:45.993: ISAKMP (0:2823): ID payload
            next-payload : 8
            type         : 1
            address      : 192.168.1.7
            protocol     : 17
            port         : 0
            length       : 12
    Jul  4 12:53:45.993: ISAKMP:(2823):Total payload length: 12
    Jul  4 12:53:45.997: ISAKMP:(2823): sending packet to xxx.xxx.xxx.xx3 my_port 4500 peer_port 4500 (I) MM_KEY_EXCH
    Jul  4 12:53:45.997: ISAKMP:(2823):Sending an IKE IPv4 Packet.
    Jul  4 12:53:45.997: ISAKMP:(2823):Input = IKE_MESG_INTERNAL, IKE_PROCESS_COMPLETE
    CWT-DATA#
    Jul  4 12:53:45.997: ISAKMP:(2823):Old State = IKE_I_MM4  New State = IKE_I_MM5
    CWT-DATA#
    Jul  4 12:53:55.794: ISAKMP (0:2823): received packet from xxx.xxx.xxx.xx3 dport 500 sport 500 Global (I) MM_KEY_EXCH
    Jul  4 12:53:55.794: ISAKMP:(2823): phase 1 packet is a duplicate of a previous packet.
    Jul  4 12:53:55.794: ISAKMP:(2823): retransmitting due to retransmit phase 1
    Jul  4 12:53:56.294: ISAKMP:(2823): retransmitting phase 1 MM_KEY_EXCH...
    Jul  4 12:53:56.294: ISAKMP (0:2823): incrementing error counter on sa, attempt 1 of 5: retransmit phase 1
    Jul  4 12:53:56.294: ISAKMP:(2823): retransmitting phase 1 MM_KEY_EXCH
    Jul  4 12:53:56.294: ISAKMP:(2823): sending packet to xxx.xxx.xxx.xx3 my_port 4500 peer_port 4500 (I) MM_KEY_EXCH
    CWT-DATA#
    Jul  4 12:53:56.294: ISAKMP:(2823):Sending an IKE IPv4 Packet.
    CWT-DATA#
    Jul  4 12:54:05.795: ISAKMP (0:2823): received packet from xxx.xxx.xxx.xx3 dport 500 sport 500 Global (I) MM_KEY_EXCH
    Jul  4 12:54:05.795: ISAKMP:(2823): phase 1 packet is a duplicate of a previous packet.
    Jul  4 12:54:05.795: ISAKMP:(2823): retransmitting due to retransmit phase 1
    Jul  4 12:54:06.295: ISAKMP:(2823): retransmitting phase 1 MM_KEY_EXCH...
    Jul  4 12:54:06.295: ISAKMP (0:2823): incrementing error counter on sa, attempt 2 of 5: retransmit phase 1
    Jul  4 12:54:06.295: ISAKMP:(2823): retransmitting phase 1 MM_KEY_EXCH
    Jul  4 12:54:06.295: ISAKMP:(2823): sending packet to xxx.xxx.xxx.xx3 my_port 4500 peer_port 4500 (I) MM_KEY_EXCH
    CWT-DATA#
    Jul  4 12:54:06.295: ISAKMP:(2823):Sending an IKE IPv4 Packet.
    CWT-DATA#
    Jul  4 12:54:15.797: ISAKMP (0:2823): received packet from xxx.xxx.xxx.xx3 dport 500 sport 500 Global (I) MM_KEY_EXCH
    Jul  4 12:54:15.797: ISAKMP:(2823): phase 1 packet is a duplicate of a previous packet.
    Jul  4 12:54:15.797: ISAKMP:(2823): retransmitting due to retransmit phase 1
    Jul  4 12:54:16.297: ISAKMP:(2823): retransmitting phase 1 MM_KEY_EXCH...
