Cant see second harddrive (ntfs) [SOLVED]
Hi,
I am new to Archlinux, I moved from Ubuntu with Gnome couple of days ago. I set up my arch pretty successfully - I have an XFCE running, with all the software I had on Ubuntu (made me love pacman). I think my problem has an easy solving, but I didnt manage it myself so I am asking.
I put Arch on my sda (had it autoprepare) and I left sdb with no change (only photos and vids storage). But I cant just access (see) the sdb disk.
when I run fdsik -l I get
Disk /dev/sda: 40.0 GB, 40020664320 bytes
255 heads, 63 sectors/track, 4865 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x0f610f60
Device Boot Start End Blocks Id System
/dev/sda1 * 1 5 40162 83 Linux
/dev/sda2 6 136 1052257+ 82 Linux swap / Solaris
/dev/sda3 137 1666 12289725 83 Linux
/dev/sda4 1667 4865 25695967+ 83 Linux
Disk /dev/sdb: 40.0 GB, 40020664320 bytes
255 heads, 63 sectors/track, 4865 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x0fae0fad
Device Boot Start End Blocks Id System
/dev/sdb1 1 4865 39078081 7 HPFS/NTFS
How can I make sdb visible in XFCE? Thanks for your help. Joenas
Last edited by Joenas (2009-01-12 17:38:38)
all I had to do, was to create the damn /mnt/data folder. Now the disk mounts there automatically. Everythings fine. You can add the [SOLVED] tag here...
thx InfernalH
Joenas
Similar Messages
-
T400 Vista 64bit cant see second monitor in port replicator
I installed Vista Business 64bit on my machine that came with 32bit Vista. I was able to download all the drivers. Everything works except it will not see my second dislpay on the port replicator. It sees the VGA display but not the DVI one.
Although the ATI software installed , I cannot use the control center. It says Ati catalyst control center cannot be started becuase the current active GPU is not supported.
Tried calling support and they wont help me becuase the machine came with 32.
If I go in through thw windows display setup it doesn't see the second monitor. This all worked with it was 32 bit vista.
Anyone know of any way around this without going back to Vista 32?
Product: ThinkPad T400 2765-T7U
Original description: T9400(2.53GHz), 2GB RAM, 160GB 7200rpm HD, 14.1in 1440x900 LCD, 256MB ATI Radeon 3470HD, CDRW/DVDRW, Intel 802.11agn, Bluetooth, Modem, 1GB Ethernet, UltraNav, Secure chip, Fingerprint reader, Camera, Intel Turbo Memory, 9c Li-Ion, WinVista Business 32 (now 64)
Message Edited by ov10mech on 03-25-2009 06:56 AMSolved.. uninstalled the Intel driver and reinstalled and everything worked after that.
-
Hi i have problem in my security question email is blocked and i cant rested my security question in second emial becouse i cant see this linked
You need to ask Apple to reset your security questions. To do this, click here and pick a method; if that page doesn't list one for your country or you're unable to call, fill out and submit this form.
(117310) -
HP 15-g009ax cant see my second graphics memory and its name
I recently bought a HP 15-G009ax after one week i checked video drivers theres two drivers in display adapter
1. AMD Radeon R5
2. AMD Radeon HD 8500M
so then i checked video memory going in run and typed dxdiag there display tab checked Approx. Total memory is 4073MB
and when i bought this laptop from flipkart there only 2 gb of graphics memory so i want to know what is this and why i cant see 2nd graphics correct name@arbaz ,
Hello and thank you for posting on the HP support forums.
I am sorry but I am not understanding what you are asking. If you see two display adapters you are looking at the main graphics adapter and then the GPU. The GPU is part of the systems CPU. One is dedicated and the other is part of the CPU.
So getting back to your question what exactly are you asking.
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
D5GR
I work on behalf of HP -
Hi. please solve my problem.
.call information such as call waiting,call forwarding, call holding is not working when caller the call me or im wait for my call i cant see any title by iphon , and also holding is the same.2. there is not any option for call baring.3.playback music is not hearing by second partner during the call.4.i cant select ringing ton from saving tons.
thank you in advance.Hi Ersin,
Exception 1 would seem to be FORMATTING_ERROR, which suggests something in the design of the Smartform. However, that doesn't fit with the form being generated from a report, but only erroring when called from a function module. I can think of no reason why the different calling method would be a factor.
When FORMATTING_ERROR is raise it should also set a message ID and number, are you able to determine what they are?
Regards,
Nick -
Help please...cant see sms inbox
cant see sms inbox...
there a notification:
uncaught exception:java.lang.nullpointerexception
anyone can help me..???Do a simple reboot of your BlackBerry and look again.
With the BlackBerry device powered ON, remove the battery a few seconds and then reinsert the battery to reboot.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Cant see google chat in gmail only on FF4B2
cant see google chat in gmail only on FF4B2 . while using other browsers or the previous beta version, there was no problem
First, try to update to beta 3.
Second, it is likely that the plugin got disabled due to unproven compatibility, if you install this other addon [https://addons.mozilla.org/en-us/firefox/addon/15003/ here] , it might solve your problem.
Thanks for asking. -
IPsec over GRE not coming up, cant see why, debug inc...
Hi all,
Rattling my brains here, as far as i can see everything is fine, it should be working, but for some reason its not, and i cant see anything in the debug thats hinting to the reason why, can anyone help me out with this?
im normally good at this stuff, but this time its got me!
the hub config works with many 3 other spokes configured in the same way!
