Cant see my full view in edit window

Hi im new to mac and logic 9. In my edit window where you record your music, I cant see the full veiw of the edit window. I mean, at the top where you have the numbers on the ruler that makes up bars, I cant see the first bar. My view on the ruler in the edit window starts at 2 and goes on. How can I set it where I can see the full view of the ruler starting at number one? Thanks I hope at said this right.

Click and drag the Start marker point to the left
[Setting Project Properties|http://documentation.apple.com/en/logicpro/usermanual/index.html#cha pter=7%26section=8] look on How to define a project's Start Point
A

Similar Messages

  • I cant see the full list in apple tv.i see only setting

    i cant see the full list in apple tv.i see only setting

    Have you unpowered it for a minute or so and restarted?

  • View in edit window not getting updatet properly

    Hello
    I have some problems with the view in the edit window not getting updatet correctly. I noticed this in spectral view. For example, when I zoom in very much, so I only see about 3 seconds of audio and then select one second of audio and do a time stretch, so it will be two seconds of length, the windows does not update properly.
    Normally the audio behind the strechted selection should move backwards, but often the strechted portion just sort of overlaps it and it doesn't move. When I zoom out and then back in, it seems to be ok.
    I also have had very weird behavior when trying to remove clicks, with the view also getting pretty messed up.
    Does anyone have similar problems with the view not getting updated properly?
    I am running german windows xp, audition is installed in english. I first thought that installing it in english instead of german solves the problems, but unfortunately it didn't.
    Greetings

    Hello again
    I made a movie of this behavior:
    https://share.ols.inode.at/4NNYXR4HT2CJI5IHY273R9NRHRW9OLGR95Q7VTOP
    It shouldn't look like that, right?
    Greetings

  • IPhoto 6.0.5 - No full screen; no edit windows

    For some reason the Edit windows for exposure, etc., have disappeared. I checked "help" and find that I can neither switch to a full screen nor see the "edit" buttons after hitting "edit." All I get are the "enhance", "crop," etc. I know I had these before, but now they are not available. Any ideas to correct? thanks.

    You may also try the following link to replace the AppleAppSupport.framework.
    This helped me.
    http://homepage.mac.com/dsjosephson/iphoto6framework/FileSharing24.html
    bimism

  • When I convert to pdf I cant see my full document when I download

    When I convert my word document to pdf, when I view it in acrobat I see the full document but when I download and open I do not see my full document...
    A dialog bog then appears telling me that font page is required and redirects me to download the font pack, which I do... but I still dont see my full document and the dialog box keeps appearing and keeps redirecting me to download again...
    Please help
    TalenteP

    Hi,
    It seems that your PDF file requires Asian fonts to draw the text so please make sure the Asian font package was installed from Adobe web site then close your Adobe Reader and reopen the PDF file in Reader .
    Hisami

  • Black screen in full view.(editing)

    I have imported photos from a CD. One album that I created the photos are able to be seen in the thumbnail view, butt when I click on it to view full screen and edit I get a black screen. I have had no other problems with the or CDs I imported. Thanks Brain

    hit the "ESC" key or move the cursor to the very top of the screen, then click the blue icon at the top-right:

  • Possible To View Two Edit Windows Simultaneously?

    Is there a way to either view 2 files simultaneously (as in the MS "compare side-by-side," etc.) in edit view? Or at the least, quickly toggle between the windows when two files are open? I need to bounce back and forth between 2 or more files a lot, but each time I'm having to go to the Window" drop-down menu, and click on the window I want to see. That's slowing down my workflow.
    I did a search of the Help and Knowledgebase but didn't find anything.
    Thanks.
    Ken

    For viewing two audio files 'side by side', it's better to align them horizontally, isn't it? The Multitrack view (MV) is ideal for this. You can expand the the vertical track size so that you see only two waveforms, having a good view at each. You only need to engage the Mute or Solo buttons for each track to switch between them. If you set any markers (F8) it will actually appear in either view, should you opt to open a wave in Edit View (one at a time).
    What is "editing" anyway? Does it always mean altering the content of the wave (only possible in EV), or does drawing volume curves and moving things around in MV account as editing too?
    You can alter the volume of a section in EV destructively and compare the result with the original perhaps, aligned in MV.
    You can also draw different volume curves on two instances of the same wave in MV, and then compare the
    audible result. Note that you can actually slice, delete and move sections of your wave around in MV as well. This way you can have several working copies of your edit (indeed?) easily available for comparison.