    Jul  4 12:54:16.297: ISAKMP (0:2823): incrementing error counter on sa, attempt 3 of 5: retransmit phase 1
    Jul  4 12:54:16.297: ISAKMP:(2823): retransmitting phase 1 MM_KEY_EXCH
    Jul  4 12:54:16.297: ISAKMP:(2823): sending packet to xxx.xxx.xxx.xx3 my_port 4500 peer_port 4500 (I) MM_KEY_EXCH
    CWT-DATA#
    Jul  4 12:54:16.297: ISAKMP:(2823):Sending an IKE IPv4 Packet.
    CWT-DATA#
    Jul  4 12:54:19.537: ISAKMP: set new node 0 to QM_IDLE
    Jul  4 12:54:19.537: ISAKMP:(2823):SA is still budding. Attached new ipsec request to it. (local 192.168.1.7, remote xxx.xxx.xxx.xx3)
    Jul  4 12:54:19.537: ISAKMP: Error while processing SA request: Failed to initialize SA
    Jul  4 12:54:19.537: ISAKMP: Error while processing KMI message 0, error 2.
    CWT-DATA#
    Jul  4 12:54:25.794: ISAKMP (0:2823): received packet from xxx.xxx.xxx.xx3 dport 500 sport 500 Global (I) MM_KEY_EXCH
    Jul  4 12:54:25.798: ISAKMP:(2823): phase 1 packet is a duplicate of a previous packet.
    Jul  4 12:54:25.798: ISAKMP:(2823): retransmitting due to retransmit phase 1
    Jul  4 12:54:26.298: ISAKMP:(2823): retransmitting phase 1 MM_KEY_EXCH...
    Jul  4 12:54:26.298: ISAKMP (0:2823): incrementing error counter on sa, attempt 4 of 5: retransmit phase 1
    Jul  4 12:54:26.298: ISAKMP:(2823): retransmitting phase 1 MM_KEY_EXCH
    Jul  4 12:54:26.298: ISAKMP:(2823): sending packet to xxx.xxx.xxx.xx3 my_port 4500 peer_port 4500 (I) MM_KEY_EXCH
    CWT-DATA#
    Jul  4 12:54:26.298: ISAKMP:(2823):Sending an IKE IPv4 Packet.
    CWT-DATA#
    Jul  4 12:54:35.555: ISAKMP:(2822):purging node -32418685
    Jul  4 12:54:35.555: ISAKMP:(2822):purging node 2092182627
    Jul  4 12:54:35.795: ISAKMP (0:2823): received packet from xxx.xxx.xxx.xx3 dport 500 sport 500 Global (I) MM_KEY_EXCH
    Jul  4 12:54:35.795: ISAKMP:(2823): phase 1 packet is a duplicate of a previous packet.
    Jul  4 12:54:35.795: ISAKMP:(2823): retransmitting due to retransmit phase 1
    Jul  4 12:54:36.295: ISAKMP:(2823): retransmitting phase 1 MM_KEY_EXCH...
    Jul  4 12:54:36.295: ISAKMP (0:2823): incrementing error counter on sa, attempt 5 of 5: retransmit phase 1
    Jul  4 12:54:36.295: ISAKMP:(2823): retransmitting phase 1 MM_KEY_EXCH
    CWT-DATA#
    Jul  4 12:54:36.295: ISAKMP:(2823): sending packet to xxx.xxx.xxx.xx3 my_port 4500 peer_port 4500 (I) MM_KEY_EXCH
    Jul  4 12:54:36.295: ISAKMP:(2823):Sending an IKE IPv4 Packet.
    CWT-DATA#no debug all
    All possible debugging has been turned off