Thanks for any help guys
SPOKE
crypto isakmp policy 10
encr aes 256
authentication pre-share
group 5
crypto isakmp key xxxxxxxxxxxxxxxxx address xxx.xxx.xxx.xx3
crypto isakmp keepalive 10 4
crypto isakmp nat keepalive 30
crypto ipsec transform-set AES-256_SHA esp-aes 256 esp-sha-hmac
mode transport
crypto ipsec transform-set AES-SHA esp-aes esp-sha-hmac
mode transport
crypto ipsec profile GRE_TUNNEL
set transform-set AES-SHA
archive
log config
hidekeys
ip ssh version 2
interface Tunnel1
bandwidth 100000
ip address 192.168.100.103 255.255.255.0
no ip redirects
ip mtu 1440
ip nhrp authentication xxxxxx
ip nhrp map 192.168.100.1 xxx.xxx.xxx.xx3
ip nhrp map multicast xxx.xxx.xxx.xx3
ip nhrp network-id 100
ip nhrp holdtime 450
ip nhrp nhs 192.168.100.1
ip tcp adjust-mss 1360
qos pre-classify
tunnel source Vlan100
tunnel mode gre multipoint
tunnel key 100
tunnel protection ipsec profile GRE_TUNNEL
interface ATM0
no ip address
shutdown
no atm ilmi-keepalive
pvc 1/50
dialer pool-member 1
protocol ppp dialer
dsl operating-mode auto
interface FastEthernet0
switchport access vlan 100
interface FastEthernet1
switchport access vlan 103
interface FastEthernet2
switchport access vlan 103
interface FastEthernet3
switchport access vlan 103
interface Vlan1
no ip address
ip virtual-reassembly
ip tcp adjust-mss 1452
shutdown
interface Vlan100
ip address dhcp
ip nbar protocol-discovery
ip nat outside
ip inspect UserTraffic out
ip virtual-reassembly
interface Vlan103
ip address 192.168.103.254 255.255.255.0
ip nat inside
ip virtual-reassembly
router eigrp 100
network 192.168.100.0
network 192.168.103.0
auto-summary
no ip forward-protocol nd
ip route 0.0.0.0 0.0.0.0 192.168.1.254
no ip http server
no ip http secure-server
ip http timeout-policy idle 60 life 86400 requests 10000
ip nat inside source list OUTBOUND interface Vlan100 overload
ip access-list extended INBOUND
deny tcp any any eq 22
deny tcp any any eq telnet
permit ip any any
deny ip any any
ip access-list extended OUTBOUND
permit ip any any
deny ip any any
HUB
crypto isakmp policy 10
encr 3des
authentication pre-share
group 2
crypto isakmp policy 15
encr 3des
authentication pre-share
crypto isakmp policy 20
encr 3des
authentication pre-share
group 2
lifetime 7800
crypto isakmp policy 50
encr aes 256
authentication pre-share
group 5
crypto isakmp key xxxxxxxxxx address 0.0.0.0 0.0.0.0
crypto isakmp fragmentation
crypto isakmp keepalive 10 4
crypto isakmp nat keepalive 30
crypto ipsec security-association idle-time 7800
crypto ipsec transform-set AES-SHA esp-aes esp-sha-hmac
mode transport
crypto ipsec transform-set AES_MD5_TUNNEL esp-aes 256 esp-md5-hmac
crypto ipsec profile DataTunnels
set transform-set AES-SHA
interface Tunnel1
bandwidth 1000
ip address 192.168.100.1 255.255.255.0
no ip redirects
ip mtu 1400
no ip next-hop-self eigrp 100
ip nhrp authentication xxxxxxxxxxx
ip nhrp map multicast dynamic
ip nhrp network-id 100
ip nhrp holdtime 450
ip tcp adjust-mss 1360
no ip split-horizon eigrp 100
qos pre-classify
tunnel source Dialer1
tunnel mode gre multipoint
tunnel key 100
tunnel protection ipsec profile DataTunnels
interface ATM0
no ip address
no atm ilmi-keepalive
pvc 1/50
dialer pool-member 1
protocol ppp dialer
interface FastEthernet0
description INTERNAL LAN
switchport access vlan 201
interface FastEthernet1
switchport access vlan 201
interface FastEthernet2
switchport access vlan 201
interface Vlan201
ip address 192.168.201.254 255.255.255.252
ip nat inside
ip virtual-reassembly
interface Dialer1
ip address negotiated
ip access-group INBOUND in
ip nbar protocol-discovery
ip nat outside
ip inspect UserTraffic out
ip virtual-reassembly
encapsulation ppp
ip tcp adjust-mss 1300
load-interval 30
no cdp enable
router eigrp 100
network 192.168.100.0
network 192.168.201.0
redistribute static
router nhrp
router odr
ip nat inside source list OUTBOUND interface Dialer1 overload
ip route 0.0.0.0 0.0.0.0 Dialer1
ip access-list extended INBOUND
permit ip 192.168.250.0 0.0.0.15 192.168.101.0 0.0.0.255
deny tcp any any eq 22
deny tcp any any eq telnet
permit tcp any host xxx.xxx.xxx.xx3 eq www
permit tcp any host xxx.xxx.xxx.xx3 eq 443
permit tcp any host xxx.xxx.xxx.xx3 eq smtp
permit udp any host xxx.xxx.xxx.xx3 eq isakmp
permit esp any host xxx.xxx.xxx.xx3
permit ahp any host xxx.xxx.xxx.xx3
permit udp any host xxx.xxx.xxx.xx3 eq non500-isakmp
deny ip any any
permit ip any any
ip access-list extended OUTBOUND
permit tcp any any eq smtp
permit tcp any any eq 443
permit ip 192.168.201.0 0.0.0.255 any
deny ip any any
DEBUG
CWT-DATA#sh ip nhrp detail
192.168.100.1/32 via 192.168.100.1, Tunnel1 created 1w5d, never expire
Type: static, Flags: used
NBMA address: xxx.xxx.xxx.xx3
CWT-DATA#sh crypto isakmp sa
IPv4 Crypto ISAKMP SA
dst src state conn-id slot status
xxx.xxx.xxx.xx3 192.168.1.7 MM_NO_STATE 2821 0 ACTIVE (deleted)
Jul 4 12:53:35.551: ISAKMP:(2822):Sending an IKE IPv4 Packet.
CWT-DATA#
Jul 4 12:53:45.553: ISAKMP:(2822): retransmitting phase 1 MM_KEY_EXCH...
Jul 4 12:53:45.553: ISAKMP:(2822):peer does not do paranoid keepalives.