  • Cant see entire art board in print window

    Hello, I seem to be having some issues when it comes to printing through illustrator CC.
    When you open the print dialog box the piece I am trying to print looks tiny in the print window
    and always gets cut off because I cant resize it to fit the window properly.
    I have attached a screen shot.
    My question is how do I get the print window back to the way it use to be where you could see the entire file in the print dialog box? I have uninstalled the program and deleted all the preferences and when I reinstalled it
    I still have the same issue.

    yes it shows album art in my itunes player in my laptop when i play song.
    but that same song when i sync in my iphone, in my ipod player it doesnt show ablum art.
    cant able to understand what is the problem...

  • Can't see the full view of image

    My problem. when I click a thumnail pic it shows its loading but I never can see the image its just black but if I use the loupe tool I can see the image.
    any help please!!!

    Imported 555 Nikon NEF (raw images) direct from D2X via USB into a single project.
    The thumbnails show fine, but some images, when I choose them, display "Loading..." then turn black in the viewer. The Loupe reveals normal details, though the onscreen image is black. If I move away and back, the loupe then only shows black.
    If I "export master" I get a Nikon NEF on my desktop that I can view with Mac OS X standard built-in Preview app. If I import that master back into Aperture, I can view it fine. In the meantime, the original (that I exported) remains black.
    This didn't seem to happen when I had browsed the images immediately after importing. It seemed to start happening after I had applied Levels etc to some of the images in the project. Seems to happen with increasing frequency after I've edited more images in the project.
    I do not have two screens or a second video card. Running the updated Aperture (which is much faster now on stacking).
    G5 Quad   Mac OS X (10.4.3)   6.5 GB RAM / CD 30" / Aperture

  • Enhanced WDC cant embed the new view in new window

    Dear Experts,
    i have enhanced the HRTMC_LP_CONFIG_CONTROL with new VIEW V1 and new WINDOW W1. Saved the component enhancement. Now when i wish to embed the newly created view V1 by  right click on the W1 to embed the View,  F4 does not list the VIEW V1?
    i have saved the comp.
    i am in enhancement mode.
    Best Regards
    Prashant

    Sorry for the hassle it does seem to start listing the new view after couple of try & activation's !!

  • DB Connect- Cant see tables and views in SQL DB

    HI,
          I successfully managed to connect a MS-SQL DB using DB connect. I am able to connect to the system (Check Connection). When i try to see the Views and Tables available in the SQL DB, it says there are no tables or views available. The SQL DB has granted permission for the SAP User to access certain views and tables. Still it is not showing any. Any help would be appreciated
    Thank You

    hi,
    check things to be followed in oss note 512739
    ( pdf 'Transferring Data with DB Connect' https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/2f0fea94-0501-0010-829c-d6b5c2ae5e40 )
    make sure ...
    1. You have to create a special login for the extraction.
    You should add this login to the db_ddladmin database role in the corresponding database. This generates a similar DB user at database level. The user you use must have the 'CREATE VIEW' authorization at least. This is contained in the mentioned role.
    2. For the extraction, you should only use DB views that were created under this DB user. (See also type conversion, naming convention, and so on).
    3. The selected user should be granted the required authorizations (SELECT at least) on the source tables, or on the columns of these tables.
    4. The especially created login is to be used in the logon information when you are setting up the DB source system in BW.
    hope this helps.

  • Cant see my full contacts list

    I have lost approx 300 contacts when I search a contact I know is in there (ie when they call my iohone their name is displayed) it isn;t displayed. Is this a setting problem? Any suggestions much appreciated - ps not backed up to iclous :-(

    Check your groups in the Contacts app.
    Open the Conatcts app > Groups (top right)

  • TS1468 i cant see the album view tiles shown at the start of this help article

    Trying to find out how to get compilations to appear as one album and not broken up into several in the display.
    Only help on line appears very very old for version 7/8 nothing for version 11.
    "Help" does not help.
    Old on line article says to mark as compilation but this option does not show in version 11. itunes.

    Tried to work with the CTRL+I and sort fields.
    Entered all the data, took over an hour. No joy still wont display some songs as albums.
    Tried selecting all and ticking the sort fields. Deleted all the data I just entered.
    Ouch.
    Already finding Apple product unfreindly and expensive best solution may be to go the a player that works instead.
    Considerig alternative hardware, s/w used by other family memebers without this kind of frustration.