    heres the hub debug
    CWCH#
    *Jul  5 11:58:16.208: ISAKMP: set new node 1382820308 to QM_IDLE  
    *Jul  5 11:58:16.208: ISAKMP:(2116): sending packet to xxx.xxx.xxx.10 my_port 4500 peer_port 4500 (R) QM_IDLE
    *Jul  5 11:58:16.208: ISAKMP:(2116):Sending an IKE IPv4 Packet.
    *Jul  5 11:58:16.208: ISAKMP:(2116):purging node 1382820308
    *Jul  5 11:58:16.208: ISAKMP:(2116):Input = IKE_MESG_FROM_IPSEC, IKE_PHASE2_DEL
    *Jul  5 11:58:16.208: ISAKMP:(2116):Old State = IKE_P1_COMPLETE  New State = IKE_P1_COMPLETE
    *Jul  5 12:02:47.504: ISAKMP (2120): received packet from xxx.xxx.xxx.10 dport 4500 sport 62560 Global (R) QM_IDLE
    *Jul  5 12:02:47.504: ISAKMP: set new node -146383553 to QM_IDLE  
    *Jul  5 12:02:47.504: ISAKMP:(2120): processing HASH payload. message ID = -146383553
    *Jul  5 12:02:47.504: ISAKMP:(2120): processing NOTIFY DPD/R_U_THERE protocol 1
            spi 0, message ID = -146383553, sa = 0x854A7094
    *Jul  5 12:02:47.504: ISAKMP:(2120):deleting node -146383553 error FALSE reason "Informational (in) state 1"
    *Jul  5 12:02:47.504: ISAKMP:(2120):Input = IKE_MESG_FROM_PEER, IKE_INFO_NOTIFY
    *Jul  5 12:02:47.504: ISAKMP:(2120):Old State = IKE_P1_COMPLETE  New State = IKE_P1_COMPLETE
    *Jul  5 12:02:47.504: ISAKMP:(2120):DPD/R_U_THERE received from peer xxx.xxx.xxx.10, sequence 0x63A1AE3C
    *Jul  5 12:02:47.504: ISAKMP: set new node -1398198787 to QM_IDLE 
    *Jul  5 12:02:47.504: ISAKMP:(2120):Sending NOTIFY DPD/R_U_THERE_ACK protocol 1
            spi 2242383312, message ID = -1398198787
    *Jul  5 12:02:47.504: ISAKMP:(2120): seq. no 0x63A1AE3C
    *Jul  5 12:02:47.504: ISAKMP:(2120): sending packet to xxx.xxx.xxx.10 my_port 4500 peer_port 62560 (R) QM_IDLE
    *Jul  5 12:02:47.504: ISAKMP:(2120):Sending an IKE IPv4 Packet.
    CWCH#
    *Jul  5 12:02:47.504: ISAKMP:(2120):purging node -1398198787
    *Jul  5 12:02:47.504: ISAKMP:(2120):Input = IKE_MESG_FROM_PEER, IKE_MESG_KEEP_ALIVE
    *Jul  5 12:02:47.504: ISAKMP:(2120):Old State = IKE_P1_COMPLETE  New State = IKE_P1_COMPLETE
    CWCH#
    *Jul  5 12:02:52.516: ISAKMP (2120): received packet from xxx.xxx.xxx.10 dport 4500 sport 62560 Global (R) QM_IDLE
    *Jul  5 12:02:52.516: ISAKMP: set new node -459292560 to QM_IDLE  
    *Jul  5 12:02:52.516: ISAKMP:(2120): processing HASH payload. message ID = -459292560
    *Jul  5 12:02:52.516: ISAKMP:(2120): processing NOTIFY DPD/R_U_THERE protocol 1
            spi 0, message ID = -459292560, sa = 0x854A7094
    *Jul  5 12:02:52.516: ISAKMP:(2120):deleting node -459292560 error FALSE reason "Informational (in) state 1"
    *Jul  5 12:02:52.516: ISAKMP:(2120):Input = IKE_MESG_FROM_PEER, IKE_INFO_NOTIFY
    *Jul  5 12:02:52.516: ISAKMP:(2120):Old State = IKE_P1_COMPLETE  New State = IKE_P1_COMPLETE
    *Jul  5 12:02:52.516: ISAKMP:(2120):DPD/R_U_THERE received from peer xxx.xxx.xxx.10, sequence 0x63A1AE3D
    *Jul  5 12:02:52.516: ISAKMP: set new node -1245354522 to QM_IDLE 
    *Jul  5 12:02:52.516: ISAKMP:(2120):Sending NOTIFY DPD/R_U_THERE_ACK protocol 1
            spi 2242383312, message ID = -1245354522
    *Jul  5 12:02:52.516: ISAKMP:(2120): seq. no 0x63A1AE3D
    *Jul  5 12:02:52.516: ISAKMP:(2120): sending packet to xxx.xxx.xxx.10 my_port 4500 peer_port 62560 (R) QM_IDLE
    *Jul  5 12:02:52.516: ISAKMP:(2120):Sending an IKE IPv4 Packet.
    CWCH#