Jul 4 12:53:45.553: ISAKMP:(2822):deleting SA reason "Death by retransmission P1" state (I) MM_KEY_EXCH (peer xxx.xxx.xxx.xx3)
Jul 4 12:53:45.553: ISAKMP:(2822):deleting SA reason "Death by retransmission P1" state (I) MM_KEY_EXCH (peer xxx.xxx.xxx.xx3)
Jul 4 12:53:45.553: ISAKMP: Unlocking peer struct 0x835CCCE8 for isadb_mark_sa_deleted(), count 0
Jul 4 12:53:45.553: ISAKMP: Deleting peer node by peer_reap for xxx.xxx.xxx.xx3: 835CCCE8
Jul 4 12:53:45.553: ISAKMP:(2822):deleting node -32418685 error FALSE reason "IKE deleted"
Jul 4 12:53:45.553: ISAKMP:(2822):deleting node 2092182627 error FALSE reason "IKE deleted"
Jul 4 12:53:45.553: ISAKMP:(2822):Input = IKE_MESG_INTERNAL, IKE_PHASE1_DEL
Jul 4 12:53:45.553: ISAKMP:(2822):Old State = IKE_I_MM5 New State = IKE_DEST_SA
Jul 4 12:53:45.585: ISAKMP:(0): SA request profile is (NULL)
Jul 4 12:53:45.585: ISAKMP: Created a peer struct for xxx.xxx.xxx.xx3, peer port 500
Jul 4 12:53:45.585: ISAKMP: New peer created peer = 0x835CCCE8 peer_handle = 0x800025C0
Jul 4 12:53:45.585: ISAKMP: Locking peer struct 0x835CCCE8, refcount 1 for isakmp_initiator
Jul 4 12:53:45.585: ISAKMP: local port 500, remote port 500
Jul 4 12:53:45.585: ISAKMP: set new node 0 to QM_IDLE
Jul 4 12:53:45.585: ISAKMP: Find a dup sa in the avl tree during calling isadb_insert sa = 8333DA70
Jul 4 12:53:45.585: ISAKMP:(0):Can not start Aggressive mode, trying Main mode.
Jul 4 12:53:45.585: ISAKMP:(0):found peer pre-shared key matching xxx.xxx.xxx.xx3
Jul 4 12:53:45.585: ISAKMP:(0): constructed NAT-T vendor-rfc3947 ID
Jul 4 12:53:45.585: ISAKMP:(0): constructed NAT-T vendor-07 ID
Jul 4 12:53:45.585: ISAKMP:(0): constructed NAT-T vendor-03 ID
Jul 4 12:53:45.585: ISAKMP:(0): constructed NAT-T vendor-02 ID
Jul 4 12:53:45.585: ISAKMP:(0):Input = IKE_MESG_FROM_IPSEC, IKE_SA_REQ_MM
Jul 4 12:53:45.585: ISAKMP:(0):Old State = IKE_READY New State = IKE_I_MM1
Jul 4 12:53:45.589: ISAKMP:(0): beginning Main Mode exchange
Jul 4 12:53:45.589: ISAKMP:(0): sending packet to xxx.xxx.xxx.xx3 my_port 500 peer_port 500 (I) MM_NO_STATE
Jul 4 12:53:45.589: ISAKMP:(0):Sending an IKE IPv4 Packet.
Jul 4 12:53:45.653: ISAKMP (0:0): received packet from xxx.xxx.xxx.xx3 dport 500 sport 500 Global (I) MM_NO_STATE
Jul 4 12:53:45.653: ISAKMP:(0):Input = IKE_MESG_FROM_PEER, IKE_MM_EXCH
Jul 4 12:53:45.653: ISAKMP:(0):Old State = IKE_I_MM1 New State = IKE_I_MM2
Jul 4 12:53:45.653: ISAKMP:(0): processing SA payload. message ID = 0
Jul 4 12:53:45.653: ISAKMP:(0): processing vendor id payload
Jul 4 12:53:45.653: ISAKMP:(0): vendor ID seems Unity/DPD but major 69 mismatch
Jul 4 12:53:45.653: ISAKMP (0:0): vendor ID is NAT-T RFC 3947
Jul 4 12:53:45.653: ISAKMP:(0):found peer pre-shared key matching xxx.xxx.xxx.xx3
Jul 4 12:53:45.653: ISAKMP:(0): local preshared key found
Jul 4 12:53:45.653: ISAKMP : Scanning profiles for xauth ...
Jul 4 12:53:45.653: ISAKMP:(0):Checking ISAKMP transform 1 against priority 10 policy
Jul 4 12:53:45.653: ISAKMP: encryption AES-CBC
Jul 4 12:53:45.653: ISAKMP: keylength of 256
Jul 4 12:53:45.653: ISAKMP: hash SHA
Jul 4 12:53:45.653: ISAKMP: default group 5
Jul 4 12:53:45.653: ISAKMP: auth pre-share
Jul 4 12:53:45.653: ISAKMP: life type in seconds
Jul 4 12:53:45.653: ISAKMP: life duration (VPI) of 0x0 0x1 0x51 0x80
Jul 4 12:53:45.657: ISAKMP:(0):atts are acceptable. Next payload is 0
Jul 4 12:53:45.657: ISAKMP:(0):Acceptable atts:actual life: 0
Jul 4 12:53:45.657: ISAKMP:(0):Acceptable atts:life: 0
Jul 4 12:53:45.657: ISAKMP:(0):Fill atts in sa vpi_length:4
Jul 4 12:53:45.657: ISAKMP:(0):Fill atts in sa life_in_seconds:86400
Jul 4 12:53:45.657: ISAKMP:(0):Returning Actual lifetime: 86400
Jul 4 12:53:45.657: ISAKMP:(0)::Started lifetime timer: 86400.
Jul 4 12:53:45.657: ISAKMP:(0): processing vendor id payload
Jul 4 12:53:45.657: ISAKMP:(0): vendor ID seems Unity/DPD but major 69 mismatch
Jul 4 12:53:45.657: ISAKMP (0:0): vendor ID is NAT-T RFC 3947
Jul 4 12:53:45.657: ISAKMP:(0):Input = IKE_MESG_INTERNAL, IKE_PROCESS_MAIN_MODE
Jul 4 12:53:45.657: ISAKMP:(0):Old State = IKE_I_MM2 New State = IKE_I_MM2
Jul 4 12:53:45.657: ISAKMP:(0): sending packet to xxx.xxx.xxx.xx3 my_port 500 peer_port 500 (I) MM_SA_SETUP
Jul 4 12:53:45.657: ISAKMP:(0):Sending an IKE IPv4 Packet.
