Cant see itouch by itunes when in recovery mode

can not see itouch by itunes while in recovery mode

Did you do anything to the computer since it last appeared in iTunes when you connected the iPod?
See:
iOS: Device not recognized in iTunes for Windows
or
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
you can also try placing the iPod in DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

Similar Messages

  • Hello guys i recently got my iphone 4G S and when i connect it on computer i cant see it in itunes i tryed everything with restarting device reinstalling the itunes and usb fixing but i cant still see it in itunes.On other computers i can see it help plz

    Hello guys i recently got my iphone 4G S and when i connect it on computer i cant see it in itunes i tryed everything with restarting device reinstalling the itunes and usb fixing but i cant still see it in itunes.On other computers i can see it help plz

    Verify Step 2 and 3 mentioned in the article.
    http://support.apple.com/kb/TS1538

  • When I connect my apple tv to my access point upstair and connect my ipad to the same access point i cant see my apple tv when i open up the airplay menu on my ipad. but i can see the apple tv in the living room downstair which connect to the main router

    when I connect my apple tv to my access point upstair and connect my ipad to the same access point i cant see my apple tv when i open up the airplay menu on my ipad. but i can see the apple tv in the living room downstair which connect to the main router.
    Below is some info i get about ports.
    I tried to set DMZ on my main router to have full access to ported to access point upstair which is in the ip of 192.168.1.2 and the main router in the living room is the gateway router with the 192.168.1.1 ip.
    I still cant see apple tv after i try the DMZ method.
    any suggestion ?
    These network ports are used by Apple TV for communications on your network.
    TCP port 123 is used to communicate with a network time server.
    TCP port 3689 is used to communicate with iTunes while using the iTunes Library Sharing feature.
    UDP port 5353 is used by Apple TV for automatically finding computers with iTunes on your network using Bonjour.
    TCP port 80 is used for communicating with podcast servers.
    TCP port 80 and 443 are used for basic and secure communications with the iTunes Store via the Internet.
    TCP port 53 is used for regular DNS.
    These are well-known ports used by Apple products, like iTunes. If you can use all the features of iTunes, these ports are likely already open on your firewall or NAT router. Note: These ports may also used by other services such as YouTube and Flickr.

    When the Apple TV is paired with a remote, it means only that remote can control it, when it's not paired any remote can control it. You will need a remote for each of your devices.

  • My iPhone will not turn on, when I plug it into my computer and load up iTunes its in recovery mode and the only option is to restore my device to factory settings. I have no back up of my phone I've also tried the home/sleep button thing but nothing

    My iPhone 4 will not turn on, when I plug it into my computer and load up iTunes its in recovery mode and the only option is to restore my device to factory settings, I have no back up of my phone I've also tried the home/sleep button thing but nothing, I have literally done every method I was told, I checked for water damage and that's fine. I don't want to restore my phone or buy a new one or pay for repairs because that's wasting money when it could be a simple way to fix it. And yes, I've also tried charging it and turning it in. I really need some help with my phone

    That does happen.  It depends on how hard the server is being hit, as well as the connection speed of your system.  If you are on a windows system, you will want to disable any antivirus or firewall software during the download.

  • How can i sync videos to my iphone 5 using Itunes 11. i also tried to convert the videos to mp4 and drag and drop the file in itunes but still i cant see videos in itunes library.

    how can i sync videos to my iphone 5 using Itunes 11. i also tried to convert the videos to mp4 and drag and drop the file in itunes but still i cant see videos in itunes library.

    Copied from this link.
    http://www.apple.com/iphone/specs.html
    Video formats supported: H.264 video up to 1080p, 30 frames per second, High Profile level 4.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; MPEG-4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format
    There are 3rd party utilities available that "rip" content into a compatible format - most include an iPod and/or iPhone format selection. If a video plays in iTunes, iTunes includes an option to convert a selection for iPod/iPhone.

  • Should my iTunes logo be red when in recovery mode (dfu mode)

    should my iTunes logo be red when in recovery mode (dfu mode)

    Tthe itunes logo has changed in ios 8 and in OS X  Yosemite , it is now red.

  • My iPod touch 5 will not turn on, charge, is not recognized by computer or iTunes, will only be recognized when in recovery mode but then an error 1601 occurs and iPod then goes back to being dead and nothing happens

    My pod is literally not breathing, no screen display no matter what, I've tried everything, wondering if there's anything I've missed :( please help

    Error 1604
    This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
    If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
    Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode,put it into Recovery Mode.
    Restore and wait for the error.
    When prompted, click OK.
    Close and reopen iTunes while the device remains connected.
    The device should now be recognized in Recovery Mode again.
    Try to restore again.
    If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
    Error 1600, 1601, 1602
    Follow the steps listed above for Error 1604. This error may also be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.