    *Jul  5 12:02:52.516: ISAKMP:(2120):purging node -1245354522
    *Jul  5 12:02:52.520: ISAKMP:(2120):Input = IKE_MESG_FROM_PEER, IKE_MESG_KEEP_ALIVE
    *Jul  5 12:02:52.520: ISAKMP:(2120):Old State = IKE_P1_COMPLETE  New State = IKE_P1_COMPLETE
    CWCH#
    *Jul  5 12:02:55.636: ISAKMP:(2119):Input = IKE_MESG_FROM_PEER, IKE_MESG_KEEP_ALIVE
    *Jul  5 12:02:55.636: ISAKMP:(2119):Old State = IKE_P1_COMPLETE  New State = IKE_P1_COMPLETE
    *Jul  5 12:02:55.656: ISAKMP:(2119):purging node 926310294
    CWCH#
    *Jul  5 12:02:58.000: ISAKMP (2120): received packet from xxx.xxx.xxx.10 dport 4500 sport 62560 Global (R) QM_IDLE
    *Jul  5 12:02:58.000: ISAKMP: set new node -1957053939 to QM_IDLE 
    *Jul  5 12:02:58.000: ISAKMP:(2120): processing HASH payload. message ID = -1957053939
    *Jul  5 12:02:58.000: ISAKMP:(2120): processing NOTIFY DPD/R_U_THERE protocol 1
            spi 0, message ID = -1957053939, sa = 0x854A7094
    *Jul  5 12:02:58.000: ISAKMP:(2120):deleting node -1957053939 error FALSE reason "Informational (in) state 1"
    *Jul  5 12:02:58.000: ISAKMP:(2120):Input = IKE_MESG_FROM_PEER, IKE_INFO_NOTIFY
    *Jul  5 12:02:58.000: ISAKMP:(2120):Old State = IKE_P1_COMPLETE  New State = IKE_P1_COMPLETE
    *Jul  5 12:02:58.000: ISAKMP:(2120):DPD/R_U_THERE received from peer xxx.xxx.xxx.10, sequence 0x63A1AE3E
    *Jul  5 12:02:58.000: ISAKMP: set new node -1198504167 to QM_IDLE 
    *Jul  5 12:02:58.004: ISAKMP:(2120):Sending NOTIFY DPD/R_U_THERE_ACK protocol 1
            spi 2242383312, message ID = -1198504167
    *Jul  5 12:02:58.004: ISAKMP:(2120): seq. no 0x63A1AE3E
    *Jul  5 12:02:58.004: ISAKMP:(2120): sending packet to xxx.xxx.xxx.10 my_port 4500 peer_port 62560 (R) QM_IDLE
    *Jul  5 12:02:58.004: ISAKMP:(2120):Sending an IKE IPv4 Packet.
    CWCH#
    *Jul  5 12:02:58.004: ISAKMP:(2120):purging node -1198504167
    *Jul  5 12:02:58.004: ISAKMP:(2120):Input = IKE_MESG_FROM_PEER, IKE_MESG_KEEP_ALIVE
    *Jul  5 12:02:58.004: ISAKMP:(2120):Old State = IKE_P1_COMPLETE  New State = IKE_P1_COMPLETE
    CWCH#
    *Jul  5 12:03:03.000: ISAKMP (2120): received packet from xxx.xxx.xxx.10 dport 4500 sport 62560 Global (R) QM_IDLE
    *Jul  5 12:03:03.000: ISAKMP: set new node 599666073 to QM_IDLE   
    *Jul  5 12:03:03.000: ISAKMP:(2120): processing HASH payload. message ID = 599666073
    *Jul  5 12:03:03.000: ISAKMP:(2120): processing NOTIFY DPD/R_U_THERE protocol 1
            spi 0, message ID = 599666073, sa = 0x854A7094
    *Jul  5 12:03:03.000: ISAKMP:(2120):deleting node 599666073 error FALSE reason "Informational (in) state 1"
    *Jul  5 12:03:03.000: ISAKMP:(2120):Input = IKE_MESG_FROM_PEER, IKE_INFO_NOTIFY
    *Jul  5 12:03:03.000: ISAKMP:(2120):Old State = IKE_P1_COMPLETE  New State = IKE_P1_COMPLETE
    *Jul  5 12:03:03.000: ISAKMP:(2120):DPD/R_U_THERE received from peer xxx.xxx.xxx.10, sequence 0x63A1AE3F
    *Jul  5 12:03:03.000: ISAKMP: set new node 1035716483 to QM_IDLE  
    *Jul  5 12:03:03.000: ISAKMP:(2120):Sending NOTIFY DPD/R_U_THERE_ACK protocol 1
            spi 2242383312, message ID = 1035716483
    *Jul  5 12:03:03.000: ISAKMP:(2120): seq. no 0x63A1AE3F
    *Jul  5 12:03:03.000: ISAKMP:(2120): sending packet to xxx.xxx.xxx.10 my_port 4500 peer_port 62560 (R) QM_IDLE
    *Jul  5 12:03:03.000: ISAKMP:(2120):Sending an IKE IPv4 Packet.
    CWCH#