Jul 4 12:53:45.661: ISAKMP:(0):Input = IKE_MESG_INTERNAL, IKE_PROCESS_COMPLETE
CWT-DATA#
Jul 4 12:53:45.661: ISAKMP:(0):Old State = IKE_I_MM2 New State = IKE_I_MM3
Jul 4 12:53:45.813: ISAKMP (0:0): received packet from xxx.xxx.xxx.xx3 dport 500 sport 500 Global (I) MM_SA_SETUP
Jul 4 12:53:45.817: ISAKMP:(0):Input = IKE_MESG_FROM_PEER, IKE_MM_EXCH
Jul 4 12:53:45.817: ISAKMP:(0):Old State = IKE_I_MM3 New State = IKE_I_MM4
Jul 4 12:53:45.817: ISAKMP:(0): processing KE payload. message ID = 0
Jul 4 12:53:45.989: ISAKMP:(0): processing NONCE payload. message ID = 0
Jul 4 12:53:45.989: ISAKMP:(0):found peer pre-shared key matching xxx.xxx.xxx.xx3
Jul 4 12:53:45.993: ISAKMP:(2823): processing vendor id payload
Jul 4 12:53:45.993: ISAKMP:(2823): vendor ID is Unity
Jul 4 12:53:45.993: ISAKMP:(2823): processing vendor id payload
Jul 4 12:53:45.993: ISAKMP:(2823): vendor ID is DPD
Jul 4 12:53:45.993: ISAKMP:(2823): processing vendor id payload
Jul 4 12:53:45.993: ISAKMP:(2823): speaking to another IOS box!
Jul 4 12:53:45.993: ISAKMP:received payload type 20
Jul 4 12:53:45.993: ISAKMP (0:2823): NAT found, the node inside NAT
Jul 4 12:53:45.993: ISAKMP:received payload type 20
Jul 4 12:53:45.993: ISAKMP:(2823):Input = IKE_MESG_INTERNAL, IKE_PROCESS_MAIN_MODE
Jul 4 12:53:45.993: ISAKMP:(2823):Old State = IKE_I_MM4 New State = IKE_I_MM4
Jul 4 12:53:45.993: ISAKMP:(2823):Send initial contact
Jul 4 12:53:45.993: ISAKMP:(2823):SA is doing pre-shared key authentication using id type ID_IPV4_ADDR
Jul 4 12:53:45.993: ISAKMP (0:2823): ID payload
next-payload : 8
type : 1
address : 192.168.1.7
protocol : 17
port : 0
length : 12
Jul 4 12:53:45.993: ISAKMP:(2823):Total payload length: 12
Jul 4 12:53:45.997: ISAKMP:(2823): sending packet to xxx.xxx.xxx.xx3 my_port 4500 peer_port 4500 (I) MM_KEY_EXCH
Jul 4 12:53:45.997: ISAKMP:(2823):Sending an IKE IPv4 Packet.
Jul 4 12:53:45.997: ISAKMP:(2823):Input = IKE_MESG_INTERNAL, IKE_PROCESS_COMPLETE
CWT-DATA#
Jul 4 12:53:45.997: ISAKMP:(2823):Old State = IKE_I_MM4 New State = IKE_I_MM5
CWT-DATA#
Jul 4 12:53:55.794: ISAKMP (0:2823): received packet from xxx.xxx.xxx.xx3 dport 500 sport 500 Global (I) MM_KEY_EXCH
Jul 4 12:53:55.794: ISAKMP:(2823): phase 1 packet is a duplicate of a previous packet.
Jul 4 12:53:55.794: ISAKMP:(2823): retransmitting due to retransmit phase 1
Jul 4 12:53:56.294: ISAKMP:(2823): retransmitting phase 1 MM_KEY_EXCH...
Jul 4 12:53:56.294: ISAKMP (0:2823): incrementing error counter on sa, attempt 1 of 5: retransmit phase 1
Jul 4 12:53:56.294: ISAKMP:(2823): retransmitting phase 1 MM_KEY_EXCH
Jul 4 12:53:56.294: ISAKMP:(2823): sending packet to xxx.xxx.xxx.xx3 my_port 4500 peer_port 4500 (I) MM_KEY_EXCH
CWT-DATA#
Jul 4 12:53:56.294: ISAKMP:(2823):Sending an IKE IPv4 Packet.
CWT-DATA#
Jul 4 12:54:05.795: ISAKMP (0:2823): received packet from xxx.xxx.xxx.xx3 dport 500 sport 500 Global (I) MM_KEY_EXCH
Jul 4 12:54:05.795: ISAKMP:(2823): phase 1 packet is a duplicate of a previous packet.
Jul 4 12:54:05.795: ISAKMP:(2823): retransmitting due to retransmit phase 1
Jul 4 12:54:06.295: ISAKMP:(2823): retransmitting phase 1 MM_KEY_EXCH...
Jul 4 12:54:06.295: ISAKMP (0:2823): incrementing error counter on sa, attempt 2 of 5: retransmit phase 1
Jul 4 12:54:06.295: ISAKMP:(2823): retransmitting phase 1 MM_KEY_EXCH
Jul 4 12:54:06.295: ISAKMP:(2823): sending packet to xxx.xxx.xxx.xx3 my_port 4500 peer_port 4500 (I) MM_KEY_EXCH
CWT-DATA#
Jul 4 12:54:06.295: ISAKMP:(2823):Sending an IKE IPv4 Packet.
CWT-DATA#
Jul 4 12:54:15.797: ISAKMP (0:2823): received packet from xxx.xxx.xxx.xx3 dport 500 sport 500 Global (I) MM_KEY_EXCH
Jul 4 12:54:15.797: ISAKMP:(2823): phase 1 packet is a duplicate of a previous packet.