  • Cannot see full view/edit photo but thumbnail ok

    Hi. I have recently imported a load of photo's and have found that when I click on a thumbnail or select full view or edit the photo appears briefly & then disappears. Don't know why. I have followed the advice from Apple (although it relates to iphoto6 & I using iphoto8) plus a suggestion in the discussion forum about deleting the iphoto.plist from my preference file. But this has not helped.
    Any advice would be grateful.
    Please note that the above only relates to a an import I have recently done. The old 'events' etc work fine. Also the photo's that disappear from the recent import appear to only be ones that are full 6x4 ratio... when I have cropped them (previously in photoshop) they do not suffer from this.
    Thanks,
    Paul

    Not sure the big-endian/little-endian thing is the problem.
    I went back to the original image, which was little-endian, imported it to iphoto and it displays the same behavior. Here's part of the exif info:
    ---- File ----
    File Name : gayhead.jpg
    Directory : /Users/tomboyd/Pictures/iPhotoLibraries/iPhoto Library/Originals/2005/Jan 9, 2005_9
    File Size : 2.9 MB
    File Modification Date/Time : 2007:12:01 18:41:59-05:00
    File Type : JPEG
    MIME Type : image/jpeg
    Exif Byte Order : Little-endian (Intel, II)
    Image Width : 2707
    Image Height : 1797
    Encoding Process : Baseline DCT, Huffman coding
    Bits Per Sample : 8
    Color Components : 3
    Y Cb Cr Sub Sampling : YCbCr4:4:4 (1 1)
    ---- JFIF ----
    JFIF Version : 1.02
    Resolution Unit : inches
    X Resolution : 180
    Y Resolution : 180
    exif from the other version
    ---- File ----
    File Name : 8 Gayhead.jpg
    Directory : /Users/tomboyd/Desktop
    File Size : 4.0 MB
    File Modification Date/Time : 2009:03:03 14:22:14-05:00
    File Type : JPEG
    MIME Type : image/jpeg
    Exif Byte Order : Big-endian (Motorola, MM)
    Image Width : 2707
    Image Height : 1797
    Encoding Process : Baseline DCT, Huffman coding
    Bits Per Sample : 8
    Color Components : 3
    Y Cb Cr Sub Sampling : YCbCr4:4:4 (1 1)
    ---- JFIF ----
    JFIF Version : 1.01
    Resolution Unit : inches
    X Resolution : 180
    Y Resolution : 180

  • Full view of photo's in a project

    I would really really like to be able to click on photo's in a project and be able to see a full view. Before, this was possible. How do I do this?

    I'm not sure this is the solution. In iPhoto '08 you were able to get a full view of a photo when you clicked on it, even though it was already in an album (the ones you order..). In iPhoto '11 this doesn't seem possible anymore. Only on the right you can see al your photo's, but these are pretty small.
    Regards

Maybe you are looking for

  • When I sign into iCloud on iPhone the setting App Crashes

    I sign into iCloud in setting on my iPhone.  As soon as that happens, the setting App crashes.  The same thing happens when I try to go to my mobile me email settings.  The app Just crashes for no reason.  How can native iPhone apps made by apple, cr

  • Urgent SAP Help menu not showing option "Create Support Message"

    Hi all, We are running SAP 4.6c landscape (dev,qa,prd), and have solution manager installed . Now when i want to create a support messge from any system in my landscape i dont get the option "Create Support Message" in the SAP Help menu, and we creat

  • Urgent: cannot access to discoverer plus

    Hi!! When I access to the http://my-machine:7777/ page, "New Features" -> Business Intelligence page, on the bottom there is a link : Demonstrations -> Business Intelligence and Forms -> Discoverer. My problem is that I cannot access the page, it say

  • Profile down after new modem installation

    Hi there, I had Business infinty installed recently and have had similar problems to a couple of other forumites: Had the same 2 week modem failure problem, the engineer came round yesterday and installed a new one and after a few shaky hours my conn

  • Headset & Video Volume Problem

    Phone operates like the ear buds are plugged in when it isn't.  Texts & email notifications vibrate instead of sound notifications.  Video volume slider only appears when the headset is actually plugged in.  How do we fix this?