    *Jul  5 12:03:03.004: ISAKMP:(2120):purging node 1035716483
    *Jul  5 12:03:03.004: ISAKMP:(2120):Input = IKE_MESG_FROM_PEER, IKE_MESG_KEEP_ALIVE
    *Jul  5 12:03:03.004: ISAKMP:(2120):Old State = IKE_P1_COMPLETE  New State = IKE_P1_COMPLETE
    CWCH#
    *Jul  5 12:03:08.008: ISAKMP (2120): received packet from xxx.xxx.xxx.10 dport 4500 sport 62560 Global (R) QM_IDLE
    *Jul  5 12:03:08.008: ISAKMP: set new node 230166927 to QM_IDLE   
    *Jul  5 12:03:08.008: ISAKMP:(2120): processing HASH payload. message ID = 230166927
    *Jul  5 12:03:08.008: ISAKMP:(2120): processing NOTIFY DPD/R_U_THERE protocol 1
            spi 0, message ID = 230166927, sa = 0x854A7094
    *Jul  5 12:03:08.008: ISAKMP:(2120):deleting node 230166927 error FALSE reason "Informational (in) state 1"
    *Jul  5 12:03:08.008: ISAKMP:(2120):Input = IKE_MESG_FROM_PEER, IKE_INFO_NOTIFY
    *Jul  5 12:03:08.008: ISAKMP:(2120):Old State = IKE_P1_COMPLETE  New State = IKE_P1_COMPLETE
    *Jul  5 12:03:08.008: ISAKMP:(2120):DPD/R_U_THERE received from peer xxx.xxx.xxx.10, sequence 0x63A1AE40
    *Jul  5 12:03:08.008: ISAKMP: set new node -1886395474 to QM_IDLE 
    *Jul  5 12:03:08.008: ISAKMP:(2120):Sending NOTIFY DPD/R_U_THERE_ACK protocol 1
            spi 2242383312, message ID = -1886395474
    *Jul  5 12:03:08.008: ISAKMP:(2120): seq. no 0x63A1AE40
    *Jul  5 12:03:08.012: ISAKMP:(2120): sending packet to xxx.xxx.xxx.10 my_port 4500 peer_port 62560 (R) QM_IDLE
    *Jul  5 12:03:08.012: ISAKMP:(2120):Sending an IKE IPv4 Packet.
    CWCH#no
    *Jul  5 12:03:08.012: ISAKMP:(2120):purging node -1886395474
    *Jul  5 12:03:08.012: ISAKMP:(2120):Input = IKE_MESG_FROM_PEER, IKE_MESG_KEEP_ALIVE
    *Jul  5 12:03:08.012: ISAKMP:(2120):Old State = IKE_P1_COMPLETE  New State = IKE_P1_COMPLETE
    *Jul  5 12:03:13.000: ISAKMP (2120): received packet from xxx.xxx.xxx.10 dport 4500 sport 62560 Global (R) QM_IDLE
    *Jul  5 12:03:13.000: ISAKMP: set new node 841395293 to QM_IDLE   
    *Jul  5 12:03:13.000: ISAKMP:(2120): processing HASH payload. message ID = 841395293
    *Jul  5 12:03:13.000: ISAKMP:(2120): processing NOTIFY DPD/R_U_THERE protocol 1
            spi 0, message ID = 841395293, sa = 0x854A7094
    *Jul  5 12:03:13.000: ISAKMP:(2120):deleting node 841395293 error FALSE reason "Informational (in) state 1"
    *Jul  5 12:03:13.000: ISAKMP:(2120):Input = IKE_MESG_FROM_PEER, IKE_INFO_NOTIFY
    *Jul  5 12:03:13.000: ISAKMP:(2120):Old State = IKE_P1_COMPLETE  New State = IKE_P1_COMPLETE
    *Jul  5 12:03:13.000: ISAKMP:(2120):DPD/R_U_THERE received from peer xxx.xxx.xxx.10, sequence 0x63A1AE41
    *Jul  5 12:03:13.000: ISAKMP: set new node -820358795 to QM_IDLE  
    *Jul  5 12:03:13.000: ISAKMP:(2120):Sending NOTIFY DPD/R_U_THERE_ACK protocol 1
            spi 2242383312, message ID = -820358795
    *Jul  5 12:03:13.000: ISAKMP:(2120): seq. no 0x63A1AE41
    *Jul  5 12:03:13.000: ISAKMP:(2120): sending packet to xxx.xxx.xxx.10 my_port 4500 peer_port 62560 (R) QM_IDLE
    *Jul  5 12:03:13.000: ISAKMP:(2120):Sending an IKE IPv4 Packet.
    CWCH#no debug all
    All possible debugging has been turned off
    CWCH#
    *Jul  5 12:03:13.004: ISAKMP:(2120):purging node -820358795
    *Jul  5 12:03:13.004: ISAKMP:(2120):Input = IKE_MESG_FROM_PEER, IKE_MESG_KEEP_ALIVE
    *Jul  5 12:03:13.004: ISAKMP:(2120):Old State = IKE_P1_COMPLETE  New State = IKE_P1_COMPLETE