Jul 4 12:54:15.797: ISAKMP:(2823): retransmitting due to retransmit phase 1
Jul 4 12:54:16.297: ISAKMP:(2823): retransmitting phase 1 MM_KEY_EXCH...
Jul 4 12:54:16.297: ISAKMP (0:2823): incrementing error counter on sa, attempt 3 of 5: retransmit phase 1
Jul 4 12:54:16.297: ISAKMP:(2823): retransmitting phase 1 MM_KEY_EXCH
Jul 4 12:54:16.297: ISAKMP:(2823): sending packet to xxx.xxx.xxx.xx3 my_port 4500 peer_port 4500 (I) MM_KEY_EXCH
CWT-DATA#
Jul 4 12:54:16.297: ISAKMP:(2823):Sending an IKE IPv4 Packet.
CWT-DATA#
Jul 4 12:54:19.537: ISAKMP: set new node 0 to QM_IDLE
Jul 4 12:54:19.537: ISAKMP:(2823):SA is still budding. Attached new ipsec request to it. (local 192.168.1.7, remote xxx.xxx.xxx.xx3)
Jul 4 12:54:19.537: ISAKMP: Error while processing SA request: Failed to initialize SA
Jul 4 12:54:19.537: ISAKMP: Error while processing KMI message 0, error 2.
CWT-DATA#
Jul 4 12:54:25.794: ISAKMP (0:2823): received packet from xxx.xxx.xxx.xx3 dport 500 sport 500 Global (I) MM_KEY_EXCH
Jul 4 12:54:25.798: ISAKMP:(2823): phase 1 packet is a duplicate of a previous packet.
Jul 4 12:54:25.798: ISAKMP:(2823): retransmitting due to retransmit phase 1
Jul 4 12:54:26.298: ISAKMP:(2823): retransmitting phase 1 MM_KEY_EXCH...
Jul 4 12:54:26.298: ISAKMP (0:2823): incrementing error counter on sa, attempt 4 of 5: retransmit phase 1
Jul 4 12:54:26.298: ISAKMP:(2823): retransmitting phase 1 MM_KEY_EXCH
Jul 4 12:54:26.298: ISAKMP:(2823): sending packet to xxx.xxx.xxx.xx3 my_port 4500 peer_port 4500 (I) MM_KEY_EXCH
CWT-DATA#
Jul 4 12:54:26.298: ISAKMP:(2823):Sending an IKE IPv4 Packet.
CWT-DATA#
Jul 4 12:54:35.555: ISAKMP:(2822):purging node -32418685
Jul 4 12:54:35.555: ISAKMP:(2822):purging node 2092182627
Jul 4 12:54:35.795: ISAKMP (0:2823): received packet from xxx.xxx.xxx.xx3 dport 500 sport 500 Global (I) MM_KEY_EXCH
Jul 4 12:54:35.795: ISAKMP:(2823): phase 1 packet is a duplicate of a previous packet.
Jul 4 12:54:35.795: ISAKMP:(2823): retransmitting due to retransmit phase 1
Jul 4 12:54:36.295: ISAKMP:(2823): retransmitting phase 1 MM_KEY_EXCH...
Jul 4 12:54:36.295: ISAKMP (0:2823): incrementing error counter on sa, attempt 5 of 5: retransmit phase 1
Jul 4 12:54:36.295: ISAKMP:(2823): retransmitting phase 1 MM_KEY_EXCH
CWT-DATA#
Jul 4 12:54:36.295: ISAKMP:(2823): sending packet to xxx.xxx.xxx.xx3 my_port 4500 peer_port 4500 (I) MM_KEY_EXCH
Jul 4 12:54:36.295: ISAKMP:(2823):Sending an IKE IPv4 Packet.
CWT-DATA#no debug all
All possible debugging has been turned offheres the hub debug
CWCH#
*Jul 5 11:58:16.208: ISAKMP: set new node 1382820308 to QM_IDLE
*Jul 5 11:58:16.208: ISAKMP:(2116): sending packet to xxx.xxx.xxx.10 my_port 4500 peer_port 4500 (R) QM_IDLE
*Jul 5 11:58:16.208: ISAKMP:(2116):Sending an IKE IPv4 Packet.
*Jul 5 11:58:16.208: ISAKMP:(2116):purging node 1382820308
*Jul 5 11:58:16.208: ISAKMP:(2116):Input = IKE_MESG_FROM_IPSEC, IKE_PHASE2_DEL
*Jul 5 11:58:16.208: ISAKMP:(2116):Old State = IKE_P1_COMPLETE New State = IKE_P1_COMPLETE
*Jul 5 12:02:47.504: ISAKMP (2120): received packet from xxx.xxx.xxx.10 dport 4500 sport 62560 Global (R) QM_IDLE
*Jul 5 12:02:47.504: ISAKMP: set new node -146383553 to QM_IDLE
*Jul 5 12:02:47.504: ISAKMP:(2120): processing HASH payload. message ID = -146383553
*Jul 5 12:02:47.504: ISAKMP:(2120): processing NOTIFY DPD/R_U_THERE protocol 1
spi 0, message ID = -146383553, sa = 0x854A7094
*Jul 5 12:02:47.504: ISAKMP:(2120):deleting node -146383553 error FALSE reason "Informational (in) state 1"
*Jul 5 12:02:47.504: ISAKMP:(2120):Input = IKE_MESG_FROM_PEER, IKE_INFO_NOTIFY
*Jul 5 12:02:47.504: ISAKMP:(2120):Old State = IKE_P1_COMPLETE New State = IKE_P1_COMPLETE
*Jul 5 12:02:47.504: ISAKMP:(2120):DPD/R_U_THERE received from peer xxx.xxx.xxx.10, sequence 0x63A1AE3C
*Jul 5 12:02:47.504: ISAKMP: set new node -1398198787 to QM_IDLE
*Jul 5 12:02:47.504: ISAKMP:(2120):Sending NOTIFY DPD/R_U_THERE_ACK protocol 1
spi 2242383312, message ID = -1398198787
*Jul 5 12:02:47.504: ISAKMP:(2120): seq. no 0x63A1AE3C
*Jul 5 12:02:47.504: ISAKMP:(2120): sending packet to xxx.xxx.xxx.10 my_port 4500 peer_port 62560 (R) QM_IDLE
*Jul 5 12:02:47.504: ISAKMP:(2120):Sending an IKE IPv4 Packet.