  • How do i restore when in recovery mode and itunes does't recognise it

    i tried to restore my ipod and accidently unplugged it, now itunes is telling me that itunes has detected an ipod in recovery mode. and that i must restore my ipod before using it in itunes. but i can't figure out how to restore it with out it showing up in itunes.

    Download the right ipsw corresponding with your ipod from the link.after installation is done.connect to itunes hold down the power and home button for 15 seconds. when you see the resoe ipod hold down option and finder will pop up. find the ipsw that you downloaded and then click on it and choose open.
    http://osxdaily.com/2013/10/22/ios-7-0-3-available-now-ipsw-direct-download-link s/

  • Do not disconnect....Do not disconnect...Cant see ipod in ITunes

    I am a rookie at this whole ipod thing...Here goes...I have downloaded about 500 songs so far on my 30gig ipod and now when I go to plug into the USB port all I fricken get is "Do not disconnect"...but hold on...I also cant see my ipod anywhere on the itunes "dock" or whatever you call it.
    Does anyone have any suggestion...much appreciated...And since I can't see my ipod I also can't download or do anything with it really
      Windows 2000  

    I had that happen to me the very first time I tried using it. But I reset the Ipod, then connected it and Itunes was able to find it.
    I'm not sure if that is your problem, but have you tried that?
    I'm a novice myself, trying to learn all I can as I recieved the Ipod for christmas, and am still learning.
    I need to learn how to get my music videos from DVD onto my Ipod.

  • Ipod Nano...cant see it in itunes...locks up itunes..

    I have a brand new ipod nano...less than a week old. Worked fine until yesterday...it locked up, then I lost all of my music. When I tried to connect to itunes...it doesnt show up in itunes when connected. When I disconnect, it says it needs to restore to factory settings. Which would be fine...but it locks up itunes and I cant do anything. Does any one have any suggestions. I am not very happy at this point. I am curretnly using windows Vista and the latest version of Itunes. I have uninstalled and reinstalled itunes to see if that would help and it didnt. So, I am at a loss. Please help.

    Okay...got mine working...here is what i did....uninstalled and reinstalled both Itunes and quicktime on my computer. Still wouldnt work, still locked up my computer. I found another computer that had an older version of itunes on it...connected my ipod to it, and it finally restored my ipod settings. Took it home to connect it to mine, and it worked. Hope this helps anyone else out...Especially since this seems to be a reoccurring problem that Apple isnt taking care of. good luck

  • Windows doesn't recognize ipod touch 4g even when in recovery mode, what can i do. itunes doesn't detect it either.

    when i try to conect my ipod touch 4g to my laptop, it doesn't recgonize it itunes doesn't either. at first i would get a pop up from my laptop saying something about the driver buit now nothing happens, but when i try to connet an ipad or ipod nano 3g everything works fine, i have the latest version of itunes and i have firmware 4.3.5 on my ipod. please help.

    What happens when you connect to computer and restore via iTunes?
    Without knowing that:
    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • Cant see iphone in itunes after the most resent itunes update

    After updating itunes I downloaded the new iphone IOS. After connecting my phone, an error msg could not update iphone. Now my phone has the connect to itunes screen and will not come off regardless of what i do. I cant see it on the computer or itunes now. Ive uninstalled and reinstalled itunes and a number of other things on the apple website, no joy. To me it sounds like a software problem to me, but i dont know. Does anybody have ANYTHING else?

    I had the same problem yesterday and called Apple Support and was walked through uninstalling iTunes (I had just gotten the latest update to it) and reinstalling it. My computer (Windows Vista) did not recognize the phone and would not sync. I powered down my computer, took it home, powered it up and plugged in my iPhone 4 with a different sync cable and it worked. The computer found an Apple driver that it couldn't find with the other cable. The defective cable will still charge my iPhone 4, but it will not sync. I have used that same cable since October, and it is the original shipped with the product. Go figure. I have not yet updated to iOS 4.3 and am going to wait a bit.

  • Cant see tables i created when querying.

    I cant see the tables i created,when iam making a query.but the table is there in my object explorer window.iam using MSSql server 2012.help is much appreciated.