  • My calendar won't allow me to rename calanders nor will it recognize my group calendars anymore

    My calendar won't allow me to rename a newly created calendar, whether it is a group calendar or not. I've tried restarting and it will not allow me to make a new group calander. 

    Well, after considerable time, I have figured things out and iCloud does in fact work with my Outlook 2007. I think most problems stem from the fact that iCloud doesn't work well if you also have a Mobileme account and that it works differently than traditional syncing when tethered with iTunes.
    After setting up iCloud using the Control Panel icon, open Outlook and go to Calendars.  You should see the “Calendar in iCloud” as one of you choices in the left panel.  Select the iCloud Calendar as your default Calendar by moving it up to the top and point to it for your address book.  It dosen't matter if your standard Calendar in Outlook is blank, because you are now using the iCloud calendar exclusively.  If you turn off iCloud in the control panel by signing out, iCloud will re-populate your standard Calendar in Outlook and you will no longer see the "Calendar in iCloud.  On your iOS devices, turn on iCloud and select only the iCloud calendar to view.  The iCloud Calendar will update when you make changes and Outlook and all you devices will see those changes because they are all looking at iCloud Calendar.  Your standard device Calendar or the default Calendar in Outlook do not sync with iCloud.  Contacts in Outlook will include “contacts in iCloud” on the left panel and works the same as Calendars.  When you are done out can see Calendar events and Contacts sync instantly on all you devices and in Outlook... very cool.
    You can easily remove duplicates in the iCloud Calendar or Contacts in Outlook.   See instructions here http://support.microsoft.com/kb/299349   Apple’s new iCloud software works, but they could have done a better job in anticipating these type of problems and removing them or at least explaining how to deal with them.
    I hope this helps!