CWCH#
*Jul 5 12:02:47.504: ISAKMP:(2120):purging node -1398198787
*Jul 5 12:02:47.504: ISAKMP:(2120):Input = IKE_MESG_FROM_PEER, IKE_MESG_KEEP_ALIVE
*Jul 5 12:02:47.504: ISAKMP:(2120):Old State = IKE_P1_COMPLETE New State = IKE_P1_COMPLETE
CWCH#
*Jul 5 12:02:52.516: ISAKMP (2120): received packet from xxx.xxx.xxx.10 dport 4500 sport 62560 Global (R) QM_IDLE
*Jul 5 12:02:52.516: ISAKMP: set new node -459292560 to QM_IDLE
*Jul 5 12:02:52.516: ISAKMP:(2120): processing HASH payload. message ID = -459292560
*Jul 5 12:02:52.516: ISAKMP:(2120): processing NOTIFY DPD/R_U_THERE protocol 1
spi 0, message ID = -459292560, sa = 0x854A7094
*Jul 5 12:02:52.516: ISAKMP:(2120):deleting node -459292560 error FALSE reason "Informational (in) state 1"
*Jul 5 12:02:52.516: ISAKMP:(2120):Input = IKE_MESG_FROM_PEER, IKE_INFO_NOTIFY
*Jul 5 12:02:52.516: ISAKMP:(2120):Old State = IKE_P1_COMPLETE New State = IKE_P1_COMPLETE
*Jul 5 12:02:52.516: ISAKMP:(2120):DPD/R_U_THERE received from peer xxx.xxx.xxx.10, sequence 0x63A1AE3D
*Jul 5 12:02:52.516: ISAKMP: set new node -1245354522 to QM_IDLE
*Jul 5 12:02:52.516: ISAKMP:(2120):Sending NOTIFY DPD/R_U_THERE_ACK protocol 1
spi 2242383312, message ID = -1245354522
*Jul 5 12:02:52.516: ISAKMP:(2120): seq. no 0x63A1AE3D
*Jul 5 12:02:52.516: ISAKMP:(2120): sending packet to xxx.xxx.xxx.10 my_port 4500 peer_port 62560 (R) QM_IDLE
*Jul 5 12:02:52.516: ISAKMP:(2120):Sending an IKE IPv4 Packet.
CWCH#
*Jul 5 12:02:52.516: ISAKMP:(2120):purging node -1245354522
*Jul 5 12:02:52.520: ISAKMP:(2120):Input = IKE_MESG_FROM_PEER, IKE_MESG_KEEP_ALIVE
*Jul 5 12:02:52.520: ISAKMP:(2120):Old State = IKE_P1_COMPLETE New State = IKE_P1_COMPLETE
CWCH#
*Jul 5 12:02:55.636: ISAKMP:(2119):Input = IKE_MESG_FROM_PEER, IKE_MESG_KEEP_ALIVE
*Jul 5 12:02:55.636: ISAKMP:(2119):Old State = IKE_P1_COMPLETE New State = IKE_P1_COMPLETE
*Jul 5 12:02:55.656: ISAKMP:(2119):purging node 926310294
CWCH#
*Jul 5 12:02:58.000: ISAKMP (2120): received packet from xxx.xxx.xxx.10 dport 4500 sport 62560 Global (R) QM_IDLE
*Jul 5 12:02:58.000: ISAKMP: set new node -1957053939 to QM_IDLE
*Jul 5 12:02:58.000: ISAKMP:(2120): processing HASH payload. message ID = -1957053939
*Jul 5 12:02:58.000: ISAKMP:(2120): processing NOTIFY DPD/R_U_THERE protocol 1
spi 0, message ID = -1957053939, sa = 0x854A7094
*Jul 5 12:02:58.000: ISAKMP:(2120):deleting node -1957053939 error FALSE reason "Informational (in) state 1"
*Jul 5 12:02:58.000: ISAKMP:(2120):Input = IKE_MESG_FROM_PEER, IKE_INFO_NOTIFY
*Jul 5 12:02:58.000: ISAKMP:(2120):Old State = IKE_P1_COMPLETE New State = IKE_P1_COMPLETE
*Jul 5 12:02:58.000: ISAKMP:(2120):DPD/R_U_THERE received from peer xxx.xxx.xxx.10, sequence 0x63A1AE3E
*Jul 5 12:02:58.000: ISAKMP: set new node -1198504167 to QM_IDLE
*Jul 5 12:02:58.004: ISAKMP:(2120):Sending NOTIFY DPD/R_U_THERE_ACK protocol 1
spi 2242383312, message ID = -1198504167
*Jul 5 12:02:58.004: ISAKMP:(2120): seq. no 0x63A1AE3E
*Jul 5 12:02:58.004: ISAKMP:(2120): sending packet to xxx.xxx.xxx.10 my_port 4500 peer_port 62560 (R) QM_IDLE
*Jul 5 12:02:58.004: ISAKMP:(2120):Sending an IKE IPv4 Packet.