    Are you sure you're querying in the right database?
    Try this first and see if your tables are listed
    SELECT TABLE_NAME FROM INFORMATION_SCHEMA.TABLES WHERE TABLE_NAME IN ('YourTable1','YourTable2',..)
    Another reason can be tables got created in a schema different from your default schema
    In that case first identify the schema using
    SELECT TABLE_NAME,TABLE_SCHEMA FROM INFORMATION_SCHEMA.TABLES WHERE TABLE_NAME IN ('YourTable1','YourTable2',..)
    Then select from table as
    SELECT * FROM SchemaName.TableName1
    SELECT * FROM SchemaName.TableName2
    Please Mark This As Answer if it solved your issue
    Please Vote This As Helpful if it helps to solve your issue
    Visakh
    My Wiki User Page
    My MSDN Page
    My Personal Blog
    My Facebook Page

  • Ipod not recognized in itunes, stuck in recovery mode (tried everything)

    I've had my ipod touch for about a year now, and the other day itunes told me I needed to download the new software and such. FYI, I use Vista (unfortunately. Probably not helping with the problem).
    I am aware that this is a common problem. I have *tried everything* I can find at the moment, when I plug it into a different laptop nothing happens.
    - I download itunes 9 etc and suddenly it says "ERROR OCCURRED" or something, I don't remember the error message too well (sorry).
    - This didn't surprise me, I am used to itunes/ipods messing up on me. So I wait a while, and download the new software again. It installs.
    *- A screen on my ipod appears with the itunes logo, a usb cable and "itunes".*
    - I connect the ipod to the laptop. Nothing happens. Vista pops up saying:
    *'Windows needs to install driver software for your Apple Mobile Device (Recovery Mode)*
    - Locate and Install driver software (recommended)
    - > Ask me again later
    - Don't show this message again for this device'
    I click the first, it asks me for a disk {which obviously I don't have), when I click 'show me other options' it tells me it couldn't find driver software. Clicking on anything from here results in nothing or failure to find the driver or whatever.
    *I've tried everything on this site including* rebooting, reinstalling, completely destroying any trace of itunes and associated programs on my computer (using Windows install cleanup too) and then installing again, manually disabling/enabling/repairing/everything else under the sun to the driver in the driver menu. The same thing happens every time.
    So uh, any help? I've backed up everything on my harddrive so I'm open to practically anything. I'm so sick of errors with ipods, I've never had so much trouble with any other gadget ): Maybe I'm just cursed lol.

    After hours of searching for a fix I may have found one on a Mac Forum. This worked for mine but I had to restore it from the last back up. I also gave me the option of restore to new condition (out of hte box) but Ichoose from the last backup that itunes made. It took about 4 hours to fully restore all my 24gb of material. BUT,Now it's working perfectly. For how long...who knows?
    Here's the link to the page where I found the info. http://forums.macrumors.com/showthread.php?t=447185
    Below is the solution that worked for my 2nd gen 32 gig.
    "Originally Posted by vegas-steven
    try and do this:
    1. start itunes.
    2. plug the ipod into your computer
    3. hold the power (on top) and home (on front) buttons for a few seconds.
    the ipod should power up, and if if is screwed up, will be in recovery mode... from there itunes will tell you that it finds your ipod in that mode, and needs to restore it.
    just click restore, sit back and it should work again.
    did you hack it at all?
    if you did not hack it, and that doesnt work, call applecare and see what they say. maybe it is faulty?
    still, from my experience with my friends ipod that i made 100% unusable, there is a way to restore even the most broken ipod as long as it has a battery charge.
    i suspect a small portion of the memory is dedicated to keeping emergency boot files that allowe you to restore, no matter how bad things get."

  • Update iPod on iTunes, went into recovery mode

    I had an update on my iPod so when i was on iTunes it said to update so I did. It went into recovery mode, but i was luckily able to get it out (idk how lol). But i need to update it because my FaceTime isn't working and I am afraid it will do this again. Also when i try to update using just my iPod it gives me an error message saying it cannot update, any help?

    The connect to computer and update via iTunes. See that topic here:
    iOS: How to update your iPhone, iPad, or iPod touch
    Make sure yo backup to both iTunes and iCloud before updating.

Maybe you are looking for

  • Stop JcomboBox dropdown

    Hi everyone, I have a requirement to not allow the dropdown list of JComboBox to pop up in certain situations. I could disable the combo box, but that is not the preferred option. I tried to over write JComboBox.firePopupMenuWillBecomeVisible(). The

  • What is " factory reset"? How/Why to use it?

    What is the "factory rest" feature?  How and when should I use it?

  • Time Dependant Hierarchy in BEx

    Hi All, I have created a query on top of 0PS_C04. In my master 0Project i have a hierarchy which is being displayed through BEx. Now with every new fiscal year, new projects are added to the hierarchy. When I run the query then all the projects of th

  • How to print column wise records

    Hi, I am very sorry. Actually i have searched many pages but i didn't find my solution. plez any body halp me out from this problem.. Actually my table structure is this.. Employe_payroll:- Empid|Salary|Month|Year So record stores in row wise in each

  • Inf reg process chains design

    Hi All, My process chain is done succesfully.. I followed as Main Chain Start->Delete Data (3ods)->Load data(3ods)->Activate(3ods)-> And(all success ful)->2local process chains(series to and) -> Materdata Load(parallel to and)->Attribute change run L