  • Group Calendar and different problems

    Hey everybody,
    tried to work with wiki calendars for a shared group calednar. The basic setup went well, but now i figured out some problems:
    The DNS is setup well, and "changeip -checkhostname" works without an error. The client could ping the server with <FQDN> and getting the correct IP address. Server is 10.6.8 as well as on the client 10.6.8.
    1.) When creating an event in the shared wiki calendar: the user couldn't invite any person. The inivited person didn't get an invitation. In the shared calendar the user is marked with an "". When creating the event in the personal calendar the inviation is working (see Nr. 2 below) and the user is shown with an "?" and when accepted with an check.
    2.) Inviting an other person (within the personal calendar) will showing up the event in iCal with a grey dotted border, but he didn't get a notification in in the list. He could accept or decline by finding the event in the calendar, double click it and hit "accept" in the event window. That's working fine, but he didn't show an message when a person is invited, the event has updated or anything else.
    3.) Permissions in the wiki calendar: The user has the permissions to read the wiki, but not to write to it (assigned to it with the Webinterface).
    When the user tries to edit or deleting an existing event the following message is shown
    When clicking on "Revert to Server" the event is set back to the old data - reverted - that works fine.
    But when the user tries to create a new event, he's getting the following message:
    when click on "Revert to Server" another message is shown:
    Ignoring the message would keep the event in the calendar as well as "Go Offline" but not synced to the server. Even after manual syncing to the server or restarting iCal, he is syncing with the server but keeping that event showing up. After a few days there are so many wrong event the user didn't know what's a correct event on the server, and what's a false event.
    That's very wired, because the user might think it's on the server, but it isn't! It's just shown in the local iCal
    Could these problems be solved be reconfiguring the server (maybe command line?) or are they "bugs" in the Server?

    #1 is not possible from what I gathered through monthhs of digging through forums.  Group calendars do not send/receive invites.  I even think I saw it in the Wiki Server documentation.  Our method here is to send out the invitation from the user.. and then copy to the group calendar.  The sending of events can be a tricky one..  Here I use an email gateway because  our mailserver is separate from the ical server.
    #3  I am uncertain what you say is a problem.. if the user has read-only permissions to that group calendar any modification on his part of the read-only calendar will flag with the above error message.

Maybe you are looking for

  • Doubt in fbl1n transaction

    hi i have a doubt.... in fbl1n transaction, there are open items and cleared items. in it the cleared items  for certain document types such as invoice etc is not present in the open item table (bsik) however the cleared items for document types such

  • Regaring File to IDOC  Useing SOAP Adapter

    Hi ,     Can any one please forward me an File to idoc Useing SOAP ADapter Senario.IF i am wrong please send me a simple senario of useing SOAP Adapter. Regd's Raj

  • VIP still reachable even if primary server farm is down

    Hi, I want to make sure that the a VIP is not PING-able anymore when the primary server farm is down (all servers are down). For that I have the following configuration : serverfarm host NCL_FARM_TEST probe NCL_PROBE_HTTP rserver CHPAUN028 443 inserv

  • Front Row crashes when loading DVD

    Hey, I hope someone can help with this, I am trying to use front row to play a DVD, but after a short while front row closes. Now, as soon as i tell it to play the DVD, when it tries to load it, it just turns off. There is no unexpected closure error

  • [nQSError: 46036] Internal Assertion:  Help needed Gurus

    Hi Gurus, When i am trying to run the service, i am getting the following error : [nQSError: 46036] Internal Assertion: Condition m_pFile->Read(bytes, sizeof(data)) == sizeof(data), file server/objectmodel/Src/SORpArchivePersistStream.cpp, line 309.