CWCH#
*Jul 5 12:02:58.004: ISAKMP:(2120):purging node -1198504167
*Jul 5 12:02:58.004: ISAKMP:(2120):Input = IKE_MESG_FROM_PEER, IKE_MESG_KEEP_ALIVE
*Jul 5 12:02:58.004: ISAKMP:(2120):Old State = IKE_P1_COMPLETE New State = IKE_P1_COMPLETE
CWCH#
*Jul 5 12:03:03.000: ISAKMP (2120): received packet from xxx.xxx.xxx.10 dport 4500 sport 62560 Global (R) QM_IDLE
*Jul 5 12:03:03.000: ISAKMP: set new node 599666073 to QM_IDLE
*Jul 5 12:03:03.000: ISAKMP:(2120): processing HASH payload. message ID = 599666073
*Jul 5 12:03:03.000: ISAKMP:(2120): processing NOTIFY DPD/R_U_THERE protocol 1
spi 0, message ID = 599666073, sa = 0x854A7094
*Jul 5 12:03:03.000: ISAKMP:(2120):deleting node 599666073 error FALSE reason "Informational (in) state 1"
*Jul 5 12:03:03.000: ISAKMP:(2120):Input = IKE_MESG_FROM_PEER, IKE_INFO_NOTIFY
*Jul 5 12:03:03.000: ISAKMP:(2120):Old State = IKE_P1_COMPLETE New State = IKE_P1_COMPLETE
*Jul 5 12:03:03.000: ISAKMP:(2120):DPD/R_U_THERE received from peer xxx.xxx.xxx.10, sequence 0x63A1AE3F
*Jul 5 12:03:03.000: ISAKMP: set new node 1035716483 to QM_IDLE
*Jul 5 12:03:03.000: ISAKMP:(2120):Sending NOTIFY DPD/R_U_THERE_ACK protocol 1
spi 2242383312, message ID = 1035716483
*Jul 5 12:03:03.000: ISAKMP:(2120): seq. no 0x63A1AE3F
*Jul 5 12:03:03.000: ISAKMP:(2120): sending packet to xxx.xxx.xxx.10 my_port 4500 peer_port 62560 (R) QM_IDLE
*Jul 5 12:03:03.000: ISAKMP:(2120):Sending an IKE IPv4 Packet.
CWCH#
*Jul 5 12:03:03.004: ISAKMP:(2120):purging node 1035716483
*Jul 5 12:03:03.004: ISAKMP:(2120):Input = IKE_MESG_FROM_PEER, IKE_MESG_KEEP_ALIVE
*Jul 5 12:03:03.004: ISAKMP:(2120):Old State = IKE_P1_COMPLETE New State = IKE_P1_COMPLETE
CWCH#
*Jul 5 12:03:08.008: ISAKMP (2120): received packet from xxx.xxx.xxx.10 dport 4500 sport 62560 Global (R) QM_IDLE
*Jul 5 12:03:08.008: ISAKMP: set new node 230166927 to QM_IDLE
*Jul 5 12:03:08.008: ISAKMP:(2120): processing HASH payload. message ID = 230166927
*Jul 5 12:03:08.008: ISAKMP:(2120): processing NOTIFY DPD/R_U_THERE protocol 1
spi 0, message ID = 230166927, sa = 0x854A7094
*Jul 5 12:03:08.008: ISAKMP:(2120):deleting node 230166927 error FALSE reason "Informational (in) state 1"
*Jul 5 12:03:08.008: ISAKMP:(2120):Input = IKE_MESG_FROM_PEER, IKE_INFO_NOTIFY
*Jul 5 12:03:08.008: ISAKMP:(2120):Old State = IKE_P1_COMPLETE New State = IKE_P1_COMPLETE
*Jul 5 12:03:08.008: ISAKMP:(2120):DPD/R_U_THERE received from peer xxx.xxx.xxx.10, sequence 0x63A1AE40
*Jul 5 12:03:08.008: ISAKMP: set new node -1886395474 to QM_IDLE
*Jul 5 12:03:08.008: ISAKMP:(2120):Sending NOTIFY DPD/R_U_THERE_ACK protocol 1
spi 2242383312, message ID = -1886395474
*Jul 5 12:03:08.008: ISAKMP:(2120): seq. no 0x63A1AE40
*Jul 5 12:03:08.012: ISAKMP:(2120): sending packet to xxx.xxx.xxx.10 my_port 4500 peer_port 62560 (R) QM_IDLE
*Jul 5 12:03:08.012: ISAKMP:(2120):Sending an IKE IPv4 Packet.
CWCH#no
*Jul 5 12:03:08.012: ISAKMP:(2120):purging node -1886395474
*Jul 5 12:03:08.012: ISAKMP:(2120):Input = IKE_MESG_FROM_PEER, IKE_MESG_KEEP_ALIVE
*Jul 5 12:03:08.012: ISAKMP:(2120):Old State = IKE_P1_COMPLETE New State = IKE_P1_COMPLETE
*Jul 5 12:03:13.000: ISAKMP (2120): received packet from xxx.xxx.xxx.10 dport 4500 sport 62560 Global (R) QM_IDLE
*Jul 5 12:03:13.000: ISAKMP: set new node 841395293 to QM_IDLE
*Jul 5 12:03:13.000: ISAKMP:(2120): processing HASH payload. message ID = 841395293
*Jul 5 12:03:13.000: ISAKMP:(2120): processing NOTIFY DPD/R_U_THERE protocol 1
spi 0, message ID = 841395293, sa = 0x854A7094
*Jul 5 12:03:13.000: ISAKMP:(2120):deleting node 841395293 error FALSE reason "Informational (in) state 1"
*Jul 5 12:03:13.000: ISAKMP:(2120):Input = IKE_MESG_FROM_PEER, IKE_INFO_NOTIFY
*Jul 5 12:03:13.000: ISAKMP:(2120):Old State = IKE_P1_COMPLETE New State = IKE_P1_COMPLETE
*Jul 5 12:03:13.000: ISAKMP:(2120):DPD/R_U_THERE received from peer xxx.xxx.xxx.10, sequence 0x63A1AE41
*Jul 5 12:03:13.000: ISAKMP: set new node -820358795 to QM_IDLE
*Jul 5 12:03:13.000: ISAKMP:(2120):Sending NOTIFY DPD/R_U_THERE_ACK protocol 1
spi 2242383312, message ID = -820358795
*Jul 5 12:03:13.000: ISAKMP:(2120): seq. no 0x63A1AE41
*Jul 5 12:03:13.000: ISAKMP:(2120): sending packet to xxx.xxx.xxx.10 my_port 4500 peer_port 62560 (R) QM_IDLE
*Jul 5 12:03:13.000: ISAKMP:(2120):Sending an IKE IPv4 Packet.
CWCH#no debug all
All possible debugging has been turned off
CWCH#
*Jul 5 12:03:13.004: ISAKMP:(2120):purging node -820358795
*Jul 5 12:03:13.004: ISAKMP:(2120):Input = IKE_MESG_FROM_PEER, IKE_MESG_KEEP_ALIVE
*Jul 5 12:03:13.004: ISAKMP:(2120):Old State = IKE_P1_COMPLETE New State = IKE_P1_COMPLETE -
Installed itunes and now cant see my cd stations on my computer
so first off thanks for forceing me to install this virus on my computer that completly caused tons of problems for me.
So the problem i have is that i installed Itunes and now i cant see my cd stations i tryed to update the drivers and it doesent work. so what can i do to solve this problem except to format my whole dam computer.
The CD/DVD station that i use is a sony optriac AD7280sHello there, elainefromnaul.
It sounds like your iPod nano has stopped being recognized in iTunes. the following Knowledge Base article offers up some great, in-depth steps for troubleshooting that very issue:
iPod not appearing in iTunes - Apple Support
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
My sister gave me her 1st gen iPad to see if I could solve an issue. It won't turn on, and when it's plugged into a power cord there is a slow pulsing sort of flash that happens on the screen....any ideas?
Try a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. When the screen goes blank power On again in the normal way.] It is absolutely/appsolutely safe! Now see if it charges normally and after a period try to turn it on again. If the batter has been drained it could take 20 minutes or so for it to show that it is charging.
Also considering if the battery need replacing! -
Just turned on my ipad 2 wi-fi , black screen lights up to lighter black but I cant see a thing on it... does anyone have any ideas on what's wrong with it?
Try this First... No Data will be Lost...
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
If no joy... Try a Restore...
1: Connect the device to Your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
Restoring > http://support.apple.com/kb/HT1414
3: If the device doesn't appear in iTunes, try using the Steps in this article to force the device into Recovery Mode -
I have several problems happening at once - please help if you can!
When I connect to iTunes, my iPod starts to sync, but then I get an error message "Cannot synchronize ----'s iPod. Unknown Error (-48)"
It then jumps straight to the Set Up Assistant, as if its the first time I've connected my iPod! (I've had it for a year now). I'm too scared to go through that option in case it wipes the music/video off my iPod.
After all this, my iPod's name Imine) is actually visible in the left side panel of iTunes - BUT, i cant see any of the contents ie songs, video etc.
Funny thing is, I can still load songs & video onto the iPod, and it synchronizes and saves. But, I just cant see anything thats on the iPod (meaning I cant edit or delete, which is annoying), as iTunes only recognizes it as a brand new ipod.
So, what can I do?
I've tried to reset the Ipod, and reloaded iTunes. I've even used an earlier version of iTunes on a different computer and the exact same thing happens there (which leads me to believe somehting happened to the iPod).
I dont want to restore the iPod - I have nearly filled the 160GB capacity and I simply cannot back it up anywhere as no computer i have has enough memory and all my original music is overseas at home.
Why is itunes not recognising the ipod, but it still saves data on it??? How can I bypass the Set Up assistant?? (its irritating).
Please help!!
JJ LAI am also having the same problem. This is my second ipod (I've added a shuffle and already had a nano). The nano works fine. When I connect the shuffle, it is grayed out in the left pane. The main view only shows two tabs, Settings and Contents. It doesn't seem to matter how I have the syncing setup.
-
The bottom part of the screen is like bright it looks all weird i cant see annything in that part my ipod still has the 1 year warranty do u guys think i can get it fix for free or would i have to pay?
Try the following:
- A reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory settings/new iPod.
If you still have the problem that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. If you iPod is defective, within warranty and not abused, Apple will exchange it at no cost. -
how can i sync videos to my iphone 5 using Itunes 11. i also tried to convert the videos to mp4 and drag and drop the file in itunes but still i cant see videos in itunes library.
Copied from this link.
http://www.apple.com/iphone/specs.html
Video formats supported: H.264 video up to 1080p, 30 frames per second, High Profile level 4.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; MPEG-4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format
There are 3rd party utilities available that "rip" content into a compatible format - most include an iPod and/or iPhone format selection. If a video plays in iTunes, iTunes includes an option to convert a selection for iPod/iPhone. -
question ios6 had a edit feature in messages i could hi lite and forward message pic etc in ios7 cant see edit to be able to do the same am i missing a new way to do this or has apple forgotten to include
That certainly doesn't sound right, but it's such a fundamental part of file sharing that it needs further investigation.
First thing to check is whether guest logins are available, and whether you're actually logging in as a guest rather than a registered user when the incorrect password is used.
The server's logs (or Server Admin) should be able to confirm this.
While I might expect an incorrect password to reject the login, if you have guest access you're essentially saying you don't care about authentication anyway, so it might be the issue.
The second thing to check is whether the same happens on other forms of login to the server, e.g. ssh, SMB, etc.
That will help identify whether the problem relates to AFP or something more global on the server (e.g. there may be a local account for userA and userB that's being used rather than the Open Directory account you expect.
Maybe you are looking for
-
Iphone 3gs not being recognised by Itunes 10.1.2 on my Imac
Hi all, This seems to be a common problem but all the posts that say they have succeeded don't work on mine. My problem started when my iphone was not being recognised. I did everything re-installed itunes, restarted computer etc and I finally went i
-
I'm using my ipad2 with iMovie. When I import photos from my pc and try to use them they are huge. Even when I resize them in photoshop they are still huge and unusable. How do I resize them?
-
I would like to create hyperlinks in a PDF file to link to Word, Excel, and PPT documents. Is this possible? Thanks Cheri k
-
How to prevent EFS encrypted files getting green color
hi friends as we know, when we encrypt files via EFS, they get green color so users find out that these are encrypted files. i don't want such thing. is there any method to prevent EFS encrypted files getting green color? thanks in advance
-
P6 8.2 Professional - Job Service Crashes
I have the stand alone version P6 8.2 Professional installed on my computer complete with Job Service and SDK. I have the Job Service configured to run periodically to export a group of projects to a folder on the hard disk. But, the Job Service neve